Upgrading Radio ROM - XPERIA X1 ROM Development

i just flashed the 1.10.25.18 radio rom from the
THE XPERIA X1 LIBRARY: All available ROMS, RADIOS, TOOLS, FLASHING TUTORIALS, apps
Click to expand...
Click to collapse
thread, using the RADIO Update Utility.
Flashing went on until 99%, then it resulted in an error 262. After i took out and reinserted the battery the phone started up normally. Windows shows that the new radio rom has been installed.
does every radio flash result in an error, although it succeeds?

Im having the same experience... i hope its normal..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Had the same problem. Worked fine the 2nd time I flashed again.

I've used the flash from SD card method for both the radio and the ROM. Far easier and more stable than trying to do it over USB.

Anyway it is already tested and works
Just re-flash and omit the error if you get to 99%, check your device's on-screen "radio version" to check
The error seems related to the "security lock" (notice: NOT = "sim" or "operator lock")
Congrats on your successful flash, please report your "xperiances" with the new radio ROM

mastermarv said:
i just flashed the 1.10.25.18 radio rom from the
thread, using the RADIO Update Utility.
Flashing went on until 99%, then it resulted in an error 262. After i took out and reinserted the battery the phone started up normally. Windows shows that the new radio rom has been installed.
does every radio flash result in an error, although it succeeds?
Click to expand...
Click to collapse
do you see any noticeable difference between this radio and one that you had before?

With the default x1i radio, i sometimes notice that when using wifi holding the x1 in one hand and the stylus in the other, the radio will disconnect and start searching for signal, will updating radio solve this issue?

kulla said:
do you see any noticeable difference between this radio and one that you had before?
Click to expand...
Click to collapse
We haven't quite moved in to our new house yet, but during one of the walk throughs I noticed that I barely get any signal there. Well, I flashed a newer radio on and went back out there last night. I easily picked up another bar. Its not like I went from no signal to full bars, but it was a little better.

I have Radio 1.10.25.18
Also, the bluetooth stays on all the time It does not turn itself off randomly.
Wifi seems to work ok. Signal wise, i didn't encountered any "hiccups" until now. The battery life seems to be increased by 30-40%.

gregnm369 said:
We haven't quite moved in to our new house yet, but during one of the walk throughs I noticed that I barely get any signal there. Well, I flashed a newer radio on and went back out there last night. I easily picked up another bar. Its not like I went from no signal to full bars, but it was a little better.
Click to expand...
Click to collapse
so it's worth upgrading, one bar is better then no bars at all

Hello,
trying/tried to upgrade my 1.10.25.18 Radio (from R2A UK generic) to the BLACKSTONE_Radio_1.10.25.25 Radio found here.
Doing it from PC, and the ROM update utility 3.22.4.3 comes up with this:
Verify that you want to update the ROM version:
From:
Image Version : 1.03.931.8
To:
Image Version : 1.00.Raphael
Is this right? seems like I'm downgrading (or is that the details of the full rom but since I'm only picking the Radio I should be fine?
Cheers
V.

virtuvas said:
Hello,
trying/tried to upgrade my 1.10.25.18 Radio (from R2A UK generic) to the BLACKSTONE_Radio_1.10.25.25 Radio found here.
Doing it from PC, and the ROM update utility 3.22.4.3 comes up with this:
Verify that you want to update the ROM version:
From:
Image Version : 1.03.931.8
To:
Image Version : 1.00.Raphael
Is this right? seems like I'm downgrading (or is that the details of the full rom but since I'm only picking the Radio I should be fine?
Cheers
V.
Click to expand...
Click to collapse
Have you bothered reading the radio thread? and I don't mean this one...

I've read quite a lot and I'm trying to catch up (coming from 7years on symbian oses) have managed to hard spl and upgrade my phone. Haven't seen any radio rom particular thread.
Could you please point me in the right direction?
V.

