Hi
i'm trying to pair my Sony ericsson HBH-GV435 BlueTooth headset with my alpine
i'm sure the headset is on paring mode
i added the bluetooth headset in my paired devices without any problems
but when i try to add it as a hands-free/headset setup it tries to connect to the headset and then it says "service discovery was unsuccessful"
i have Jabra BT620s and i'm using it as a hands-free headset and a stereo headset without any problems
but when it comes to the sony ericsson HBH-GV435 it doesn't work :S
please help me
thank you
UPDATE : in the connection wizard i choosed (Explore a bluetooth device to discover the services this headset offers , after choosing the headset it says (retrieving services ...) after that it says that this device does NOT offer any usable services.
keef on mind that i updated my bluetooth stack to make it A2DP enabled and gives also the ability to connect bluetooth keyboard.
i don't really know whats the problem between this headset and the Alpine Bluetooth Stack :S
hi could someone plz tell me if i can hear music thru my blue headset. if yes thn plz guide me with the procedure. my head set only takes calls and the music plays only thru phones speakers. although the headset works fine wid other phones
Your headset must be A2DP compatible for it to play music, I use the Sony Ericsson HBH-DS970 headset with my Diamond - works perfect!
ullas_raj said:
hi could someone plz tell me if i can hear music thru my blue headset. if yes thn plz guide me with the procedure. my head set only takes calls and the music plays only thru phones speakers. although the headset works fine wid other phones
Click to expand...
Click to collapse
Go to your Bluetooth device list: Start -> settings -> connections-tab -> Bluetooth
Then go to edit-mode of the desired bluetooth device (your headphone in this case) and set a mark next to "Wireless Stereo" (assuming your BT headset is A2DP compatible).
my diamond does not detect Sony Ericsson HBH-DS970
Friends, I have the Sony Ericsson HBH-DS970, but it does not detect my Diamond I suggest you do.
I have HTC Tytn2 Kaiser and bluetooth headset Sony Ericsson HBH-PV703. It won't pair.
I tried searching but it won't pair with Sony Ericsson HBH-PV703.
Any ideas?
mine wont pair either - i gave up after 2 bluetooth headsets... i just use the earphones now
Hi, Friends. Good Day.
I have Sony Ericsson Xperia X1 and I use to drive alot. So I have to use Bluetooth Headset. But the problem is my bluetooth headset get disconnected after a while if not in use. But my other friends who use HTC and Nokia didn't face the same problem except for those use other and same model of Sony Ericsson as mine. Please help me.
Thanks in advance.
Anybody here has tried to use the "Hi-Fi Wireless Headset with FM Radio MW600" with the Ameo?
My Ameo has the (German) HTC WM6.0 stock ROM but I want wo try a WM6.1 ROM. I want to make calls with the MW600 bluetooth headset, voice dialing and audio steaming. And caller-id on WM600 display would be very nice.
bluetooth disabled after pairing
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Purzelkater said:
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Click to expand...
Click to collapse
I able to pair this mw600 with my laptop and 2 phones(HTC Touch Pro2 and Sony Ericsson F305).
1) I can answer a call from SE F305 while on movie from laptop/FM/musci from HTC without any prob. The quality of this device SUPERB!!
2)The only prob is with HTC,I can't pair HTC with MW600 while on movie from laptop/FM/music from SE F305. I tried change many option and tweak but hopeless. Anyone have a solution for my problem?Or MW600 compatible multipoint with SE phones only?
TQVM