Related
Installation procedure:
a) Start installation of 'GarminMobileXTforWindowsMobile_42020w.e xe' from PC through ActiveSync. Select your Storage Card as destination. During the installation, files will be copied to your storage card. The files should appear in '\Storage Card\Garmin\Apps\WM'.
b) Install 'GarminMobileXTSupportFiles_4xxxx.exe' for voice files.
c) Install 'GarminMobileXTFreeBasemap_4xxxx.exe' for Garmin's base map.
Click to expand...
Click to collapse
I have got the above instructions from a different site, but since the Diamond does not have a Storage Card, where I am supposed to install the Garmin app?
I have tried installing to the 4GB internal storage but it's not showing up during the installation as a storage destination. If it's not an option, will it eat up a lot of my valuable storage if I install to the phone default storage?
Also are there any alternative FREE GPS navigation software available for WM6 that worth checking out? This is my first GPS enabled mobile phone and I am anxious to try it out.
I am sorry if this has been answered before, but I have tried to search for an answer to this but not found any.
You install it to "Internal Storage" but that will be obvious because this is the only choice the garminxt install will give you.
I've been playing with GarminXT and so far I prefere it over TomTom.
So how memory would I have left with after installing the main application, the support files and the maps ? I wish if there a way to install to 4GB internal storage instead if using the default phone storage.
Internal storage is the 4GB. Depending on the maps you have... I have a full install of worldwide base + support files + detailed Canada takes up about 200mb... where I have TomTom I can't just chose detailed canada its all of NA or nothing and it takes up 1.4GB.
Go to Device Settings -> Connections -> USB to PC
Once you are inside here, select "Disk Drive (Faster File Transfer)" and also "Ask about connection type when I connect"
This way, when you connect your device to the PC, you can choose wether to enable ActiveSync or Disk mode.
For this specific case, to install Garmin, choose "Disk mode"...this emulates a removable storage on your PC, and then Garmin will detect this.
This is how I've done it, and worked 100%.
Bye
s1rl4ncel0t said:
Go to Device Settings -> Connections -> USB to PC
Once you are inside here, select "Disk Drive (Faster File Transfer)" and also "Ask about connection type when I connect"
This way, when you connect your device to the PC, you can choose wether to enable ActiveSync or Disk mode.
For this specific case, to install Garmin, choose "Disk mode"...this emulates a removable storage on your PC, and then Garmin will detect this.
This is how I've done it, and worked 100%.
Bye
Click to expand...
Click to collapse
Thank you for this tip. This is what I was looking for. Will try it out once I am back home.
Ok I have managed to get Garmin successfully installed in my Diamond However when I installed the files using the 'disk mode' option, I had to disconnect the the USB cable to complete the software installation in my phone as it did not prompt me for any additional steps in the phone when the USB cable is still connected.
Anyways, thank you all for your assistance. I am glad to have found this resourceful forum.
alhinai said:
Ok I have managed to get Garmin successfully installed in my Diamond However when I installed the files using the 'disk mode' option, I had to disconnect the the USB cable to complete the software installation in my phone as it did not prompt me for any additional steps in the phone when the USB cable is still connected.
Anyways, thank you all for your assistance. I am glad to have found this resourceful forum.
Click to expand...
Click to collapse
When the phone is in disk mode the phone itself is not able to see the internal memory. This prevents you from possible locking of files by the phone while trying to manipulate via PC.
Activesync works just as fast as disk mode, it is the phone's usb speed that makes the difference with the diamond.
oke Garmin is installed. But I like to install the maps. But have some problem with the devicecode
vipinholland said:
oke Garmin is installed. But I like to install the maps. But have some problem with the devicecode
Click to expand...
Click to collapse
In Garmin go to settings / about - you will see your Card ID number (internal storage) if it's what you are looking for ... other device IDs are also listed.
tc816 said:
In Garmin go to settings / about - you will see your Card ID number (internal storage) if it's what you are looking for ... other device IDs are also listed.
Click to expand...
Click to collapse
THANKS I will try if it's works
I have a problem with my Garmin (last version, with Western Europe map NT2008 and basemap)...
The map is very slow, and very inacurate
Any ideias why, and how I can fix it?
