Does anybody know how to fix this?
charlieb620 said:
Does anybody know how to fix this?
Click to expand...
Click to collapse
uninstall the cabs?
already uninstalled my keys still dont work. i can only use the stylus on the volume menu to turn it up and down
charlieb620 said:
already uninstalled my keys still dont work. i can only use the stylus on the volume menu to turn it up and down
Click to expand...
Click to collapse
which cabs did you install?
i have notice this with alot of vol boasting cabs after unistalling one of them and reboot, my vol button is restored.
i think one of them actually blew my earpiece speaker cuz i couldnt turn it down, now ppl sound like a robot on crack but when i use my wired or bluetooth headset they sound ok
maybe you've installed VAlert, which has a bug that disables volume buttons in volume control..
allthatinny said:
i think one of them actually blew my earpiece speaker cuz i couldnt turn it down, now ppl sound like a robot on crack but when i use my wired or bluetooth headset they sound ok
Click to expand...
Click to collapse
My Fuze arrived sounding like that through the earpiece. I had to exchange it.
Related
So as stated in the title, I can't adjust the in call volume when using the my Jabra BT160 headset. Regardless of how low or high I set the in call volume on the phone, the speaker volume on the headset doesn't increase.
the volume on the headset is all the way up and when I connect it to my motorola w490, i can adjust the volume just fine so the headset is not the problem for sure.
btw im running Open Touch 2.7
I've searched nearly every thread on the forum and tried every possible solution and go nowhere.
Any help?
so I found one last post that I decided to try out and it worked!
xqzmee said:
I found something that seems to improve the quality somewhat but I need others to verify because after playing with some many options I can not longer tell what is good and what is bad
Add the following key, by default it will NOT be there:
HKLM\Software\Microsoft\Bluetooth\AudioGateway\SpkVolume
DWORD:10
You do not need to reset the phone what you need to do is unpair your BT device and then pair it again for the settings to take.
Please try and post results.
Thanks.....
Click to expand...
Click to collapse
vasquja said:
I had this key in the registry already, and it was set to 15. I increased it to 50, and the volume is comfortable for me at this level. This resolved the volume issue.
However, the metallic-like sound is still present, as is the crackle and pop. I guess that is a BT stack issue that will be resolved with an update. I'll keep my fingers crossed for that to happen
Click to expand...
Click to collapse
OMG!! THANK YOU BOTH
This worked on my WING device with Open Touch 2.7 rom
I dont know what the rest of you guys are doing wrong but this worked for me. The d word value Spk Volume [notice the space between spk and volume] was already in my Audiogateway directory set to default 10. I changed that to 50 as suggested by Vasquja . I soft reset and then repaired with my headset and VIOLA!
Problem solved.
Hi, this solution doesn't work on my energy rom.
Have you some other ideas for me?
thanks
with two presses at the headset button you recall the last number
How can i deactivate this function.
If you hear music and put the butten by mistake, that is boring.
Have somebody an idea?
Please, please.
What do you mean with "headset button"?
Such a hardware button does not exist.
TDO
oh ye it does exist? on the cable "hub" of the headset, I've got this problem aswell
carrying a bag arond the shoulder putting pressure on that spot making calls to different people :/
getting tired of coming up with lame excuses for why I'm calling them from out of nowhere!
Should be able to deactive it somehow?
Very annoying indeed. Anyone's got an idea on how to disable this button?
kevinv2u said:
Very annoying indeed. Anyone's got an idea on how to disable this button?
Click to expand...
Click to collapse
Yes open it up and stick a piece of paper under the electric contact.
I have the same problem.
If you press the answer/hang up button on your headset twice you'll going to do a call to the last called person. I actually made a 3:rd call once by mistake during a call and have BIG problems with be sure that i end phonecalls by using a headset.
This sux. Also, the music player hangs and sometimes the phone if I got an SMS or alarm notification while music is playing. If the music player hangs, I have to re-sync the headset bluetooth devices with the phone. that sux also.
I find this an anoying feature as well. Keeping the whole set in your pocket will most likely lead to an accidental call...
Anyone a solution to this?
buciuman said:
Yes open it up and stick a piece of paper under the electric contact.
Click to expand...
Click to collapse
...programmatically.
He he what a surprise was when I was walking on a street n listenin to music n suddenly music stopped n I heard "hello hello are you there??"
