Database Develop

Need Help with Calculator

Hi
I just got my Diamond, as ussual comes with the rubbish WM Calculator, so I thought I'd update it to the HTC skin which I also did on my Orbit 2, Only problem it doesn't work on the VGA, so I uninstalled but now my original calculator doesn't work any more?
What can I do?
Cheers
Richard

hard reset is my thought.....or you can try searching for the original calculator cab.....i'm sure it's on the forum...

Just pulled the batt out while on, assuming thats a hard restart. Still the same.
This is the error:
The file 'calc' cannot be opened. Either it is not signed with a trusted certificate , or one of its components cannot be found etc...
Couldn't see an original CAB for VGA device?

well read in the book to find out how to do a hard reset on the diamond.(i don't have one so i doon't know i'm just trying to be as helpfull as possible since this thread will probably almost be ignored) a hard reset is like a format of your phone to bring everything back to the defaults.....or you can use the search function of the forum to look for the original HTC Diamond calculator cab file......

I happen to be at work, I don't have the manual to hand, why would this be ignored anyway I thought this was the place to find friendly help! I always thought a hard reset was just pulling the battery while switched on but that does not restore default settings. Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Thanks anyway but no need to get funny about it!

was not trying to be funny....was just saying that this developer site sometimes ignores little threads like this....a missing calculator is not a big concern to devs....anyways i'm glad you got it working...i knew theire had to be a cab file for the calc somewhere on here.

Still, can the default WM6 calculator be skinned? Looks horrid compared to the rest of the interface

i'm wondering the same thing.. this calculator needs a new look
btw, hard reset is volume down + enter key + reset

richardirv said:
Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Click to expand...
Click to collapse
Hi richardirv
I have exactly the same problem and would prefer not to do a hard reset unless absolutely necessary.
Is there any chance you could tell me where you found the Microsoft calculator.cab ?
Thanks in advance

My Calculator is Gone as well!!
If you (richardirv) could please post were you found that ms calculator cab it would be appreciated by many!!
I have been searching for a while to a fix for this. I too tried installing the HTC skin and did not work. When I uninstalled it the calc.exe file was gone leaving me with no calculator.
I have many custom settings and programs and would hate to do a hard reset for a calculator.
Thanks a bunch in advance!!
HTC Touch Pro
WM 6.1
nevermind richardirv
found it!!: http://forum.xda-developers.com/showthread.php?t=399943&highlight=Microsoft+calculator.cab
thanks to TheOne_ for posting it!!

HTChome favorite people problem...

I searched and only found one post in the Vogue forums which was not much help so hopefully you diligent peeps can...
I am using HP IIIs ROM w/ the latest HTChome cab. But for some reason anytime I save contacts to the favorites tab and soft reset, they are erased on boot. Anyone know how to resolve this? Thanks

anyone know?

This only happens when you install the HTC Cube.
You need to delete a registery key named "QuickDial"
Check some of duttyroy's threads. Or contact him, he knows how to fix it.

Or you could enable cube and insert the contacts through cube. After this contacts are not lost after restart.

that's weird guys b/c I have never installed the cube.....I will just do a hard reset. Thank you for your knowledge guys!

You don't necessarily have to install cube. It is probably included in your ROM especially if you are using a Duttys ROM. So a hard reset will do nothing.

I will try to find another solution for u. In the meantime edit your links through cube.

remove Quickdial from [HKEY_LOCAL_MACHINE\Software\OEM\MASD]
hope this help.

twisted said:
remove Quickdial from [HKEY_LOCAL_MACHINE\Software\OEM\MASD]
hope this help.
Click to expand...
Click to collapse
No QuickDial under that string
I am using SJ's hyperdragon IIIs Lite. There is no cube involved. When I was installing some cabs a while ago, it might have been possible that I accidently selected a cube cab but canceled. I have no cube but I did have that biotouch registry key
Thanks to all you guys. Way too benevolent. Seriously, though, I'm in need of a hard reset. It's no biggie. It would be nice to just know what needs to be done to correct this issue but I don't wanna waste yall's time.

All SIP's go back to default SIP.

I've gone through multiple Roms, different versions of hyperdragon III, and different versions of PDAcorner. When I try to select a different keyboard, it loads for a second, then goes back to the default. The only keyboards that work are other defaults, such as Block Recognizer, Letter Recognizer, and Symbol Pad.
SOMETIMES PCM keyboard works, but NEVER has any of the diamond keyboards every worked.
I've even tried SIPchange, but the same thing happens. I assume the same has happened to you guys too? did you ever fix it?
thanks!

Is it just me?
How many of you use the Diamond Keyboard, or keyboard other than the default?

default IM
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
The default cab is the ticket...it works when everything else fails. I don't even bother with the other stuff now. If the sip won't stick, I just install that cab and select it. A soft reset later and you are good to go.

