Hi!
I want to be able to see and input Japanese in emails, calendar, address book etc etc... and am having some problems.
Yes, I have researched, read many pages, done all that, but I get some quite serious problems.
I have read
http://www.aximsite.com/boards/x50-x51-forums/103305-bagojs-japanese-ime-x50vs-wm5-16.html
http://forum.brighthand.com/showthread.php?t=171045
http://www.ookii.org/software/japaneseinput/
http://forum.brighthand.com/showthread.php?t=217045
and I know about ATOK for Pocket PC but have not tried their products as yet.
http://www.justsystems.com/jp/atok/atok_ppc/?w=at
First, I installed a Japanese font, soft reset, and then the input.
http://www.asukal.jp/WM5/LetsJapanNo5.zip
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
I checked to make sure the font is in the devices /windows/fonts directory and it is.
I then launched Word and I could type Hiragana but could not convert the Hiragana to Kanji.
I use Outlook 2007 on my PC, which is setup for Japanese.
However, on the Kaiser, I cannot get the Japanese to display in my address book and also the calendar. The standard rows of boxes show.
My PC is an English OS Windows XP, with Japanese installed and I have changed, in Control Panel -> Regional Settings and Language, for the default to be Japanese.
I also have tried BagoJSInput with little success.
The BIGGEST problem is that ALL of the Kaisers buttons, camera, jog dial etc, ( except for the poweron/off button ) completely become disabled!!
In the Kaiser's menu start --> settings --> buttons, all programmes are stilll associated correctly.
And the only way, I could get the buttons to function again, was to delete the Japanese applications !
Any advice appreciated!
Ofiaich
ofiaich,
Good idea starting this thread. It may help people in the future.
Okay, before we get too deep into messing with your device, you need some form of backup utility. I highly recommend SPB Backup, others will no doubt recommend Sprite. Both are totally worth the money, but there are serial numbers and cracks out there too, if you can live with yourself afterwards.
Also, please research to see if there is more than one way to soft reset the Kaiser. On the Hermes, there is a pin-hole stylus reset (brutal reset) and there is also the option of holding down the power button and allowing the machine to reset itself more kindly. If there are two ways, always use the hold-power-button option as it will allow the machine to shut down correctly instead of just cutting the electricity supply.
Next, it is also good to have some files to play with after you reset. So, BEFORE you hard reset, create a Word file with the PPC that includes some Japanese. Call this file PPCProducedJapanese, or something like that.
My first suggestion, after backing up that is, is to hard reset your device so that everything is back to the factory settings.
My next suggestion is to install these .cabs one by one to isolate the problem. Also, it might be a good idea to deal with each problem separately as it sounds like they have completely different causes.
Problem #1:
You can't see Japanese in contacts or calendar.
I still think this is caused by the sync from your English computer (even though it is Japanese enabled). The reason I think this is that I ran into the same problem a looooong time ago with an English-based PC OS and a Japanese PPC OS. However, the PC was a PentII with Windows ME and the PPC was a Ipaq 3850.
After a hard reset, install the Japanese fonts and sync with your PC. If you still cannot see Japanese in contacts of calendar, then try this:
On the PPC, sync over the file PPCProducedJapanese.
Copy and paste the Japanese in this file to create a new contact.
Copy and paste the Japanese in this file to create a new appointment.
If you can see the Japanese in these news files, then you know the problem lies somewhere between the PC and the PPC syncing files.
If you can't see the Japanese in these new files, then you know the problem is that the Japanese fonts not being registered by these programs for some reason.
There are two Japanese fonts packages that I am aware of: Asukal's Let'sJapan and the one at Ookii.org. Try one, then repeat the above process with the other and see if the results are the same.
Problem #2
The Japanese input .cab totally screws up your device causing all buttons to be come unresponsive.
Hmmmm... This is a bit more problematic. The Japanese input .cab makes a lot of changes to your system, but almost none involving buttons that I know about. The only thing I can think of is that the .cab is changing your hardware keyboard layout, and that in turn is confusing your system.
