I need help I've tried some many things to fix this problem and searched also, to no avail, And I'm hoping that someone here could help. My tilt has been running fine, but recently when i restart i get a gx.dll message saying
"there is no application associated with "gx", run the application first......"
Ans this is on start-up , i even went and all my itemes out of the start up folder in windows, to no avail.
Thanks
hard reset.
I've noticed this same file popup in my start menu here and there on my Tilt. I think it is created by a program file. Maybe one running out of the start menu folder directly, unlike a shortcut. Maybe a program file put in your startup folder? I just hypothesize.
Related
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
I had installed all the components of Cube from the thread
http://forum.xda-developers.com/showthread.php?t=343583
The cube worked fine for me except whenever I soft reset my phone the quick dial screen would be the first screen available and not that HTC home which was the defualt screen
When I unistall all the components and restart the Phone I get a screen with the X mark at the top right corner and busy icon.When I cancel the screen I get the default HTC home screen. Is there some component still left even after uninstall.
My WIndows/startup/ has
poutlook
btdwake
VCDaemon
QuickDial(tried deleting it manually but did not allow)
Regards
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Dr. Strangelove said:
What was the error when you tried deleting the QuickDial file? Did you use your PPC File explorer or did you try it via Windows Explorer?
Click to expand...
Click to collapse
The Error I get when I tried to deleted QuickDial is that it Sharing voilation.The source or destination maybe in use.I am using the file explorer
You need to terminate the 'Quickdail' process. Do that by using this tool:
http://www.4shared.com/file/39875406/cd2a63e3/Alltheway_Task_Manager.html
As you can see, Task Manager by AllTheWay.
Terminate the process using this file and then move the file from the startup folder. Move it, because you want to keep it somewhere safe if other programs/functions start to fail as a result of your actions. Or simply reinstall the Cube if additional problems should occur. Choice is up to you.
After moving or deleting the file, soft reset and see if that problem got fixed.
Good luck!
Hi,
I've instaled IGO8 the other day, but for whatever reason mine phone decided to soft reset during instalation. It might have been my fault as I usually do something elese on the phone while installing sits in background.
Anyway, after the reset I was able to run IGO but it closed after I have inputed adress to it. The error said that map.(can't remember the extetnion) was missing. I figured out that because of soft reset during instalation I haven't had all files in IGO.
I couldn't uninstall it from remove programs so I deleted it with tcmd, as well as the files in windows (there where couple of them assigned to IGO) but couldn't find any registery entries for it (using TCMD).
Now every time I try to install IGO, cab says that I have it already and does not install anything apart from the files that go into windows.
I know that I need to delete everything that IGO left on my kaiser off the system, but i don't know what.
I don't want to start hard-reseting just yet.
Thanks in advance.
Check your 2577 dir and delete all iGO stuff in the programm folder.
Use memmaid to REALY uninstall it and check reg.
Switch off phone, pull SD, switch on phone with valid 2577 dir and it should install.
Your 2577 should look like (see attached)
Heres a strange one.....
Just recently tried to sync my MDA Compact 4 and got the following error message:
"Synchronization cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft ActiveSync Troubleshooter in Microsoft ActiveSync Help on your desktop computer."
On investigating further, i tried the following suggestions:
- Turned off all firewalls
- Removed partnership between phone and pc (on both the phone and pc)
- Unchecked "Enable advanced network functionality" in USB to PC settings on the phone
- Reinstalled Activesync 4.5 (and also a tried a repair)
- Different USB cable and USB port (not using a USB hub)
- Several soft reboots
and finally tried a different PC just to see if i could get a guest partnership! Guess what? Same error message.
I am, however, able to explore the phone with activesync but only explore. I cant change file names, add files or delete.
On even further investigation, i've now also discovered that i cant delete/ rename files on the phone itself (using file explorer on either the device or internal storage). When i do, i get the following message:
"Cannot remove/ rename etc: Access is denied.
Be certain that the folder/file is not write-protected and is not currently in use"
(Even creating a new folder and then immediately trying to delete it gives the same error)
If i connect the phone to the PC as a disk drive though, i am able to delete files just fine. Add new files, rename them etc....without any problems.
This leads me to believe that the problem is with Windows Mobile!?!
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Any help would be greatly appreciated.
Thanks
UPDATE:
I found this on the Microsoft help forum.
