is there a way if any program needs connection the wifi to turn on and after exit of the program the wifi to turn off (not waiting 2-3-4min if there is no usage to turn off then)?
I have turned off the wifi for the battery life reasons, so when I need it any time I have to go into comm.manager and so on....
I'm actually using phoneweaver (not free), you can set profiles to switch on/off wifi at specific times. I can turn wifi on, but for some reason can't turn it off automatically, guess I'm a bit dumb to set it correctly, but it works for me.
there's another software called wifilocations (free), it seems to turn on/off wifi based on cell id's, haven't tried it but might work for you
I personally have set a hardware button to act as Wifi on/off (with AEBPlus) and just toggle it with a double press when I need it and when I'm done.
There is a wifi button on the keyboard (right arrow button)
True, I usually forget about that one. But then, I don't want to open the phone to turn Wifi on/off.
Prepare for something magical...
Ok so this isn't magical, in fact, it's just another .cab that you can remapp a button to, that's what I have done and I just toggle wifi on and off using it. Here is the .cab.
Somewhat related but does anyone know if it's possible to turn the phone off but leave wi-fi on ? If I'm at home, I want to have Skype running and receive calls like general mobile calls. Would also like to be available with Messenger too
C
Download KaiserTweak, it has an option to keep wifi on during standby.
Perfect thanks however .......
Anyone know how I can run Skype and/or WLM in background ? They seem to shut when I click X on them
C
Check you don't have a 3rd party program or HTC task manager set to "close" instead of "minimize" when tapping X.
Related
Hi
Is anyone aware of any software that automatically turns wi-fi on and off, for example:
- by location: turn wi-if on at home/work and off when outside these locations
- when available: when internet is accessed turn wi-fi on, if access point available connect, else turn off again.
etc.
Thanks!
auto profile, use Phone Alarm
saquib said:
Hi
Is anyone aware of any software that automatically turns wi-fi on and off, for example:
- by location: turn wi-if on at home/work and off when outside these locations
- when available: when internet is accessed turn wi-fi on, if access point available connect, else turn off again.
etc.
Thanks!
Click to expand...
Click to collapse
Yep, try Phone alarm, works perfect with time based profile switching and location based switching. My must have for any WM phone. Trial advaliable before you buy.
see http://www.pocketmax.net/phoneAlarm.html
Cheers
Fadge
Too bad this is a today screen based plugin, which doesn't work icw TouchFlo3D. And ... it doesn't work automatically. I would also like wifi to turn on the moment I park my car in front of my door
Have a look at "Secondtoday" this app should allow you to use phonealarm on touch diamond.
rtoussaint said:
Too bad this is a today screen based plugin, which doesn't work icw TouchFlo3D. And ... it doesn't work automatically. I would also like wifi to turn on the moment I park my car in front of my door
Click to expand...
Click to collapse
Sounds like you want "GPS-triggered" events, not automatic events. If someone would develop a GPS app to trigger certain things based on location, that would be awesome. But I guess the trade off would be battery-life. How long would it take to kill the battery if GPS were active all the time?!?!?!?!
similar to navigating via GPS (okay without display turned on -> maybe a few minutes more)
with standard battery pack something about 3-4h...
not realy usable imho;D
Yeah, that's probably true ... Couldn't it work on cell phone signals?
A silly question by a new user: how is it possible to stop an internet or data connection (no matter if hsdpa, edge, gprs) once started?
Thanks
use 'long key press' in settings, can be set to disconnect a data connection (sdpa, edge, gprs)
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
jack1985 said:
Use this program:
http://rapidshare.com/files/173250379/GPRS...onnect.CAB.html
The connection stop after 1 minutes of inactivity
Click to expand...
Click to collapse
faulty url!
take this one:
GB-SOFT GPRS-UMTS_Tweak_WM6.1_Diamond
there you can choose the idle-time for disconnect
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Poker85 said:
Anyway the manual stopping mode is to tap the bar that is on the top of the sceen...than tap the G E 3G or U icon and so you can tap disconnect.
Click to expand...
Click to collapse
Cool, also in stead of holding the end call button, wich locks the phone in my case,
Dubbelclicking the end call button alse ends my edge connection.