Bye
s1rl4ncel0t said:
I have a problem with my Garmin (last version, with Western Europe map NT2008 and basemap)...
The map is very slow, and very inacurate
Any ideias why, and how I can fix it?
Bye
Click to expand...
Click to collapse
try disabling touchflo 3d report back if that increase sperformance.
Ok, probably an easy one this, but I've installed Mobile XT on my diamond but when I fire it up it tries to look for a bluetooth GPS reciever. How do I tell it to use the built in unit on the diamond?? Thanks
clemo71 said:
Ok, probably an easy one this, but I've installed Mobile XT on my diamond but when I fire it up it tries to look for a bluetooth GPS reciever. How do I tell it to use the built in unit on the diamond?? Thanks
Click to expand...
Click to collapse
Settings - System
Remote GPS
Hit Enable
Hopefully that should work
Enable?
I have the same problem
Could you be a little more precise about "Hit Enable"?
I don't have that setting under Settings-System in-Remote GPS
And shouldn't it be a setting somewhere inside the Garmin application since there is no problem using Tomtom with the internal GPS?
But in Garmin I can´t find anywhere to change GPS-settings and when I go into the settings about gps in Garmin it starts looking for a bluetooth gps right away with no possibillity to change.
When I said - SETTINGS, SYSTEM
I meant the ones in the GARMIN APPLICATION!
L o r d R a j said:
When I said - SETTINGS, SYSTEM
I meant the ones in the GARMIN APPLICATION!
Click to expand...
Click to collapse
Oops Sorry
When I go to Settings-System the number one choice there is External GPS and when I click that I get the message "Only connections to Garmin GPS-unit is allowed" ???
/M
You need to unlock your GPS or rather the Garmin XT software for it to work with your internal GPS. You do this by using JetMouse Keygen 1.3 (or 1.5) and pasting the generated code based on your Device ID (explained in a previous post where to find that) into a txt file called sw.unl (note pls make sure that the .txt extension is changed to .unl) to be placed into your garmin folder. For JM just google for it.
ionrage said:
You need to unlock your GPS or rather the Garmin XT software for it to work with your internal GPS. You do this by using JetMouse Keygen 1.3 (or 1.5) and pasting the generated code based on your Device ID (explained in a previous post where to find that) into a txt file called sw.unl (note pls make sure that the .txt extension is changed to .unl) to be placed into your garmin folder. For JM just google for it.
Click to expand...
Click to collapse
OK Thanks.
I suppose if I had been more patient and read all of the threads more thorough, I should have discovered that.
When I saw your answer I recognized it but couldn't make the connection to my problem.
Sorry all, for repeating things that I most certainly should have been able to have found in earlier threads, but never the less many thanks for the input.
hey there,
im using my day off to play a little bit with my td. now i would like to build network connection via wlan through my router to my desktop so i can move files from pc to ppc and vica versa. problem is that im not able to see my desktop on the phone, nor to see my phone on the desktop. i cant even get into any filesharing option(s) on the diamond
since now im using resco explorer...
help needed
What have you tried so far?
In Resco Explorer, try Menu > File > Network > Map Drive and then enter the computer name and share in the format \\computer\share.
You may find there are no computers/shares listed in the bottom window (hence why you have to manually enter it above) however in my case I'd always put this down to me using Samba on Linux but perhaps it just doesn't support this sort of network 'browsing' to find what shares are available.
Mathew
yeehaaw thanks a lot! that made it. still a a bit uncomfortable but i think once added i dont have to reenter the path.
so now i just have to figure out how to make this work vice versa... wonder if it is as easy as it sounds i'll let you know
thanks so far!!
I don't think it's possible the other way round... but that shouldn't matter as from your phone you've got two-way traffic right now.
You're right about not needing to reenter the name - just hit My Device at the top (or traverse up to the tree to the top) and you'll find a My Network at the same level - inside here is your previously mapped share(s).
Mathew
Hi,
I have tried to map my Vista laptop via Resco as stated above but comes up with error :
Cannot map network path, network resorce cannot be found.....
As I dont fully understand what I am doing can someone do a walkthough please?
I have tried to search the forum, but can get it to search keywords.
