Related
Only two buttons are available to be re-difined. Can't be register hack way to Re-defined OK button? Or add more buttons into selected key.
ukukuk said:
Only two buttons are available to be re-difined. Can't be register hack way to Re-defined OK button? Or add more buttons into selected key.
Click to expand...
Click to collapse
I think have three buttons
I am using AE Button Plus. UI is not that intuitive, and it's not free, but it allows OK button remapping (among others.) Here are my button functions:
Voice speed dial button: 1 press: Run App (Fullscreen Keyboard), 2 presses: Run App (Photo Contacts), 3 presses, Run App (AE Button Plus), Press and hold: Rotate Screen (Can rotate in any of four orientations)
Camera button: 1 press: M$ Voice Command, 2 presses: Camera, 3 presses: CorePlayer, Press and Hold: Xn ViewPocket (photo viewer)
OK button: 1 press: Close App, 2 Presses: Switch App, 3 presses: Soft Reset, Press and Hold: (doesn't seem to work)
Left soft key: 1 press: Left softkey (but mapped to WMP on today screen through Tweaks2K2), 2 presses: TomTom 6, 3 presses: Resco File Explorer, Press and Hold: StarCaddy (I'm a golfer)
Right Soft Key: Could remap all, but "Right Soft Key" command within AE ButtonPlus doesn't seem to work and I don't want to loose that button's soft key functionality. So I've left that one alone.
Start Menu Key: AE button plus cannot seem to add both the OK button and the Start Menu key at the same time - so this one is not touched either.
It also doesn't seem to play nice with CorePlayer: AE dominates and doesn't let other programs remap while they are open. I'm adjusting though.
Hope this helps. I've tried other mappers (VITO didn't work at all for me, and Double Launcher limited me to only 2 buttons) and this is the best I could find to date.
If anyone else has a different or better solution, please post it so we can all get maximum functionality from our little pets!!!
Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
aminhafez said:
Basically the program has to do the following:
1- I want the RED (front facing) "call end" button to work like the Treo 750. So pressing it while in the Today screen switches off the phone, pressing it again switches the phone on. Pressing it while in an application takes you to the today screen.
2- After doing that then we don't need the hidden phone on/off button so we can make it into a silent/mute button. So a long press on this button while the phone is either on or off will put the phone in silent mode, also very similar to the Treo's profile slider.
Anyone reading this is up to the challenge?
Anyone here has any other requests? Let's make a list and see who is up to the challenge.
Click to expand...
Click to collapse
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
tomasz said:
Not up to it, but why'd you want that. Switch phone/flight mode can be assigned to any hw button except call or call end, assign the same button(hold) for mute/unmute and there you are.
Call/end call buttons not being assignable is a hardware limitation, accordig to spb software house (pocket+).
Click to expand...
Click to collapse
Ok so how can I assign the mute/unmute to a hardware button as I can't find it in the settings--->buttons' drop down menu?
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
And if "hold" is a suitable alternative to mute, you don't have to do anything... pressing in the volume button toggles the call on/off hold. At least on my Tilt.
tomasz said:
I use spb pocket plus to assign buttons. It has the mute option standard in its list of button tasks. There might be freeware apps that let you do the same, but I don't know them (as I allready had a copy of spb pocketplus from my previous windows mobile device)
Edit: AE Button plus seems to be a freeware app that can do what you want...
http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
AE Button worked well. Now I can mute/unmute at a touch of a button. I haven't tried its full potential yet.
Thanks for the great tip.
Still though I wouldn't mind a power feature like the Treo. I do not like that itty bitty recessed power botton on the right...
On a side note I'm going to try and see if there is a reg key on the Treo I can copy to the Kaiser where when you are in PIE and hold the action button it pops up the IE menu. That's nice. Not sure why its only on the Treo. I guess for it's one handed nature... What, I don't get to use my Kaiser with a one handed nature in mind?...
juiceppc said:
you are in PIE and hold the action button it pops up the IE menu.