In order for your end key to stop the connection, you have to go to Settings>System>Long Press End Key>Select Terminate data connection
Then when you press and hold your end key, it will end the connection
if you prefer to stop internetconnection by shortcut, try VJKeyPress.exe 126
this one toggles internet connection
i've searched and i've searched and i cant find the resolve!
after retrieving hotmail, the connection stays active, meaning bars are lit up. for HOURS after unless i long-press-end key or something like that. even when i am surfing the web, after a page is fully loaded, the bars stay lit. on my old diamond, the bars used to go gray or "dormant" etc. therefore no tweaks i have found help (i.e. most operate with this rule "if the connection is dormant/inactive for xx minutes, turn off data" etc. well my connection remains ACTIVE unless i manually intervene)
what is causing this??? i only have spb mobile shell and spb phone suite installed. stock ROM.
hello? anyone? NO one is having the same issue or can help with this??? at this point i'd even be happy with a rude comment about how i should learn how to search coupled with a few links to threads which contain the answers! :\
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
number16 said:
I'm not sure I understand your question.
You're saying the connection stays alive after using mail or opera?
By default, WMo does not turn off data connection, so once you've made a data connection, it stays on.
Now, there are lots of programs out there that turns off data connection after a pre-set time. If you have Advanced Config on your Diamond, it's somewhere in there as well (I use SKTools and not Advacned Config so I can't point you exactly where, but it's there)
That said, many have tested battery drain and find that leaving the data connection ON or OFF makes absolutely no difference on the battery drain. It's only when you're transmitting data that drains more battery. Not sure if that's where you're coming from to want to turn off data connection
Click to expand...
Click to collapse
number16, my savior! i'll try to explain as best i can: when the data connection is started/being used, those left-right arrows appear above the signal strength, correct? what i call "active" is when those arrows are lit (presumably when data is actually being transferred). what i call "dormant" is when the arrows are still there but are gray/not lit (i.e. connection is still open, but not currently transferring data). well, up until a 2 wks ago, all seemed fine - the arrows would briefly stay lit when downloading a page, connecting to hotmail, etc, but then would go gray once the transfer was complete. now however, the arrows stay lit. sometimes for hours at a time even tho nothing is running, no data (that i know of) is being transferred, etc.
so what i was saying is that, yes, i know i can long-press-end key to shut it down, but that only works if i notice it otherwise it's just draining my battery. (most times it is in my pocket, and since it checks hotmail periodically, the data connection may open and stay on without me noticing). and yes, i know about advanced config setting (and actually, i DO have it set to turn off after a minute) BUT that only applies if "connection is not active for more than a minute". i.e. since my whole problem is that my data connection technically stays active, that advanced config setting doesnt work.
so my question is, what is keeping the connection active? why is it doing this? i am running stock ROM and only have spb mobile shell and spb phone suite loaded. and a few other minor tweaks via advanced config/regedit. i even tried spb wireless monitor to see what was active after a data transfer was complete (as far as i could tell) but it didnt really tell me anything.
does all that make sense?
thanks for any help you can provide...
Hey,
Love Tasker, like love it...but, some of the things I'd like to do, the major ones, just aren't working out....it's probably me not setting them correctly, don't know...
So I need something simple really...
- Come home, turn wifi on, connect, turn mobile data off (would prefer to turn to GSM from WCDMA Auto but not sure if you can without root...)
- Leave home, wifi off, mobile data on...simple in theory...
Have tried locale based (gps) profiles, wifi near, cell locale...to not much avail...if just swaps back and fro, doesn't know whats going on. So I'm just seeing if anyone has been able to do this easily and efficiently...
Cheers.
I recently raised this myself. Basically the issue is that Google no longer allow apps to turn WiFi on or off. As such, that kind of profile won't work.
I have been looking for internet all these days, everywhere to autosync my device when device is sleeping and wifi is off but couldnt find any working solution as yet.
Tasker should turn on wifi, auto sync then turn auto sync off and wifi. I tried all that I could, but not working.
Anyone can help me with this over here ?
I do have a working autosync profile but for me in order to get it to work, I needed synker and secure settings, because Taskers WiFi action does not always work. If you would like me to share it with you, let me know.
It also takes other things into account as well.
I do have secure settings already. Do share how you do it given your device is sleeping and even WiFi is turned off
OK you can download my profile here, since it would be better, rather than explaining it.
https://drive.google.com/file/d/0B8M8tLEXhDNZQU9XMkV2Qm1RREk/view?usp=drivesdk
I need synker with this ?
Thats correct. But you can try taskers sync option.