Thanks in advance
PS Can I map the internal storage via windows explorer?
You guyz should try Total Commander, it has a plugin for LAN. Works very good, even transferring big files. Running Vista Ultimate.
Greetings.
Thanks Sergio for your reply, I have total commander but have no idea how to use it, Can you offer any step by step instructions to connect to my vista laptop.
Thanks
creeky said:
Thanks Sergio for your reply, I have total commander but have no idea how to use it, Can you offer any step by step instructions to connect to my vista laptop.
Thanks
Click to expand...
Click to collapse
Sure no prob do this:
-Turn your WiFi connection. (usually best performance settings works best)
-Access Total Commander.
-In the main page, where you see Internal Storage and device. You should see a folder named \\Plugins. Access this folder.
-Then access the folder named LAN.
-Then access the <new server> option.
-Name your connection.
-When asked for the server name, type in the computer you want to access (you can find the name by going in your PC to the network file and check which files are shared on your computer, click on them and you should get the name of the server "pic attached")
-You are done enjoy.
-Vista kicks assss.
Greetings to all.
Thanks Sergio,
I have followed your steps,Now I can connect to the Laptop folder in the network Directory which is the location \\LAPTOP. I can connect fine but the folders are not visable so appears to be empty in Total Commander which we know its not.
I also have a NAS drive which I can connect to following your steps with ease. Trouble is I dont want to use this as it is by Back up drive.
Do you have any ideas?
Thanks again.
Dan
Who is able to help me?
On this forum i found two treads on how to access the SD / HDD from Snapvue side.
I did not get it done.
I did the following:
Liberated shift and made it WM 6.1 on Snapvue side.
Set SD HDD and Memorystick to share on vista side.
Installed Total Commander and VM Netbroweser on Snapvue side.
Set the USB tool to connect.
Both arrows came on and activesync started.
Still, using both programms, i am not able to access SD, HDD or memorycard via Snapvue side. By the way Vista was running while trying.
I am a very frequent user of WM6.1 and the fact that the Shift has WM6.1 as well as Vista made it my perfect notebook solution. The battery life on Snapvuemode is the best feature for me but the memory is way to small.
Access to SD card would make my day / week / month / year / life.....
A sollution? anyone?
Thanks in advance.
Qtek9000Jan (sorry, still big fan of this PDA / phone)
I hope that you are better with Windows Mobile than with this forums search-function.
How to Access shift hdd/sdcard on snapvue
Good luck!
Thanks Peppie.nl.
The link was found by me already.
I tried averything as mentioned in that tread, thats why i installed Networkbrowser.
I also found an other tread (about TomTom7 on snapvue.)
Tried everything written down there aswell to access SD card using Total Commander.
Still not able to access SD card.
Would appreciate any help in this.
Best regards,
J. Otterspeer
The Netherlands
Still no help?
Hello,
Is there enyone who is able and willing to help me with this problem.
As written above; i am not able to access the SD card from Snapvue side.
I found two posts on the forum and followed every step of them.
It does not work.
Probably i am doing something wrong, but not sure what.
Any suggestions?
Many thanks for help.
Jan Otterspeer
The Netherlands
Check that the sd card and hdd are set as shared drives.
In vista network and sharing center - Network discovery is on - file sharing is on.
hope this helps.
Tried the above
Thanks Scott for your help.
Sd card is on SHARED
NEtwork settings are as you suggest.
still no luck
I am thinking it might be the networkpath...
What should that be?
I am trying for example:
\\X9500Jan\D:\
and
\\HOME\X9500Jan\D:\
Home = workgroup
X9500Jan = computer name
D: = Driveletter of Sd card
Very eager to get it done.
Best regards,
Jan Otterspeer
The Netherlands
Qtek9000Jan said:
I am thinking it might be the networkpath...
What should that be?
I am trying for example:
\\X9500Jan\D:\
and
\\HOME\X9500Jan\D:\
Home = workgroup
X9500Jan = computer name
D: = Driveletter of Sd card
Click to expand...
Click to collapse
Try:
\\X9500Jan\D
also make sure ur windows firewall is not blocking ports etc and password enabled sharing is disabled. Try disabling windows firewall or any other firewall and try ... i have usually found firewall's to be the culprits in such situations!