Click to expand...
Click to collapse
Hmmm, that might be a useful map for AE button... for the side "ok" button, map a double-click to the left softkey, and press/hold to the right one (and single-click stock OK). Between that and the scroll wheel, that should make for some pretty easy one handed operation.
Just tested it.. works well, though the side OK button is a bit stiff/recessed to easily double-click with a thumb. May take some getting used to.
Hey guys,
I think i have found what your looking for. I also needed to toggle my Flight mode by a button because since most ROM versions of WM5 and WM6 Flight mode can`t be switched by tapping the signal meter at the top of the screen.
I installed this app and linked it to Button 6/Recording (Press & Hold) and now it switches Flight Mode On and Off. This is what i needed.
Look here: http://toosten.de/index.php?seite=sw&id=7
Have fun with it
One thing for now i noticed. When activating Flight Mode, it just turns off the Phone Signal and not BT when enabled. I am contacting the author of teh tool to see if some options can be added.
Hi there,
For some reason the camera button on my kaiser stopped working. whenever I press it I get the message attached. If I start the camera from the programs interface and I use the Dpad button to take the pic everything works all right. Anyone having the same problem, or anyone knows how to fix it?
have you tried reinstalling the camera?
theres a polaris camera cab for the kaiser floating around somewhere
Did you use the camera cab? If you're using a shortcut to control camera by linking it to a button, check the button shortcut properties. Also, this can happen if your device security is on or if you moved the .exe.
First go into settings/buttons & reassign the camera to the correct button. You may want to use the browse function & make sure you assign the .exe in \windows instead of any .lnk shortcuts you may use. Then try re-installing the camera app. if that doesn't work.
Have you checked that the button is still assigned to the camera.
Start>settings>Buttons icon.
If the camera works ok by going to programmes then the camera is fine, it's just the association to the button that's either broken or has been reset by accident or by a new installation.
Mike
I feel really stupid! I should have checked what button 4 is atually for. I got confused by the icon of the button, which represents a tape, so I thought that was the recording button.
Thank you for your help!
Hi all,
Anyone can help to remap the hard button??
I want to change the Home key to Alt-tab, and the Back key change to OK/Close (1 press for ok and long press for real close the application). I have tried AE button plus, but not function very well.
Attached is the Alt-tab s/w i have used.
Don't know why HTC put a Home and Back key in WM pro device
Thank you very much,
did you reset the device after you changed the settings?
yes, but still doesn't work
There's a software called Hbutton. You might wanna try it.
Just tried Hbutton, but it doesn't work on diamond.........
Awww.. now how am I gonna survive on the diamond without Hbutton?!
There's another software called SmartSkeys (or something oike that) Not sure of it'll work.
Anyone got any suggestions on which software to use to map diamond buttons to many functionalities?
This one works on Diamond: AE Button Plus.
To my understanding from testing AEButton on the Diamond, I have realized that:
The HOME key cannot be remapped.
The Back key is essentially a "WIN" key. You can create a new button and remap the Back key. HOWEVER, the shortcuts DOES NOT WORK when you are at today screen. So here is what I do, I remapped the Back key single click to "Escape". double click to close program, long click to close all programs.
Thats the only logical thing i can think about using the back button due to the limitations.
Any ideas?
Escape = ok/close ?
With AEB Plus I managed to map "action long" to "task manager", but the setting doesn't seem to survive a soft reset.
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Tried AE Button Plus 2.6.3, the "ok" button in AE Button Plus list can refer to back key, my setting is press 1 to minimize, long press to close current application. However, AE Button Plus can't handle the Home button. I already sent a request to them, hope their next version can sort it out.
I'm posting here to find this later. I use AEB on all my devices and want a Diamond. Hopefully it gets "worked out".
tkhs said:
Problem with TouchFLO 3D.
Disable TouchFLO 3D, you might map home/ok button by mappingware.
