Hello good people,
I've been searching the forums but i don't seem to be able to find a solution for my dead kaiser.
I'll explain the problem:
When i push the power button on my Kaiser, it start's booting the first part, displaying the "smart mobility" slogan by HTC, after a few seconds, some data appears in red, in the right lower corner of the screen, this is what is says:
R 1.27.12.11
G 22.45.88.07H
D 1.56.00.00
After displaying this for a while (about 1 min.) it goes to the Windows Mobile Splash Screen.
After displaying this for a few seconds (5 to 10 secs) it makes the "empty battery" sound and shuts down.
Can someone help me ?
*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
ttenhag said:
..snip*** And NO, the battery is NOT empty ... i've charged it over night, and the power light was green. ***
I've tried booting with and without SIM and MicroSD cards ... makes no difference.
Click to expand...
Click to collapse
Will it boot with the phone plugged in to power?
Bill
Yeah, try booting with the charger on. Chances are that your battery' life is out..
Reagdrs,
Carty..
I have had the same thing and wondered if it was the battery... except that sometimes it will stay on for about 2 minutes, sometimes half an hour... but most of the time as soon as it goes to the Today screen, I get the battery dead sound and then it turns off. I am going to try to use another battery to see if that makes a difference.
it's not the battery
I've tried with the power cord on the phone, it does 2 things:
1. The same thing as i said before
2. Doesn't boot at all, it halts on the screen where the red data shows up and stays there until you take the power cord off and the battery out.
It does one of these things, randomly.
I've also tried with another battery from my friends kaiser which works perfectly.
So i guess it's not the battery, anyone another idea what it could be?
Might be something wrong with the firmware or anything? problem is, i can't flash it if it doesn't boot can i ??
any ideas ?
Today i managed to get my hands on a brand new kaiser battery, my uncle has a brand new kaiser and i borrowed his battery.
His battery was full, i put it in my kaiser and tried booting, same problem as above.
I've tried with the power cord plugged into the phone, the charging led went on, and i tried booting, same as above.
Later i've tried with the USB cable connected to the phone and the computer, still the same.
I've also tried soft&hard resetting with the new battery, no succes.
So therefore, i believe it's not a battery or a power problem, it must be firmware corrupted or something of the hardware broke ?
Does anyone has any idea how i can try to re-flash this thing ? to find out if that might be the problem ?
It's not the battery. Could be a bad flash or something. Try to reflash it. Yes, it will reflash even though it won't "boot" as you say. Try to reflash and then report back. Remove the memory card for now.
Also, what Rom and SPL are you using?
Ur going to have to force it into the bootloader to flash it, no biggie. Just hold down the power and camera buttons, and hold the soft reset button with the stylus, untill you get the tri color boot screen. Then flash away! I would flash a stock rom until u can tell weather your problem is hardware related or not. If hardware related keep the stock rom and spl, and try to warrenty return it.
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
kaalgoosy said:
O.k., this just happened to my Brand New kaiser last night too, WTF! Was running fine when the low battery icon came up with half battery life n shut down, now it wont start up at home screen for more than 3 secs before it shuts down and says the battery is dead even while its plugged in! There's no way to reflash or hard reset since it doesn't stay on long enough to do so. Just ordered my replacement, but reading different forums, it seems many people have experienced this with Kaiser and most around the same time, again, WTF!!!
Click to expand...
Click to collapse
Does it power off while beeing in bootloader? You doesnt have to start the device up to get into bootloader you know. Try checking if it shuts down while beeing in bootloader, if its not just reflash. Another thing, what spl and rom are you guys having this problem using?
It's alive!!!
Finally got it to bootloader mode before it dies and reflashed and it seems to be running just fine now. Using spl ver.1 with schaps 4.30 wm 6 (although users running the stock rom had the same experience). Got the "smart chip not provisioned mm 2" message most likely from at&t killing my sim card from a reorder as they did when I Returned the Iphone which is a rediculous policy(policing); having to constantly contact at&t to update to a new sim. Still, it makes me wonder what caused this defunct in the first place, and if it'll happen again tomorrow or the next day. Reflashing and reinstalling cabs is a Real *****, especially for a pda where people use their device for business and gather a collection of missed calls and lost connections when the Os decides to randomly crash. As much as I dig htc's devices, it's kinda strange how HTC, with such a huge marketshare with pda's, is so quiet about updates or firmware fixes. Anyways, long live the only source for htc fixes, XDA!!
Mine is still completely in the state in which i got it.
Just the stock HTC Firmware, rom's and loaders
Okay, a little update.
How the hell can i flash this thing if it keeps on bugging me with the "Wrong vender ID" message when i try to flash it ?