I use vm net browser and dont need to type any path
when net browser is open highlight my network then click on file then network then rescan network you then should get message "network scan on dialup connection will take a very long time do you want to proceed" click yes - after it scans the network you should see the workgroup under my network, mine also picks up a workgroup "unknown"
Going to do a hard reset
Thanks Scottt
I had already installed net browser
It found a ip adress but i was not able to access.
After installing an other browser (Resco Explorer)
Net Browser keeps giving a message that the scaner (no this is not a type fault this was the message...) failed.
I uninstalled all other browsers (Like Total Commander en Resco Explorer) and reinstalled Net Browser.
The bug keeps coming back.
I now am going to do a hard reset of Windows Mobile and install the latest rom.
any suggestions of which one is best?
Am very busy at the moment so don't know when i will be able to do the reset.
Will come back on it soon.
Thanks sofar....
Jan Otterspeer
The Netherlands
Qtek9000Jan said:
Thanks Scottt
I had already installed net browser
It found a ip adress but i was not able to access.
After installing an other browser (Resco Explorer)
Net Browser keeps giving a message that the scaner (no this is not a type fault this was the message...) failed.
I uninstalled all other browsers (Like Total Commander en Resco Explorer) and reinstalled Net Browser.
The bug keeps coming back.
I now am going to do a hard reset of Windows Mobile and install the latest rom.
any suggestions of which one is best?
Am very busy at the moment so don't know when i will be able to do the reset.
Will come back on it soon.
Thanks sofar....
Jan Otterspeer
The Netherlands
Click to expand...
Click to collapse
It is not nescescary to hard reset your device. The ip-adress you can see in net browser is probably only a localhost adress (169.254.2.1?). Make sure that ActiveSync is connected to Vista and filesharing enabled. (Right-click the folder you want to share in Vista, select properties -> sharing tab -> Advanced Sharing -> Mark "Share this folder" -> click permissions -> Add your Vista username and select all permissions -> click OK)
If you still cannot see Workgroup and your computer name under netbrowser, you will have to disable/add exception to your Windows firewall.
Hope this is helpful
Finally, it works after hardreset
Hello,
Everybody who helped me with this problem: THANKS!!
After a hardreset and installing a new rom i am able to finally access the SD card on Vista side from the "Snapvue" side.
Will buy lisence for Netbrowser in a few days since this a trail version for 14 days.
Thank you.
I also managed to install Total Commander on Snapvue side from SD card and also was able to copy a .CAB file from SD card to Snapvueside so it could also be installed.
PERFECT....
Best regards,
Jan Otterspeer
The Netherlands
Hey all,
I got most of this working, got Network Browswer installed and can see my computer, only my shares arent showing up, i've given full access to EVERYONE and my username on the vista side to both a single folder and my C: drive but nothing is showing up at all.
Any ideas?
Is it possible to allow the X1i internet access through a PC that has a connection to the internet itself?
I've been googling but was unable to find an answer Tried ICS but it didn't want to work. Any tips appreciated!
Shoyu said:
Is it possible to allow the X1i internet access through a PC that has a connection to the internet itself?
I've been googling but was unable to find an answer Tried ICS but it didn't want to work. Any tips appreciated!
Click to expand...
Click to collapse
This has been asked, discussed and answered before.
May I suggest you to search previous threads titles to find ample details about this
BTW: YES it works a treat and it's worth (at least for me)
I can share my 3600kbps HSDPA internet to my laptop and my PC by just plugging the USB cable or thru WiFi
All you need is activesync and launch the "internet sharing" program
gtrab said:
This has been asked, discussed and answered before.
May I suggest you to search previous threads titles to find ample details about this
BTW: YES it works a treat and it's worth (at least for me)
I can share my 3600kbps HSDPA internet to my laptop and my PC by just plugging the USB cable or thru WiFi
All you need is activesync and launch the "internet sharing" program
Click to expand...
