Related
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Hi,
I haven't had the problems you have, not even heat yet as has been discussed. Perhaps it's because I am not taxing the unit yet.
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
When I open the Windows Mobile Device Center the Connection Settings window opens up with the Allow USB & Bluetooth Connections radio buttons. When I hit OK with both Radio buttons selected (USB & Bluetooth), that's it, the window closes and there's no Windows Mobile Device Center that opens up. Task Manager shows no open Windows Mobile Device Center application but does show a Windows Mobile Device Center process, wmdcBase.exe.
What am I missing here? Please help, 4 days & I still do not have my Contacts in this phone.
This is a duplicate post from lower down.
Cheers,
Phil
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
1) this happens but only with the D-Pad sometimes. This also happend on the TyTN
2)haven't had that problem
3)Screen goes dim but if I touch the screen it comes back on
4) haven't had that problem
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
regarding the screen dimming, I assume this is with the HTC ROM.
My phone has been fine with the latest two AT&T ROMs (the first ROM had this prob, the screen would dim after 10 seconds). You can temporarily fix the problem by resetting the Backlight timeout Settings.. Backlight... Battery Power tab) to something like 1 minute. It will keep getting reset every once in a while though... You can also turn off the backlight timeout completely (unchecking the box), which seems to work longer.
BTW it seems to be a problem with the HTC Home plugin. When I installed the original AT&T ROM but didn't install the HTC Home today plugin, the problem did not happen.
I have seen the D-Pad problem in Outlook only - that is, hang up a call, then d-pad doesn't work to navigate thru email. Once email is open the D-Pad works... Solution is to kill (click x button) Outlook.
M
Screendim
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
Click to expand...
Click to collapse
Same here, screen dims and startmenu does not work. Issue is I can't deactivate pw (corp security pollicy for pushmail client).
Could someone elaborate a bit on the possible reg hack that could fix this?
Thanks...
Hi
I made a small app that helps overcome this issue by making the phone usable again after a phone call.
You can get install instructions from here with a file a few posts down: http://www.modaco.com/index.php?showtopic=258974&view=findpost&p=841951
Hopefully it will be fixed by HTC soon so it's just a short term work around.
Regards
Phil
Thanks
That works, thank you very much for your effort!
We'll wait for the HTC fix.
mrpotts said:
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
Click to expand...
Click to collapse
You need Outlook installed to sync those.
Add this - SMS goes bust!
Details are here:
http://forum.xda-developers.com/showthread.php?t=330176
i had a 3g connection with google maps running in background (gps was accurate within 10 feet) and was playing namco's ms. pac-man on the tytn ii rom when device locked up mid game. Power button would put phone into standby, but it was locked up besides. i had to soft-reset.
Cool, do HTC release updated ROMs via their website?
Also, ive had the home plugin going fuzzy and locking up quite a few times now.... definitley more problems introduced since i enabled the 'lock' feature :S
No call button??
On the dialpad is no call button only videocall button???
Am i blind?........
With my phone the 'ok' button (not on the keyboard) doesn't always respond (well). Either to confirm a adjustment or to minimize/close an screen
I have found a pretty simple workaround for the issue with the screen going dim and the start menu not working after a call.
What appears to be happening is that the device is actually locking the screen yet the keypad to unlock is not displayed. So the start menu and such think they are locked. I found that if i simply power my device off and back on the password screen/unlock screen shows up. Unlock it and you are fine from there.
Not really a fix but it will save you a reboot.
Hmm im getting lots of sync problems with Windows Live :S, also my phone 'says' it's connected to 3G/H but then randomly doesnt send texts :S
Really starting to annoy me now!
I have an un-locked TyTn II that has an annoying screen problem. At least once a day, the touch screen will stop working. The device continues to function normally using buttons and/or the keyboard, but the touch screen function is dead.
In every case, I have been able to revive the touch screen by using buttons to navigate to the screen alignment settings and then use my finger to scroll around the screen till it comes back to life. Once the screen alignment program comes back to life, I align the screen and go about my business.
I have a fair amount of Spb software installed, but I had the same problem before installing any of the Spb software, so on the surface, I'm ruling that stuff out.
I have Kaiser Tweak and Paul's Tweak installed.
Any idea's would be greatly appreaciated.
Maybe this thread will help?
http://forum.xda-developers.com/showthread.php?t=337979
Thanks for your reply.
The thread you provided appears to be focused about "complete" freezing. My device continues to work as long as I use buttons and/or the keyboard. Once I align the screen, the device goes back to normal operation.
Hey guys I have flashed my Kaiser with a clean rom last night, everything went awesome, phoned work excellent just the way I wanted, and my hands were wet as the phone rang and now all of a sudden my Touch Screen doesnt work, nothing seems to be wrong with the phone itself, everything is still displayed on the screen.
Now I might need to send it back for repairs, but I reset to factory defaults couple min ago, and it says "Tap screen to begin" and I can't get any further?
Active sync or nothing works in that stage, how is it possible that I can flash my kaiser back to factory defaults if this is the case?
Isnt there a way of skipping that "Tap screen to begin" message?
Thanks a lot, any help is appreciated.
Gozzy69a said:
Hey guys I have flashed my Kaiser with a clean rom last night, everything went awesome, phoned work excellent just the way I wanted, and my hands were wet as the phone rang and now all of a sudden my Touch Screen doesnt work, nothing seems to be wrong with the phone itself, everything is still displayed on the screen.
Now I might need to send it back for repairs, but I reset to factory defaults couple min ago, and it says "Tap screen to begin" and I can't get any further?
Active sync or nothing works in that stage, how is it possible that I can flash my kaiser back to factory defaults if this is the case?
Isnt there a way of skipping that "Tap screen to begin" message?
Thanks a lot, any help is appreciated.