LINK TO THE RADIO'S THREAD
It took me a couple of secs with "search forum"

Related

New SX66 firmware on Siemens website

Found this out on howardforums.com
http://www.howardforums.com/showthread.php?s=&threadid=568666
http://communications.siemens.com/c...1774_rArNrNrNrN_prodId:76051,00.html#Firmware
Firmware is v1.33.110
Anyone know what the deal is, fixes etc.?
Also, will installing this wipe everything?
Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue
MDAIIIUser said:
Further info
http://forum.xda-developers.com/viewtopic.php?p=91334#91334
Rom has password issue
Click to expand...
Click to collapse
Ok, I read that thread and didn't find any useful information. The conclusions it leads to are
-no one has successfully installed this rom
-the new rom does things which we don't know about
What do you mean when you say that "the Rom has [a] password issue"?
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
I hope you didn't hear that on the HOFO thread, because that was me speculating, and I have no evidence for it - just a hunch.
However, I would also like someone to verify. :wink:
Dster
If you own a sx66 then this upgrade is for you and should be a better one than your last.
Others out here see the 1.35, get excited and hope to install this upgrade on a non siemnes devices. When they try this they come upon the "Password issue" which in short says that you cant use that upgrade with the tools that are found on this site.
Check wiki for a better understanding.
No Simlock
AdmiralAK said:
I've read that the ROM upgrade might SIM lock your SX66 - can anyone verify?
Click to expand...
Click to collapse
Installed the new rom. I can verify there is no sim lock on it.
does anyone know how i could perform this upgrade while using the highest avalible radio version? 1.06.02
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
I cant wait
New to this
MDAIIIUser said:
[email protected]
Can you please upload the extneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
ProphetX
wiki, getting started
Click to expand...
Click to collapse
Sorry I am new to this.... how would I upload just the extended rom?
You'll first need to unlock your Extended ROM.
Download this file and run it on your SX66:
http://www.beyondthetech.com/downloads/phone/modding/BA_ExtROMTools.cab
Then go Start > Programs > ExtROM Tools > Unhide.
Reboot your SX66, then you'll see a folder called Extended_ROM. Copy that out to your desktop, then up to the FTP site at
ftp://xda:[email protected]
Just in case you didn't know, this folder contains the first programs and settings that it runs upon a hard reset.
Please let me know when you're able to do this. Perhaps somewhere in there is the key to resolve my annoying "05"-text-message-for-voicemail notifications issue.
Thanks!
Updating one of our SX66's as I type this.
We'll soon see what happens...
I did notice that the radio stack isn't as updated as some of the other stacks out there. I'll test it for a while, and if necessary, 'upgrade' back to the higher version.
uploaded.
Just updated the ROM and the RadioROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How are DUN and SIM lock?
Any noticeable improvement? worth the update?
BT Versions
What version is the BT stack in this update?
Any improvments with BT out of memory errors?
I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!
mamaich said:
I've downloaded this update. It has the same bluetooth version as 1.31WWE, no WMP10, but several DLLs like btagsvc.dll are newer. Radio is 1.02, which is obsolete.
Format of NBF files is changed, I've explained it in "hacking" section.
Extended ROM contains old apps, the only useful thing is WLANPatch.CAB. I don't know what RestartRadio.exe and AddContacts.exe programs do, maybe they also worth installing.
I've uploaded this update converted to the old NBF format to ftp://xda:[email protected]/BlueAngel/1.33.10WWE-from_SX66/
I have not tested it, so use at your own risk!
Click to expand...
Click to collapse
Restart Radio turns the radio on and off and addcontacts add's cingular's customer service and some other contacts, so I would definately say they are not needed.
AdmiralAK said:
How are DUN and SIM lock?
Any noticeable improvement? worth the update?
Click to expand...
Click to collapse
No SIM lock, using my AWE SIM;
Not sure how to check DUN;
NOTICEABLE better performance with BT headsets, Mot 810, 820 and Jabra 250, MUCH better, clear sound, cracking and static is GONE;
Worth the update? Hell ya.

WHAT? I got a snow screen...

GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
What do you mean snow screen? White static/noise?
P1Tater said:
What do you mean snow screen? White static/noise?
Click to expand...
Click to collapse
Like a old tv..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Something like this but not moving
have u tried a hard reset or even a soft reset?
P1Tater said:
have u tried a hard reset or even a soft reset?
Click to expand...
Click to collapse
Yeah I did..But I think it has to do with the unlock programm that released yesterday..because Id never had this before. And the last thing I did was flashing the unlock tool!
If you are referring to SuperCID unlocker by jocky, then I doubt it. I tested it out on mine and I am having no problems.
I've had the exact same problem. I reflashed with a new ROM and it was fine again. I believe some of the radio roms are a lot less stable than others. I've had no issued until I started messing with radio roms.
radio
hello bram i also used the sim unlocker
no prob only in step3 reflash the radio i had 1.27.12.29 orange
because it was not there for download i used 1.27.12.17 but whit this radio and the orange rom i hade a great batery lost [drain]
now i used radio 1.27.12.32 and al works grait again sorry for my englisch
which sim unlocker program do u speak of?
Jakeypoo
http://forum.xda-developers.com/showthread.php?t=361039
Bram87 said:
GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
Click to expand...
Click to collapse
just got that installing dutty's new rom.
i just needed to flash radio .11.
i had radio .9
What Rom are you using and what Radio are you attempting to use with it. The only time that I've seen this is when I flashed a rom that used an older radio when I had one of the newer 6.1 radio's installed. I flashed to the older radio and it solved the problem.
Using CID unlocker by olipro snowy multicolored screen help!!
My phone was already sim unlocked but i wanted to cid unlock it, so I was following instructions for olipro's unlocker. After step 2 had loaded and then restarted my phone the program on the pc said finish at the bottom, so I clicked it. Immediately the phone went to this snowy multicolored dotted screen and vibrated constantly. Not knowing what to do I waited 5 min but it was still going. So I unplugged from the usb and pulled out the battery. I am totally new at this but think I followed all the steps correctly in the "Flashing your first rom (for noobs)" section. I restarted my phone and the radio says it has olipro's radio but once past the att start up screen it goes right backc to the snowy screen although no buzzing anymore.
I had a phone do the exact same thing, also during the unlocking process... After I jsut reflashed a diffrent rom, it all worked... Hope this helps
Bram87 said:
GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
Click to expand...
Click to collapse

[ROM] WM6.0 1.30+radio 1.27+ sound rec+phone

Hello guys,
First, don't forget I wouldn't be able to do it without cmonex-olipro work on the phone rom and radio. All radio work is from cmonex.
Disclaimers:
This rom can phone, receive calls, has gps, sound and sound recording.
Snapvue is completly removed, might be added later. Cab install and internet explorer, notes, media player must be added as if it was just liberated. Will provide a more complete rom later.
All tools are in windows folder.
To call, you must activate speaker after calling.
Headset doesn't work for microphone. You'll have to go public for now
HARDSPL must be applied
First you must flash the radio.rar, wait for reset
then the rom.rar
This is GSM,EDGE,HSDPA only, not for CDMA
Radio mirror:
http://www.megaupload.com/?d=DMWZBMQ6
MD5: 89bb5e907f0ff7a25d4ed7731f942b81
EDIT: V2 Here :http://www.mediafire.com/?sharekey=68d6260a8babd12175a4fc82078ae6c8e04e75f6e8ebb871
MD5: 2fae3b018b47ef138f0d1d58d26db53b
Cab install working, volume setting can be changed, pocket ie, notes, other programs added, tools are in program folder, under htc debug tools
****
For beginers: first install HardSPL (read forum for the proper link) then the radio, then the rom.
To install radio or rom, use the main prog, and run as administrator
For radio, it is "romupdateutility.exe"
for rom, it's customruu.exe
ALSO, YOU ARE FLASHING A RADIO, THERE IS NO OTHER RADIO POSTED ATM, AND I HAVE ONE OF THE ORIGINAL ONE. OTHER THAN THAT THERE IS NO OTHER RADIO AVAILABLE. IF A BUG APPEAR AFTERWARD BECAUSE OF IT, YOU ARE STUCK WITH IT.
Edit: Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/202118088/RUU_Signedshift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=717c36024ffb7fe0d9d5c56d04dfa8b01186a30b2701a3f65be6ba49b5870170
****
Downloading the rom now, but mediafire keeps giving me a network timeout when I try to download the radio.
I'll keep trying... and I'll post rapidshare links when I can.
Edit - still can't grab the radio, either network timeouts or 'The document contains no data' errors.
Can you re-up it?
Sadly I cant download the radio part either, the ROM works just fine though.
Posting mirror: http://rapidshare.com/files/201988911/Radio.rar.html
Please add your mirrors, this one will die in 10 download.
Mirrors:
Rom - version 2 - http://www.filesavr.com/romv2
Radio - http://www.filesavr.com/radio
is it working for you?
Installing now... had to backup some stuff from the winmo side.
Will report back soon.
Thank you thaihugo! It's working! I'm going to donate later tonight.
The calling works perfect, audio is perfect on both sides of the call. However the sound is a bit low and you cant adjust the volume (bug?)
Thanks!
I'm posting an update right now. You should get the volume soon.
Yes, it works. Kudos to you sir.
Volume would be useful, I'll wait for the update before setting up too much.
Thanks, thaihugo.
I'm getting a loud hiss from the speakers, when XP or Vista are running.
It goes away when rebooted, but comes back after a few mins - or it did once, it seems to have gone for now.
...10 minutes later, it seems to have cleared up. Hopefully just a hiccup.
edit again - this has not happened since..
updated rom
BOJAKA!!!!!
U are da man.....
Thnx 2 all of ya who helpd make this posible!
great news, didnt think this day would come. you are much appreciatd.
instructions for radio flashing
My Shift is hardSPLed and I've tried out several ROMs, so the ROM bit looks familiar, but I'm not sure what to do to flash the radio. There are a load of files in the radio RAR, and I'm not sure which one or ones I have to run.
Sorry if this is a stupid question - I couldn't find anything on search.
Matthew Karas
First...Fantastic job, my friend!!!
Second - Do we have to or can we use the wired headset for the phone? (Bluetooth would be alot to hope for....LOL)
Third - I am guessing that Mobile device center needs to be running to flash this, right?
Again, great job........... Later
P.S. To all of you naysayers (you know who you were.... ...... I said that someone would have a working rom soon...........
Later
Thanks for this great work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kind Regards
please guys I am so thankful for this news. I am completely new to hardspl and flashing roms.
Can someone tell us in detail for a newbie like me how to the steps from A-Z. My shift as far as I know is liberated.
Please guys help me make my shift work as a phone, please provide a step by step guide for shifts that have no hardspl.
pleasssseeeeeee
thaihugo you are a hero, congratulations and thank you for your work
thaihugo said:
updated rom
Click to expand...
Click to collapse
/
thaihugo you are the best.... thanks. please, tell can you post cab for snapview. can you.

