Database Develop

Wake up! Diamond! :-(

Hi all the xda guru. Many people like me experienced a problem of HTC Diamond:
In standby mode, if a new SMS comes in. Diamond won't make any sound an vibration even THEY HAVE BEEN SET in the "Sounds & Configuration". I tried to disable the TouchFLO3D, and this problem won't happen again.
Is this a bug? Anyone is developing a fix to this problem?????
Thanks!!!

Yes I have the same problem. The phone won't ALWAYS...but SOMETIMES only vibrate when the screen is off. However, whenever I turn the screen on, it will vibrate and notify me. Just a minor glitch I suppose!

wait for the rom-upgrade. hope allthe problems will be solved..

ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to be enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread

SecureGSM said:
ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread
Click to expand...
Click to collapse
Thanks man! Is there one for email..or?

it supposed to FLASH LIGHT for you for 5 minutes by default instead of waking up phone to that.. that should be logically enough to alert you. If it does not, I would also add to that:
Settings-->Sound and notifications-->Notifications -->Messaging: New e-mail message:
1. Play sound (choose one) or even repeat as well.
2. Display message on Screen
I hope it helps.
Is there one for email..or?
Click to expand...
Click to collapse

SMS wake up!!!!!
SecureGSM said:
ok. SMS wake up is disabled by default in registry. thats in HKLM\drivers\builtin\ril
as far as I am remeber. I will confirm soon. that needs to be enabled.
I see the reason for this though:
if you phone wakes up to SMS it shortens the battery life for you.
EDIT:
HKLM\Drivers\BuiltIn\RIL :
DisableSMSWakeUpEvent <-- set to "1" by default. meaning NO wake up to SMS message
Change this value to "0", soft reset you phone and verify that value is correct.
I hope it helps.
P.S. please add this to Diamond Tweaks thread
Click to expand...
Click to collapse
May i know how can i get into the registry to change the setting?

keith83 said:
May i know how can i get into the registry to change the setting?
Click to expand...
Click to collapse
Use a program called resco registry editor
Can download it from here:
http://www.resco.net/pocketpc/explorer/
Download the file...connect your phone to the pc and click on the downloaded file and it should install onto the phone.

SecureGSM said:
it supposed to FLASH LIGHT for you for 5 minutes by default instead of waking up phone to that.. that should be logically enough to alert you.[
Click to expand...
Click to collapse
I can confirm this. On new email the light flashes. But now, for me, suddenly it doesn't, anymore (it flashes AFTER I turn it on which makes not too much sense). Can anybody help? I think I checked everything and also I didn't change a setting. Somehow it does not react to new email until I switch it on. Of course I only use standby and not turn it off completely with long push on the button.
Regards,
Frank

frankmuel said:
I can confirm this. On new email the light flashes. But now, for me, suddenly it doesn't, anymore (it flashes AFTER I turn it on which makes not too much sense). Can anybody help? I think I checked everything and also I didn't change a setting. Somehow it does not react to new email until I switch it on. Of course I only use standby and not turn it off completely with long push on the button.
Regards,
Frank
Click to expand...
Click to collapse
Are there any fixes for this yet? Having to turn the phone on (out of sleep) to see if there are emails when it should alert you makes auto email retrieval kinda pointless.

Wake on e-mail!
Bump...
Wakeup on e-mail.
Is there a way to wake-up the Diamond when i get an email message?
So far I have to check manually if there is email. No wake-up, no sound.
I hope there is a way...
K

KraFT_mk said:
Bump...
Wakeup on e-mail.
Is there a way to wake-up the Diamond when i get an email message?
So far I have to check manually if there is email. No wake-up, no sound.
I hope there is a way...
K
Click to expand...
Click to collapse
Bump (sorry for the old thread).
Is there a way to wake up the Diamond when it's in standby when you receive a new email (either push or via Windows Live)?

i posted this in another thread and it works for me.
http://forum.xda-developers.com/showthread.php?t=427459&highlight=email+wake&page=2

mate hows ur phone?

Text message unlocks phone

When i receive a text message my diamond unlocks automatically? Is there any way to avoid this? Can get expensive if i don't hear the text message and the phone in my pocket calls somewhere or something...
Using latest Dutty 3.6b i think it is..
Any help is appressiated
/C

Advanced config solved it

Which config option did you use?

yeah ive noticed this!!!! how did you solve? im on same rom and use S2U2

yeah, i'd like to know the option too. mine used to light up so i could see the summary of the message for a few seconds. now it doesn't. it could be the same option.