To rule out this possibility, try the following:
After a hard reset, use a registry editor to view the following registry value:
[HKEY LOCAL MACHINE/Software/Oem/Querty] Write down the value and note if it is decimal, hexidecimal or binary.
Then, install the Japanese font package of your choice.
Soft reset.
Then, install the Japanese input .cab.
Soft reset.
Check your buttons to make sure they don't work. If they don't,
use a registry editor to view the following registry value:
[HKEY LOCAL MACHINE/Software/Oem/Querty]
Compare the value you wrote down before with the current value. If it has changed, use the registry editor to return it to the previous value.
Soft reset.
Check your buttons again.
If this is ineffective, or if the registry values were the same, try installing the attached .cab. I found it on Asukal's site and it says it is the patch for non-HTC machines. Of course, the Kaiser is an HTC machine, but it can't hurt to try. Install and soft reset and see if that fixes your problem.
You might try this with BagoJSInput as well but be careful:
DO NOT INSTALL BOTH ASUKAL'S AND BAGOJSINPUT TOGETHER!
Problem #3:
You cannot change the hiragana to kanji using Japanese input.
This is even more strange. Just a couple things I want you to check for me.
1) Are you using the correct sip (soft input panel)? Do NOT use the SIP called "keyboard". Use the one called Romaji. You should have access to hiragana, katakana, english along the left, as well as to a "henkan" button that will allow you to change hiragana to kanji. The henkan button is the one on the bottom right and is marked 変換.
2) What if you try hand writing a kanji in the kensaku sip? Does it appear for you?
Hi larsuck!
Thanks for your long and detailed post.
I am not so inclined to start doing registry edits, u til I know my device more. This is my first Windows Mobile Device.
I did try to install the synch software for TyTn II to my small Japanese OS, Sony VAIO, but got all messed up with 'can't synch with 2 PC's' messages.
Strangely, even though WiFi on the Tytn II was switched off, the VAIO picked up the signal!!
I did have a partial success with the input method shown here
http://www.ookii.org/software/japaneseinput/
but the user needs to know the Kanji well, and get the stroke order fairly accurate.
I could also input in English and Japanese to the dictionary shown here
http://www.ookii.org/software/pocketdictionary/
This input method worked in Word, but there was the need to remember to go to the word menu, and change the font settings to a Japanese font.
I previously installed some Word documents, created on my PC, to the card, and this dispaly fine.
Unfortunately I cannot find any way to change the font in Calendar, or Contacts.
I also sent myself an email, in Japanese, and the text was intelligible characters.
I wish Micorsoft would design a simple input method, I have one for my old Palm that works a dream !!
Ofiaich
ofiaich,
I understand about the registry edits, they can be scary at first.
Did you try to create a new contact and appointment on the ppc using Japanese (whatever input method is fine)? Does it display boxes or does it display correctly?
Hi larsuck,
Yes, bit too scary for the moment, but I will learn about it.
I did try to make a new contact and a new appointment, but the input just showed boxes.
Input worked for Word, and also for the dictionary. For word, I had to make sure that I changed the font from Tahoma to a Japanese one.
If there was a way to change the contacts and calendar font, then I think I could input Japanese there!
edit - I did change my synchronisation options to include email from PC Outlook 2007, and synching with the PC and NOT the Exchange Server.
Again, I could see Japanese in the email, on the TyTn II, but there was no options in the Pocket Outlook menu, to change the font, thus allowing input.
edit 2 - I sent myself an email in Japanese to myself, Microsfot Exchange Server, and then accessed my home WiFi connection and used Pocket Explorer, to go to the web page owa.my-server.com but the Japanese email was not displayed correctly. I have not tried Hotmail, but guess it will be the same. My Hotmail is a .co.jp address.
I have not worked out how to access the exchange server as yet, via synchronisation. I get an error message, but I will post that problem separately.