Click to collapse
That's the other way around from what he wants, from what I understand he wants to share from PC to phone. You need to check "enable advanced network functionality" on the phone, and configure ActiveSync to share the connection, forgot which part of the AS UI it's in (I've been using Vista for too long, and Vista does this by default)
Um...yeah, my xperia does this automatically. I have not configured anything either on the phone, or on the pc itself. I have customized all the programs that need internet updates (like weather, rss feeds etc.) to update themselves when the phone is connected to the pc. Works like a treat and it doesn't matter if it's activesync or simple usb data connection.
Leddy said:
That's the other way around from what he wants, from what I understand he wants to share from PC to phone. You need to check "enable advanced network functionality" on the phone, and configure ActiveSync to share the connection, forgot which part of the AS UI it's in (I've been using Vista for too long, and Vista does this by default)
Click to expand...
Click to collapse
Leddy thank you. The "enable advanced network functionality" on the phone was already checked, but I still could not find the desktop pass-through option in my ActiveSync 4.5 software on the desktop.
I did not give up though and I've finally got mine working - so for those who experience the same issue, this is what I did:
1. Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
2. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and programs on your phone will now have internet access.
This worked well for me. Another possibility that I haven't tested is because I set my "Computer is connected to the Internet" as illustrated here:
http://blogs.msdn.com/windowsmobile/archive/2006/11/20/wmdc-activesync-pass-through-feature.aspx
Thanks guys!
I think it needs set up proxy setting on PDA and install proxyserver soft on PC...
thank you for the sharing... will try....
Internet by Activesync
Also, If you PC is running a firewall, you might need to 'allow' activesync in the firewall settings.
Shoyu said:
Leddy thank you. The "enable advanced network functionality" on the phone was already checked, but I still could not find the desktop pass-through option in my ActiveSync 4.5 software on the desktop.
I did not give up though and I've finally got mine working - so for those who experience the same issue, this is what I did:
1. Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
2. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and programs on your phone will now have internet access.
This worked well for me. Another possibility that I haven't tested is because I set my "Computer is connected to the Internet" as illustrated here:
http://blogs.msdn.com/windowsmobile/archive/2006/11/20/wmdc-activesync-pass-through-feature.aspx
Thanks guys!
Click to expand...
Click to collapse
Thank you Shoyu, your steps works for me too
Thanks Shoyu ... just had to change the setting to " Computer is connected to the internet" at the end and it worked like a charm!! ... Atlast someone providing a solution to a question instead of directing to a search!!
Hello,
I'm still working on the different sound topics, but here are my newest roms.
I call them age of reason and age of beauty. This is a kind of trial for the second one...
The point is that we need a rom to really use the shift possibility. We need storage space, real gps useage, and of course maximum ram.
This is the age of reason rom. The lightest possible rom, where you can add a lot of programs, more if you use UPX compression.
You need to flash the radio from the phone+gps rom before using this one.
What does it have:
42 Mb storage and 22 Mb memory free
WORK on WINMOB SIDE
All standard Winmob application (ie, notes, media player, sms, phone, gps)
Task manager to soft reset, kill process, etc...
Clear temp (as requested)
USB tools
A homemade program to switch the speaker when on call. This program is for my development my roms only, and it work as a service, so it cannot be killed by the OS.
There is a managment program to remove the service if needed.
WORK WITH VISTA
storage:
A network browser to access the vista HDD
GPS:
An automatic GPS redirection to the PC side
This program is GPS2Blue, and it is preconfigured. You just have to launch the shortcut in HTC debug tools, and setup vista to get communication.
GPS works on both side, so you can use it on Windows mobile too of course
A few words on this last program.
GPS2Blue is a program made by Paludour. You can check his website here:
http://www.paludour.net
He allowed me to add this program to my roms, as you must normally download the cab from his site. This way, I could put it preconfigured on our devices. Many thanks to him for that.
When you are connected with usbtools to vista, click on this gps2blue icon, and you can receve the gps on vista if you follow this guideline:
http://www.paludour.net/GPS2BlueFAQ.html#USB
Just click on the gps2blue icon when you have to do the PDA side of this tutorial, the rest is aleady done.
The link for this rom is here:
http://www.mediafire.com/file/jjjm0ydmmz5/Light.rar
MD5: 4c31ba01b109e22cd77bc3da53220672
Mirror:http://www.filesavr.com/light_1
Now for the other rom, the age of beauty:
This rom is the same, with one little twist: there is pointUI pre-installed.
