Related
Hi
I just got my Diamond, as ussual comes with the rubbish WM Calculator, so I thought I'd update it to the HTC skin which I also did on my Orbit 2, Only problem it doesn't work on the VGA, so I uninstalled but now my original calculator doesn't work any more?
What can I do?
Cheers
Richard
hard reset is my thought.....or you can try searching for the original calculator cab.....i'm sure it's on the forum...
Just pulled the batt out while on, assuming thats a hard restart. Still the same.
This is the error:
The file 'calc' cannot be opened. Either it is not signed with a trusted certificate , or one of its components cannot be found etc...
Couldn't see an original CAB for VGA device?
well read in the book to find out how to do a hard reset on the diamond.(i don't have one so i doon't know i'm just trying to be as helpfull as possible since this thread will probably almost be ignored) a hard reset is like a format of your phone to bring everything back to the defaults.....or you can use the search function of the forum to look for the original HTC Diamond calculator cab file......
I happen to be at work, I don't have the manual to hand, why would this be ignored anyway I thought this was the place to find friendly help! I always thought a hard reset was just pulling the battery while switched on but that does not restore default settings. Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Thanks anyway but no need to get funny about it!
was not trying to be funny....was just saying that this developer site sometimes ignores little threads like this....a missing calculator is not a big concern to devs....anyways i'm glad you got it working...i knew theire had to be a cab file for the calc somewhere on here.
Still, can the default WM6 calculator be skinned? Looks horrid compared to the rest of the interface
i'm wondering the same thing.. this calculator needs a new look
btw, hard reset is volume down + enter key + reset
richardirv said:
Anyway I have just managed to fix it, I found a cab file called Microsoft calculator.cab and it has restored it.
Click to expand...
Click to collapse
Hi richardirv
I have exactly the same problem and would prefer not to do a hard reset unless absolutely necessary.
Is there any chance you could tell me where you found the Microsoft calculator.cab ?
Thanks in advance
My Calculator is Gone as well!!
If you (richardirv) could please post were you found that ms calculator cab it would be appreciated by many!!
I have been searching for a while to a fix for this. I too tried installing the HTC skin and did not work. When I uninstalled it the calc.exe file was gone leaving me with no calculator.
I have many custom settings and programs and would hate to do a hard reset for a calculator.
Thanks a bunch in advance!!
HTC Touch Pro
WM 6.1
nevermind richardirv
found it!!: http://forum.xda-developers.com/showthread.php?t=399943&highlight=Microsoft+calculator.cab
thanks to TheOne_ for posting it!!
I NEED HELP URGENTLY! I Messed up my htc manila dialer by installing another stupid dialer software Now I need the original full dialer, mine was deleted by sktools while forcing the uninstall of the previously added dialer! Please provide with the dialer cab as soon as possible!!! I'm not able to make any phonecalls at all I'M SO PISSED
hard reset not possible..?
Hard reset or use the WM-dialer. Piece of cake.
i dont wanna hard reset, i got so many applications installed on my diamond, and most of them required precision tweaking to work exactly as I want them...I am using wm dialer right now ...but I really need the htc dialer back!
Diamond Dialer???
christiano88 said:
i dont wanna hard reset, i got so many applications installed on my diamond, and most of them required precision tweaking to work exactly as I want them...I am using wm dialer right now ...but I really need the htc dialer back!
Click to expand...
Click to collapse
...did you get it?? I'm in the same situation now...
unfortunately I had to hard reset, all ok now
Hello Seniors,
I have a Tytn II with normal Rom version 3.29.707.0 WWE
Radio Version is 1.65.16.25
I am very new to this ROM cooking & flashing thing but it looks amazing & interesting to see how you make your devices look mesmerizing with all those features that you work upon. I read few instructions about how to install these cooked roms with RUU files..But due to lack of knowledge & experience, it doesn't seem to be working for me. I am looking forward to a Manila 3d or 2d rom's .cab file which comparatively is easier to install. Can someone please help me with a file or a link from where i can get a working Manila or any other Touch 3D rom's .cab file that i can use for my Kaiser..Your help will be highly appreciated.