Although it hasnt fixed my problem, it might help someone else who is having the same problem.
1) soft reset device
2) Start / Office Mobile / Word
3) Create a new document (click on New)
4) type some text (just plain text - no formatting - it was 'plain text document') just a few characters
5) File / Save As...
6) I have selected type 'Plain Text'
7) It asked me whether I want to save it at 'Word document instead' - I clicked No.
8) I have powered off the device and did soft reset
9) Start file explorer, find the file (it was in My Device / My Documents), click on it - it opens Word again.
10) Add some formatting (I have selected part of text and changed font to bold)
11) Close Word - it asked whether to save it in Word format - this time I said Yes
12) Power-off the device and press soft reset again
Also, i noticed that i am able to modify any DOCX or TXT file within Mobile Word (and even delete them) just not from File explorer on the device or Explore within ActiveSync.
Can anyone help???
Same problem with different model
sh00ter said:
Heres a strange one.....
Has anyone else experienced the same/ similar problem and figured out how to fix it? (Other than perform a HARD reset/ Clearing the storage)
Click to expand...
Click to collapse
You're not alone. I have HTC Touch Pro (ie. Raphael) with exactly the same problem and I've also already tried that "Word-solution" several times without any help. However I can synchronize with my exchance server via 3G. I can also add/remove/rename files if I use some of the Office mobile applications, but not with file explorer.
Getting sooooo frustrated, but still not willing to do the hard reset.
Do both of you by any chance have Fsecure Mobile installed? Just trying to narrow the cause for the problem.
Same Problem Here
I have a T-Mobile Wing and I'm having the exact same problem. Anyone figure out whats up yet? It's so strange that I can delete/remove files and folders through active sync, but I can't through the device file explorer. I have also tried creating a folder with the file explorer, but then I cant delete, move or rename it.
Here's something that might work for you, http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
Unfortunately it hasn't work on any devices that I've seen but then again, I'm still thinking that F-secure mobile is causing the problems in our devices. F-secure has confirmed that they have heard about the problem and are investigating it.
This is very interesting as in the past 24 hours my Xperia X1 has started to do the same, I can create files ok but am unable to remove/copy files.
I am using f-secure mobile security, so it would seem there is an issue there. I'll fire an email to them to get myself on a fix list when it comes out if that's the problem!!
Any news on this issue?
I am using a trial version of F-secure mobile (on my SE Xperia, a sort of HTC ). Now, out of the blue I am experiencing similar problems:
- not able to connect to pc via Active Sync
- not able to delete/rename/copy files on both internal as external memory
- programlist appears empty
Did anyone try to remove F-secure to solve the problem?
Thanks.
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Meiz- said:
I just got a reply from F-secure. They have identified the problem and are expecting to release a new version of the client within next two weeks.
Hopefully that's the end of this...
Click to expand...
Click to collapse
Updated client was published on last friday.
I am experiencing a very similar problem on my HTC HD2 with wm6.5. If I connect the phone as USB mass storage i can copy files as much as I want to on the SD card, however when I disconnect the cable after copying WM6.5 cant read the folder sometimes.
Othertimes when I connect the phone as Activesync and start to copy some files, it stops half way through, sayign "access is denied". if that happens I cant transfer any files anymore, it will always give same error until some time passes, few disconnections, restarts, no consistency, no definite workaround. The strange is when it gets into this "access is denied" mode I can still browse the device (storage card) and create and delete folders. very-very frustrating.... did a few soft and hard resets, reinstalled activesync couple of times, still no joy...and i dont have any FW app on my device...
thanks.
A few months ago, I installed the CUBE. I uninstalled it a while back. Ever since then when I do a hard/soft reset, when the phone comes back online I get the following error:
"The file 'FTtouchFlo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file."
Also, when I go to Start --> Programs...I have 3 SCLPF folders, each with Cube Settings Icon inside. There is a SCLPF settings folder as well. I can't delete them, can't find them in a search (on the phone or through active sync). The cube and TouchFlo are not in my "remove programs" settings either.
Can someone give me a clue? I want to get rid of these folders and the annoying pop up error i have been receiving upon start-up. Thanx in advance for your help!
I've got the same Problem, dosen't anyone know how we can delete this Problem?
At first Sorry for my bad english
you most likely have an entry in your startup folder for FTouchFlo:
Check here:
C:\Windows\Startup\