This is a test, as I don't know if this is a good way instead of installing it afterward. Anyway, you are good for some eyecandy.
You have to pay for this: you have only 37 Mb of sorage, and 9 (yes, nine) megs of free memory after reset. But the good news is that you can disable it, and still be using the rom. So you can choose when you want eye candy, and when you want to be serious. If it is requested, I might update this one.
The link for this one is:
http://www.mediafire.com/file/3zmtnyi2mjh/Full.rar
MD5:fe2a2d6592339c29c994e4a2e6638d1e
Enjoy and report here if you like it.
How to connect to vista side:
first, know the name of your shift. If you didn't change it it is SHIFT, otherwise type hostname in a command line in vista side.
then type services.msc and make sure the server service is started and set up to automatic if you want it to start every boot
Now type \\shift in your start menu. A windows must open, and you should see thinks, like Users,and printers. If not, don't worry, you can still go on. For more advanced users, it can be a good time to set up a share.
Now go on Snapvue side, and go to settings-connections-network plugin. First click on the "enable network folder" and wait for the reset.
Now, when reset is done, start usbtools to activate activesync. On vista side, make sure you are connected ( set up a partnership, or just click on connect whitout partneship. In this case, you will have to do it each time.)
Go back on Snapvue, and in network plugin click on New...
In remote path, enter \\shift\users if shift is your computername, and if you saw Users in the window on the second step.
Otherwise, you can enter \\shift\c$ to access the whole drive.
Click on map drive. Enter your username and your password (the one you use to login in vista)
Now, you can browse the pc using the network folder. You can add music to media player, browse pictures, wmv video...
You can even install some progs on vista side, but I don't recommend it. You might use it also as a data storage for SPB insight (my little baby) for example
thank you.
thaihugo said:
----RESERVED------------
Click to expand...
Click to collapse
PointUI 2 is good, but I liked PointUI1.5 better. If they could let us choose the search provider that would be awesome.
--Rama--
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
----
The ROM looks and feels supersweet. However, if you work with it
for some time it get's laggy. No harm, we all understand it's a test.
Will play with the GPS2Blue thing to get that fixed too.
lucid said:
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
Click to expand...
Click to collapse
No, but I think this is going to be solved without flashing a new rom
Thanks ThaiHugo.
I preferred "age of beauty". How works the network browser to access the vista HDD? I am not able. If you can help me please.
Thanks Thaihugo, this rom is really good and a lot of free memory and storage for programs. Only problem is that when I have Vista side open gps isn't working for me. Well it is working (satellite used about 4-10) but Satellite Fixed stays 0. When I turn off vista side Satellite Fixed is after a few seconds 5-7.. I have Windows 7 build 7000 installed on vista side and Light version on snapvue side
JaWe said:
Thanks Thaihugo, this rom is really good and a lot of free memory and storage for programs. Only problem is that when I have Vista side open gps isn't working for me. Well it is working (satellite used about 4-10) but Satellite Fixed stays 0. When I turn off vista side Satellite Fixed is after a few seconds 5-7.. I have Windows 7 build 7000 installed on vista side and Light version on snapvue side
Click to expand...
Click to collapse
I have the same problem, but I've had this with other roms too
Thanks for this... I do not have Auto Connection
It does not seem this new beatiful ROM has auto connection, not been able to connect WM 3g or am I missing something? Thanks
feyisetan said:
It does not seem this new beatiful ROM has auto connection, not been able to connect WM 3g or am I missing something? Thanks
Click to expand...
Click to collapse
I removed automatic connection setup to save space. You need to setup your connection by yourself in settings-connections. Once done, it will connect automaticaly. Most providers can sen you a sms from their web site with connection settings.
I'm not sure you want to lose 3 megs of storage for this one time operation, do you?
Downloading the ROM
Thanks
lucid said:
Thanks ThaiHugo !
Flashing the rom at this very moment. PointUI
Has this ROM a higher mic gain setting as the default, i.e. is the microphone
issue solved (low sound recording volume) ?
Will report in this post later on.
----
The ROM looks and feels supersweet. However, if you work with it
for some time it get's laggy. No harm, we all understand it's a test.