Ofiaich
Silly question, but did you check your Kaisers Regional Settings to make sure they are Japanese? (The Asukal cab should have changed it, but maybe not.) If you haven't checked it, they are under Settings>System Tab>Regional Settings.
Hi !
I am sure the regional settings were Japanese. I have removed that cab, and am using the www.ookii.org one...
In the regional settings now, Japanese does not exist...
Do you want me to remove the ookii cab, and re-install the Asukal cab ?
I just removed the Ookii and switched off then on, and installed,
IME_31J-QVGA_F cab ( ASK_IME_31J) ----- The Kaiser buttons, except for power on/off, do not work at all.
Regional settings do not have Japanese. Italian and Latvian !
I then did the same with BagojsINPUT CAB ... The Kaiser buttons, except for power on/off, do not work at all.
Regional Settings do not have Japanese either !!! ( But I am really sure that my Kaiser did show Japanese in the Regional Settings before.. )
Frustrating to say the least....................
Ofiaich
Let's stick to your Japanese font problem in Outlook and Inbox first. Once we fix that, we can worry about the input. So, uninstall all the Japanese input for the time being. (Or, better yet, do a hard reset if you can.)
Okay, do you still have Asukal's Let'sJapan installed?
That is the file with the fonts. It should also make available Japanese regional settings. (Don't worry, it will also still have Latvian settings. )
If you still have it installed (or after reinstalling it) and the Japanese Regional Settings are STILL not there, then use File Explorer to check the contents of your Temp folder (in My Device). There should be a file called wince.
There is also a file called wince in your Windows folder (lets call this the "original wince" and the one in the Temp file the "new wince".) What we want to try to do is to replace the original wince in your Windows folder with the new wince in your Temp folder.
The problem is that wince in your Windows folder is a system file, so you can't use File Explorer to make changes to it. You need a program that can do that - there is such a program called GSFinder+ It is freeware. Download and install it.
**At this point, I would like to once again stress the importance of backing up any necessary personal information, and/or backing up your machine completely using SPB Backup or Sprite**
Now, first we want to copy and save the original wince that is in your Windows folder. Please save a copy of this file on your PC. Just in case.
Now, use GSFinder+ and copy the new wince file. Paste it in your Windows folder. There should be a dialogue saying something like "Do you want to overwrite this file... with this file...?" Take a deep breath and hit okay (or yes, or whatever the affirmative button is labled).
Wait until the overwrite finishes, exit GSFinder+ and soft reset your Kaiser. Now check to see if you have a Japanese Regional setting available.
If so, select it (or make sure it is selected) and see if you can see Japanese in your inbox or calendar.
Good luck. And remember - no matter how bad you may mess up your machine, you can always restore it to the factory settings by doing a hard reset. So as long as you back up any mission-critical information you might have stored on your ppc, then you have nothing to lose by messing around.
Hi larsuck,
Well,,,,, I am bemused !! I installed Resco Explorer 2007 today, and was thnking about the whole process, hard reset, copy wince over to the windows directory. etc etc
After installing Resco Explorer, I did a soft reset . I then glanced down at my Kaiser...and Japanese is displayed in the calendar and contacts...
Days of the week are in Japanese too so I knew and have checked that the Regional Settings are for Japan, they are.
I have Asukals Lets Japn No. 5 installed.. but no input method
and also The Kaiser buttons, except for power on/off, do not work at all! Therefore, calls cannot be received etc using those buttons !
and keyboard does not work!
I know you have posted above
Ofiaich
Hi larsuck
larsuck said:
Problem #2
The Japanese input .cab totally screws up your device causing all buttons to be come unresponsive.
Hmmmm... This is a bit more problematic. The Japanese input .cab makes a lot of changes to your system, but almost none involving buttons that I know about. The only thing I can think of is that the .cab is changing your hardware keyboard layout, and that in turn is confusing your system.
To rule out this possibility, try the following:
After a hard reset, use a registry editor to view the following registry value:
[HKEY LOCAL MACHINE/Software/Oem/Querty] Write down the value and note if it is decimal, hexidecimal or binary.