To disable/enable wakeup use this advanced config option: Messaging/Wake up on new SMS.
Diamond TF3D config also can change this.

You can use any registry editor;
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
Change value to "0"

kosherpig said:
To disable/enable wakeup use this advanced config option: Messaging/Wake up on new SMS.
Diamond TF3D config also can change this.
Click to expand...
Click to collapse
I don't see such an option in ACT.

In version I have on my phone it is present:
And as far as I remember I downloaded it from this site.

kosherpig said:
In version I have on my phone it is present:
And as far as I remember I downloaded it from this site.
Click to expand...
Click to collapse
what version you got i have 3.3.0.0 and i do not have that option?????

apaquette420 said:
what version you got i have 3.3.0.0 and i do not have that option?????
Click to expand...
Click to collapse
Indeed. Same here.

camakus said:
You can use any registry editor;
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent
Change value to "0"
Click to expand...
Click to collapse
I dont have that registry on my rom..?

Seems 3.2 has it.

Odd
I think it's odd to remove this option when updating you're program/utility. Well i'll just change it in registry then.
Thanks for your help!

Can not get phone to NOT wake up when text comes in
I have tried a number of different things to try to STOP the screen from waking up on a new text message. I have tried everything except the older version 3.2.. of the advanced config utility. I have a Sprint version of the diamond. The Disablesmswakeupevent does not work on my system. It does not show up in the registry and when I create it, it still does nothing. This seems like such a silly thing to not have the option of adjusting in the oem configuration. The Pro has it, why not the non-pro version.
Many thanks for anyone that has a suggestion on how to get this screen to STAY OFF when a text comes in. Perhaps even a lock on incoming text that will be unlocked by the light sensor.
-Jeff

[Tweak] Enable more settings for WM Notifications

This is a collection of registry tweaks to allow greater control over the notifications in WM, including the ability to prevent repeating sounds for reminders. What it does is enable the controls in "Sounds & Notifications" that are normally unavailable for several types of notification.
It's a further enhancement of Juggalo_x's enhanced notifications, which has never been updated or particularly well explained (at least not on this website!) ... I have also included the low battery tweak, as suggested by juiceppc in that thread.
Large credit goes to fredjones32 for this guide with an explanation of the registry values and how the repeat check box can be enabled.
These are the notifications included:
ActiveSync: Begin sync
ActiveSync: End sync
Beam: Autoreceive
Connection disconnected
Connection established
Low battery
Messaging: Downloading MMS
Messaging: MMS downloaded
Messaging: MMS sent
Messaging: New e-mail message
Messaging: New MMS
Messaging: New MMS report
Messaging: New text message
Messaging: Sending MMS
Phone: Missed call
Phone: Voice mail
QuickGPS
Reminders
Wireless network detected
NB: Installing this CAB will turn off all notifications for all of the above events. If you go into Sounds & Notifications you will be able to turn on the ones you want again. This happens because the 'repeat' checkbox cannot be enabled without changing the registry value that controls which notifications are set. It is difficult to preserve the previous values during a simple CAB installation - but if anyone knows of a way please let me know. Detailed settings, for example sound file names, are not lost.

thanks mate
Hi Dave!
Thanks for this great piece of enhancement for all of our diamonds
I'm going to look into it!
Have a great weekend
Regards
Jeroen

Thanks Jeroen, let me know what you think.
you have a good one too!

Davey101 said:
Thanks Jeroen, let me know what you think.
you have a good one too!
Click to expand...
Click to collapse
Hi Dave! Thanks for your reply
I tested it yesterday...it's working great, except for one thing
I'd configured the notifications for text messages. I used the option repeat which was also available, so than I wont have to miss the alert about my messages...
But what happened, I heard every ten seconds my alert, I opened my message and It just went on and on and on....even though I already opened and read my text....that's quite strange/odd.....(hope you'll understand what I mean)
Did you had same behaviour on your device??
For the rest..I really really found it useful!
Many thanks again and I hope everybody is going to like it, just as I do!
Cheers
Jeroen

Hi Jeroen,
I don't use the repeat setting - I was mainly interested in being able to turn the repeat off for reminders! I use SPB Phone Suite on my phone, which allows you to configure sounds that repeat every few minutes until the original notification has been dismissed. The beauty of that system is that it is all configurable by profile, so when the phone switches itself into night mode the repeating sounds are turned off. It's not free but there must be some alternatives.
I've just had a play with the normal repeating sounds and you're right, they're particularly ****ing useless.

thanks I really needed that

Davey 101,
Thank you for compilations.

Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.

Galvatron said:
Davey 101,
Thank you for compilations.
Click to expand...
Click to collapse
mitsi said:
Davey,
Thanks for this application. I've used a couple of your applications/suggestions before (I can't remember which one - bluetooth perhaps) and they all work great. Thanks for your great contribution.
By the way, I have installed this and it works on WM6.5 too.
Click to expand...
Click to collapse
Thanks, that means a lot.

thank you for developing this. now i won't have to go climb a bell tower. those repetitive reminders were more than just annoying while i was on a call driving and couldn't shut it of.
thanks again.

Turn off led
Davey101 how to turn off led light notifications, because this .cab is only unblocking options

any-way of making this work when phone is turned to vibrate mode? works great when phone is in ring mode for me!

New Text message - no sound

Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.

Same problem here, but with new MMS. SMS notification works normally.
MMS work with the new ROM.
But the MMS notification has no sound and no vibration, even if checked in the settings.

me again
I just found out that the same problem happens when I get a new Email message - the device makes lights but no sound even though I set it to at the events area in windows mobile settings. When I press the play buttin there it playes the sound perfectly.
HELP PLEASE

Had the same problem, I managed to set an inbuilt ringtone. Maybe it is not as good as my own, but at least I can hear anything. Search for it.

Is the Wake up from new SMS enabled?

it is enabled
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
yes it is, but it does not seem to be working.
when i get a nes sms or email the phone just lights its round button.
and i am using a builtin ringtone. it calles Alert-Glass2

maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
where can i enable wake up on new SMS?

murata said:
where can i enable wake up on new SMS?
Click to expand...
Click to collapse
you need diamond tweak for that - but as i said, it doesnt seem to work

help
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
Please Help ME...

ididid said:
Please Help ME...
Click to expand...
Click to collapse
I had problems with AZTOR rom and now i using Vic rom and i have no more problems with SMS.
maybe you can also try it.

rom cahnge
Cant change rom. If ill do it i will lose my importer warranty.

ididid said:
Cant change rom. If ill do it i will lose my importer warranty.
Click to expand...
Click to collapse
could you tell us wich rom version you are using at the moment

I am using Alarm4 if this does matter.
Tried my procedure?
kosherpig said:
1. Open TF3D Settings tab
2. Choose Sounds
3. Toggle last option two times (so it goes back to your current passing another)
4. Click More (right softkey)
5. Go to the second tab
6. Choose New SMS sound
7. Select some inbuild ringtone
8. Click OK
9. Repeat steps 4-8 skipping step 7
10. Test it.
Click to expand...
Click to collapse

me again
murata said:
could you tell us wich rom version you are using at the moment
Click to expand...
Click to collapse
ROM: 1.93.456.2 WWE
date: 7/10/08
ExtROM: 1.93.456.21

sorry for my bad english...
actually, i ever had this problem before, it is:
in the events area in windows mobile settings. if you press the play button, it playes the sound perfectly, but when a message is received, there is no alert sound...
that's because i changed the sms mode from "chat mode" to the traditional one (i just don't know how to express this, but i think you can understand) and when i change this back to normal, the sound comes back again
hope this can be helpful

Are these not working ringtones in MIDI format?
Just noticed setting a certain MIDI ringtone makes all MIDIs for this event fail.
(I switched to WMA and I am happier than with MID )

enable vibra
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
TRY: settings --> sounds&notifications --> notifications (tab) --> Event: Messaging: New text message and check the "Vibrate" checkbox. Worked for me after updating rom 1.97 to 2.03

time is off

hey guys
i have the touch it x nuts flashed
i notice that the time for text messages and missed calls is off
(e.g. when someone sends me a text msg at, say, 8pm.. it will show on my phone that the text is received at 5pm or something)
does anyone kno how to fix this? i have the time and date for my phone set correctly. ive also used synchrotime to make sure its right too
thanks

I have the same problem too, I've tried changing the "visiting" time in Clocks & Alarms and it works on some ROMs.. not 6.5.3 though.

Tremayne024 said:
I have the same problem too, I've tried changing the "visiting" time in Clocks & Alarms and it works on some ROMs.. not 6.5.3 though.
Click to expand...
Click to collapse
i've finally found the fix for it
Go to your registry "HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\"
then create a dword key "TrustTimeZoneField" with dword value of 0
hope that helped