I found one working .cab file for Manila 2d but it doesn't work in landscape mode.
here u go
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
looking for a quick fix will almost always get you nowhere. Try clicking on the link titled "For all the people that want a cool phone" in my Sig and read the post.
Thanks !!
Thank you all for your response as it really was helping. I appreciate your views about the journey. Not just getting the meal served on table rather also to know how it is being prepared in the kitchen & what's it all about ! Will definitely keep up my research & will try to make most of it. Please keep helping & suggesting as it really helps. I know it's not sumthing that you're here for. But again if u spare some time for queries that u feel r considerable it'd be great. And yes i've gone thru the link : http://forum.xda-developers.com/showthread.php?t=465507 and tried to make it work on my Kaiser..But Touch-Flo 3d was not initiated even after flashing on screen again & again..I got the Second start up & Diamond Album work though..But didn't see Manila 3D working even i tried installing files in my device memory as specified serial order :
TF3D-QVGA
Opera
HTC AudioManager by Swtos
TF3D Standby
Touch Response
HTC-Diamond-Album
Manilla 3D landscape
Please help if anything needs to be done apart from these !!
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
It Worked
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
vicky_crispy said:
Hey I played with the files that were attached in the link mentioned in my previous rep..A little shuffle with them And i made Manila 3D work on my Kaiser..I installed HTC-CA-KAIS- 3D Drivers..Also instead of 3D Standby attached in the same link..I used Mortscript..QVGA Touch Power & TouchPower + TF3D Stanby cabs to get it working alongwith an advanced power menu thru the Power button..The only problem is that the phone has become really slow now. Also the Manila 3D's album feature is not detecting any albums neither looks like working properly. I will try to install Kaiser Tweaks as i read in a thread as my phone is freezing while a call comes !! Any suggestions are welcome..Cheers
Click to expand...
Click to collapse
Glad you got everything working, but obviously when you download a lot of crap that wasn't meant for your phone onto your phone,to make it look cool, it uses a lot of resources. While TF3D looks really cool and everyone here has done a great job porting it to our Kaisers, I still think that M2D gives you a lot more " bang for your buck " with fewer problems and fewer needed work a rounds.
RESULTS
Well i agree Denko that this feature is not meant for Kaisers by default. But by using certain means & making them work is what "Development" is all about. I understand there's a price for everything that we do. And after all d research & experiments that i did with my Kaiser..Its not the "Kewl" thing neither the 3D effect that is making me go crazy but its simpy the efforts & the result that i finally derived through them which again has inspired me that i can go ahead & experiment and maybe create new things too. And I can understand on thing for sure, that for a technology freak, There's no end to modifications & development as it's an on-going process.You've yourself been a part of same thing for a long time now i guess, But for me its sumthing i've stepped upon, So i'l take my time & maybe react too. Though you might find it too small to react & childish too, But datz d way it is. Thanks once again for your wise help & suggestions. Now next thing i'd wanna do to my Tilt is Flash a ROM in it..Maybe by next week. And that's sumthing i'm li'l scared of because i dnt wana cause harm to my device at d same time. And even after reading tutorial, M nt getting it worked as my phone gets disconnected from USB mode as soon as i start burning a ROM. Also i dnt really know how to get a HARD SPL 3.56 on my device. I tried that but it didn't work too. Is there some video tutorial that gives a sneek-peek into the action. Anyways i think m going too fast for that, And there's no hurry. So what are you working upon these days ?? And what do you do ?
Clarify & help please ???
kaiserII101 said:
Manila 2D does not work in Landscape. Also your ROM version is incorrect. You would know this if you read the whole post, and before flashing -G-'s ROM you need to flash Hard-SPL 3.29
Click to expand...
Click to collapse
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
<~THANK YOU~>
fiyaburnz said:
http://forum.xda-developers.com/showthread.php?t=465507 follow instructions after download and all should be fine, figured i do this b4 they hopped all over you telling you to search
Click to expand...
Click to collapse
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
vicky_crispy said:
Than'x for your reply. Though what do you mean my ROM version is incorrect ?? I bought this TyTN II GSM version from an HTC Store in august 2008. Still its ROM Version is not upto date ? Well if it isn't then what can i do to get it working. And please just dnt show me direction thru a finger, I might need a GPS as m really not fimiliar with your technical jargons, Be it while communicating with you all or in the thread that you refer people to go read to get their answers..I understand it to an extent..But not good enuff to get it working at one go. Plus i dnt wanna harm my device too
Click to expand...
