I have searched the forums until my eyes bleed, I have downloaded and downloaded but still it does not work.
Does anyone have HTC Home Plugin cab files for the following?
MDA Vario/Wizard running WM6
I have managed to get the HTC Home Plug-in to appear in the Today Options screen and I have installed the HTC HomePlug-in customizer and run it but still nothing appears on my Today screen.
If anyone has managed to get the HTC Home Plug-in running on a Wizard with WM6 then please point me at the files I need.
Many thanks in advance.
Mick
try this one
http://rapidshare.com/files/36863085/HTC_Touch_Home_Plugin.cab
file not found...plz look into it
Yep, duff link. Could you please send me another link to the pulgin and a compatible HTC Plugin customizer. (Could you post the file here please, at work and Rapid Share is blocked)
Many thanks for your help
Mick (St.Helens, Merseyside)
I am not sure but I remember I picked up somewhere here that the home plugin does not work properly if installed as cab rather than included in the ROM.
You may check it.
Cheers!
Huckleberry88 said:
I am not sure but I remember I picked up somewhere here that the home plugin does not work properly if installed as cab rather than included in the ROM.
You may check it.
Cheers!
Click to expand...
Click to collapse
I have, that's why I am posting here. The question is still vaild,
'If anyone has managed to get the HTC Home Plug-in running on a Wizard with WM6 then please point me at the files I need.
Many thanks in advance.
Mick
Hi,
if i right know, give's 2 versions: light witout HTC-programs and a professional version within HTC-programs. (so i found this 2 versions for german WM6)
May be, that you need the WM6 professional version with integrated HTC-tool-programs.
Frank
Hello
I reverted to WM5 by using this ROM:
http://forum.xda-developers.com/showthread.php?t=345205
Works great. Thanks for your help everybody.
Mick
Just use the HTC Home that is version 1.5, it works on WM5 and WM6. I installed it on my device using the cab, and modded it no prob. I run the Jag rom and have no issues. HTC Home above 1.5 don't always play nice unless they are cooked into the rom.
HTC Home v1.5
where can i get it for download?
greetings Frank
v1.5 also not works/displayed
i have found it and install the HTC home v1.5 on my device.
But it's also not work: clear scren, were the HTC home-screen should be to displayed...
i capitulate...
HTC Home for Wizard
Here try this one and make sure you uninstall any other version you have and have soft reset before installing
I also tried to attach the Home customiser but it kept failing so i have uploaded it to rapidshare
http://rapidshare.com/files/86916021/HHCv08b_1_.cab
it's work!
scousemartin, great thanks!
The HTC Home plugin now works! I be so happy...
What was my error by all the other versions and installations?
I think it's was partially not compatible to WM5 or the installations was incompletely. So i install in the last an older configurator...
I don't know, what was the error...
Gives ther some tips for setting other funktions for the icons, so i can to determine all open programs by one klick in the HTC Home Plugin?
over again great thanks to scousemartin!
PS:
one other question above HTC Home plugin:
In the top on left the screen shows the provider-network. So by me it's Vodafone.de.
If i power up my device (i'm at home), so it's show shortly "vodafone.de" and than for under one second "home" and than again permanently "vodafone.de".
I think, if i be in my homezone "vodafone at home" the HTC home-plugin is shortly signaled "home" by power up the device. If it right, that the HTC home-Plugin can show the "home-zone", so is the signalisation to short.
Give's ther an trick to show the Signalisation of "home-zone" permanently or that the plugin can showes it by permanently switch the displaying between Network-provider and signaled "home" or a other way to display the homezone if i be in my homezone?
Thanks for inside informations!
Frank
That was the only one i could get to work for the wizard to,glad you are happy, as for a task manager ,to show you all running programs, just add it to the program tab of htc home and then you can just click it to show up all running programs, or install Battstatus, that has a task manager built into it ,or use x-button
"home" signalisation included?
Thanks, i will test the programs or plugins for end all open programs by on click in the next time.
but... what is with the signalisation "home"? It is right, that HTC home can display the homezone (only very shortly) or it is a false interpretation, that is was short displayed "home" by power on the device (if i be in my homezone)?
Gives there an option, that it can displayed a longer time as under one second?
additionaly:
Oh, "home" was not by each swith-on displayed! Is my device longer time switched off (standby), than showes "home", if i switch from on to off and afresh on (also from the second switch-on).
