Related
Can any one advice me how to improve the video quality in WMP 10 on the Tytn II
Compared with my previous Tytn I, the movies & clips do not play fluid, though RAM and ROM are better, and no other programs are running.
Same Sd card, same movie which plaid well on 30 FPS format plays rather chunky on the Tytn II. Is the Qualcomm CPU lesser compliant than the old one or so?
Some Reg tweaks to perform? (and which tweaker to use / download from where?)
Thanks guys!
For Information: According to the data sheet of the chipset it is providing uncompromising video quality for Video capture and playback
(30 fps VGA - even for Messageing) http://www.cdmatech.com/download_library/pdf/msm7200_chipset.pdf
Maybe, but i fear the drivers are not playing nice with the new chipset
I mean, i understand the problem with TCPMP, since is third party software and it stopped being developed (at least the freeware app), but it shouldn't be any problem with the shipped software, right?
Here is to hoping for an updated driver... GO HTC!
could this be why they say to use activesync to transfer everything onto the p4550? maybe its not optimised for it or something. but still shouldnt lag like that
Maybe it is a lame question, but does ActiveSync automatically converts video&/mp4 to a format more digestable by the device? Like SPB Mobile DVD?
my impressions
Hi !
I also noticed that video playback is kinda bad on the TyTN II, compared to my Prophet (overclocked to 260MHz). When using TCPMP and even Coreplayer, the DirectDraw rendering mode is about 3 times slower than Raw Framebuffer mode, which makes me believe that it's a DDraw / drivers issue. Since WMP 10 most likely uses DDraw, that's probably why the video is lagging...
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
It's still kinda weird that the TI OMAP 200Mhz (OC @ 260Mhz) on the Prophet performs about the same as the "ultra fast brand new never before seem" MSM7200 400MHz when it comes to raw power (again, ignore DDraw case, where Prophet is 3 times faster, that will be fixed soon... i hope...)
GL&HF
RPG0 said:
Hi !
I also noticed that video playback is kinda bad on the TyTN II, compared to my Prophet (overclocked to 260MHz). When using TCPMP and even Coreplayer, the DirectDraw rendering mode is about 3 times slower than Raw Framebuffer mode, which makes me believe that it's a DDraw / drivers issue. Since WMP 10 most likely uses DDraw, that's probably why the video is lagging...
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
It's still kinda weird that the TI OMAP 200Mhz (OC @ 260Mhz) on the Prophet performs about the same as the "ultra fast brand new never before seem" MSM7200 400MHz when it comes to raw power (again, ignore DDraw case, where Prophet is 3 times faster, that will be fixed soon... i hope...)
GL&HF
Click to expand...
Click to collapse
Have noticed the same thing. Using corecodec rawfb is the best option. Having said that I can watch h.264 AVC encoded at 400KBPS no problem. On my wizard watching anything other than DVI was pretty much impossible. So the processor has the power - we just need the drivers to back it up now.
Unfortunately this is the price you pay for being an early adopter. I imagine once the at&t version comes out drivers wont be long behind.
Don't people find a general slowness with the Kaiser? My old XDA Mini S OC'd to 260Mhz seemed so much quicker in many ways. The 400Mhz processor in the Kaiser is definitely quicker in some areas, but twice as quick as the old 200Mhz XDA? I think not. Here's hoping HTC release a new ROM soon. Bad news is I can't even see it on the HTC eClub site!!
Your MDA, running what? WM2003SE?
WM2003SE in general could be faster than WM5/6 because WM5/6 is Flash based. That means, the persistent storage. You wont loose your app when the battery is empty, but yeah you must pay the price.
UncleJimbo said:
Don't people find a general slowness with the Kaiser? My old XDA Mini S OC'd to 260Mhz seemed so much quicker in many ways. The 400Mhz processor in the Kaiser is definitely quicker in some areas, but twice as quick as the old 200Mhz XDA? I think not. Here's hoping HTC release a new ROM soon. Bad news is I can't even see it on the HTC eClub site!!
Click to expand...
Click to collapse
RPG0 said:
Hi !