Problems with new Rom PLEASE HELP

hi i hope someone can help.
i have been reading the threads based around the new 1.56 rom,and am too having a few problems.
I was i was currently running duttys 2.6 rom using HSPL.
So i flashed the New released rom from HTC thinking everything would be ok, but all the colours were mixed up and was running alil slow, so after reading a few other posts, i tried to revert back to stock spl, i put 1.13 stock rom back on and used USPL as others have found this works.
My colours are still mucked up and everything is running slow still. I thought maybe i should have put stock 1.15 spl on but everytime i try that, the progress bar hangs at 0% and nothin happens. I want to start again fresh and removing everything and getting eveything back to normal.
i hope someone can help me out
The wiki contains a nice article summing all facts up.
A 1.56 rom doesn't work with any SPL below 1.54. Just look up your SPL version. I guess you haven't 1.54 at all.
johnpatcher said:
The wiki contains a nice article summing all facts up.
A 1.56 rom doesn't work with any SPL below 1.54. Just look up your SPL version. I guess you haven't 1.54 at all.
Click to expand...
Click to collapse
i have 1.54 installed, would it be worth going back to HSPL install Olinex again?
Still hanging at 0% why would the RUU do that?
Hey Benny,
had the same problem as you. Could recover my device by flashing the original (or as close as I could find) ROM.
Check for ROMs here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
And here is a thread describing the procedure:
http://forum.xda-developers.com/showthread.php?t=502167
ok so now an update..
ive managed to restore back to stock using the orange rom dump in the wiki.
and stock SPL 1.14
heres what the red writing says as i turn it on..
R 1.09.25.14
G 52.49a.25.26
D 1.14.22273
Ive then read through the tutorials and it says to flash a stock 1.56 rom now, ive tried doing this with both..
RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship
RUU_BlackStone_HTC_Europe_1.56.401.1_Radio_52.62.25.34_1.13.25.24_Ship
but both flash up ERROR 294 "Invalid Vendor ID" im currently on orange.
Looks like this???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xenonone said:
Click to expand...
Click to collapse
yeah the home screen looks like that.
You have to install uspl 2.5 in order to install any other rom than stock rom
Bennyboy1985 said:
ok so now an update..
ive managed to restore back to stock using the orange rom dump in the wiki.
and stock SPL 1.14
heres what the red writing says as i turn it on..
R 1.09.25.14
G 52.49a.25.26
D 1.14.22273
Ive then read through the tutorials and it says to flash a stock 1.56 rom now, ive tried doing this with both..
RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship
RUU_BlackStone_HTC_Europe_1.56.401.1_Radio_52.62.25.34_1.13.25.24_Ship
but both flash up ERROR 294 "Invalid Vendor ID" im currently on orange.
Click to expand...
Click to collapse
ive just installed uspl with duttys latest uspl release but all the colours are fooked, im guessing that because my radio isnt the latest release.?
Bennyboy1985 said:
ive just installed uspl with duttys latest uspl release but all the colours are fooked, im guessing that because my radio isnt the latest release.?
Click to expand...
Click to collapse
I would think you have a 1.54 SPL down grade your SPL

