how can i get footprint to interact ( work with ) tomtom v7.915, it only seems to want to link with google maps and does not give any link to tomtom ?
Using 4th feb hyperdragon on my kaiser
Try V.7910, works like a charm
It does not work with hyperdragon 4th feb
Anyone even know where v915 looks for photos with gps data, I've read that it looks in 'my documents/my poi' and having placed these directories on both the storage card and device tomtom still does not pick up the pictuers
EDIT
Found the answer FOR THE SAVE LOCATION;
Create a folder named GEO-PHOTOS in ROOT
your SD
Open your camera and take a picture with the "GPS Photo"
Copy your photos in the GEO-PHOTOS
Also to get footprint to launch tomtom in this rom you need to install KDkobes footprint cab
checked and both solutions work
Related
I'm not taking credit for this, as it was other people on this board that showed me the right direction. I'm just making a post with a working version as I have yet to see one yet.
I have an AT&T tilt. This is with the ROM that comes with it. not cooked.
Make sure that you have deleted any other version of TomTom from your Tilt. Make sure you have deleted any old maps and map directories "\Storage Card\My Documents\"
1) Copy the cab over to your card
2) Run the cab
3) Copy your maps over to "\Storage Card\My Documents\". Mine were saved on my computer and called USA_and_Canada_v.675.1409.zip , make sure you are paying Tomtom because stealing is wrong.
4) Run TomTom
5) Go to Change Preferences|Show GPS status|Configure
6) Make sure the selected GPS receiver is "Built-in GPS receiver"
that's it. It should work from then on.
http://www.megaupload.com/?d=13EJMRYH
The cab
it gives me a rom version error. im using the latest htc rom from this site
caztronics said:
it gives me a rom version error. im using the latest htc rom from this site
Click to expand...
Click to collapse
If you are using a non tilt rom, i'd try the cab install that comes with the htc. this one is for the tilt ROM
what version of tomtom is this?
The version number is 6
Can you download the maps?
I don't mind paying for the activation code, I just want to able to download and pay whatever it costs to avtivate the service from TomTom.
Buy Maps online?
Yes! Download and install Tomtom Home to your PC, then click on the link "buy the latest maps" It will show you all the maps available. Note: the price is in Euro and a single, cheapest map is 39.95 Euro. They have USA regional maps (New England_Mid Atlantics, Plains, etc) each cost 59.95 Euro. Hence, it is expensive to buy map online.
Kireol,
Thank you very much! I've been trying to move my maps out of the root of my 4G card for weeks!
I just wanted to say thanks for helping me finally get tomtom on to my tilt. I had been trying for three days and couldnt get it to work. Finally got it to work. Dont know what I was doing wrong but it work. Just followed the instructions and it went like a charm. Maybe I was tired. Thanks a bunch
If you want to add the standard TomTom Voices to your Kaiser after installing this all you need to do is Download & install TomTomHOME from TomTom's website. It will allow you to download and install all of the standard voices.
yup Kyphur is right. also, if you download some free ones, you can just copy them to your \Storage Card\Voices directory.
Here's a site with a bunch of free TomTom voices (I'm using John Kleese):
http://gps-data-team.com/pda-gps-navigation/links/index.php
Follow the free voices sticky.
Also:
The cab from page 1 on this thread works just perfectly on my Tilt flashed with the TyTN II ROM. As part of the installation, you can also download a free city map to play with. It automatically detects the Kaiser builtin GPS.
Very cool software.
I have the AT&T Tilt (Kaiser). When I select the GPS, it does not show the built in GPS. How do I get it to show the built in GPS. I have the TT MKii external one, but if I could use the built in one, it would be even better. Thanks!
I just set it up before seeing this thread and mine didnt say "internal GPS" but only one of the options was not for a bluetooth gps, so I choose that, and it asked me what com port to use, I said Com 4, and it worked fine. I am using AT&T Rom.
But, I would really like to clean up my Memory Card also, so now I gotta see if I can get all the tomtom files into a folder instead of the root of the memory card.
That worked! Thanks! Now I don't have to carry my external TT GPS around...
U R the man!!!!!!
kireol said:
I'm not taking credit for this, as it was other people on this board that showed me the right direction. I'm just making a post with a working version as I have yet to see one yet.
I have an AT&T tilt. This is with the ROM that comes with it. not cooked.
