Hi,
I was use a sim-unlocker from cnomex and change the sim in my phone.
I get the message
"network is locked, Please input unlock code"
Any advice ?
Phone is locked...
If you're getting this message, it means your phone is still network locked (SIM lock), so your unlocking software either hasn't worked, or it's the wrong software for your device.
Check out the 'ROM Development' section, or the Diamond Wiki. I would give you a direct link, but I can't remember exactly where I saw the thread
Related
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Maybe you should read the WIKI to start. But I used KaiserUnlocker to unlock my sim card, but that is what I did. You do what you want, but I would first suggest again that you READ THE WIKI.
maansii said:
I HAVE ATT TILT
IN BOOTLOADER MODE IT SHOWS
KAISI*0
SPL-1.56.0000
CPLD-8
How can i unlock it? if I put any other sim rather then ATT its show SIM LOCK
Please help
Thanks
Click to expand...
Click to collapse
just like kdkobes said please read the wiki. The question you ask has been answered many times, trust me i asked it. but the info is there.
and secondly, if you got the phone "legally" and are an att customer all you had to do is dial "611" from your phone get in touch with att and they will give you the sim unlock code for your device ... ; just tell them you are going oversees (use a country like pakistan were att doesn't provide service) and need the unlock code .. i did it and they gave me the code in 5 minutes. Or you can use pof's hardspl which will unlock your cid and sim install olipro's spl (enabling u to flash new roms to your phone).
But going back to statment one, please read the wiki
cheers,
sire
Calling AT&T vs. HARDSPL
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
jdmba said:
If you get AT&T to give you a SIM Unlock code, do you still need to run HARDSLPL to install a cooked ROM?
Click to expand...
Click to collapse
Yes. There you got your free answer without needing to search. Everyone gets one.
SIM Unlocking just allows you to put any GSM carriers SIM card in your phone and it will work. HardSPL changes the boot loader so you can update the Roms.
Even after doing the Hard SPL the device is asking for unlock code if I insert a foreigh sim card.
I tried doing the USPL also. Same results.
After Hard SPL I also tried to install Touch_IT_wm6.1_Full_-Herald_P4350.zip ROM. It installed well but show same SIM locked error.
Please let me know the steps to start fresh and unlock the phone for international usage. I also wanted to load custom rOM but as SIM not supporting so not able to proceed further.
Apreciate any help in this regard.
Device: T Mob Wing (HERA110)
HardSPL is a cid unlock which does not sim unlock the phone. Seeing as how you have a tmobile wing, you should call tmobile and ask them for the unlock code. Just tell them you're going out of country
I'm on Eclair (2.1), rooted, got the unlock code for my phone. But since I didn't have another network sim card at the time, I tried the "re-lock" method to unlock. Seemed to work at the time. (Didn't know that this method just adds another "accepted" sim card to the internal list.)
Just got another carrier's sim card, and when I put it in and booted, it did not ask for the unlock code. Voice calls work, but the "Network Lock" is still "ON". I've tried "re-locking" to several other MCC/MNC codes, but I never get the unlock prompt.
Does anyone know how I can force my phone to ask for the unlock code?
Or, how do I turn the "Network Lock" off?
Unlock
software_samurai said:
I'm on Eclair (2.1), rooted, got the unlock code for my phone. But since I didn't have another network sim card at the time, I tried the "re-lock" method to unlock. Seemed to work at the time. (Didn't know that this method just adds another "accepted" sim card to the internal list.)
Just got another carrier's sim card, and when I put it in and booted, it did not ask for the unlock code. Voice calls work, but the "Network Lock" is still "ON". I've tried "re-locking" to several other MCC/MNC codes, but I never get the unlock prompt.
Does anyone know how I can force my phone to ask for the unlock code?
Or, how do I turn the "Network Lock" off?
Click to expand...
Click to collapse
Use http://www.communityhosting.net/sgsunlock/
You don't need to use a different sim.. The Network Lock becomes OFF for any carrier.. After unlocking, check by *#7465625#.
Hope this helps.
Worked, thanks!
Worked like a charm.
One question though: If I load a new ROM on, will I need to do this again?
Or can I just re-copy the nv_data.bin file (if necessary)?
software_samurai said:
Worked like a charm.
One question though: If I load a new ROM on, will I need to do this again?
Or can I just re-copy the nv_data.bin file (if necessary)?
Click to expand...
Click to collapse
Once it is unlocked, u'll never need to unlock again! even after different ROMs
Hey guys!
I got the M8 HK edition with 4.4.4 onboard. I found the guide on Russian forum which resembles guides posted here - flash to 4.4.2 deoxid (I used InsertCoin 3.0.4), then run SIM unlock helper ect.
Looks like the unlock did work because when I inserted SIM card, the "SIM info" popped up. But still I'm unable to switch to WCDMA mode or GSM/UMTS and no connection to carrier network . If I do that from settings>mobile data the phone says "no SIM found . Switching to CDMA". If from other menu (dial *#*#4636#*#*), also no luck, and it says "radio turned off" (something like that).
As you've already guessed, the situation is weird - I can see SIM services, and at the same time get "no SIM found. Switching to cdma" message and can't make the phone hook up to carrier network.
Bootloader unlocked /rooted
S-ON
HBOOT-3.19.0.0000
RADIO-1.08.20.0916
TWRP 2.8.5.0
Please let me know how to solve the above problem. Or any suggestions - flash older kitkat or switch to lollipop ect.
If you need more info, I'll provide it.
Thanks in advance!
Hello,
Please re-post your question in one(1) of the 20+ simunlocking threads in the General section.
Thread closed.
Thanks,
Sloth
Hi everyone. Could someone please give me the dial prompt or another method to enter an unlock code? I bought an unlock code but can't find a way to enter it. I've also tried mayrer's method (here: http://forum.xda-developers.com/spr...sim-unlock-t3229801/post63465284#post63465284) to sim unlock without codes but it didn't work, unfortunately.
When I put an unrecognized sim into the phone, it tells me it's an "invalid sim" but it doesn't go to another screen to enter any codes as I've seen in some videos.
Any help would be appreciated!
Edit: I have the the ls991 zv5 5.1. Flashed to stock and rooted. Trying to get it to work on Orange network in Spain.