Then, install the Japanese font package of your choice.
Soft reset.
Then, install the Japanese input .cab.
Soft reset.
Check your buttons to make sure they don't work. If they don't,
use a registry editor to view the following registry value:
[HKEY LOCAL MACHINE/Software/Oem/Querty]
Compare the value you wrote down before with the current value. If it has changed, use the registry editor to return it to the previous value.
Soft reset.
Check your buttons again.
If this is ineffective, or if the registry values were the same, try installing the attached .cab. I found it on Asukal's site and it says it is the patch for non-HTC machines. Of course, the Kaiser is an HTC machine, but it can't hurt to try. Install and soft reset and see if that fixes your problem.
You might try this with BagoJSInput as well but be careful:
DO NOT INSTALL BOTH ASUKAL'S AND BAGOJSINPUT TOGETHER!
Click to expand...
Click to collapse
Hi! Interesting I cannot find this path -
[HKEY LOCAL MACHINE/Software/Oem/Querty]
I have got as far as HKEY LOCAL MACHINE/Software/Oem/
then the options are -
Buttonsetting
Cab
InvokeSIMMgr
MASD
Phoesetting
RIL
SIMMGR
STK
TFLOSettings
UMTS
USB
VoiceCommand
WModem
Frustrating to get the Japanese to be seen, but can only use the stylus !
I am going to install an input system, and checkout Kanji conversion.
edit - I got input working... but not Kanji conversion. I could enter Kanji with stroke recognition ! But of course, need to know the strokes !
An interesting thought The buttons and keyboard stop working after Asukals Lets Japn No. 5 was installed.
Can I use a Windows Japanese font from my PC instead of Asukal's files?
Ofiaich
Hi!
final update from me !
in the 'file mamanger' Japanese in song titles are not consistently displayed. i.e some are some are not..... and when I play a Japanese song in media player, the Japanese is not displayed.
One last problem, when I unistalled Asukals Lets Japan No. 5, and did a soft reset, I was unable to use the English text application. The 'enter a number' and 'message' fields had gone. I guess because wince had been deleted by the unistalling of Asukals Lets Japn No. 5.
When I re-installed, I could use the sms application again, but no buttons, keyboard operation.
I get a strong feeling that it is a problem with Asukals Lets Japan No. 5.
I did try the enable_ime2.zip file that you attached, but with no effect.
The Japanese looks really good in calendar and contacts, so I hope a solution can be found...
Ofiaich
Hi!
found this thread with a similar problem.
This is the important part
" My phone is a Samsung SCH-i730
-- Note to everyone reading this-
-- Uninstall of Asukal Lets Japan and it is fine
--- HKCU --> keyboard layout --> Preload & Preload\1: default is "E0010409"
-- Install of Asukal Lets Japan, buttons don't work
--- HKCU --> keyboard layout --> Preload & Preload\1: default is "E0010411"
If you edit the keyboard layout registry value above to the previous one it works. For me, it was E0010409. My suggestion is to uninstal Lets Japan, check the registry value, install Lets Japan, and then change the new value back to the previous one. "
My problem is when type in "E0010409" I appear to get the letter O instead of an 0
you can see the difference! So this has not solved it for me, but I WONDER if it is an inputting the number.... correctly issue !
Ofiaich
ofiaich said:
final update from me !
Ofiaich
Click to expand...
Click to collapse
Don't give up! I think you are close to finding an answer here.
ofiaich said:
I get a strong feeling that it is a problem with Asukals Lets Japan No. 5.
Ofiaich
Click to expand...
Click to collapse
Me too. After seeing that your registry had no [HKEY LOCAL MACHINE/Software/Oem/Querty] string I started to get very worried that Let'sJapan wouldn't work with this device. AFAIK, Let'sJapan is only fonts and regional settings, but if it is messing with your Kaiser, then perhaps it has some more stuff hidden in it.
ofiaich said:
My problem is when type in "E0010409" I appear to get the letter O instead of an 0
Ofiaich
Click to expand...