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
GL&HF
Click to expand...
Click to collapse
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
ceevee369 said:
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
Click to expand...
Click to collapse
I'm pretty sure DirectDraw is 3 times slower.
Can you please benchmark on a clip with and without DDraw ?
I would really want to know if there are ROMs out there with DDraw fixed
BTW: this is KAISER SPECIFIC, does not apply to other PPCs afaik
Hello.
There is exactly the same pb on my new LG KS20 (MSM 7200 chip too)
I can't read video or play game with a decent frame rate
2 months later and still no fix for the slow performance in Video.
I installed the Coreplayer, took 2 weeks to play around with all settings, though no big changes. Directdraw enabled play s "OK". (no dither)
I guess the best thing to do is to ask CorePlayer which settings fit best on the Tytn II
It's all because of the missing video driver the the Qaualcomm 7200 chipset, if I watch a video on my Tytn 2 with TCMP using direct draw the fps feel 10 fps, now my original Touch with the 201mhz Omap 850 cpu plays the same video with direct draw very smoothly
We need video drivers
Radeon123 said:
It's all because of the missing video driver the the Qaualcomm 7200 chipset, if I watch a video on my Tytn 2 with TCMP using direct draw the fps feel 10 fps, now my original Touch with the 201mhz Omap 850 cpu plays the same video with direct draw very smoothly
We need video drivers
Click to expand...
Click to collapse
I hope you signed the petition to HTC yes?
i forward the link to the petition to Cnet Asia. Hope they will make some noise!
Yes I signed the petition, read the petition post, glad HTC are aware of it
Radeon123 said:
Yes I signed the petition, read the petition post, glad HTC are aware of it
Click to expand...
Click to collapse
Aware? Maybe, but do they care?
Maybe I'm the fly in the ointment but I have created lots of mp4 files from my normal video and use wm player and everythings great. Sorry
j1ngles said:
Maybe I'm the fly in the ointment but I have created lots of mp4 files from my normal video and use wm player and everythings great. Sorry
Click to expand...
Click to collapse
Which MP4 convertor did you use and what is the FPS now? on 30, things become nasty, though 10 is stable.
I have neithe isues with small videoclips, though playing an AVI or MPEG file directly (712mb) is crappy for sure
ceevee369 said:
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
Click to expand...
Click to collapse
TCPMP DOES support AAC with a plug-in that they are not allowed to host any more. It, however, is considerably worse than the one in CorePlayer.
If you do need it, I dig up the download URL of the AAC plug-in for you.
Hello,
Just brought Diamond and noticed that Coreplayer QTV doesn't work. Need to switch back to Directdraw. Anyone having similar problem ?
Thanks !
try this version.. and let us know if it works!
http://forum.xda-developers.com/showthread.php?t=380387
really??what a shame
so...is it another device without the proper driver?
No, its an incompatability.
someone1234 said:
try this version.. and let us know if it works!
http://forum.xda-developers.com/showthread.php?t=380387
Click to expand...
Click to collapse
It seems to me according to the post, the build in the post does not relate to QTV.
Seems there is also some discussion regarding the problem on Tytn II with WM 6.1
http://www.corecodec.com/forums/index.php?topic=1044.15
Maybe I will just wait for the 1.2.5 release.
The Diamond does have driver acceleration though so do you really need QTv? (ie is DirectDraw slow?)
The QTv mode in CorePlayer is a "workaround" that the developers had to use for Qualcomm devices that doesn't have proper drivers, since the Diamond does have drivers you shouldn't need to use the work around..?
undac said:
The Diamond does have driver acceleration though so do you really need QTv? (ie is DirectDraw slow?)
The QTv mode in CorePlayer is a "workaround" that the developers had to use for Qualcomm devices that doesn't have proper drivers, since the Diamond does have drivers you shouldn't need to use the work around..?
Click to expand...
Click to collapse
For performance, my guts feeling is that it is not better compared with universal (I sold my universal before, cannot compare). Hence, I think there should be room for improvement.
