I would like to install TF3D on a Trinity. Is it possible?
Thanks
Hi!
I've tried hard to install a TF3D clone on my Trinity and finally managed to:
Throttle Launcher 0.96 + TouchFlo 3D
but I'm not quite satisfied with the results:
Pda runs soooo slowly and behaves strangely. I enjoyed a number of bugs, crashes, unexpected soft resets and then removed the app...
Maybe a future version would fix it.
For official TF3D by HTC, I've simply never found a qvga version to test. Do you have one?
Yes I have tried that too with the same results.
I ended up removing it.
I wonder if TF3D is part of the ROM.
Related
hi there, i am new on this forum and was wondering what i need to do to get cube or touchflo on my pocket pc phone (htc wizzard wm5) without having to change the language if possible is there some1 who would be so kind to guide me?
thank you
CUBE
try out touch-commander
if you're a bit more daring you can check out dferreira's rom.
rev 4 still includes the cube and works flawlessly.
Or you can try TNT.1437 TouchFlo. Don't waste your time with any of those newer, less stable builds. I have been using the 1437 build for some time now and have never had a problem with it.
The only problems I have had with the TNT.1437 TouchFlo rom is a noticeable performance lag when installing large amounts of 3rd party add ons but this is normal for ALL roms.
I thought I downloaded and installed Diamond TF3D Config program. It's the one that you can change the tabs on the home page, add and delete tabs, right?
Well, it seems it was slowing down my setup so I tried to delete it several ways and each time it's still there.
So tonight, I came home and did a hard reset. Settings - clear programs - 1234
That does a hard reset, right?
Well, it redoes everything and guess what, the Diamond TF3D Config
program is STILL there....
Am I missing something?
FWIW, I'm using Dutty's 1.4 version ROM
Thanks,
Mark
That is indeed a hard reset. It might be a part of the customizations and to get rid of that, do a soft reset right before the customizations initialize.
Try going to settings/today/items/unclick Touch flo 3D
If you haven't tried it....
Will
I used Dutty's 2.2 ROM and the programme comes pre-installed as part of Dutty's ROM it seems. Using the advice above about soft-resetting before it installs the customisations should work (?) but then you won't have any of the other awesome apps Dutty pre-loads.
Also, I can;t say i have noticed the TF3D config affecting speed (when tried on my stock ROM) especially when the Advanced Configuration tweaks are applied.
Just my thoughts
Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Help! My on screen (full QWERTY) Touchkeyboard has disappeared!
I have to use the very small standard (poor) windows keyboard (only useable with stylus) or the - for this reason- installed Spb keyboard (is very useable but not the same).
After installing Gyrator, Diamond Tweak 0.5.3 Dutch and AtomAng & Danny and TF3dD2 Tweak the TouchFlo3D keyboard seems to be stuck in a sort of phonekeypad-modus and it won't get out. Soft reset, uninstalling gyrator and tweaks etc. nothing helps. Does someone own the TouchFlo Keyboard cab-file (if it exists) or have a solution? Please help!
Thanx.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Come on... you can use the microsoft keyboared with your thumbs. I used to for a while on a smaller screen than the D2.
But anyway I have no real help just thought I'd throw that in because it was one of my selling points when selling my Elfin. Look how accurate this screen is. I can type faily accurate and quick on this tiny keyboard..... try that on an iphone. Oh and I have these 3 other keyboards you can use to....
Great stuff.
Touchkeyboard solution
shuflie said:
You've enabled T9 input with one of your tweaks, probably diamond tweak, go back in and disable it again.
Click to expand...
Click to collapse
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
frankkk said:
Thanxx Shuflie, that was the solution: even a better one then what I hoped for.
It works fine again now (after a soft reset).
Really strange bug in the tweak prog however... How did you figure this out Shuflie?
Again thanx for your help.
_______________________
HTC Touch Diamond2 T5353
TouchFLO 3D 2.0.37889.1
ROM 1.39.404.1 (47382) NLD
Click to expand...
Click to collapse
I did the same thing when I had my Touch HD and it took me ages to figure out what the cause was.
why the hell did they remove the compact qwerty? I like the new full-qwerty, but I always found the compact version much better in this form factor for 1-handed use.
I started up this thread for any Kaiser user who uses, develops or does anything with Touch flo 3d Qvga (I Know there are other threads about these programs, this is to bring it into one place).
Posts on Applications, themes or anything for tf3d-qvga-3 and Touchflo 2d v 2.0 build 1919 is welcome!
Here is the kaiser D3D Driver.
If any Concerns Contact me at: [email protected]
I found a Standby App that shuts down TF3D when you power down:
Youtube App Also:
I thought Touch flo 3d doesn't work on Kaiser? Did someone get it working?
Dukenukemx said:
I thought Touch flo 3d doesn't work on Kaiser? Did someone get it working?
Click to expand...
Click to collapse
It works, it just doesn't work very well. TF3D needs the HTC-Class Action drivers, which are incompatible with all ROMS running the 101MB RAM hack. In addition, even if it does work on your ROM, a bug with the drivers prevents the device from entering standby while TF3D was enabled. A mortscript was made to disable it when the device was suspended or going to suspend, but it still took awhile and sometimes didn't work at all. Then, it would resume TF3D after waking the device, which also took awhile and intermittently worked.
There was a thread awhile back here, which put all the information in one place, so check it out if you're interested. But the way I see it, until fully working ATI Imageon/MSM7200 drivers are released for our devices, TF3D is unusable. If you want something that works well though, try the newest Manila 2d from the HTC Mega, which has the flipping clock and some of the looks of TF3D without the problems, and with this installed, it looks pretty similar.