I know, install HardSPL ... but how can i ? without a possibility to connect ActiveSync?, you'll have to start the device for that and run activesync, but i can't because it won't even boot.
Is there any other way of getting this device to allow me to flash without needing to boot it up fully.
I have no problems getting in to the Tri-Color bootloader, but no further.
When updating it gets to 1%, then my PC gives the message: "Wrong vender ID, please use your own device's update utility" and the phone stays at 1% till i rip out the battery.
ok guys I have the same problem with two of my kaiser's
I can power them up but in aproximately 1 minut goes off, no matter if the charger is plugged or not, it doesn't make a difference
I can put the phone in tri-color screen and stays there with no problem
and I can flash them with no problem because they are olipro already
but after flash them with anything still the same problem ???
so if anybody has a clue or maybe a rom to fix this would be great
thanks
best regards
linterna
One more thing. I have the same problem but mine when starts flashes Blue LED when was good hasn't. I Started few times and it works for 2-3 weeks and again. Best to do is to not use camera. Every time it happends i ise my camera and battery was middle-low. I think its some problem with camera. Many times it don't want to start up or saids that there is no memory for saving photo. Maybe i should flash rom from wersion without cameras.
im having the same problem, has anyone solved this?
Yeah solve . HTC as a kids toy .
Buy Nokia! Or SonyEricsson.
I won't buy smartphone ever again.
Does not boot to the OS
I have the similar problem...... My kaiser is dead not even booting with battery only (not plugged to the PC or external charger).
However when I plugged it to the power source it boots up and continue to the OS and boom (shuts off) in split of second.
I tried different flash and it propelry boots and got windows up and running when plugged to the PC with the old ATT test ROM which I got from the xda threads.
But with the latest roms it wont boot to the windows , it dies before that.
Anyone having idea what could resolve this.
any update on this? i am having the same problem. i tried a hard reset already with no success it goes to the splash screen and says "the device is clearing the storage. please wait" then pings and turns off
r 1.65.21.18
g 25.88.40.05h
d 3.57.00.00
my phone is completely stock and has never been unlocked or messed with. found an updated at&t rom, i ran it and none of the numbers change in the bootup, then goes to the splash screen and says again "the device is clearinng the storage. please wait" and then pings and turns off.
also i have been searching for the oilpro or jockeyw hard spl files on google and on here but have found nothing, the search function doesnt seem to be able to find much.
any help would be appreciative, thanks in advance
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Zerxer said:
Don't mean to hijack but didn't want to make my own thread when this one was here. I'm not having exactly the same problem as everyone else but I am having a battery issue. It works fine and says it's charging when plugged in but when I unplug it the battery goes down fast (like 1-4 % a minute) and when it hits around 70%, it shuts off. Then whenever I turn it on, it immediately shuts down before the Today screen fully shows (like others are mentioning here). I have to plug it back into the charger to get it to turn on again.
Could this be a bad flash too..? I know I did one of the latest HardSPLs and tonight I just now updated to the latest stock AT&T ROM. But it can't be a flash because the night I got it (bought it used on eBay), I was playing with it not plugged in using Skype and it shut off on me. I didn't think much of it and had always had it plugged in since then.
I'm assuming I simply need a new battery.. I've emailed the original owner and she says she never had any problems with it like this.
Click to expand...
Click to collapse
I've just started having the same problem as you. Very annoying. Mine phone is a year and a half old now, so i'm assuming the battery is coming to an end.
Charge battery, will last a while, but goes down to around 80-70% and then it says plug power in blah blah blah and dies. Then when you charge it, it stays on one or 2 bars for a bit and then jumps to 100% fully charged.
Saw a procedure to "reset" the battery. Supposedly have to take the battery out for a bit then plug in and charge fully over night with the phone OFF. None of this seemed to work for me... I'm due for an upgrade in January, so is it really worth paying for a new battery... hmmm
Hi, I have been using my HTC diamond toch for nearly 2 1/2 months. a few days ago, i did a rom update using Dutty's rom update. All went fine duing the update. used the phone for about 5 days nonstop, no issues at all.
But yesterday all of a sudden the phone has swtiched off by itself, now it doesn't switch on. Thought the battery might be dead so i tried charging but the enter buttton area doesnt glow and there is no sign of charging.
I switched batteries with a friend to see whether it was faulty but it is in good condition.
What do u think the issue will be ?
Thanks
Buddhi.
I have the same problem. I've just got my phone back from being repaired as the touch screen got all messed up and now it won't charge. I plug it in and the touch pad does the charge animation twice then stops. It'll randomly try to turn on but it doesn't even get to the point where the red writing apears before it turns off again.