Radio Update 7.13.35.05 (from Vodafone FR/UK)

Radio Version: 7.13.35.05
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This radio update is contained in the following OTA updates:
* OTA_Legend_Froyo_S_Vodafone_FR_3.14.163.1-2.05.163.1_R_release_135178_156976z7st0ojsytxcijbe
* OTA_Legend_Froyo_S_Vodafone_UK_3.14.161.1-2.05.161.1_R_release_135177_156984u2k321537x1cpy3d
Download: Radio_47.39.35.09_7.13.35.05.zip
Enjoy!
Was hoping someone would provide this. Thanks a lot
thx, could you explain how you did it? I was planning on doing it myself but couldn't find any info on how to do it.
JonasDroid said:
thx, could you explain how you did it? I was planning on doing it myself but couldn't find any info on how to do it.
Click to expand...
Click to collapse
Was explained 10 and more times... extract radio.img from OTA, make update-script, zip, sign (or not), flash via recovery.
Sent from my HTC Legend using Tapatalk
BlaY0 said:
Was explained 10 and more times... extract radio.img from OTA, make update-script, zip, sign (or not), flash via recovery.
Sent from my HTC Legend using Tapatalk
Click to expand...
Click to collapse
Ok thx I've been googleing it this morning and couldn't find it.
pfak said:
Radio Version: 7.13.35.05
Click to expand...
Click to collapse
Thanks for this, Can you or others who have flashed this report on your experience so far. Any bad issues? (bluetooth/wifi) and how is the 3G signal.
maxonite said:
Thanks for this, Can you or others who have flashed this report on your experience so far. Any bad issues? (bluetooth/wifi) and how is the 3G signal.
Click to expand...
Click to collapse
Wi-Fi and Bluetooth have nothing to do with radio firmware. They are on a separate chip...
Sent from my HTC Legend
I flashed this radio about 2h ago and everything seems good so far, no change at home from 7.08 radio, let's see what happens tomorrow at work (there I have bad signal reception)
I flashed this Radio only. I don't know how it is possible but Gesture Search no longer activates with Double Flip Motion. I can't think of anything I've done otherwise that may cause this interference. Also ran a callibiration and reinstalled Gesture Search.
Anyone else having trouble with Double Flip? Please let me know. Weird.
Sent from my HTC Legend using XDA App
Wondering ! Cool thx pfak,it worked ok for me.
I have to restart the APN every once and a while
and the APN fix is just for the new kernel,... I hope there will be an other radio included in the WWE rom
JonasDroid said:
...and the APN fix is just for the new kernel...
Click to expand...
Click to collapse
What on earth has APN config to do with kernel?
there should have been a question mark but it got lost in rewriting I guess.
I thought it had to do with the kernel since snakehult made a topic: APN update FroYo 2.2 - Kernel 2.6.32.17
To me that looked like APN update included in kernel 2.6.32
It has nothing to do with kernel.
deimdos said:
I flashed this radio about 2h ago and everything seems good so far, no change at home from 7.08 radio, let's see what happens tomorrow at work (there I have bad signal reception)
Click to expand...
Click to collapse
I didn't notice any improvement in signal reception, however WIFI seems to work better, I need to test it more
deimdos said:
I didn't notice any improvement in signal reception, however WIFI seems to work better, I need to test it more
Click to expand...
Click to collapse
Wi-Fi has nothing to do with radio firmware!
Sent from my HTC Legend
As usual it appears that this thread has been derailed by people having no idea what they are talking about, this is a RADIO update and ONLY affects the RADIO.
It does not affect: APN configuration, WiFi, Bluetooth, The colour of the sky
Please, please stop with the anecdotal responses and things like 'this works better' or 'this works worse' without actual benchmarks and proof (such as a 'control' phone) your postings are useless and just take up space.
Actually I don't know about Legend, but in others phones radio affects to almost every wireless stuff (like WIFI or GPS) because of the integration just in one chip.
On Legend Qualcomm MSM7227 (SOC) drives phone's radio and TI WL1273 drives Wi-Fi, BT and FM radio.
Sent from my HTC Legend
using it for a few hours, so far so good, no reboots, not connection drops etc, update later
stilll ok, with cyano 6.1 rc1

Categories

Resources