Click to expand...
Click to collapse
here you go:
http://forum.xda-developers.com/showthread.php?t=335568
Yo thanks man,
I have flashed my phone back to HTC's rom, touch screen still doesn't work, I can use the phone now again, I have skipped that process where it asks you to align the screen to begin with a program called Code Factory's Remote screen alignment (RSA)
Now I'm in Bahrain (middle east) at the moment, I bought the phone in South-Africa where I used to live, So I'm gonna have to use the phone for a while until I can send it in for repairs.
So just have one more problem, I can't seem to change the Main volume in the taskbar without using the touch screen, Is there any other way of changing the volume, coz I cant hear my phone when it rings at times.
Shot guys,
to adjust the volume, move the trackwheel up or down during a call, so you're gonna have to call someone.
as for vibrating, you've got me there
Man,that must be a pain that touch screen doesn't working.
Try googling MyMobiler, install on your PC, connect your PDA and it will autoinstall itself to your PDA too.
Run MyMobiler on the PC. Next thing you know you can control your PDA without even touching it at all ;-)
Cheers!
schizo said:
Man,that must be a pain that touch screen doesn't working.
Try googling MyMobiler, install on your PC, connect your PDA and it will autoinstall itself to your PDA too.
Run MyMobiler on the PC. Next thing you know you can control your PDA without even touching it at all ;-)
Cheers!
Click to expand...
Click to collapse
or get mDesktop form the net - it will give you remote desktop capabilities to your PDA + much more ....
yo guys, just wanna let u guys know, the problem sorted itself out, in the future if you guys experience the problem, put ur phone close to a TUBE T.V, and let the static fix it for u, I was busy trying to get this OLD t.v sorted out in the Hotel where we are living in Bahrain, and I couldn't see at the back, and I used my phone as a flash light to see what's going on lol, and then my Touch screen started working again.........anyone care to explain this..?
Phone is in complete working order again, happy flashing for me once again hehe.
Man, I had the same problem and I was quite desperate. I was going to replace my Vodafone 1615 (the brandized version of Tytn II) when I found your post.
I put the phone near a CRT Monitor and then magically the touch-screen was working again!
Thank you to disclose your experience.
Can anyone explain why this might work?
I had the same problems. Touched yesterday mine htc kaiser with wet fingers and the touch screen did not respond. I thought that is the same problem with humidity that I had in Amazonia. That time it got solved by heating the phone with notebook. Pillow - kaiser - notebook for few hours :-D
But this time heating did not work... With doubt I approached old CRT tv and static energy from it SOLVED mine problem too. I am happy that I did not throw it away after buying LCD one. This is the time when new technology needs some old school energy :-D
rdee said:
With doubt I approached old CRT tv and static energy from it SOLVED mine problem too. I am happy that I did not throw it away after buying LCD one. This is the time when new technology needs some old school energy :-D
Click to expand...
Click to collapse
Did you have the phone off or on , did you touch it to the screen or side of tv, and how long did you hold the phone there, this would be awesome if it works, I've been freaking out the last couple of days.
me too! i brushed my phone around the tv for 30 seconds.. no luck...
ardley216 said:
me too! i brushed my phone around the tv for 30 seconds.. no luck...
Click to expand...
Click to collapse
I think we were fooled.
bwnotredame06 said:
I think we were fooled.
Click to expand...
Click to collapse
Static can kill touch screens
I killed my old WM2003 device by sliding down a plastic slide with my kids at the park.
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
parmito said:
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Click to expand...
Click to collapse
thank you so much for taking the time to post your solution! My kaiser was dead after it got soaked in vinegair..keys were sticky, device wouldnt charge or even turn on..
what i did is put the kaiser in a bowl of water and let it rest for a few hours. Then i took it out and put it in a bowl of uncooked rice (rice sucks up water!) and let it rest overnight. My kaiser came out great with everything working fine except....the touchscreen wouldnt respond. I flashed several roms but all to no avail.
I then followed your instructions and miraculously this strange at&t rom brought my touchscreen back to life!
So thanks again
I know that many of you have disabled the "Fast Sleep" mode while making a phone call. Well what I'm wanting to do is just the opposite, disable (or lock) the touch screen entirely while making a call. The problem I'm having is that when talking on the phone I always end up touching the screen with my cheek and either accidentally end the call, call someone else, or whatever. I would like to have a utility which would lock the touchscreen maybe 5-10 seconds after a call is established. One of the hard keys or an i-pod type slider function would unlock the screen.
Does anyone know of a utility like this?
I do have the "fast sleep" mode enabled within Kaiser Tweeks. However, while the fast sleep mode turns off the screen to save battery power, it still wakes back up with just a touch.
I have an AT&T Tilt.
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
NZuercher said:
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
Click to expand...
Click to collapse
It is a lock not a today replacement. That is what I use.
Thanks parleyp, I guess I'll give s2u2 a try. The info that I've seen just seems rather complicated when all I need is a simple lock utility. Why is there discussions on s2u2 affecting the weather tab, clock display, background, etc?
Which version are you using on your tilt?
Would you be interested in something like that??
If so search for opal dialer in kaiser Rom development subforum.
I am fairly certain that you can just press the "power" button and shut the screen off. When you are ready to hang up, just hit the end button. This is not automatic, but it works for me.
yea, i was gonna say: what's wrong with just pressing the power button?
Been toying with my Today screen for ages and am nearly satisfied but after changing the order of a few items on the today screen my 'wireless' plugin no longer works.
It appears on the screen ok, but instead of a press turning the wi-fi/bluetooth on or off, it takes me directly to the 'communications' menu - as if it's locked somehow...
Can anyone help with this problem?
Cheers
Answered my own question. This behavious was because I was using it with the HomeScreen++ - with that re-activated as is well .