Click to collapse
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
How to get -G- Rom ???
kaiserII101 said:
by your ROM version being incorrect i mean that you need -G-'s ROM. After you go through Hard-SPL just install TF3D. The HTC-CA drviers are cooked into his ROM and it makes TF3D a hell of a lot smoother and faster. So you don't need to install the drivers. Thats what was wrong in the first place is you didn't have the drivers which I see you installed in with a CAB but with them bring cooked in it makes it a lot better
Click to expand...
Click to collapse
Sir,
thank you for your suggestion. But as I've mentioned in my previous Replies, I am a rookie when it comes to Kaiser or ROM cooking & flashing. So i tried to flash some ROMS in my Kaiser but it failed. I mean my device is connected to my PC thru USB..And then i go thru those normal RUU file initiation screen too. But as it turns into 3 color screen & status shows "0%", It gets stuck right there & gets Disconnected from the USB connection !! And what about HARD SPL...How can i get it done to my Device..Specially with the configuration that i have on Kaiser. Because like i mentioned, I try to flash things through RUU..My phone gets disconnected frm USB ?? And wanted to resolve the query that DO our phones come with a HARD-SPL already ?? What is it actually & Hw can we check if its there on our device already or not ?? I tried by pressing both the "SOFTKEYS" at the same time..all that happened is that my phone screen got locked (Normal screen-lock)..I also tried pressing CAMERA & POWER buttons together for almost 30 seconds..Nothing happened Well these threads help me to an extent as i keep reading. But if there's some specific directions that i can get specific to my query. It might help..Or maybe if there's a Video-tutorial. Plus if you are getting what actually my problem is..I mean with the device..like if there are some specific files that i should use for it to get working..Please attach the links if you would. Because i did check the video of Touchflo 3D manila on Youtube & it was quick out there !! Also i installed some Kaiser tweaks (KaiserTweak-nikagl-20080613-1711) as i read in a thread installing tweaks make Kaiser speed up a lil bit when using Manila 3D..But the Touch-Incall-Screen-Tweal seems to give some trouble as the incoming call screen gets stuck..It did twice today morning. So i have un-installed those tweaks !! So if there's sumthing that you think might get my device a li'l boosted up along with Manila 3D..Please refer that too !! I'l try to flash a ROM once i receive your response about how & which version of HARD SPL will b fine for my Kaiser..And how can i get it on my device ??
Your reply will be awaited & appreciated.. Thanks in Advance
Flashing Your First Kaiser Rom (For Noobs)
click the link stylez posted, don't be embarrassed, I was there about 6 months ago
vicky_crispy said:
Than'x buddy..It did work..Though made me work it out from noon till night..But after few shuffles in the files mentioned in your link + Some that i did research & found from other threads..Manilla 3D is finally working in my Kaiser with everything fixed though my device has become a li'l slow that the time when i was using Manila 2D..Anyways i'l use it for a few days & if feel its affecting the speed to an extent where its bothering me i'l remove it !! Anyways than'x for ur help though..Cheers
Click to expand...
Click to collapse
no prob i used it and it worked fine for me i just switched back to 2d about 2 days ago and im already thinking about going back to 3d
installing M3D really makes my Kaiser slow. i installed M2D instead and installed M3D skin i dont have any problem w/ it right now
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Flashed GK.10.Final Rom
kaiserII101 said:
yeah but buddy here is the thing. The skin pales compared to the actual thing . And you probably didn't flash -G-'s ROM I bet?
Click to expand...
Click to collapse
Hey Senior..Than'x for all your support & guidance..I flashed Garmin's version 10 final rom on my Kaiser yesterday night..I had a li'l fear in my mind before i initiated HardSPL 3.29 & then Flashing GK.10.Final on my phone but all that happened very smooth & gave my device an all new look. Now what i am wondering is that how can i use Manila 3D or should i say 3D interface on my Kaiser. Or i must say you advice me what will look the best on my Kaiser. If you have any roms or suggestions upon what can i do post installing -G-'s rom on my kaiser..Or is it the complete package within itself..Please do advice me regarding this..I really would like to move on to the next level..Its really adventurous..Cheers to y'all !!
