Is there any way to know IMEI code? - Tilt, TyTN II, MDA Vario III General

Hello,
Few days ago i bought HTC At&t Tilt/8925 in USA. Now i'm at home in europe and need to unLock it.
Also find in Ebay lots, where people who have access to some databases sell "UNLOCK Code For *At&t/Cingular* Tilt/8925", but they need IMEI code of phone at first.
So my question is how to find IMEI phone on locked phone?
As i know i must type "*#06#", but how can i do it, if the only sreen that i can view is
Network is locked, please input unlock code.
To make an emergency call, type the emeregency number and tap emergency
And field under that, where i must type unlock code?
Click to expand...
Click to collapse
So where i must type "*#06#"? in the that field and click ok? I'm afraid, that phone can understand that it's unlock code (and as i know i cann't type more than 5 wrong codes )
Any advice will be appreciated

remove the battery and it should be listed on the phone.

Or type *#06# in your phone dailer .

denco7 said:
Or type *#06# in your phone dailer .
Click to expand...
Click to collapse
i cann't type, as there is one field just for UNLOCK CODE.
Typing in this field will be understand, as UNLOCK CODE
remove the battery and it should be listed on the phone.
Click to expand...
Click to collapse
really
thx
there are 3 codes:
P/n
IMEI
S/N
Waw .. thanks ... so it's the right IMEI code?
Btw, need you advice , does unclocking phone with just codes (as on ebay) work really?
A check this guys have nice rating, but as you know sometimes, just ratings don't mean anything.
Once again, thank you ChumleyEX !

Normally you are able to get a code from at&t to unlock it so I would pay for anything. Also I think you can use a method from this site to unlock.
I'm not sure if you're able to call at&t, but if you can, just call them and tell them you are traveling over seas and you need to unlock it.

http://forum.xda-developers.com/showthread.php?t=361039
;-)

Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0

REMOVE YOUR SIM CARD!
That will stop the "Network Lock" Message from displaying.
Then you can get your IMEI from the Device Information Page or actually get into Windows Mobile and be able to use the Unlocker found here in the forums.

alexod said:
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
Is it mean, that at first i must downgrade it to 6.0, unlock and only after this upgrade to 6.1 ?

Exactly.
filler

Related

Unlock my kaiser :/

Hello,
I'm frenchy user but i have a Kaiser on the operator "Orange" (french)
I want to unlock this phone, I have found a .exe for this (kaiser-HardSPL.exe) and now this phone accept all Sim's card but it ask a "Unlock code" and i don't know what's this **** :x
Maybe it's with the IMEI of the portable, or the serial number ?
Can help me please ?
Thanks a lot !
hcks said:
Hello,
I'm frenchy user but i have a Kaiser on the operator "Orange" (french)
I want to unlock this phone, I have found a .exe for this (kaiser-HardSPL.exe) and now this phone accept all Sim's card but it ask a "Unlock code" and i don't know what's this **** :x
Maybe it's with the IMEI of the portable, or the serial number ?
Can help me please ?
Thanks a lot !
Click to expand...
Click to collapse
Please go here: http://forum.xda-developers.com/showthread.php?t=433835

unlock tool

why there is no unlock tool that work with the mda basic...all the other platforn have one, only these one doesn't..can somebody tell me a reason..the security protocol are bigger...and why for all the unlock codes u must pay...and for other devices are free?...don't take this in the bad why..i just what a info...i am saying this because i have search the entire internet for a unlock tool and i only gat the pay versions...
well i guess i didn't get ya clearly ... but if u looking for unlock tool so you can upgrade you rom (your windows) there is one in the forum in the section of development for viva ... think it will work ... if thats what you need
Ruch0 said:
why there is no unlock tool that work with the mda basic...all the other platforn have one, only these one doesn't..can somebody tell me a reason..the security protocol are bigger...and why for all the unlock codes u must pay...and for other devices are free?...don't take this in the bad why..i just what a info...i am saying this because i have search the entire internet for a unlock tool and i only gat the pay versions...
Click to expand...
Click to collapse
I think you are talking abt unlocking it for all networks. There cant be an app that unlocks your phone for dfferent carriers because each phone comes locked from the factory and to unlock, you require a code that matches the IMEI number, the unlock code for the matching IMEI number only exits with the manufacturing company.

where to put the unlock code on opal?

i have an mda basic locked on t-mobile austria, and i have the onlock code...but i don't know where to put the it...the standard mode is to put another sim carrier in it and when u start it u will be asked to put the unlock code...but when i put the sim carrier it didn't ask me for this...is there another way?
please, anybody, i wanna use my Mda in my contry but i can't because i don't know where to put the code....
Ruch0 said:
please, anybody, i wanna use my Mda in my contry but i can't because i don't know where to put the code....
Click to expand...
Click to collapse
Please provide screen shots so that we can get what you want to know...
i have the unlock code generated by the imei...and the normal way is to put another sim carrier in the phone and when u start it the first thing that shows up is the warning that tells u that u need to put a code in order to use the phone with that carrier...
i have the code but when i start it with the sim in it the device acts like its unlock but it doesn't received a signal...
is the another comand that will tell me to put the code in in oder to use the phone on all sim carriers?...i really don't know what fotos do u need...
Ruch0 said:
i have the code but when i start it with the sim in it the device acts like its unlock but it doesn't received a signal...
Click to expand...
Click to collapse
can you try to put the phone in airplane mode and then out of airplane mode. i hope the device will try to register on a network and ask for the unlock code again...
if nothing works, and since you have the unlock code, may try a local customer center.
please somebody has an opinion...i just wanna use my touch viva....i have the code but i don't have where to put it...