I am not familiar with what QTv really does, and not sure how to define what a driver is supposed to optimize. But since Diamond runs TouchFlo 3D pretty fine, can I say it has proper driver ? Does driver need to accelerate 2D applications or video decoding ? I am not sure about that.
Thanks.
We just released CorePlayer v1.2.5 that has a QTv fix for WM 6.1, see:
http://www.corecodec.com/forums/index.php?topic=1071.0
Can anyone confirm that the 1.2.5 works on the diamond?
1.25's qtv mode is indeed working fine on Diamond.
I am not sure how to interpret these benchmark numbers tho. The video file is 640x480 mp4. In any case, video looks really clear altho screen size is a bit too small for my taste.
Average Speed: 112.86% (vs. 77.17% on DirectDraw)
Video Frames: 4706 (vs. 3054 on DirectDraw)
Audio Samples: 8674720
Amount of Data: 31939 KB
Bench. Time: 02:53.913
Bench. Frame Rate: 27.060
Bench. Sample Rate: 49879
Bench. Data Rate: 1.50 Mbit/s
Original Time: 03:16.280
Original Frame Rate: 23.976
Original Sample Rate: 44100
Original Data Rate: 1.33 Mbit/s
The QTV working when using coreplayer 1.2.5, but I experience the screen not synchronize when playing fast motion video. Just like have a line moving form left to right. Is it normal behaviour?As I haven't such problem when I was using Dopod 900 with Intel Xscale mode.
ngod said:
The QTV working when using coreplayer 1.2.5, but I experience the screen not synchronize when playing fast motion video. Just like have a line moving form left to right. Is it normal behaviour?As I haven't such problem when I was using Dopod 900 with Intel Xscale mode.
Click to expand...
Click to collapse
It's lacking vertical synchronization.
It exhibits the same problem on the Kaiser.
As far as I can tell only DirectDraw and GDI use vsync in CorePlayer, unfortunately they also perform the worst (GDI is usually a lot better than DirectDraw on the Kaiser though, dunno about the Diamond)
1.2.5's QTV does not work on youtube !
I just testet 1.2.5 on my Diamnond HTC, but it didn't work on YouTube videos. The wierd thing is that at the first try, it did play a YouTube video but after a restart, it stopped playing YouTube videos. I tried DirectDraw but it didn't help. With QTV, I get a purple screen with the "loading cricle" going round and round and with DirectDraw, I get a black screen with the "loading cricle" going round and round. So, has anyone this prblem? I mean problem with YouTube videos on CorePlayer?
lutanica... Video output, IE: Directdraw has nothing to do with the buffering icon..... likely you need to change your YouTube Quality setting..... 'Preferences > Network > YouTube' and select one that works.
beta_boy said:
lutanica... Video output, IE: Directdraw has nothing to do with the buffering icon..... likely you need to change your YouTube Quality setting..... 'Preferences > Network > YouTube' and select one that works.
Click to expand...
Click to collapse
I've done this setting and youtube works fine through Coreplayer. One weird thing though the Youtube appication that came with my diamond now won't play any video, the sound plays fine but the screen is blank. It worked fine before installing Coreplayer, but i've also installed several other apps and i'm not sure whether it's coreplayer or something else that's messed up the Youtube app?
anyone else experienced this on their diamond??
HELP!
i've some problem with coreplayer 1.2.5 and QTv.
i've never noticed before but, since some week with QTv :
- video and images takes some seconds to display
or
- images are not displayed till i press again on screen
or
- videos and images are not displayed at all
i dont know what happened
i tried to uninstall, clear registry, softreset, reinstall
but with no results...
Qtv is buggy on the Diamond and must be used with "TytnII Driver mode".
Mine was not working and suddenly it does now. It helps a lot, but there is still the Vsync issues.
Hi my coreplayer couldnt panelling to the middle of the movie. I had to watch it from the start, is there anyway i can forward it to the mid part of the movie? My file is in FLV.