Regards,
Vicky
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
SUCCESS !!!
kaiserII101 said:
Everything you need for Manila3D should be in the ZIP file over at the TF3D thread. Be sure to read the Readme
Click to expand...
Click to collapse
Senior I used the TF3D files in the .rar file as you mentioned in the post yesterday night itself as the excitement was too high & it was too hard to stop..So i worked upon my Kaiser till the morning & uploaded TF3D Manila. To my wonder the Incall Tweak was not required this time as the phone didn't freeze on incoming call. Earlier it didn't use to display caller ID as it was left hidden begind Manila Interface..But not anymore. I also used some additional tabs like the Additional 3 tabs, Call Log, Calendar & Command manager tabs. I also installed S2U2 v 1.52 on my phone. And now TF3D Manila works on my Kaiser like the Nitrous in the car. Then i used Flash Format & formatted my 4Gig card as it got corrupted a li'l while back with the folders getting unaccessible with some strange signs & i was unable to format it using Pocket Mechanic. But finally everything is in place & working absolutely fine herre as i have installed some more programs using the other threads for Kaiser software..Will try & add some Pictures of Manila 3D running over Garmin's DK.10.Final ROM. Will cherish this ROM for sometime & then will try using something different & better on my Kaiser. You can advice what will be the next thing that i should do which will be fantastic for my Device !!
It would have never been possible without you guys who work hard on development part & bother to help rookies like us with queries too. Gr8 job
*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse
Hi guys, I just got my HTC pure a few days ago, and I'm trying to customize it. However I'm kinda a beginner at this, so I was hoping you guys would be kind enough help me with them. I have a series of question and any help is welcome.
1. How do I rotate the Manila screen? I had the TD2 tools install and it works on some programs. I think lyriquidperfection had already given the answer for this but I cant seem to find it. And if you're kind enough, please tell me how the programs work, coz there's no instruction anywhere.. BTW, the enable manila screen in the TD2 doesn't work and I have Manila 2.1.19183217.0 which the forum said should be able to rotate.
2. I cant get Manila to work with programs like S2P or Mircosoft Word, which is unusual since there programs support landscape view , any help with that?
3. I heard there a way for you to put shortcuts into Home tab, how do you do this? And can you change the background picture of other tabs other than just the home tab and the start menu?
4. At&T sent me a text said that I have to choose a data plan or they will choose one for me, which is a bummer. They changed the regulation in September and I didnt know anything about it. They should've sent mail to all customers about this. They didn't even tell me anything when I upgraded my phone until after the Sim card was activated. Anyway, is there a way to get out of this? if not, I read in the forum there a way for you to use your phone as a modern unnotice by AT&T, is this true?
5. Is there a way for the phone to rotate in more than the 2 default directions? When I check the G-sensor, it detects all directions.
6. The last one is flash ROM, there a ROM in this forum that the guys was able to make the Manila Screen Rotate sideway, and he got the music player rotates too. But I dont really like the look of the whole display. So my question is can I install a ROM and use only parts of it functions while left the others the way it is? And Do you think Flashing ROM is a better solution than using TD2 for G-sensor rotation?
Here a link to the ROM: forum.xda-developers.com/showthread.php?t=562942 (I cant post a link since I'm a new user)
Thank you in advance for all your helps!
3) Shortcuts in Manila home screen is a feature of Manila 2.5. You would have to flash to a ROM using this version. It is possible to have the same image in all tabs using one of two methods. Either with bg4alltabs or with HDWall. Search the forum to learn more.
I can't help much with your other questions as most are rotate based and i don't bother with that!
Thanks DirkGently1 for responding . I actually solved number 1, 2, and 5 which are all about rotation. I edited the registry of some programs and used G-config for the rest. Somehow it worked like a charm. For some reasons TD2 Tools didn't seem to work on my phone. For #6, it turned out I have to unlock my phone to be able to Flash ROM and I'm just happy with the way my phone is now so maybe in the future. Still #4, does anyone knows how to get out of the data plan?