Okay so whats next? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125...I did the hardSPL..and heres what I got...
Wizard Service Tool v4.2.2
18/02/09 02:08:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ----------
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df2f2 - 5.00M (0x4fec00)
6ea9d13a - 48.23M (0x303c000)
0fb25f92 - 50.95M (0x32f4000)
0fb25f3e - 2.94M (0x2f0000)
2fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000306901051024050918060635
Key Index: 84
All Done.
I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..do I have to upgrade to WB 6.1 first and if so...where do I get it (ive searched wiki and everything I could search here) or am I missing a step? Any help would be great, thanks!

impact12ed said:
I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125...I did the hardSPL..I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..
Click to expand...
Click to collapse
Not sure which file error you got, but you probably need the ROMUpdateUtility_Wizard_NoID.exe to get it to install.

error
impact12ed said:
I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125...I did the hardSPL..and heres what I got...
Wizard Service Tool v4.2.2
18/02/09 02:08:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ----------
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df2f2 - 5.00M (0x4fec00)
6ea9d13a - 48.23M (0x303c000)
0fb25f92 - 50.95M (0x32f4000)
0fb25f3e - 2.94M (0x2f0000)
2fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000306901051024050918060635
Key Index: 84
All Done.
I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..do I have to upgrade to WB 6.1 first and if so...where do I get it (ive searched wiki and everything I could search here) or am I missing a step? Any help would be great, thanks!
Click to expand...
Click to collapse
I think, it may because the RUU you are using is a little old perhaps? once, i was uploading a new ROM, but i had to take the nbf file from the ROM i wanted to a RUU folder (different folders)then i was able to flash/upload the new ROM

Related

Help i dont know what brand is my PDA

hi, i wanne know what brand is my pda for update, i checked this with Getdevicedata my result is it:
PH20B
0 B
ENG
G
11111111
0.99.00
0 0
0.99.111
0.91.00
91.00
my device look Blue Angel with Camara.
thank you
The info looks wrong, check the info that you get out of devce device info under settings-> system.
Device Information:
ROM version: 0.99.00 ENG
ROM date: 06/09/04
Radio version: 0.91.00
Protocol version: 1337.27
ExtROM version: 0.99.111 WWE
Hardware:
CPU: Intel (R) PXA263
Speed: 400 MHZ
RAM size: 128 MB
Flash size: 32 MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
LCD: 240 x 320 TFT
Color: 65536
Identity:
Model No.: PH20B
Platform: Pocket PC
IMEI: 35303000002xxxx
Not sure, but i think you should remove your IMEI number from this post.
Model No.: PH20B
Platform: Pocket PC
IMEI: 35303000002xxxx
you've got the slider keyboard then your phone is a xdalls (blueangel)
Well that is a unknow rom and radio version
PLEASE POST
Ce version found under About in settings.
joelmax18 said:
Device Information:
ROM version: 0.99.00 ENG
ROM date: 06/09/04
Radio version: 0.91.00
Protocol version: 1337.27
ExtROM version: 0.99.111 WWE
Hardware:
CPU: Intel (R) PXA263
Speed: 400 MHZ
RAM size: 128 MB
Flash size: 32 MB
Flash chip type: 28F128K3
Data bus: 32 bits
Storage size: 43.26 MB
LCD: 240 x 320 TFT
Color: 65536
Identity:
Model No.: PH20B
Platform: Pocket PC
IMEI: 35303000002xxxx
Click to expand...
Click to collapse
can i update this telephone?
what rom i need?
joelmax18 said:
can i update this telephone?
what rom i need?
Click to expand...
Click to collapse
Looks like the Qtek 9090!
QTEK 9090
yes... this is QTEK 9090 they also sale in Netherland
MDAIIIUser said:
Well that is a unknow rom and radio version
PLEASE POST
Ce version found under About in settings.
Click to expand...
Click to collapse
That's a Blue Angel, so you can flash it with another BA ROM.
But please first try what MDAIIIUser said first before you flash over this unknown ROM version, so not under 'Device Information', but under 'About'.
As far as i know it doesn't really matter what 'brand' the phone is. They are all the same (HTC Blue Angel) except for the logo's printed on them.
I have an Orange SPV M2000, but i've had the Imate and O2 Asia ROM on it and i'm currently using the latest Qtek ROM.
About:
Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 14132)
1996 - 2004 Microsoft Corporation.
All rights reserved.
This Computer program is protected by U.S. and International copyright laws.
Processor: Intel (R) PXA263
Memory: 125.77 MB
Expansion slot: In use
hey you can check your IMEI here
you can also see where your device is born at
http://www.numberingplans.com/index.php?goto=imei
IMEISV number analysis results
Manufacturer High
Model type Qtek 9090
Reference TW
Production date 08-11-2004
Phone version 0.1
Phone GSM phase GSM Phase 2 or higher
Country of handset approval
Official full name Republic of Finland
Short name FINLAND
ISO 3166-1-alpha-2 code FI
ISO 3166-1-alpha-3 code FIN
ISO 3166-1-numeric code 246
Time zone range (UTC) 2:00h UTC
Country / Destination flag
IMEISV number break-down
Type Approval / Allocation Code (TAC) 35xxxx
Final Assembly Code (FAC) 00
Serial Number (SNR) 00xxxx
Check Digit (CD) 5
Full IMEI presentation 353030-00-xxxxxx-x-xx
ok, when i tried the upgrade this happened error
Radio bootloader version error
please contact vender for helping
Read this guide. It should explain enough.
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Well the Ce software is old
http://wiki.xda-developers.com/index.php?pagename=BA_Versions
which means that the rom veraion 0.99 is not a leaked ver 5.0. (which is why I asked the question)
Upgrade should work based on info in wiki.
strange thing..
my BA is from imate but the website says its qtek9090
IMEI number analysis results
Manufacturer High
Model type Qtek 9090
Reference TW
Production date 08-11-2004
Phone version N/A
Phone GSM phase GSM Phase 2 or higher
Country of handset approval
Official full name Republic of Finland
Short name FINLAND
ISO 3166-1-alpha-2 code FI
ISO 3166-1-alpha-3 code FIN
ISO 3166-1-numeric code 246
Time zone range (UTC) 2:00h UTC
Country / Destination flag
hehe mine too, i guess that site isn't very accurate.
joelmax18 said:
hi, i wanne know what brand is my pda for update, i checked this with Getdevicedata my result is it:
PH20B
0 B
ENG
G
11111111
0.99.00
0 0
0.99.111
0.91.00
91.00
my device look Blue Angel with Camara.
thank you
Click to expand...
Click to collapse