Ramey said:
are you still having the same problem? did you ever try using the default im cab for wm5?
it worked for pcm, but i never tried it with the diamond keyboards.
Click to expand...
Click to collapse
I'm not sure what you mean by default im cab for wm5... lol

mikeeey said:
I'm not sure what you mean by default im cab for wm5... lol
Click to expand...
Click to collapse
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...

parleyp said:
I have attached attached it below. Also there are other keyboards that work better than the diamond ones...raphael and opal work much better. Do a search for their cabs...
Click to expand...
Click to collapse
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?

default im selector instructions
mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
.
edit:
sipchange and imSelector did nothing... could someone kindly link me to the 2 keyboards? lol
thanks.
.
edit: (5 seconds later)
PCMkeyboard just quit working again...
Click to expand...
Click to collapse
1. install the default im wm5 cab above
2. install the opal keyboard you want
3. start > programs > im selector > opal keyboard
4. start > settings > personal > input > opal keyboard
5. soft reset
-----
you may need 2 soft reset twice before it cooperates. if you have your phone password protected, the default keyboard you selected will never show until AFTER you enter the password.
only RARELY do i get a glitch now, and a reset usually fixes the problem.
let us know!

mikeeey said:
doesnt work... atleast not with PCMkeyboard. I'll reinstall PCM.
I cant seem to find the raphael and opal keyboard.. but I'm going to keep ssearching lol.. i dont wanna sound like a complete noob!
edit:
sipchange and imSelector did nothing... the only reason I fixed PCMkeyboard was cause uninstalled the old and re installed it.. as far sa the raphael and opal keyboard.. i downloaded something, but im not sure if it was it, so.. could someone kindly link me to the 2 keyboards? lol
thanks.
edit: (5 seconds later)
PCMkeyboard just quit working again, and imSelector and sipchange doenst fix it.
So instead i must ask... what roms are you guys using that support SIPS?
Click to expand...
Click to collapse
I am in the same boat as you and the only keyboard that I have gotten to work is resco keyboard.....I have same exact problems as you...did you ask SJ about it....

SJ's opal keyboard
im having problems attaching files, but SJ's keyboards can be found here.
apply the default im instructions and a couple of soft resets later, you should be good 2 go.

I played with a Samsung Omnia yesterday, I really liked the keyboard SIP, is it possible to download and get to work on our kaiser's.

not sure...

HTC Dialer CAB

I installed and have since uninstalled Pocketshield (don't ask made lots of posts about my saga) and lost my HTC dialer interface in the process. Does anyone know where the cab is to re-install it back into my device without having to hard reset the thing again.

Pls take a look at here , your dream will come true !!!
http://forum.xda-developers.com/showthread.php?t=464286

It work greats on my Touch Pro !!! Slide to Answer and Slide to ignore .

Power of all
Well I just used the advanced config program and was able to restore it (kinda) to a HTC image so I do recommend it since it seems to have a ton of features.
http://www.touchxperience.com/en/ad...vanced-configuration-tool-33-cab-install.html

http://forum.xda-developers.com/showpost.php?p=3103295&postcount=244
slide to answer and curtain to block from hitting buttons in a call.
i have only tested this on my fuze only at this time.
follow all steps and enjoy

thanks
webfrm said:
Well I just used the advanced config program and was able to restore it (kinda) to a HTC image so I do recommend it since it seems to have a ton of features.
http://www.touchxperience.com/en/ad...vanced-configuration-tool-33-cab-install.html
Click to expand...
Click to collapse
thank u... i've same problem with you.i think i shoul do a hard reset.however after i read your post ;now my phone dialer on htc touch diamond 2 became normal.my phone dialer became abnormal after i install innersoft phone dialer.i haved uninstall it but still available.i hate innersoft phone dialer...thank for your recommendation.sorry...my english grammar still broken.im not english man.

touchflo not showing

hi
i just got this phone unlocked thru ebay, popped in my sim and its working fine. the issue im having is that its at the ugly big green default wm 6.1 screen and not touch flo.
i basically want the default touchflo theme running and have been looking through the settings tab and selecting the htc black.tsk and selecting "beam" but nothing happens.
any help would be appreciated and apologies for my retarded noob question.
this phone is really cool and im glad i picked one up as aformer pantech duo owner.

anyone?
i guess i dont have the default touchflo theme.
anyone know where i can find it? the link in the thread for basic utlities is down and doesnt work.
thanks

hard reset
Since you have the phone for only a day, i suggest a hard reset. Unless you installed & tweaked all night long, not much will be lost...

yeah ive done a hard reset but nothing changes. its basically at the default wm 6.1 screen and not the touchflo interface. ive downloaded tf3d config but nothings going on...
??

i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?

embryosys said:
i guess what im missing is the "touchflo3d" option in the today settings tab.
anyone know where i can find it?
Click to expand...
Click to collapse
have u enabled the touchflo by ticking the box next to it in today items, the tab after the theme
if not install this cab
http://rapidshare.com/files/173056510/Diamond_manila_by_Swtos.cab

do i install on device or internal storage?

embryosys said:
do i install on device or internal storage?
Click to expand...
Click to collapse
you have to install on the device it wont let you install to the internal storage

If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?

Sandeman1976 said:
If he has done a hard reset and nothing changes, I think that means there is a non-original ROM on it...?
Click to expand...
Click to collapse
it could be he has a fake diamond