Hi, I tried this profile, unfortunately its turning on my data when I am home and Wifi is available. Though I am not sure if its turning on my Wifi while its turned off, I would want to ensure my data stays off. What are the changes I need to make ?
If you wish to remove the mobile data aspect of it altogether you will need to delete, all actions from 9 to 15, then add stop and add end if at then end of the task.
Also it does check to see if wifi is off first and if it is, it will switch it on.
My WiFi is on, but I ensure when screen is off, Wifi stays disabled. And for some reason its not turning back the WiFi when screen is Off. Dont know why
Unfortunately I am in the same boat at the moment, and I have not found anything to resolve this.
I also started my own thread some time ago about it, but I haven't had anyone give me an answer to solve it nor suggest what could cause it.
@ProudRed
UPDATE: I think I might know what the problem is, I have added wake device command at the beginning of my task,via plugin called secure settings > actions > wake device. I will find out tomorrow if this actually works.
I can confirm that adding the plugin > secure settings > actions > Wake device, solves the problem for me. Apparently you shouldn't need this if you adhere to this page http://tasker.dinglisch.net/userguide/en/androidpowermanagement.html
But for some reason it still does not work for me even if I whitelist tasker and it's plugins from 3rd party battery saving apps like amplify or powernap.
The issue I am having is with connecting the wifi, its getting connected but gets disconnected after 5-10 seconds. I have even tried ensuring that screen keeps on for 2 minutes, even after that Wifi is getting disconnected. Can I have an working profile from you without the mobile data part ? May be I am doing something wrong.
Hi
Often on my galaxy A5 2016 rooted I see that a task is active but it doesn't really active the function on my phone...
For example: I've a task to turn wifi on when I'm at home (based on location). Often the task is active (is green on tasker) but wifi isn't turned really on! Why this??
copeppe said:
Hi
Often on my galaxy A5 2016 rooted I see that a task is active but it doesn't really active the function on my phone...
For example: I've a task to turn wifi on when I'm at home (based on location). Often the task is active (is green on tasker) but wifi isn't turned really on! Why this??
Click to expand...
Click to collapse
On my s8 I've had to turn on reliable alarms for when screen is of as I noticed that some profiles like turning Bluetooth on weren't working when the screen was off. Maybe that could help turning this on in the settings?
Sent from my SM-G950F using Tapatalk
mgdorbit said:
On my s8 I've had to turn on reliable alarms for when screen is of as I noticed that some profiles like turning Bluetooth on weren't working when the screen was off. Maybe that could help turning this on in the settings?
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Maybe... but can you explain me better what alarms I must turn on?
copeppe said:
Maybe... but can you explain me better what alarms I must turn on?
Click to expand...
Click to collapse
Go to preferences > monitor > Use reliable alarms. I have mine set for screen off
Location is not a reliable trigger (never was for me).
Try using variables. These are better.
For example.
I'm using 2 variables to CONFIRM I'm at home and trigger my home profile.
First... I use Cell near to verify the proximity and enable my WiFi. So my variable is set to "1".
Then... After my phone connects to my network I set another variable to "1".
When both variables are equal to "1" my home profile kicks in.
This way I do not rely on Location (and my power consumption is lower).
Sent from my LG-D855 powered by Aosp Extended and Tapatalk.
So the way tasker works is when a profile activates, the entry task runs, then when the profile deactivates the exit task runs.
If something interferes with the entry task, or if you have profiles that overlap (changing the same settings for instance) the profile will be active, but the desired actions may not be able to run.
However, when it comes to wifi on/off actions, you have to do a few things to ensure the actions can run.
1. Make sure you give yourself enough time to enable wifi before continuing.
Eg: 1. Turn on wifi
2. If connected to my home ssid do the following
This will never work because tasker enables the wifi and immediately goes to the next action, but you need at least 5 seconds (really 15) to connect, so it will never be connected when if statement is checked
2. Or say you want to disable wifi every time The wifi is disconnected from any ssid and whenever you're in range of your homer ssid another profile turns on wifi.
The following WILL NEVER WORK but will take a long time to realize the simplicity of why if not careful
If wifi=on and wifi is not connected
Disable wifi and do these things
The reason is the home profile will always enable wifi and for 15 seconds the disable WiFi profile will trigger because the wifi is on but not connected...so it'll disable WiFi.. which will... you get the idea.
P.s. if the profile is active then reliable alarms has nothing to do with why the actions didn't run. Tasker correctly activated the profile... something interfered elsewhere