Yep that sucks but I think there´s no option how to disable it..perhaps only that way what´s written above
Ok, see I'm not the only one with this problem.
The funny thing is that almost nobody uses the functionality, but everybody is annoyed with it
any sollutions yet, I really hate it
grtz
Would love to find a solution for this too
my button is definitely malfunctioning and activating without any button press. until i can deactivate this thing, leaving the headphones plugged means i'll call someone within a few seconds.
dyna18 said:
Would love to find a solution for this too
Click to expand...
Click to collapse
Since I lost my headset, I no longer have this problem now
if you press the headset button twice, the system will simply run redial.exe in \windows, so you can disable it by replacing any program with the same name that do nothing.
Mine annoyed me so much I pulled the front off the button and ripped the metal contact bit out. It worked, but isn't ideal.
I now have a wicked pair of Jabra BT3030's bluetooth headphone receiver and I love it. Much better!
i installed Total Commander an simply edited the Redial.exe .. after nearly throwing the phone out of the window..
PS. i know the thread is old but maybe there are still ppl looking for a solution to that problem just like i was ten seconds ago
Same here.
There are other threads about this problem.
Still looking for a solution like, let's say a registry hack that disables the headset button...
HELP
Is there any program to reduce the in call ear piece volume. I have to keep the phone at least 20 cm away from my ear during the call even the volume is minimized.
There is a bug report about this problem. I was just wondering does anybody know any program or solution to this problem, because there is nothing happening about the official bug report.
uhmmm, turn the volume down ??
i have the same problem. with CMs rom the in call volume dont seem to work
Same here with CyanogenMod...
that search button must be getting quite dusty... http://forum.xda-developers.com/showthread.php?t=620956
Meltus said:
that search button must be getting quite dusty... http://forum.xda-developers.com/showthread.php?t=620956
Click to expand...
Click to collapse
What seach??? Never heard
Thank you, i test it.
When I double tap my headset button on my headphones, my HTC One calls back the last number I called. Any solutions?
I use Poweramp and Ultimate Ears for my headphones
T3hBraveBoss said:
When I double tap my headset button on my headphones, my HTC One calls back the last number I called. Any solutions?
I use Poweramp and Ultimate Ears for my headphones
Click to expand...
Click to collapse
There are many applications on play that let you to configure the headset buttons.
dadrocker said:
There are many applications on play that let you to configure the headset buttons.
Click to expand...
Click to collapse
Used a few, didnt work its something with sense thats causing it
T3hBraveBoss said:
Used a few, didnt work its something with sense thats causing it
Click to expand...
Click to collapse
i use poweramp + Jays headset control
osiriskidd said:
i use poweramp + Jays headset control
Click to expand...
Click to collapse
Still doesn't work, did you do anything special with the settings?
It still skips the some but then will make a phone call first
Hi guys! Need a solution or a direction to further dig the problem.
The issue: Navigon directions are barely heard on my car stereo via bluetooth. Music sound volume over bluetooth is ok, call volume too. There are separate volume adjustments within the app's Iphone version (system and Navigon) that are not present in Android.
Device: HTC One Dev Ed, stock 4.2.1 rom
Thanks!
Luftwaffe said:
Hi guys! Need a solution or a direction to further dig the problem.
The issue: Navigon directions are barely heard on my car stereo via bluetooth. Music sound volume over bluetooth is ok, call volume too. There are separate volume adjustments within the app's Iphone version (system and Navigon) that are not present in Android.
Device: HTC One Dev Ed, stock 4.2.1 rom
Thanks!
Click to expand...
Click to collapse
Same problem here, nobody?
Or maybe if TS gets to read this, did you solve it?
Priknr1 said:
Same problem here, nobody?
Or maybe if TS gets to read this, did you solve it?
Click to expand...
Click to collapse
Nope. The problem is within android Bluetooth, there are rumors that it is going to be solved in key lime.
Luftwaffe said:
Nope. The problem is within android Bluetooth, there are rumors that it is going to be solved in key lime.
Click to expand...
Click to collapse
I did find that while voice is speaking (press the icon in the bottom left to make it speak) you can press the volume up. The internal app volume will then increase.
Priknr1 said:
I did find that while voice is speaking (press the icon in the bottom left to make it speak) you can press the volume up. The internal app volume will then increase.
Click to expand...
Click to collapse
Thank you. Well, I think I've tried everything, including your tip, in vain. For now I am not using Navigon.