Will play with the GPS2Blue thing to get that fixed too.
Click to expand...
Click to collapse
If you want, you can just disable the today plugin, and you get a full working wm for when you want to be serious. And you just soft reset when you are just using it as an updated snapvue.
To disale fully pointui:
delete the shortcut in \windows\startup (start2) and disable the today plugin.
To reenable, recheck the today plugin.
your rom is the best
thaihugo said:
If you want, you can just disable the today plugin, and you get a full working wm for when you want to be serious. And you just soft reset when you are just using it as an updated snapvue.
To disale fully pointui:
delete the shortcut in \windows\startup (start2) and disable the today plugin.
To reenable, recheck the today plugin.
Click to expand...
Click to collapse
Thaihugo, I love your rom very much so fast and simple,easy for install software and hope many function will be coming
added tutorial to connect the vista HDD on second post.
siriokeliang said:
Thanks ThaiHugo.
I preferred "age of beauty". How works the network browser to access the vista HDD? I am not able. If you can help me please.
Click to expand...
Click to collapse
You can read my tutorial on post 2.
thaihugo said:
You can read my tutorial on post 2.
Click to expand...
Click to collapse
I'll swear that I had not seen.
siriokeliang said:
I'll swear that I had not seen.
Click to expand...
Click to collapse
I posted it today only, after you requested it
Installed the 'light' ROM yesterday. Works great.
Thanks again
thaihugo said:
Hello,
I'm still working on the different sound topics, but here are my newest roms.
I call them age of reason and age of beauty. This is a kind of trial for the second one...
The point is that we need a rom to really use the shift possibility. We need storage space, real gps useage, and of course maximum ram.
This is the age of reason rom. The lightest possible rom, where you can add a lot of programs, more if you use UPX compression.
You need to flash the radio from the phone+gps rom before using this one.
What does it have:
42 Mb storage and 22 Mb memory free
WORK on WINMOB SIDE
All standard Winmob application (ie, notes, media player, sms, phone, gps)
Task manager to soft reset, kill process, etc...
Clear temp (as requested)
USB tools
A homemade program to switch the speaker when on call. This program is for my development my roms only, and it work as a service, so it cannot be killed by the OS.
There is a managment program to remove the service if needed.
WORK WITH VISTA
storage:
A network browser to access the vista HDD
GPS:
An automatic GPS redirection to the PC side
This program is GPS2Blue, and it is preconfigured. You just have to launch the shortcut in HTC debug tools, and setup vista to get communication.
GPS works on both side, so you can use it on Windows mobile too of course
A few words on this last program.
GPS2Blue is a program made by Paludour. You can check his website here:
http://www.paludour.net
He allowed me to add this program to my roms, as you must normally download the cab from his site. This way, I could put it preconfigured on our devices. Many thanks to him for that.
When you are connected with usbtools to vista, click on this gps2blue icon, and you can receve the gps on vista if you follow this guideline:
http://www.paludour.net/GPS2BlueFAQ.html#USB
Just click on the gps2blue icon when you have to do the PDA side of this tutorial, the rest is aleady done.
The link for this rom is here:
http://www.mediafire.com/file/jjjm0ydmmz5/Light.rar
MD5: 4c31ba01b109e22cd77bc3da53220672
Now for the other rom, the age of beauty:
This rom is the same, with one little twist: there is pointUI pre-installed.
This is a test, as I don't know if this is a good way instead of installing it afterward. Anyway, you are good for some eyecandy.
You have to pay for this: you have only 37 Mb of sorage, and 9 (yes, nine) megs of free memory after reset. But the good news is that you can disable it, and still be using the rom. So you can choose when you want eye candy, and when you want to be serious. If it is requested, I might update this one.
The link for this one is:
http://www.mediafire.com/file/3zmtnyi2mjh/Full.rar
MD5:fe2a2d6592339c29c994e4a2e6638d1e
Enjoy and report here if you like it.
Click to expand...
Click to collapse
i can't download from the above link,can you upload to other site
leonlsl said:
i can't download from the above link,can you upload to other site
Click to expand...
Click to collapse
It's pointless if you don't say which rom you want, and which site you can download from.