Help?!
same problem here
Dudes.... Chill!!!!
Here's what you can all try ....
First you guys need to know that de HTC does not charge if the rom is inconplete/damaged .
And.....
If your batery is realy dead there is no initial power on the internal battery to manage the chargement.
So ... resolution.
Fist way .
If you know any one that may have an other HTC Diamond you need to swamp batteries so the good Diamond that has the internal bat ok and charge it there.
Second way . this one i did it my self .
Go to a Local ChinaMan store and buy a multimeter and a regular Universal Adapter.
Heres how it hoes ...
Use the Multimeter do figure out the polarity pin's on the battery ex: + and - .
remove / cut one of the plug's from the Universal transformer and also tag the polarity.
set the voltage to be close to 5 V - 1 Amp .
Can be 4,5v or 5.5v no sweat
Conect the cuted wire from the Univ. Adapter to the Diamond Battery respecting the polarity.
Leave it for a wile..... ( Probably up to 1 hour but chec from time to time tme battery temperature and if possible a reading on the bat voltage levels.)
Done!
Put the battery bat and boot your diamond or turn on to boot loader.
**** Attention if you don't have more than 50% of the bat charge compleated you wont be able to flash your phone****
Any questions Just reply back.
same problem...
its just...my battery was full before the upgrading...i was Unlocking my Diamond..and the upgrade didnt move more than 0% just when i looked on my mobile...there was black screnn...pluged it out..tried to power on..nothing..tried to charge...nothing again..i tried hard reset(vol down+power+back+reset)..it just wont turn on..please help me..im in panic
Help, I have the same problem and my battery was fully charged before this happened. Voltage reading is 4.2V on the battery.
I also tested the power button and there is nothing wrong with it, it conducts when pushed.
Usually pluging in the charger should start it up, but it will not start.
Anyone have any solutions?
I couldn't fix mine so phones 4 u replaced it with a touch hd
Mattmanico said:
I have the same problem. I've just got my phone back from being repaired as the touch screen got all messed up and now it won't charge. I plug it in and the touch pad does the charge animation twice then stops. It'll randomly try to turn on but it doesn't even get to the point where the red writing apears before it turns off again.
Help?!
Click to expand...
Click to collapse
I had the same exact problem two days ago.The phone was not charging while it was on,and when it was off it did that charging light animation twice and then third time the litght managed to get in the middle of the button and sudennly stopped. So here is my solution . I'v managed to charge the battery on another phone and turned my Diamond back on. While still attached to charger and power source i'v performed a soft reset (by pressing the reset button beneath the stilus) ...the phone reseted and now it's all ok.
bughiman99 said:
I had the same exact problem two days ago.The phone was not charging while it was on,and when it was off it did that charging light animation twice and then third time the litght managed to get in the middle of the button and sudennly stopped. So here is my solution . I'v managed to charge the battery on another phone and turned my Diamond back on. While still attached to charger and power source i'v performed a soft reset (by pressing the reset button beneath the stilus) ...the phone reseted and now it's all ok.
Click to expand...
Click to collapse
I had same problem , no solution yet.
When I had a Mpx220 I had fixed changing a fuse, but I can´t see nothing in internet guides or foruns.
If someone knows how to repair tell us, becouse htc service in our country isn´t good and my device is outdate warranty.
Regards,
Gus
Someone has fixed?
I have the same problem but on my samsung corby GT-i5500. I installed the clockworkmod on my mobile by rom manager and rebooted in recovery, I think i've installed a wrong version and now it does not turn on at all! what should I do? my parents will kill me if they discover that ive broke my phone
NEVER MIND. I BOUGHT A NEW ONE. (at least i'll have spares)
i we had my blueangel for about a year now and i while back it started shutting down randomly and didn't boot. so i got pissed and started using another phone instead. but now i want to fix it. so the problem is:
randomly flashing blue light and no bootup. somtimes the redlight flashes too.
sometimes the screen shows ROM but crashes. (no backlight)
and with my other battery i just get a glowing red light or simply nothing.
i overclocked it in the past, any chance the the OC killed it? highest was 570 something but only for a short period.
when it started crashing i figured the rom was corrupted or somthing and i wanted to upgrade it to wm5 or 6. but it died like 10 seconds before i plugged it in and it's havent worked since.
i've noticed something though. i charge it with my qtek 1010's charger 5v 1A however on the blueangel its 5v 2A. but i worked fine for about 6 months.
any thoughts? is it gone for good?
EDIT: i almost forgot. bootloder mode doesnt work either. when it finally starts all i see is the t-mobile logo an rom version.
EDIT2: a quick ansver would be great becouse there is an mint condition blueangel for sale and i'll probably buy it if i cant save my current one. however i would save a lot of money if i fixed this one.