Click to collapse
When you input into the registry, are you using the "keyboard" sip or the "romaji" sip? It sounds like you are inputting full-size block letters instead of half-size block letters. (Full-size block letters will appear wider than normal.) Check your "romaji" sip for a button labled 半角 (hankaku). It should be selected, making it black. This will give you normal half-sized letters. It should allow you edit the registry.
Or, you could try a remote registry editor. It uses your computer to alter your Kaiser's registry when docked. http://www.freewarepocketpc.net/get-ceregeditor-v0-0-3-0.html
If these registry entries don't work, then I think you are right to just forget about Let'sJapan and look for other font packages like the one on ookii.org.
Hi!
I did edit using the romaji input before, but tried again, but still no luck.
The remote editor connects, I can see the entries, change them but then I get "access denied" and can't proceed any further.
I wish I could contact the original author of lets Japan.... but I get no replies from pm's etc on other forums such as Brighthand !
the system from ookii.org never displayed Japanese on Calendar and Contacts..
Edit - I removed both the font and the input, and reset, and now all of the fields in the text messaging have gone!
Time for a Master reset ... and then set it up as an English device...
Thanks, larsuck, for all your help............ I will try ATOK in November, a Japanese friend who is a system engineer on Windows OS, will come back here... and he will help me. The ATOK page here is a bit too difficult for me to understand.
Ofiaich
Well, its a bummer it never worked out. I certainly understand you getting tired of trying - it is a phone afterall.
I'll keep this thread bookmarked if you, or anyone else, wants to try again. Good luck with ATOK.
Hi larsuck!
Yes, so near but not so good to lose the use of the camera button, keyboard etc...
Interesting, I have placed some PC - Windows Japanese fonts into my Kaisers font directory, and using the software from ookii.org, I can input in Japanese into Pocket Word ( need to change from Tahoma font to a Japanese one )
and also input into the Japanese dictionary in English and Japanese.
I wish I knew how to make this font work with Calendar and Contacts !
There must be a way to change the default font for these applications...
Ofiaich
Yea!!
Asukal replied to my pm and advised me like this
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
“Keyboard Layout”=”00000409″
and hope hardkey will be used.
Good luck
The butttons and camera now work !!
Now to try, one by one, an input system!
Thanks soooo much to larsuck and Asukal for their support !
本当にどうもありがとうございます！ 嬉しい！！！
Ofiaich
seems like it's more difficult to display Janpanses than Chinese...
ofiaich said:
Yea!!
Asukal replied to my pm and advised me like this
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010411]
“Keyboard Layout”=”00000409″
and hope hardkey will be used.
Good luck
The butttons and camera now work !!
Now to try, one by one, an input system!
Thanks soooo much to larsuck and Asukal for their support !
本当にどうもありがとうございます！ 嬉しい！！！
Ofiaich
Click to expand...
Click to collapse
I'm glad to see you got this working. I'm using a CHT9000 (TyTN One) right now, and am getting a TyTN II in 2 weeks when I visit Taiwan. I'll be sticking English WinMo6, but will need Japanese input and fonts.
The CAB from ookii doesn't include fonts or anything, so you do need Asukal's Let's Japan to make it all work. That is the combo I use on my CHT9000 (Asukal+ookii)
Hi chenga!
Yes, I used Asukal's lets Japan, and also now IME_31J_QVGA_31J and I am very happy....
Remember Asukals advice should your hard keys, jog dial, and hard keyboard stop working!
EDIT.... did a hard reset this weekend and, installed everything, and checked if MSN Messenger worked after each installation.
Then did a back-up.
After that, installed Japanese support and now MSN Messenger does not work.
It's a pity... I can't think of why....
Ofiaich
Ok - I admit it - I am indeed seemingly the only person in the world who doesn't regularly view YouTube!
Therefore I'd like to remove it from my Favourites list on the Internet tab of TF3D.. although from what I can see this one is hardcoded (and not an Opera Favourite, indeed this link actually opens up the YouTube client and no Opera).