Still problems with Data crashes error

I have followed the standard procedure to unlock the CID and SIM with the 1.05 button rom and lokiwiz02b.
I'm still running the 1.05 rom and I am stuck with the "data crashes...." error whenever I insert a sim card.
I red the instructions in the following thread:
http://forum.xda-developers.com/showthread.php?t=307558&highlight=data+crashes
With WST tools I found out that I had key index 48 so I used the file that is included in the thread to write back the CID block.
My problem is that I still get the "data crashes ..." error and my CID EMEI is now : FFFFFFFFFFFFFFF
What am I doing wrong? I thought my CID EMEI should be the same number as my EMEI at the label at the back of my device.
This is what WST gives when I read the CID block:
Reading CID block...
Calculating CID block sum...
CID checksum: CB3D5061
Decrypted stored sum: CBC0C8280DA8B6F6
Decrypted calcd sum: CBC0C8280DA8B6F6
Key index : 48 - Block index: 230
CIDkey: MODULESN
CID IMEI: FFFFFFFFFFFFFFF
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
You can close this thread, I was so stupid, I actually flashed the wrong CID file to my phone. It was 40 instead of 48. Now it works like a charm!!!
Wizard Service Tool v4.2.1
31/10/07 17:38:49
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356382007881016
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 1.06 (G3 device)
Built on Nov 1 2005 at 16:44:44
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.01.10
Protocol: 4.0.13.16
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8ea13db6 - 10.00M (0xa00000)
eeae8ece - 48.23M (0x303c000)
0fb2af36 - 51.06M (0x3310000)
2fb2ad76 - 2.88M (0x2e0000)
cfb2ad52 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000008535010715250dcf0e010641
Key Index: 98
All Done.