Make sure that you have deleted any other version of TomTom from your Tilt. Make sure you have deleted any old maps and map directories "\Storage Card\My Documents\"
1) Copy the cab over to your card
2) Run the cab
3) Copy your maps over to "\Storage Card\My Documents\". Mine were saved on my computer and called USA_and_Canada_v.675.1409.zip , make sure you are paying Tomtom because stealing is wrong.
4) Run TomTom
5) Go to Change Preferences|Show GPS status|Configure
6) Make sure the selected GPS receiver is "Built-in GPS receiver"
that's it. It should work from then on.
Click to expand...
Click to collapse
kireol,
You are the man!!! I've been fooling with this #@%# thing off and on all day. I've been through countless threads and numerus cab files with all negative results.
After reading your post I tried that cab and it worked fantastic. I picked up 4 satellites sitting in the house and 7 when I went outdoors. I had already tried 6.01 with the US maps to no avail. I just installed your cab without uninstalling and everything worked great.
Thank you so much!!!!! Just wish I'd found your post this morning.
Wow! Very nice!
Thanks Man...
I'm going to get me some maps now...
no problem guys
sometimes I think this post should be stickied heh. even i forget about it
I just bought a 8925 and tomtom 6.203 but i am installing it from the SD card. i cant get it to work at all. i copied the tomtom info on to the sd card and can install it on to the phone but it does not work - says 'no maps found' and it doesnt give me the same options as listed in this post - it doesnt offer to 'configure the GPS select other NMEA GPS receiver Click select' its like it skips that step. i dont know if this is even an issue but locating maps are!
i created 3 folders under the tomtom folder on the SD card - total size is 1.6gb
1. north america 675
2. tomtom 6.2 cab file
3. alternative voices
i've tried to leave the folders in that order on the sd card and also put everything into the tomtom navigation (once it was installed) just to see if tomtom is looking in a direct folder. nothing!
i have installed tomtom to storage card not the device (but i did try that as well and same thing)
Any ideas? any help would be much appreciated!!!!
Sean
Did you read the instructions?
tomtom no maps
figured it out - it was the bluetooth explorer - it needed to be shut off in order for tomtom to work... DONE! no i cant get the voices folder to be recognized - anyone know?
I feel like a dumbass. I purchased navigator 6 and us/canada maps from Amazon and seemingly got quite an old version. I'm running 6.030 software and 660 maps.
hope fully it works is iowa missing?
Hello,
Im having a TomTom 6 problem on my ATT Tilt. I am still running ATT Rom. Nothing has really been severly modded on the phone.
I am trying to disable the autostart function on TomTom when I soft reset or insert the micro SD. I have read several posts and tried everything I have seen.
Such as...delete the autostart.exe file, rename the autostart.exe file, delete the 2577 folder, rename the 2577 folder, encrypt the 2577 folder. All of these actions have stopped the autostart feature, however when TomTom is opened, it comes up NO MAPS FOUND.
Any help is appreciated.
gomo187 said:
Hello,
Im having a TomTom 6 problem on my ATT Tilt. I am still running ATT Rom. Nothing has really been severly modded on the phone.
I am trying to disable the autostart function on TomTom when I soft reset or insert the micro SD. I have read several posts and tried everything I have seen.
Such as...delete the autostart.exe file, rename the autostart.exe file, delete the 2577 folder, rename the 2577 folder, encrypt the 2577 folder. All of these actions have stopped the autostart feature, however when TomTom is opened, it comes up NO MAPS FOUND.
Any help is appreciated.
Click to expand...
Click to collapse
is this the purchased version? or did you download some torrent? sounds like it is a torrent but if it was purchased ask for your money back because there shouldn't be a 2577 folder, at least i didn't get one.
I recommend searching tomtom 6032 cab. Install this cab and delete everything else except for your maps from your sd card. After you have that installed you need other software like gpstest, gpsrouter, and quickgps to get tomtom6 working efficiently on your tilt. Here are the steps I have to do:
1)gps router com 4 baud 4800 (this opens your gps system)
2) gpstest basically finds gps satelites
3) open tomtom6
4) open quickgps test and download updates
if tomtom doesn't work after this close tomtom and repeat steps 3 and 4. Also you may want to play around with different settings such as "other nmea gps receiver" set at com 4 baud 4800 and "built-in gps receiver".
Ya its not purchased version. I have several friends with it and they do not have the same problems. However their phones are unlocked, i dont know if this makes a difference. I am using quick gps to keep my GPS location current, and i have GPSgate from franson to turn on the GPS for TomTom. The TomTom program functions normally, everything seems to work except for this autostart feature. Is the .cab you are talking about a free download? Is it a full version? Thanks for the info.