However.. while on the subject.. has anyone figured out how to control the ordering that these Favourites are displayed on the TF3D tab? From what I can make out, while within Opera they are alphabetic, in TF3D they are listed in the order they were created.
All ideas/suggestions welcomed! Thanks.
youtube...
No, you're not the only person. I don't watch youtube too. I'd like to remove it complete from the device. Any chance?
Well.. I've removed the whole internet tab from TF3D altogether (using TF3D config).
It's nothing but a globe and some links.. which I can also get from the programs tab. Ya might wanna try removing this whole tab and adding the opera link into your programs tab instead
I do not use it 2
I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.
By Christ. Removing the internet tab just to get rid of a bookmark is a bit bloody over the top!
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!
@Mods: perhaps someone could merge all these threads as they are all about the same topic:
http://forum.xda-developers.com/showthread.php?t=408035
http://forum.xda-developers.com/showthread.php?t=408641
The solution posted above and in the other threads seems only to work for the MDA compact IV but not for the Diamond. Does anybody know how to change the internet tab on the Diamond?
Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')
Patrickw_mdav said:
I also had a problem with the internet tab. In my case (MDA compact IV) the opera favorites weren't displayed on the tab.
I've been searching the diamond and found some xml files in the following directory:
\Application Data\manila
There are several xml-files, choose the one for your own language-country combination. This file determines the contents of the internet tab.
1) Make a backup of the xml-file
2) Clear the read-only and the system flags of the xml-file.
3) Make the necessary changes.
4) Save and you are ready.
To remove the you-tube link, You'll have to delete the <link .... > entry from the <OperatorLinks> section.
P.S.
While you're there, you can also remove the <banner > field to get rid of the logo, and remove/change/add OperatorLinks ( e.g. the Search link), and detrmine wether you want to display the opera favorites.
Click to expand...
Click to collapse
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?
Any more ideas?
Begin to hate youtube
rhedgehog said:
Just delete the bookmarks you don't want from opera and they disappear.
How hard do you really need to make it??
Sheesh!!!
I realise that t-mobile and the other networks may have screwed with the touchflo to bugger it up, but if you have an HTC branded one then just edit the opera bookmarks!!
Click to expand...
Click to collapse
Hey retard, why don't you shut up and go back to kindergarten! He can't DO THAT. It is NOT an Opera bookmark and you can't just delete it. If it was he would have done that - don't assume everybody is as stupid as you.
XDA II said:
Did anybody notice that this doesn't work anymore with the new 1.93 HTC Rom?
Any new trick to remove the youtube link?
Click to expand...
Click to collapse
I just deleted the entire OperatorLinks section and that worked fine.
Kermode said:
I just deleted the entire OperatorLinks section and that worked fine.
Click to expand...
Click to collapse
It's not working here. I removed the also the whole OperatorLinks section and you tube still there. I've tried to remove the read only flag and the system flag of the file. Try to softreset and deactivating touchflo3d before changing the file. Nothing works for me. Also i've searching the whole windows directory for other occurencies of the text 'you tube' and found nothing related. Additionaly I tried to changed the text 'you tube' in the OperatorLinks section, but the text didn't changed in the touchflo3d after restarting.
I'm using 1.93.
I, too, am interest in this! I'm sure there has to be a registry entry to remove it. Oh registry wizards?! Where art thou???
This variant worked on Touch diamond 1.93.
I thought I was the only one that didn't see youtube as the meaning of life and the Internet. It appears that we are at least a handful.
I did something VERY similar to the above and it worked (first shot) on a TD with 1.93.
But since the above didn't work for all, I better describe EXACTLY what I did:
1) By activesync copied the XML-file to PC
2) Removed RO-fileattribute
3) Opened it with notepad
4) Renamed the <Banner to <BBanner
5) Renamed (both halfs) of <OperatorLinks> to <OOperatorLinks>
6) Saved the file
7) Copied it back to another dir on th TD
8) Removed RO on original
9) Used TotalCommander to copy my changed file over the running.