You've probably flashed wrong or bad rom, so the device is doing god-knows-what when you turn it on Maybe there's a way to flash some working rom to it?
in never made it to the flashing. i plugged it in and it was dead. so i never had time to flash it, i died before i tried.
did you have the red light when you put your BA in charge ?
Because in my case, when i don't use my BA and my battery is empty, i need to charge at least 30mn my BA and after i remove the battery and soft reset the phone for restart my BA. This is the only way for restart my BA.
The charger 5v 1A is not a problem but if your BA crash during the upgrade of wm5 or 6 is not good.
in first try to start your phone and go in bootloader.
you should only flash your device, when the battery is full, because
1. the device is not being charged while upgrading, and so it could switch off during upgrade if the battery is not full.
2. there are rumours, that the battery state during the upgrade is recognized as 100% after upgrading and if that is not true, your battery state is all messed up and you could harm your battery while charging afterwards.
Help me, hi,
I have a ipaq 6510 that was not use for a while. I put it to recharge a whole night, but what I get is just a blinking startup screen (that one with the hp logo and the 1.10 somethign version ...)- it's coming on for 3-4 seconds, and going off again ... (with USB charger)
I've tried now just with the charger, without the battery, and it's showing me that the device has power, but I can't start it up.
I also tried soft/hard reset, n get a tissue paper under baterray n switch
can anyone help ?
add me on yahoo ID cata_cata_cs and i will help.
Hi guys..
I have had my Tilt now for about 2months and recently tried downloading a 200Meg file off the web with it. It drained the power even though the charger was plugged in and so I was clever enough to fool around with chargers...Bleh.. Anyway, so what had happened is that after me switching the phone off etc. I tried charging again without downloading and when I plug the charger in, NOTHING happens..the green light flashes like normal, no light changes and no blips or notifications come up or anything. If I switch the phone off and then plug the charger in, the red light appears and stays there (and I presume it charges). So now I can´t find a fix..Seen MANY other threads regarding similar problems but 90% result in getting a replacement from the supplier which is not possible for me since I don't work off contract and neither is the warranty still valid and neither do I live even NEAR a HTC dealer. I've tried soft resets, hard resets, restarting phone with charger and battery in, without battery in etcetc. The battery is fine.
So it seems my last resort would be opening up the phone and looking if by luck I can see or measure something. Any help at all will be greatly appreciated
Brian
I have same problem, My HTC only charge when power off, No active sync... but i could up rom because in bootloader 3.56 only show USB without serieal . Yesterday i uprom ship end restore SPL. Then my HTC Kaiser can't uprom. It only sirieal when conect USB.
I think it cause by software without hardware. So everyone help us...help me too
Yeah, mine doens't get recognised by my computer at all. Which means no backups or syncs somehow I think my friend's broken TYTN II is gonna come in handy...hmm....
And just for more info, I am as I'm speaking, charging my phone (with it being off) and the red light has been on around an hour long.. Gonna see if it goes off or changes.. Will report back once something happens
Brian
Edit: I just switched my phone on (after around 2 hours charging with it being shut down) even though the light was still red, battery is now 100%.. so.. I'm now downloading the next 200meg file and another 39 files to go
Update: Just something weird.. The tilt was charging(in its shut down mode) and then suddenly switched on by itself.............. uhm..yeah.. so once it came on, i looked and everything was still the same.. pulled out the charger, switched off, put charger back in(cause the battery was about 30%) and boom, green light and switches on again bleh.. so now I fiddled with the battery and charger, and got it to charge in its off state again with the red LED.
http://forum.xda-developers.com/showthread.php?t=372266&highlight=rlod
I thiink, it can "fix in booting safe mode". But I can set it to safe mode
You can try it, follow step in the link, then re tell to me!
every oen, who can help us?!
hey, I took a look there and I tried those things but it didn't work. Apparently there is no "Safe mode" for these phones unless you have a third-party software. So just to confirm, I took a look through the user manual and found nothing, Googled "HTC TyTN II Safe Mode" and found random stuff but not much related besides third-party Apps. So then I just tried randomly fooling around with my TyTN II by holding and pressing random sets of keys while pressing the soft reset button. No luck.
Brian
http://forum.xda-developers.com/showthread.php?t=354061
I find it, i think our KAISER have two problems: can't hardspl and RELoD. Nơ i try follow thí link, maybe SDA application unlock can fix them. But KAiSER can't active sync by USB connect. Now Ifind method activesync by bluetooth. and can find SDA application unlock by SD card. I think MR jockyw2001 have many expriences can help. can you help me?,mr jockyw2001 ?