Hi, I think that almost everyone want to play some game on his phone. So, I will test some of them, and post here results, and problems. Most of all, I test demos or freeware games, so actually full game results may by different. I hope this will be helpfull for you.
ofcourse it will be helpfull
thx
So, I prepared some games to test, I will test them later becouse I am still serching info about two PDAMill games. These games are Snails Reloaded (just QVGA) and Anthelion 2 (QVGA and VGA version). For some reason, these games runs much slower on Diamond than on brother´s Asus P535 when its CPU is set to 200MHz! Yes, 200MHz outperform in these games our 528MHZ one. I assume that this is due to incompatibility with WM 6.1. But it is strange. On PDA Mill site, they say that WM 6 is supported. Maybe WM 6.1 or combination of WM 6.1 + VGA is the problem. I dont know. Yes, you can run these games, but at speed of snail. Firts I thought that maybe transform from QVGA to VGA is the problem, but Anthelion 2 has VGA version too, and this VGA version was as laggy as QVGA version. If you think that Anthleion is 3D game, and Diamond maybe just cannot handle 3D, it is wrong. Even menu in this game is stupidly laggy, concretelly transtions in menu. And Snails Reloaded act just like Anthelion 2, and they are just 2D game. But I forgott that VS Bench on our devices is very good 2500+ points, that this isnt due to slow Diamond CPU. (VS Bench of Asus P535 is in 520 MHz mode 2300 points and on 200 MHz mode only about 1000 and it still outperform Dimand) .
So, for now I can say that you can play these games, but prepare yourself for laggy game experience.
Next game I tried is Duke Nukem 3D - this is even worst - becouse you can not even run it. After loading, screen goes black, and you must restart it. This is bad news, becouse I liked Duke Nukem 3D on PC, and I played it a lot on my previous WM 5 phone. This game doesent like VGA or WM 6.1.
And for now last one: Call Of Duty mobile. This nice 3D Game runs great, you will get even better framerate than previously mentioned Asus P535 in 520 MHz mode. Still, this game is not smooth, but definattely playable. First game which runs on Diamond slightly better than on P535 (520MHZ adjustable CPU).
More games speed and copatibility info will be here soon.
Nice work keep it up , may want to put them in a list format , with links to the games as well
For ref Age of Empires Gold Edition, Works fine on the Diamond
One question: Where can I buy a licence key to have a full verion of Age of Empires Gold Edition?
Fred
Yes, I know. For now, I will add games just as new replys, but I will make some list in future, when more games will be tested. I can add links, if you want, but remember that most apps I am testing are demo versions, but some freeware will be there too.
Has anyone tried bejeweled 2 yet? I don't wanna install mines until my screen protector arrives!!
best game ever bejeweled 2
I Have Working:
My Little Thank - Just some problems to acess the register screen but works
Solitaire City - Works Fine
SkyForce Rel. - Does not work
Skyforce - Does not work
Bejeweled 2 - Works
Rocket mania - Works
Tradewinds 2 - Works
Insane Aquaium Deluxe - Works
Dielmann said:
One question: Where can I buy a licence key to have a full verion of Age of Empires Gold Edition?
Fred
Click to expand...
Click to collapse
IIRC, you cna't - it's long been abandoned.
Siruss said:
SkyForce Rel. - Does not work
Skyforce - Does not work
Click to expand...
Click to collapse
Did you contact the developer? It's working just greta on all my other VGA devices, incl. WM6.1 ones - that is, it must be incompatible with the Qualcomm chipset.
Double post - bad connection - sorry
Pocket Heroes - works great
Leomnade Inc.- works but can't get pass the beginning menu
Tombraider - seems to work, as I can't get pass the menu because of missing hardware buttons
Lemmings 1.0 - the screen is black but I can hear the music
Asphalt 3d - runs on 1/5 of the screen
Worms - work great but luck of hw buttons (can't shot, jump and so one)
Houseofdead 3d - works but slow
Poket Quake - shows menu but the game is blank window
Transport Tycoon - stucks on loading screen
koven said:
Asphalt 3d - runs on 1/5 of the screen
Click to expand...