Setting -> Personal -> Today -> Items
Use SortInchKey, if you enable TouchFLO, you might map VolUp/VolDown/Ok(exclude Today screen) buttons.
Click to expand...
Click to collapse
Yes, the mappings worked when TouchFLO was disabled. But when TouchFLO was enabled again, the mappings then didn't work.
Can someone please help me?
I use a golf GPS/Scoring program on my diamond (mobile golf scorer) and on it there is an option to use hardware button to turn display on/off, this keeps the gps active permantly. Its mapped in the program as 'button c' which from what i can tell should be the 'right hardware button' on a usual ppc.
I'm trying to map it as 'back button' using AEBPlus but it will only work on the main diamond screen or 'today' screen. I've tried mapping it to various buttons on the diamond but When i start the golf program it does not work.
Has anyone any ideas? I need to remap a button that will turn the display off no matter what i'm running.
Thanks again
I'd love to change the function of the "Back Button" aswell,
it has been annoying me since the first day I got it.
HButton seemed very promising, but sadly, it doesn't work.
Do hardware keys also have a registry number like the softkeys?
Like 112/113 for the softkeys?
Wondering anyone will use "Home" and "Back" button regularly....Maybe u guys can share your experience on how to smartly use this 2 buttons as I don't have any idea.........
Hello everyone!
This topic is very actual especially on all russian forums (hpc.ru 4pda.ru 4pda.info). Did anyone overcomed this difficulty with remapping hardware buttons? I tryed AEButton Plus but I was unsuccessfull in remapping the dimaond's "back" button - is there any one who did it? Please share the experience - it would be very very usefull to remap this button and to bind it to launching Dynamo3 task manager.
Thanks in advance.
ILya.
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
aydc said:
None of the programs named here work correctly on the Diamond, including AE Buttons Plus.
However, these buttons CAN be mapped. I know that because the capacitive buttons tester program can detect and show that you pressed these buttons. While this program is active, if you press the home key, it shows that you pressed the home key, but you don't go to the home screen. So it's possible, but only HTC knows how. We need their API's.
Click to expand...
Click to collapse
so this method willn't work too? http://forum.xda-developers.com/showthread.php?t=355141
the silly part on the htc side is to have 3 of 4 hw buttons do almost the same - if you are in an application, pressing home, back or hang-up button will act as "escape". am i wrong?
for one thing, it would be at least useful to have an "ok" button.
the ideal setup for me would be to use the "go to the tf3d home tab" function of the home key by pressing the "hang-up" button and use the home key as "ok"...
Since the Raphael has a full hardware keyboard, maybe there are shortcuts that we can use with HTC's Camera application? Do you guys know any?
More precisely I'm looking for a shortcut to the function "take the picture" ie autofocus then shot.
Actually is there a dedicated camera button for the Raphael? or is it a "virtual on-screen button" like on the Blackstone?
The goal is to remap one of the (few) Blackstone's hardware button to that shortcut.
pressing and holding the PTT button brings up the camera func. Already covered.
It doesn't work on my fuze.
You can remap the PTT button (on the Fuze) to bring up the camera.
Instructions: http://forum.xda-developers.com/showthread.php?t=445498
Works for me!
telegraph0000 said:
pressing and holding the PTT button brings up the camera func. Already covered.
Click to expand...
Click to collapse
Sorry, there is a bit of miss understanding, I don't want to know which button brings up the camera application; I want to know, if the camera application is already running, how do you "take the picture"? by touching the screen? by pressing a hardware button?
incase you haven't read your manuel since posting this question you press the "enter" button aka that button inside the ring of light
incase you haven't read your manuel
Click to expand...
Click to collapse
Sorry, I don't have a Raphael, I have a Blackstone.
Anyway I should have read the online manual to know the "standard way" to take the picture, you're right. However what I really want to know is:
Is there any "hidden" (ie not in the manual) keyboard shortcuts (to take the picture) in your Raphael? That is a way to take the picture without pressing the ENTER button of the D-pad.
This thread can be deleted, sorry for bothering.