Last nite i managed to experiment and install TF3D! on my htc tytn II, i used Unholy's Gaming Rom which doesnt have 101 ram and has D3D Drivers built in, i have to say for stuff thats experimental it does work quite well, its responsive and looks fantastic, it does take a bit to initialise once u come out of standby/sleep, but other than that i had a total ram usage of 50% used, 50% free which wasnt too bad, i think a fully working TF3D for our Kaisers is not too far away, as long as development continues, big up to da guys who have made this possible!
The problem seems to be that the drivers are in terrible shape. Doesn't work with roms using 101MB ram hack, and it won't allow the phone to go into standby.
How different is the MSM7200 vs MSM7201A? If devices using the MSM7201A chipset can run Touch Flo 3D just fine, then why can't we just take the drivers from those devices?
If someone has some experience with hacking drivers, I bet you can get those drivers working. I bet someone from Beyond3D could do it.
Some Screenshots Of Manila 2D:
hi bj... thx for the threads...it work just nice on my kaiser...but still have problems with bat power n backlight....seems it auto manage them when bat almost out...
nommy76 said:
hi bj... thx for the threads...it work just nice on my kaiser...but still have problems with bat power n backlight....seems it auto manage them when bat almost out...
Click to expand...
Click to collapse
Is This the standby program? if it is, the program doesnt like the backlight settings in. try turning them off. another way around this is to program one of the hardware keys to <none> then when the backlight turns off, push the button. it should turn the backlight back on.
it took me ages to find how to fix this problem. its painful but its worth it
Hope this Helps
Makes sense
here is a video of the new sense ui for htc touch 2.
http://www.youtube.com/watch?v=cDhnhrdYP0I
Background to all pages
Background for all tabs
I havent tested this yet...but here is the download
BG all pages
thx but after installed it, it doesn't work its ok i'll satisfied with my TF3D v3 now...the stand_by also work very well so now my bat last longer...hope i could post all the cab files n some images of my Kaiser...
TF3D on htc tyTn 11 Kaiser+S2U2+S2P
i take no credit just wanna share...
more images...
a few more images...
and the files...
still i'll take no credit for all these...really wanna share it...
take note these cabs/files are use on my kaiser and i don't know if it runs on others...used at your own risk...pls read the instructions first...cheers..
the files...
1. TF3D-QVGA_v3
2. NFSFAN Opera 9.5
3. htc audio manager by Swtos
4. htc Diamond album
5. TouchResponce v02_2
6. htc CA_Kaiser_Drivers
7. TouchPower & tf3dStandBy
8. M3D Lanscape
9. YoutubeQVGA
10. MortScript
11. Uzeb QVGA tf3d font patch (makes ur font a bit clearer)
12. No Curtains and Transparent bottom bar
13. Pamas Transparent Slider
14. MobileMatt CrystalClockWhite
15. S2U2-2.04QVGA
16. S2P-0.73betaQVGA
17. S2V-0.42QVGA (actually not working on my Kaiser, my bad to include this)
18. tPRO for S2P QVGA (theme that goes with TF3D)
Download the zip files at RapidShare from here..
and attached is standby in mortscript. (just extract all the files to your storage card)
...added fire charging phase; extract batteryg.png copy/paste and overwrites the png files to s2us folder in device/programfiles/S2U2
Screenshots!
Mate! love the screenshots it looks great! thanks for the links some there i didnt have.
re
doesn't work on my device..
One thing i know about Manilla... be it 2D or 3D... is that it's never the same instaling it, or having it cooked in a rom.
You'll never have the same stabillity... functionality even.
We could, of course, have a cook try and give us one very simple 6.1 rom with manilla3D cooked in.... it would be nice... just as a proof of concept.
Laurentius26...think that was is nick, once attempted it...
Now... that developments which i'm NOT aware now, like KaiserGL, VG and such...
stability...
i guess its how you choose the right files to flash and how you flash it because i did noticed different owner with same device, manilas and ROM but getting different results...
Hi.
Which Rom are using??
i'm using stock ROM 3.29
I have try the following ROMs and have some problems. Just wonder if anyone has the same problem
Duttys HD WM6.5 Leo Holy Grail R0
--PHM Registry Editor is not working??? It can be scroll up and down but cannot go in any root???
Duttys HD WM6.5 HD Sense 2.1 Holy Grail R0
--Whenever I turn on the phone and message pop up it say zz.exe cannot be open???Anyone know what is the zz.exe program>>>
I have tried both of these roms. With the reg editor it is strange and has the same problem if you install Hd tweak you have to sort of hold the stylus down long enough to register but not long enough for it to pop up the option bubble. There is a reg setting that you can change that eliminates this and changes the touch imput back to normal.
As for the zz message i didnt get this problem and i was using holy grail for about a month and only just installed Energy rom 2.1 win 6.5.1 rom works well and i find 6.5.1 is actually bit more user friendly
How about asking that at Dutty rom topic?
In Registry:
[HKEY_LOCAL_MACHINE\SYSTEM\GWE\Touch\Filter]
"MinimumTapTime"=dword:00000000
This is a much comented issue, a little bit of searching, easy to find!
PS: softreset is recomended after registry edit.
Hello
About your second problem, I got the same and told it in dutty's forum about ROM (but without answer).
After two or three days of use, the phone crashes and sometimes auto-hard resets!
thanks all for the help, But I found that both of the rom I mention aren't stable. And I flash with the Dutty's_HD_WM6.5_5_Leo_R7 and all work fine.
Fix мinimal тap тime set it to 0
There is a Fix
The second problem doesn't appear on most peoples phones so maybe a reflash or hard reset could fix it.
As far as stability, i havn't had absolutely any. For me this rom works really really well, has never hanged on me and is the only rom i've ever used continuously for a while so maybe one problem is related to the other?