Click to collapse
is that 3D_Asphalt_3.jar ? under Jblend v3.2.8 20061016c, it ran full screen on VGA; see the compatibility chart in my MIDlet Bible.
no it's PPC game (*.cab)
Hi Pokvitek, May be the reason for not working / poorly working games on Diamond compared to other (older) VGA devices is that the Games are developed for Open GL processing whereas our Diamond has seperate Qtc processing (the 3D accelerator chip)...
Can anyone put more light on this??
Anyone use or know of a good NES emulator. I would kill to have mario, master blaster, etc on my diamond.
thanks
If anyone would like to have an really good Lemmings Port, look here:
CAB: http://www.cs.wisc.edu/~zeppenfe/files/PocketLemmings.cab
If problems occured with moved grafics or similar, then exchange this .EXE: http://www.cs.wisc.edu/~zeppenfe/files/LemmingsCE.exe
YouTube Movie: http://de.youtube.com/watch?v=11_bG6--h6U
Level AddOns ZIP: http://www.cs.wisc.edu/~zeppenfe/files/LemPack_Custom.zip
Thats the first Port ive seen, that leans on the original game, with full levels from "Lemmings" and "Oh No More Lemmings". All you really need, is the "main.dat" file from your (hopefully ) original Lemmings...
I dont know, I personally think that Open GL is not the issue. Anyway, some games dont work due to WM 6.1, some due to VGA, and some due to problem that nobody knows. Qualcomm chipset has ARM 11 operation CPU, so this should not be problem. About Skyforce, I have not a solution, but an idea. I found something interesting. We all know spb benchmark, and with new ROM Diamond has in graphics about 1600 points. This bench can not use Hardware acceleration, so this must be result of just 528 MHz Main CPU. Now, point is that i thought that Diamond grapics index is low due to WM 6.1, but I found other phones running WM 6.1, and they had graphics index about 3000, with 400MHZ CPU. So, I was sad, becous it seemed that Diamond is just piece of crap. THEN I found something interesting, graphic index of IPaQ 214 - WM 6.1 VGA device, with 624 MHz Marvell Monahan 310 CPU. His grphic index was about 1600 too. So, device of this strenght, like IpaQ 214 definnetelly is, should outperform Diamond. So, I guess, that there is something. I dont know what, but I am sure that is.
koven said:
Pocket Heroes - works great
Leomnade Inc.- works but can't get pass the beginning menu
Tombraider - seems to work, as I can't get pass the menu because of missing hardware buttons
Lemmings 1.0 - the screen is black but I can hear the music
Asphalt 3d - runs on 1/5 of the screen
Worms - work great but luck of hw buttons (can't shot, jump and so one)
Houseofdead 3d - works but slow
Poket Quake - shows menu but the game is blank window
Transport Tycoon - stucks on loading screen
Click to expand...
Click to collapse
WORMS: there is a patch available to assign the sound up and sound down buttons to jump and backflip. then evrything works
NES emulators do not work properly because the lack of hardware buttons. the onscreen buttons do not work very well.
Hey guys
Title says it all
I was wondering, after all the new drivers that have been released and all the discussions has any1 actually been able to use the Kaiser as a decent video player??
Ive been trying, tweaking Core Player, trying different drivers, different setting when i encode etc etc... But i cant get the video to play smoothly! I still get "tearing" between scenes... Its just not a pleasure to watch
Anyone else had more luck of late??
Try this: http://forum.xda-developers.com/showthread.php?t=357330
So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!
I can play YouTube stuff just fine on my Tilt with the newest TCPMP. Haven't tried other stuff yet.
randomguy321 said:
So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!
Click to expand...
Click to collapse
I use coreplayer version 1.2.2 and QTV display driver delivers up to 70% better performance than TCPMP. Try to find a solution to your problem on coreplayer forum.
Where did you get the 70% number from?
Im not sure if this helps...but
I converted a few movies that I had downloaded a while back thru windows media player...I think Pulp Fiction or something. It played just fine. Great video, great audio, good synchronization. Really impressive. All this on AT&T Tilt.