10) Pressed the red reset-button
And look and behold. After boot It worked. The globe also went.
I noticed that the .qtc files mentioned in the .xml doesn't exist at the location given. e.g.
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"Nor anywhere else?
Actually the whole structure
"\Windows\HTC\doesn't exist!
Nor is there anywhere a directory or registry entry "InterNetPortal" nor "Assets"!! So this is all very strange...
But the interesting thing is that the widget now only shows my favorites.
Hope it works for others as well.
I must emphasize that I didn't try the original method, so that might also have done the trick.
After change, the file looks like this
<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<IncludeUserFavorites>True</IncludeUserFavorites>
<BBanner
DefaultImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner.qtc"
SelectedImagePath="\Windows\HTC\Assets\Images\InternetPortal\banner_selected.qtc"
Text="Start webbrowser"
Width="480"
Height="215" /> <OOperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPortal\youtube.qtc" /> </OOperatorLinks></InternetPortal>
----
After some more testing, I found out that the very odd values for "DefaultImagePath" and "SelectedImagePath" are MAGIC words! They could be replaced with 'any' picture-file. If the path or filename is invalid/nonexistent the picture is omitted. If these two magic values are used the standard globe will be used. The picture is scalable by height/width
Order of Opera favorites on widget, opera6.adr format
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank
The second dummy-link
About:blankis useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.
eske.rahn said:
The favorites are shown on the widget in the order they appear in opera6.adr.
Opera6.adr is a rather plain text-file. But please note that by default the unix-style <LF>-only is used as line separator.
So if possible avoid editing with windows notepad, or change the <LF>'s
In vista-notepad <LF>'s are treated as zero-width blanks(!!), so it's VERY easy to get confused and mess things up. I wasted a lot of time, thinking it was a proprietary format, before I discovered the <LF>'s...
Opera Hotlist version 2.0
Options: encoding = utf8, version=3
#URL
ID==12
NAME==Google
CREATED==1223404383
URL==http://google.co.uk#URL
ID==13
NAME==About:blank
CREATED==1223404383
URL==about:blank
The second dummy-link
About:blankis useful when the globe is removed from the widget, just to open the browser. I recommend it as link number FIVE, to get it as the lowest of the five shown on the widget without swiping.
Click to expand...
Click to collapse
How did you edit it finally?
Vista WordPad?
EDIT:
I stopped touchflo, removed read only and system checkmarks on the file. Copied it over to the PC. Used Vista wordpad to open it. Edited it and when finished clicked save. Copied the new file over to the phone, replacing the one there. Started up touchflo and it worked!
FuzzyLogic_FC said:
How did you edit it finally?
Click to expand...
Click to collapse
Well when I discovered the LF's it was easy. Just replaced LF with CRLF, this can be done in many editors.
Timbermill said:
Many thanks to all - I'd given up hope after my first ask
It's nice to be able to add icons for the operator links (only 62x62 tho')
Click to expand...
Click to collapse
How'd you manage to add icons for the operator links and are they limited to 62x62 simply due to the available space? Can icons be added for the favorites too?
"thank you for pasting the original xml file" helped me in restoring the default globe and removing telstra wap links especially the bigpond image!
OK, so it seems that just about every time i want to uninstall/upgrade a program on my tilt (not cracked, only bypassed the att crapification...er, customization).
what happens is, certain programs (most recently cetwit) will not fully uninstall when i goto remove them from remove programs. it says this and asks if i wish to remove the program from the list of installed programs, and i usually say yes. that program is still listed when i goto start/programs, and the program files are still safe and secure in the program files folder through file explorer.
the worst part is, when i try to reinstall/install an updated version, it shows two icons in my programs list, which is very frustrating...enough so that it causes me to hard reset and reinstall everything over again. i've run registry and junk file cleaners to no avail.
is there any way to COMPLETELY remove a program in this situation, or am i required to hard reset each time it happens?
maybe here i will also ask for a good registry cleaner that knows what to kill and what to leave...
sktools wiped out some important things, had to hard reset and start over because even my backup app couldnt fully recover.