Renaming autostart files will be sufficient.
Some people have downloaded Tomtom legally for the TytnII or have it as an installed file / on the CD with the phone.
This version of TT is a taster version and does not come with any maps !.
If TT cannot 'see' any maps, check that the maps are within the SD cards root directory, if not, then this is the cause of your problem.
Renaming autorun will not 'mess' with the maps ... renaming autorun is often a necessity if you install iGO and TT together as both have autorun files - and iGO does not like it's autorun being renamed
I have tried renaming the autorun.exe but when you open tomtom there are no maps. I have no idea how the two are connected. The maps are in a folder called north_america as soon as i explore to my SD card. also i am not familiar with that iGo program, what does it do?
The autostart & the 2577 folder are part of the installation of TomTom for PocketPC (the software, not the maps). I believe there are several files & folders on the memory card that may be safely deleted. (I deleted them after installation, and am not having issues)... Of course, because I deleted them, I can't check which ones there were, unfortunately. There should be an AutoStart.something or other, an TTN.cab, an autorun.exe, and the 2577 folder that could be deleted after successful installation.
After you successfully install TomTom, you need to start up the program itself, and activate the maps, then the software should see them...
Jeremie
(edited for clarity)
I just got another Tom Tom Map. I had a previous one that was given as a free download. I placed the new map in the same folder. But when I start Tom Tom and go to change maps I do not see it. All I see is the original map. Where exactly should I be placing this new map? What am I doing wrong? Any help would be appreciated. TIA
Anyone Anyone?
Hi there,
Place each indvidual map folder under My Documents on Storage card. Each map must have its own folder eg. IBERIA, SOUTHERN AFRICA, etc etc. Then TomTom will pick up the new map.
Hope this helps.
Regards,
MAC
I have had both TomTom 6 & 7 running on my Kaiser and in both cases the maps were stored in folders off the root on the storage card - e.g \United_Kingdom_and_Republic_of_Ireland_Vxxx.xxxx\
FuSchnickens said:
I just got another Tom Tom Map. I had a previous one that was given as a free download. I placed the new map in the same folder. But when I start Tom Tom and go to change maps I do not see it. All I see is the original map. Where exactly should I be placing this new map? What am I doing wrong? Any help would be appreciated. TIA
Click to expand...
Click to collapse
what i did is i actually just loaded the Map folder to my Storage card. clicked and dragged and it works like a charm. also when i set up my TT7 i installed it to my storage card instead of the device (i dont know if that makes a diff) but it seems to save my settings alot better when i am flashing my rom. so i dont need to reset my home address or anything
I found that most of my map folders end in the text ....MAP i.e.
Australia_Map
Great_Britain_ Major Roads_of Europe_Map
Deutschland_Map
etc.
All in the root directory of the SD card.
I have managed to get TomTom 7 working by putting the maps in the 'my documents' folder, but I have a problem with the dowloaded POI's.
They install from TomTom Home ok, but they do not appear on the Diamond.
I have no trouble installing voices from the Home.
Another problem is that the safety cameas do not show up on the map..but they appear when driving.
Can anyone tell me the folders each thing should be put into...e.g. safety cameras, poi's, voices etc, also some files are TLV, and some are TOC...which ones should they be?
Many thanks
POI's: place "yourPOI's.ov" and "yourPOI's.bmp" inside the map folder.
Voices: place voice file "data##.CHK" and "data##.BMP" in folder Voices.
I don't have safety camera original available from tomtom so I don't know about it; but I have some red light camera file save as POIs. If this is your case, it should be treated as normal POIs. Be sure to set "warn when near POI" and "Warn only if POI is on route."
You may try to check options "Points of Interest" when "Browse map of route"
Note: I save all tomtom voices, schemes and maps folder in the root of the storage card because I have Raphael (aka FUZE, Touch PRO.)
Thanks Nghiem, but my poi's are all TLV files, and TomTom Home put them in a poi folder. Maybe the file and program structure is different in TomTom 7 ?
Also the only reference to poi's in my map folder is a file called poi.dat..all the existing poi's work ok, its only the ones that are downloaded by TomTom Home that don't work
Can anyone shed some light on this?
many thanks
I have tomtom since they made tomtom 5 when you could purchase and run it for PDA legally in U.S Right now I have tomtom 7.xx and maps version 8.30.xxx. The "poi.dat" you see inside map folder is the original POI's from tomtom. All others POI's format are *.ov. and it can be downloaded extra via tomtom Home. I download and install some of them e.g "Haunted_Hotel.ov2" without any problem.