HELP!"data crashes.contact service center"

hallo.
got a spv m3000 with the following problems:
1. the camera doesn`t work.. it`s shows some sort of green and black horizontal stripes [with a sim in it or not]
2. it works ok without a sim as a pda, but when i put a sim in it.. it shows "data crashes.contact service center"
using the Wizard service tool 4.2.1 i checked and it was cid locked, besides the cid was key 88 and DOC chip unique ID was 66
i followed http://forum.xda-developers.com/showthread.php?t=285435 and installed button`s rom and changed the cid key into 66 using WST and the keys provided ..
AND IT STILL DOESN`T WORK [i did everything fine, a couple of times]
i`m now currently here:
Wizard Service Tool v4.2.1
31/03/08 22:16:27
CPU Manuf. FAILED
MODEL: Wizard
IMEI: 356381000075907
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
Getting more info...
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio values FAILED
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: visible
Getting drives,disks and partitions info...
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d622 - 1.87G (0x778e0400)
0fb891ee - 10.00M (0xa00000)
aea14ec6 - 10.00M (0xa00000)
ceae9ece - 48.23M (0x303c000)
cfb2bf36 - 51.06M (0x3310000)
afb2bd76 - 2.88M (0x2e0000)
0fb2bd52 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000a93802021223005c0a0905b8
Key Index: 66
All Done.
CID INFO:
Reading CID block...
Calculating CID block sum...
CID checksum: 2BB2824F
Decrypted stored sum: 626DAEC493E695B6
Decrypted calcd sum: 626DAEC493E695B6
Key index : 88 - Block index: 139
CIDkey: MODULESN
CID IMEI: 356382000275596
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
any ideas?
thanks
tintome
not it works..
yey..10x..
tintome said:
not it works..
yey..10x..
Click to expand...
Click to collapse
hmmm, what happened? Did you fix it or not?
Did the Data Crashes Project worked for you? If so leave feedback in its thread. tx

Nooby Help

Hello,
My apologies if this has been posted. I have searched and can't find the answer.
I have a Wiza200 which i am looking to upgrade the rom. I have use the lockwiz program to unlock'
I am now getting the following message when I select "CID Actions" from the Wizard service tool.
Decrypted stored sum:xxxxx
Decrypted calcd sum:xxxxx
Checksums did not match
could not determined a key index to decrypt it.
Your CID block must be corrupt or file isn't from a valid CID dump.
Aborting Operation
Any ideas wht this mean?
Much appreciated
Anybody out there help pls...desperateto upgrade to WMP 6
Details:
Wizard Service Tool v4.2.2
07/03/09 07:33:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 3563*********
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.0001 (G4 device)
Built on Mar 9 2006 at 13:52:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14847.2.0.0)
ROM: 2.21
Registry AKU: .2.0.0
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: 2.21.4.101
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
0e9e50aa - 9.99M (0x9fd800)
eea9f13a - 43.24M (0x2b3e000)
afb25f92 - 50.95M (0x32f4000)
efb25f3e - 2.94M (0x2f0000)
6fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000170e0101081700ac16050669
Key Index: 80
All Done.
read the wiki's, read again,
and search for G4, search again,
and find something like this:
http://forum.xda-developers.com/showthread.php?t=332320
or this:
http://forum.xda-developers.com/showthread.php?t=329147
or this:
"READ BEFORE POSTING: How to tell if you have a G4 or G3 device & how to CID-unlock it"
http://forum.xda-developers.com/showthread.php?t=284292

updater can´t detect ba

Hi all,
I bought T-mobile Mda III ph20b, but there is one problem: OS is german (2003se) I preffer english. So I went to this forum, readed chef tony´s guide and:
1. Installed Active sync 4.5 on pc with windows xp sp3
2. Removed sim
3. Putted BA in Bootloader mode, appears serial 2.05
4. Connected craddle with Ba to pc, USB appears
5. Killed wcesomm.exe (there was no wcsemgr.exe)
6. Launched Ma_Upgrade, after start screen he did not show rom version of my ba
Any suggestions?
Ave you put the rom files in the same dir of MA_Upgrade ?
Yes. I follow instructions exactly as they are. Installation folder keep files:
EnterBl.exe
GetDeviceData.exe
MaUpgradeUt_noID.exe
ms_.nbf
radio_.nbf
nk.nbf
RUU.conf
RUU.dll
Also I found log file in C:\
[msg] : Config Info : [000000],[0],[0].
[err] : Image Radio Checksum Error.
msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
Tryed without radio rom file:
[msg] : Config Info : [000000],[0],[0].
[msg] : RadioFile Not Exist !
[err] : Image MSystem Checksum Error.
[msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
Any suggestions? :/
Guys, I have just tried D-two's RUU and and 6.1 win mobile and it worked!
D-two, a lot of thanks! You are the best!

Categories

Resources