Keep working on it or flash a ROM since most have the support u need to watch the video. Honestly, u would probably benefit from reading the forums for about flashing a ROM than to mess with new codecs and other drivers.
Have u tried downloading TCPMP and core player. Install both. Then open TCPMP in background. Now open ur windows media player and try to play a video.
Now if u can stream videos from ninjavideo.net ur doing better than I
Cheers
-ac
Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??
That's right, they've fixed it.
randomguy321 said:
Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??
Click to expand...
Click to collapse
ChumleyEX said:
Where did you get the 70% number from?
Click to expand...
Click to collapse
There's a benchmark option in coreplayer. Play an avi file first on QTV driver and then on Rawframe buffer you'll see the difference. Than if you're still not convinced you can play the same file in TCPMP on rawframebuffer and compare the results.
Youtube w/ the new manilla 2d works flawlessly for me, as does any .flv i just plop on the phone (without re-encoding). Streaming mobitv is a bit laggy. But other then that my video runs great. For awhile quicksilverscreen was working str8 off the website too. (seems to not be working atm however).
I installed no new video drivers or anything just manilla2d. .flv has always worked since i installed the tmpg stuff.
Yes I Can!!!!
Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!
randomguy321 said:
Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!
Click to expand...
Click to collapse
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.
brilliantslide said:
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.
Click to expand...
Click to collapse
here is what i think of from the top of my head...qtv is one of the options in the video driver selection in Coreplayer...Coreplayer is the paid version of tcpmp...From my experience, it really smoothens out the transition of scenes in this mode, but it also depends on how the video is encoded I think, coz' the movies I had encoded much earlier which i used with my treo 650 were still choppy even with the qtv display....But my recent acquisition, Ironman, it plays quite flawlessly...
v 1.25 refers to the latest version of Coreplayer, which fixes most of the bugs of earlier version...You can scope it out at corecodec.com, but sadly there is no trial version for it though so if you really want to watch and play videos on your tilt, it might be worth it for you...
As to the youtube videos, you can either:
Buy and use Coreplayer
Download the Youtube player extracted from the opal
Use the recomp version of tcpmp, the orginal won't work on the 6.1 so look for the recomp
Or if you wanna show off a bit on the bus or something, download opera 9.5 and flashlite 3.1, The flash vid will play as a part of the web page....
Is there a fully working, full speed Genesis emulator for the Kaiser?
I tried Genesis Plus 0.6. With frameskip on auto, it was way too slow. And it doesn't have any options to remap keys.
I tried PicoDrive 0.52. It was also too slow and it doesn't have any options to enable frameskip. I could remap keys, but up was right, down was left, right was down, and left was up.
Are there any full speed Genesis/Mega Drive emulators for the Kaiser? There were some nearly full speed ones for my ancient Nokia 6620 (150 MHz Arm9, 16 MB RAM), so full speed emulation on the Kaiser (400 MHz Arm9, 128 MB RAM) should be possible.
I have not found even a decent Gameboy, Gameboy Advance, or Nintendo emulator. My iPod Touch has got them all and working great :<<
You won't find any emulators at the moment that are going to be fully smooth (forget about sound) on kaiser. sorry, but that's the way it is.
hopefully incoming version 0.1 of fpsece will let us play games like final fantasy VII with decent framerates. it may be possible, as makers of it have promised to release source code for gfx plugin. maybe, just maybe someone will try to write a dedicated gfx plugin and to utilize 3d hardware in kaisers to give it bit more processing power.
br
bro
[EDIT]
funny thing is, that silly old nokia N70 can play gameboy advance games without sound at almost full speed (frameskip 1), and all of it on ~200 mhz cpu. those who tried playing gba games on kaiser know, that they are not playable at all.
bronx said:
You won't find any emulators at the moment that are going to be fully smooth (forget about sound) on kaiser. sorry, but that's the way it is.
hopefully incoming version 0.1 of fpsece will let us play games like final fantasy VII with decent framerates. it may be possible, as makers of it have promised to release source code for gfx plugin. maybe, just maybe someone will try to write a dedicated gfx plugin and to utilize 3d hardware in kaisers to give it bit more processing power.
br
bro
[EDIT]
funny thing is, that silly old nokia N70 can play gameboy advance games without sound at almost full speed (frameskip 1), and all of it on ~200 mhz cpu. those who tried playing gba games on kaiser know, that they are not playable at all.