[Q] Enter Sim-Network Unlock pin -> already rooted,s-off and SuperCid

Hello, I would be really happy if you could help me soving this puzzle, really appreciate it!
I got my HTC ONE m7 back from repair and they changed the mainboard so that I got a new IMEI.
Now the phone is Locked to my previous provider A1 Telekom Austria (CID: VODAP120)
I got my phone, rooted, superSu, S-off and SupderCid, ARHD71, but cant get my phone sim unlocked?!
Message: Enter "SIM network unlock PIN" -> whenever I put my Sim-Card in (Drei/3 provider)
attached picture of my current phone status.
Im really out of ideas , hopefully someone of you can help me with this!
pstoll said:
Hello, I would be really happy if you could help me soving this puzzle, really appreciate it!
I got my HTC ONE m7 back from repair and they changed the mainboard so that I got a new IMEI.
Now the phone is Locked to my previous provider A1 Telekom Austria (CID: VODAP120)
I got my phone, rooted, superSu, S-off and SupderCid, ARHD71, but cant get my phone sim unlocked?!
Message: Enter "SIM network unlock PIN" -> whenever I put my Sim-Card in (Drei/3 provider)
attached picture of my current phone status.
Im really out of ideas , hopefully someone of you can help me with this!
Click to expand...
Click to collapse
you must purchase a sim-unlock code. S-OFF/supercid/root will not sim-unlock the phone.
you must be as close as possible to 100% stock to use the unlock code. Anyway try it, if id doesn't work then go back to stock and re-enter the unlock code.
alray said:
you must purchase a sim-unlock code. S-OFF/supercid/root will not sim-unlock the phone.
you must be as close as possible to 100% stock to use the unlock code. Anyway try it, if id doesn't work then go back to stock and re-enter the unlock code.
Click to expand...
Click to collapse
Thanks for trying to help me! The issue is, that there is no Unlock Code for this IMEI, I tried 5 differnt suppliers and noone could provide a code.
I guess the reason for that is the device is brand new...
pstoll said:
Thanks for trying to help me! The issue is, that there is no Unlock Code for this IMEI, I tried 5 differnt suppliers and noone could provide a code.
I guess the reason for that is the device is brand new...
Click to expand...
Click to collapse
in this case you could try the SIEEMPI method. The HTC ONE isn't listed on that page but many users reported that it works (in this thread)
alray said:
in this case you could try the SIEEMPI method. The HTC ONE isn't listed on that page but many users reported that it works (in this thread)
Click to expand...
Click to collapse
I tried that, but I get an error when hit SIMLOCK, see screenshot. Also, the Config.dat file isnt there afterwards, tried to push it via adb to /root but it says "Read Only File-System". Am I doing something wrong? Transferred the file via usb on SD-Card and then copied it via ES Explorer to the root folder. Any Clue? Thanks.
Thats the error message.
pstoll said:
Thats the error message.
Click to expand...
Click to collapse
the procedure is a bit different for the HTC One, you have to copy the .dat file to a fat32 hard drive connected to your phone with a usb Y-cable. take a look at the thread I have linked above, read the last few pages.
alray said:
the procedure is a bit different for the HTC One, you have to copy the .dat file to a fat32 hard drive connected to your phone with a usb Y-cable. take a look at the thread I have linked above, read the last few pages.
Click to expand...
Click to collapse
IT WORKED! Cheers mate. Thanks for giving me the hint with SIEEMPI method.