Frank
Edit: I posted in the wrong section. my mistake.
Can v1.5 be installed if v1.0 is in the ROM?
This looks interesting. I'm running Octaivoi v6 which has a built-in HTC Home. I assume it's v1 although I don't really know.
Do you think there is a way to switch to v1.5? There is no way to uninstall the HTC Home from the ROM, of course...
Many thanks, man!
scousemartin said:
Here try this one and make sure you uninstall any other version you have and have soft reset before installing
I also tried to attach the Home customiser but it kept failing so i have uploaded it to rapidshare
http://rapidshare.com/files/86916021/HHCv08b_1_.cab
Click to expand...
Click to collapse
lkmda said:
Do you think there is a way to switch to v1.5? There is no way to uninstall the HTC Home from the ROM, of course...
Click to expand...
Click to collapse
a experiment:
go into the registry: HKLM-SOFTWARE-HTC and delete the entry HTCHome. Make sure, that you have make a registry-backup, before you delete the entry.
Make a softreset.
If now the HTCHome-display not shows, look to start-settings-home-elements whether there still the entry "HTC Home".
If not, so test the setup of HTCHome 1.5, if the setup can now overwrite the older files or if it got an error-message.
May be, that you must have the extracted files and copy it manualy.
How i said: It's an experiment! May be that it works, may be, that it not works...
If the newer files not can be to copying, than restore the registry, so that the older HTCHome-Plugin again can works.
Frank
Hi,
After installing the HTC Touch keyboard/keypad on the Kaiser, the hardware keyboard does not still to work.
I do not wish to disable xT9 when using the Touch Keyboard but when switch to the normal keyboard, the hardware keyboard should work as per normal as well as the contact autocomplete.
Anyone can help on this?
Anyone can help me on this?
pmtan666 said:
Anyone can help me on this?
Click to expand...
Click to collapse
where did u get the file? show me the link
also did you install IMSelector and SIPChange?
This is where I got the cab file from. (Cab Installer WWE version).
http://forum.xda-developers.com/showthread.php?t=336587
http://forum.xda-developers.com/attachment.php?attachmentid=55596&d=1193351352
After installing, the contact autocomplete feature seems to be disabled.
Also, the predictive text feature for both hardware keyboard and soft keyboard seems to be disabled as well instead the xT9 menu will appear.
Can this issue be resolved?
this cab disables XT9 in my dual, maybe you can give it a try..
Cheers..
So, I searched around here, and couldn't find any information on this...
Anyway, I don't like the TouchFlo very much... There's just too much going on at once. I prefer the good old HTC Home... But, when I install the version I have, it doesn't work.
Now I've read on a couple other sites that I might need the VGA version, can anyone confirm this, and if they can, where can I find a copy?
Thanks in advance!
Make sure you disable TouchFLO, and go here.
http://forum.xda-developers.com/showthread.php?t=351553
I just for fun tried that HTC VGA above, and it didn't work too well. Search for HTC home2 and it'll look good on the fuze. That's what I use. HHC works with it, also, although the examples are small.
Edit: finally figured KD8NS' post out above--You don't have to disable touchflo, like just posted, it's TouchFloF3D that you need to disable. Better yet, just use Da_G's ROM, and TF3D won't be there at all!!!
could you link to the file pls?
Fuze Full Qwerty virtual keyboard stuck on numbers
I've installed the NATF's v2.3 rom on my HTC fuze and now my full qwerty virtual keyboard is stuck on numbers. I've tried tapping the ABC button but nothing happens. Does anyone know a fix for this. I've heard there is a cab fix but I'm unable to find that specific cab file
Wrong palce to ask but here you go.
NATF's ROM http://forum.xda-developers.com/attachment.php?attachmentid=135789&d=1228781946
I had a ROM that had an HTC Start Menu that brought up the Program tab instead of the traditional start menu. But I can't find a cab for it and I can't find the rom that had it. Does anyone know where or how I can get that feature?
Thanks in advance,
Daniel
this would be nice to have .... I hate QuickMenu ... it messed up my phone
Hi, im looking for a cab or registry tweak to get back the original start menu...? i dont like the one with lines between each menu and icons only of recently used applications. i have been looking all over the net, managed to find the cab to disable finger menus, but still cant find the one to get the original start menu.
if it is rom specific i am using touch x 10.8
maybe this will help u
http://forum.xda-developers.com/showthread.php?t=528760