Click to expand...
Click to collapse
My friend always plays ol` good games (GB, GBA, NINTENDO) with his N95 and they look gorgeus compared to kaiser. I just hate the fact that we don`t have anything matching.
solid nes emulator for kaiser exists
Lokioki said:
I have not found even a decent Gameboy, Gameboy Advance, or Nintendo emulator. My iPod Touch has got them all and working great :<<
Click to expand...
Click to collapse
I suggest u guys look for pocket nester. it runs nes roms just fine on kaiser. requires some remapping of keys. I believe it took some googling after trying xda forum links. i located the emulator while looking for kinoma free play here on xda.
cheers
[edit] pocketnester
and morphgear
anmclark23 said:
I suggest u guys look for pocket nester. it runs nes roms just fine on kaiser. requires some remapping of keys. I believe it took some googling after trying xda forum links. i located the emulator while looking for kinoma free play here on xda.
cheers
Click to expand...
Click to collapse
It looks like the latest version is 0.7 from 2003 Giving it a try tho, need to source some roms.
Update : Works fine if you don't use the onscreen controls, just maps to the dpad and A=Softkey Left B=IE Button Start=Softkey right Select=SMS button.
The Audio works best upto 22800, 8 bit, with 2 set for frameskip .
Apparently free .NES ROMs here - full commercial games at non-warez site.
PS Sorry to hijack your MegDdrive thread with NES info but I'm all excited I got this working smooth.
seems right
snachez orignally wrote:
It looks like the latest version is 0.7 from 2003 Giving it a try tho, need to source some roms.
Click to expand...
Click to collapse
yup, that is the one. simply copy pocketnester app to storage card, transfer your roms, load roms thru program or just setup association with nes roms inside options and double click ur rom
remember ull need to remap, which took a little state diagram for me to get it right.
if u can find your mario 2 it is perfect for ppc since no time limit, four characters, and lots of places when you drop it simply scrolls down. makes sloppy button presses little less upsetting!
morphgear seems to work fine
feanor512 said:
Is there a fully working, full speed Genesis emulator for the Kaiser?
I tried Genesis Plus 0.6. With frameskip on auto, it was way too slow. And it doesn't have any options to remap keys.
I tried PicoDrive 0.52. It was also too slow and it doesn't have any options to enable frameskip. I could remap keys, but up was right, down was left, right was down, and left was up.
Are there any full speed Genesis/Mega Drive emulators for the Kaiser? There were some nearly full speed ones for my ancient Nokia 6620 (150 MHz Arm9, 16 MB RAM), so full speed emulation on the Kaiser (400 MHz Arm9, 128 MB RAM) should be possible.
Click to expand...
Click to collapse
download site
download the generator and the emulators, run the files while ppc connected to activesync and computer thru usb, soft reset and proceed with installations, transfer appropriate roms to storage card, goto programs->games->morphgear, switch to whichever file type and load rom
try it
Genesis/Mega Drive emulation is currently broken in Morphgear. It crashes immediately on opening a ROM.
Check out Smart Gear. It emulates Genesis, SNES, NES, Gamegear, and Gameboy. Unfortunately, it's not free.
pocket nester works great for playing nintendo games, i'm playing mike tyson's punch out now, SICK
I use picodrive v0.52 for mega drive, pocketgnuboy v1.20 for gameboy and PocketGBA v060723 for gameboy advance and all run fine with sound, only thing is on picodrive turn the sound sample rate down to about 22050 or less because i've found if set any higher games become quite laggy.
No sound on Kaiser?
I am running Picodrive v0.052 on my TyTyn II and all of the roms run fine, but without sound. I have tried changing the sample rate, disabling Z80 and any other options I can see, but so far had no joy.
Anyone know what I am doing wrong?