Get a file explorer, delete the program's folder in Program files, delete the shortcut in the start menu and most of it is done. You can then use a reg cleaner to remove the last remains in the registry.
That has happened to me with a couple of programs, I'd blame the programs rather than WM.
I have a similar issue. I've removed the program folders, shortcuts, registry entries, etc. but the programs still appear in the remove programs list under settings / system. Although it's not causing me any problems per se it is really annoying. If anyone knows how to fix it I'd love to know.
on pc's the list in add/remove
is
located in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
would asume that they are stored in reg on pda's too
I've had that happen a few times also, what usually fixed it besides manually deleting the folders and shortcuts, is to remove it in add/remove programs in activesync. Just check the box that says to delete from handheld and desktop.
I've tried that - using AS to remove the applications - but it still doesn't work. They all show up with a size of 0.0K but removing the tick in the box and selecting the remove from both device and computer option does nothing - they still show up in the list on both devices.
hi,
i'm using Energy Rom (6.5 cookie, 1jul). I use Manila for few pages (home, email, calendar, music, messages, settings, album), and because i like a lot Cookie Home.
I don't use a lot of manila pages (footprint, stock, meteo, facebook, reader, twitter, etc etc).
I disabled all pages i don't use, but memory usage does not change, because if i disable some manila pages, they are only "hidden", but are not really disabled (releasing memory).
(ex: i disabled meteo, but meteo is still updated in calendar page)
I ask: is possible, setting registry or files, disable REALLY some manila pages, in order to release memory?
Thanks
try this registry settings:
HKEY_CURRENT_USER\Software\HTC\Manila
"Manila://weather.page.hidden"=dword:1
"Manila://facebook.page.hidden"=dword:1
"Manila://footprints.page.hidden"=dword:1
"Manila://docexplorer.page.hidden"=dword:1
etc...
if you just unchecked this TABs in settings, reg keys only change to dword:2 (= selectable)
Wajk said:
try this registry settings:
HKEY_CURRENT_USER\Software\HTC\Manila
"Manila://weather.page.hidden"=dword:1
"Manila://facebook.page.hidden"=dword:1
"Manila://footprints.page.hidden"=dword:1
"Manila://docexplorer.page.hidden"=dword:1
etc...
if you just unchecked this TABs in settings, reg keys only change to dword:2 (= selectable)
Click to expand...
Click to collapse
thanks for your kind reply.
but problem is not fixed :-(
i change registry, as you suggest, but after soft reset, values change to "3" (i set to "1"): pages are hidden, not visible in configuration, but memory allocation is the same... so it seems that pages are hidden but not really disabled....
other ideas?
bye
this is a long shot and i dont know if it will work but you can try it
intal total commander on youre phone and search for the file 26948339_manila
copy the file 2 times(1 for backup of the file so you dont need to hard reset)
transfer one to youre computer and check if the read only is disabled
then open it with notepad and get the tabs you dont want out of the file
save the file and copy it back where you got it from
restart youre phone and the services shouldnt have to start as they aint part of sense anymore
as i said its a long shot and i dont know i it will work but you could try
miniterror said:
this is a long shot and i dont know if it will work but you can try it
intal total commander on youre phone and search for the file 26948339_manila
copy the file 2 times(1 for backup of the file so you dont need to hard reset)
transfer one to youre computer and check if the read only is disabled
then open it with notepad and get the tabs you dont want out of the file
save the file and copy it back where you got it from
restart youre phone and the services shouldnt have to start as they aint part of sense anymore
as i said ts a long shot and i dont know i it will work but you could try
Click to expand...
Click to collapse
thanks for answer. i tried also this solution but nothing changed: free ram remains the same (low... 80-82m after boot, 60m after some usage).
anyone other ideas?
thanks