Error when i try to unlock my Moto x

Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
I have android system 4.4.4 stock.
Taling said:
Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
I have android system 4.4.4 stock.
Click to expand...
Click to collapse
I thought AT&T unlocked phones if you requested it due to that law that was put into effect for global capable phones?
I don't know how to do that process and I have another moto X from AT&T which I unlocked by buying the unlock code on a page.
very often its not working because custom ROM or custom baseband flashed, so please make sure that your phone is completely stock
its completely i updated by OTA to 4.4.4
First, you can try -> https://www.att.com/deviceunlock/?#/ it appears by the conditions that even NON-ATT customers can request the SIM/Carrier unlock code now.
Also, there was discussion about some SIM or Carrier Unlock codes not working on devices with a particular series of IMEI numbers... I don't know the specifics because I don't have an ATT X. See -> http://forum.xda-developers.com/moto-x/general/sim-unlock-moto-x-gens-t3011662 and start around Post #21 for more details, and more importantly post #31 of that thread for a possible resolution.
And be careful, I'm not sure how many attempts you get to enter the SIM/Carrier unlock code.
i try here https://www.att.com/deviceunlock/?#/ but dont work cuz said me: "Error: We found no record of the IMEI Number you entered. Check your device's 15-digit IMEI Number by dialing *#06# (errorCode.ULP2003)"
i bought another unlock code on ebay... i will try again
Taling said:
i try here https://www.att.com/deviceunlock/?#/ but dont work cuz said me: "Error: We found no record of the IMEI Number you entered. Check your device's 15-digit IMEI Number by dialing *#06# (errorCode.ULP2003)"
i bought another unlock code on ebay... i will try again
Click to expand...
Click to collapse
What are the first 5 digits of the IMEI? Is it 35321? If so, did you see -> http://forum.xda-developers.com/showpost.php?p=60680211&postcount=31
Yes, is 35321 but i have other Moto X start 35321 and i can unlock, but this one i cant do it....
Taling said:
Yes, is 35321 but i have other Moto X start 35321 and i can unlock, but this one i cant do it....
Click to expand...
Click to collapse
And that is why I pointed you to that post... it is another forum member explaining the exact situation you are having, and how he resolved it. (FOR FREE)
Its worth a try... if you would only take a few minutes to read the discussion, and that post.
Saythis said:
I thought AT&T unlocked phones if you requested it due to that law that was put into effect for global capable phones?
Click to expand...
Click to collapse
That's SIM unlock, not bootloader.
There's no official support from anyone on either side, AT&T or Motorola, for unlocking the bootloader on the XT1058. In fact if you call them and ask, they'll just tell you "no".
Furthermore, even senior developers for the platform like jcase have said that unlocking the bootloader on the XT1058 running KitKat 4.4.4 is more-or-less impossible (at the moment).
DarkWolffe said:
That's SIM unlock, not bootloader.
There's no official support from anyone on either side, AT&T or Motorola, for unlocking the bootloader on the XT1058. In fact if you call them and ask, they'll just tell you "no".
Furthermore, even senior developers for the platform like jcase have said that unlocking the bootloader on the XT1058 running KitKat 4.4.4 is more-or-less impossible (at the moment).
Click to expand...
Click to collapse
The OP was asking about SIM Unlocking (or carrier unlocking)... notice the BOLD/Italic I added to the following quote...
Taling said:
Hi. I have the Moto X xt1058 (AT&T) and I bought the code on 2 different pages. In one them they gave me 2 codes to try and when I tried to put the codes the phone showed an error to unlock the network and then in the other page they gave me the same 2 codes. I've reseted the phone and it keeps showing me the same error when I try to unlock it.
Click to expand...
Click to collapse
Yes i order another unlock code and all web page send me the sames code that i used :l
Taling said:
Yes i order another unlock code and all web page send me the sames code that i used :l
Click to expand...
Click to collapse
PLEASE READ -> http://forum.xda-developers.com/showpost.php?p=60680211&postcount=31 and follow what is described there (email to the address listed)... Make sure you ask for SIM Unlock aka Network Unlock... and don't just say "unlock"
Let us know how you make out.
i read that and i send a email to [email protected] and they said me cant help me :l
Taling said:
i read that and i send a email to [email protected] and they said me cant help me :l
Click to expand...
Click to collapse
Was your subject line ATTN: Donald Hicks - Global Leader Service Operations as stated in that post?
Did HE reply? or someone from Moto support? Did they explain why they can't help?
This:
Hello Starling,
Thank you for contacting Motorola. Unfortunately, as SIM issues are largely carrier-related, the spectrum of assistance we have to offer on the manufacturer's side of things is rather limited. When trying to use the subsidy unlock code to unlock your device, are you trying this with the new SIM card or the old one in your device? You should input the subsidy unlock code with the new SIM card if you have not already done so and try it again. If you have reset the device and you're still experiencing the issue, you will likely need to contact AT&T about this issue and they can look into things more fully on their end. The IMEI of your device shows as valid in our system, so if AT&T is having an issue with it, that would be on their end and you would also need to contact them about that. If you would be more comfortable with it, either a member of our tech support team or myself could reach out to you and make a conference call with AT&T to get this resolved for you as well.
Please let me know how you would like to proceed and I will assist you to the best of my ability.
Thank you for choosing Motorola and have a great day!
Cas
Motorola Mobility
Click to expand...
Click to collapse
Taling said:
This:
Click to expand...
Click to collapse
I would take them up on their offer in the final sentence of the first paragraph... To have a member of Moto support reach out to you and make a conference call with AT&T to get this resolved.
KidJoe said:
The OP was asking about SIM Unlocking (or carrier unlocking)... notice the BOLD/Italic I added to the following quote...
Click to expand...
Click to collapse
Whoops! Sorry about that, I guess my eyes skipped over that bit.
In that case, yeah! You should be able to grab it from AT&T's website or by calling in and asking about it.
I spoke with ATT and Motorola Agent and NOTHING.!
Motorola only help me to contact with ATT and they said me... "We cant help you with that, sorry"

Categories

Resources