HTC Touch Keyboard/keypad on Kaiser - Tilt, TyTN II, MDA Vario III General

Hi,
After installing the HTC Touch keyboard/keypad on the Kaiser, the hardware keyboard does not still to work.
I do not wish to disable xT9 when using the Touch Keyboard but when switch to the normal keyboard, the hardware keyboard should work as per normal as well as the contact autocomplete.
Anyone can help on this?

Anyone can help me on this?

pmtan666 said:
Anyone can help me on this?
Click to expand...
Click to collapse
where did u get the file? show me the link
also did you install IMSelector and SIPChange?

This is where I got the cab file from. (Cab Installer WWE version).
http://forum.xda-developers.com/showthread.php?t=336587
http://forum.xda-developers.com/attachment.php?attachmentid=55596&d=1193351352
After installing, the contact autocomplete feature seems to be disabled.
Also, the predictive text feature for both hardware keyboard and soft keyboard seems to be disabled as well instead the xT9 menu will appear.

Can this issue be resolved?

this cab disables XT9 in my dual, maybe you can give it a try..
Cheers..

Related

Xt9 and hardware keyboard

is it possible to turn off annoying t9 only while using hardware keyboard? i cannot use FN+key combinations... Complete xt9 disabling renders touch dual keyboard useless...
i;ve been looking for teh same thing but couldnt find an answer, so ended up removing it, its such a good touch keyboard but messes up my hardware qwerty keys :/
GiZZy said:
i;ve been looking for teh same thing but couldnt find an answer, so ended up removing it, its such a good touch keyboard but messes up my hardware qwerty keys :/
Click to expand...
Click to collapse
There is a cab some where, check the kaiser section, I think dutty made it.
found it on his web
http://duttythroy.lives-in.eu/
FTP -> Cabs -> duttythroy Disable xt9.cab

Kaiser Slide Keyboard and XT9 Trouble

Hello folks, i have searched these forums and cant seem to find the answer i am looking for regarding xt9 and the kaiser.
I have a kaiser and have installed WM6.1 duttys march04 rom and 1.64.08.21 radio, with the HTC touch keyboard and keypad CAB.
The keyboard/keypad work excellently when using the device with one hand, and xt9 seems to pick up alot of words
BUT
when i am typing long texts/emails, and using the slide out hardware keyboard,
xt9 deletes characters and corrects words when i dont want it to, even when i click the xt9 symbol to turn it off, or even change it to a different input like Keyboard or Transcriber. very annoying/useless.
please help!!
thanks in advance
mcall_r
nobody got this same issue?
You might be looking for a way to disable xt9 then.
http://www.google.com/cse?cx=000825...w&q=Disable+XT9&cof=FORID:0&ie=utf-8&oe=utf-8
no i dont want to disable xt9 totally i only want to disable it for the hardware keyboard, as it works great for the "touch" keyboard/keypad, and i hate using abc input.
Is this possible?
use the xda google search try these to search these words: Xt9 and hardware keyboard.
look at the fifth link. someone had the exact same problem as you and the solution was given. it was dutty's disable xt9
grandpareza said:
use the xda google search try these to search these words: Xt9 and hardware keyboard.
look at the fifth link. someone had the exact same problem as you and the solution was given. it was dutty's disable xt9
Click to expand...
Click to collapse
that disbale uutility will screw up your keypad even worse. When it installs, it wipes out the image files used for the xt9 and then you won't be able to uninstall the touch keyboard/pad at all. I would recommend not using the disable utility.
Keep in mind that the Touch keyboad/pad was designed for the HTC Touch device, which doesn't have a slide out keyboard. Therefore the code was never meant to run on the Tilt, at least perfectly. I've tried every variation of the touch keyboad and they all don't work well for one reason or another....
i see.... well thanks anyway.
does anyone know of a GOOD alternative to the touch keypad app?
ive tried alot of others such as
FingerFriendlyFriends
PCMKeyboard
Phone Pad
Touchpal
but none of them are as good/easy to use.
Cheers
smittyofdhs said:
that disbale uutility will screw up your keypad even worse. When it installs, it wipes out the image files used for the xt9 and then you won't be able to uninstall the touch keyboard/pad at all. I would recommend not using the disable utility.
Keep in mind that the Touch keyboad/pad was designed for the HTC Touch device, which doesn't have a slide out keyboard. Therefore the code was never meant to run on the Tilt, at least perfectly. I've tried every variation of the touch keyboad and they all don't work well for one reason or another....
Click to expand...
Click to collapse
hmm, i've had it installed and it working quite fine....
that's about it as far as finger friendly SIPs go
grandpareza said:
hmm, i've had it installed and it working quite fine....
Click to expand...
Click to collapse
it = ???
it = Touch keyboard
it = xt9 disable utility
grandpareza said:
hmm, i've had it installed and it working quite fine....
Click to expand...
Click to collapse
yes please elaborate
"it" being the disable xt9, given that I have the touch keyboard installed.
it may be that you are using the touch keyboard that's already installed as part of the rom, in that case the disable utility probably works. I was using a cab based install of the touch keyboard, one that worked with my tilt fine except for the lost of auto-correct and no word suggestion anymore. When I installed the disable xt9 utlity, it wiped out the images used within the keyboard but still left xt9 installed but in a non-useable way. Then I had to manually remove everything, both the keyboard and the disable util manually because neither would uninstall now....

Word Completion problem

I was wondering if anyone has the same problem as I do. I am using ROM 1.34.8831.1 WWE and my word completion and word correction does not work.
I have tried START/SETTINGS/INPUT/WORD COMPLETION. but it changes nothing.
Comments or suggestions please..
Thanks
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Keyboard
dutch64 said:
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Click to expand...
Click to collapse
I am using the MS keyboard. I will try your other suggestion. Thx
update your ancient rom.
billybobjones said:
update your ancient rom.
Click to expand...
Click to collapse
I am now using a modern ROM and it still does not work... any other suggestions
word completion with block recognizer
Hi
HTC in Australia) support clearly advise that word completion will not work on Touch Diamond when using block recognizer.
Is there anybody out there that can add this feature to the Touch Diamond - even if it is not available on other input methods?
Word completion does work for block recognizer, do as dutch64 mentioned.
Strange...i have exactly the oposite problem
i don't like word completion feature, and so i try all ways to disable it (from settings menu and from Advanc. conf. tool), but i only get it 100% disabled when i use Panosha ROMs ...

Type on phone and compact keyboard display numbers

Bug on my virtual phone keyboard and compact qwerty keyboard : impossible to type letters. Only numbers are displayed. My full qwerty keyboard works.
I had install and uninstall many keyboard like PCM, touchpal etc.
Thanks a lot !
Fafou
My case is worst then yours . All three HTC keyboards are numerics only. But the regular WM SIPs works fine.
Anyone got an answer to that?
Have you tried a different rom? might help...
disable the " Turn on one touch" option and it works again.
Got the same bug, and the only fix is to disable this option.
But you can do a soft reset and enable this option again and it should work normal again.
Havent figued out the reason of this bug yet, but i think it has something to do with editing the contacts.
btw, which hardspl version do you use?
slicker said:
Have you tried a different rom? might help...
Click to expand...
Click to collapse
I think its a bug on the 1.93 wwe roms, got it on every wwe rom except swifts 5.0. But 5.6 got this bug too.
I get the same problem if i have PCM player keyboard installed.
uninstalled it and a reboot fixes it... but i love PCM keyboard.
I'm on 1.37 Nor btw.
I'm using stock 1.93 ROM. full QWERTY was working for 2 week... till 2 days ago. I have reverse all the tweaks I made for the pass few days and it didn't help.
I think I'll try install a PCM trial and see if that helps.
Keyboard now working is a big issue. I hope HTC will publish a hotfix soon.
Installed PCM... all the HTC SIP still not functioning. But the hell with them... I like PCM better now.
Hope some one finds a fix. I want both PCM keyboard and the orignal ones.
Lobo13 said:
I have found a solution. Change this in the registry:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
[/quote]
Works after a reboot on diamond :)
Click to expand...
Click to collapse

Diamond Keyboard problem

Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?

Categories

Resources