Related
Hi.
I would like to know if anyone has the CAB files for the Connectionsetup 1_5_35082_1.
All i know is that this Connectionsetup is available in the "HyperDragon III OPAL OS 5.2.19971 B. 19971.1.2.6" ROM, but i couldn't get them from there.
This connectionsetup has the configurations for Brasil's Phone companies.
Thanks in advance,
Carlos
Did you find the file?
I'd like it too.
Is this what your looking for where it asks you your provider then sets up the connection?
-McMex
Yes, but this is version 1.0
And I think it's corrupted.
Corrupted you mean from the upload? I have never had a problem with it. if you think its the file I will reupload if its to old sorry.
-McMex
Here's the closest I have, its 1_5 but a little different number after that. This is the one from -888- rom cabs.
No, something strange
mcmexican said:
Corrupted you mean from the upload? I have never had a problem with it. if you think its the file I will reupload if its to old sorry.
-McMex
Click to expand...
Click to collapse
When I installed it, and got to the screen where I'm asked where to install the app (device, sd card), the application name was not the same as the file, but rather something like "your application name" (and that's how it appeared under the start-settings-system-remove apps).
Further, when I ran the app, the list of countries and cell operators was empty, and then I received a strange error message.
So I uninstalled and reinstalled my v1.0 copy.
Thank you, I'll try it out
showaco said:
Here's the closest I have, its 1_5 but a little different number after that. This is the one from -888- rom cabs.
Click to expand...
Click to collapse
Do you also have the bluetooth cabs for the latest AT&T WM6.1 ROM? (or from any other ROM that uses them).
The NATF ROM I'm using doesn't show the services tab.
I also need the BT explorer cab.
Thanks.
Hi to all!
I want to know if is possible to have a Cab with the social networking engine from blackstone (Upload to facebook and youtube).
I Think that it's not impossible but it will update ManilaAlbum...
I know that only 2 roms have this function working (Dutty and UDk) but it will be great if everyone could install it...
No one knows?
*Bump*
I'd like to know if its possible to get the updated versions of HTC Album as a seperate installer also rather than having to flash a Rom which i'm a bit reluctant to do.
the social network engine is not only in htc album... it has a package for windows mobile too... I hope someone put a cab with all the necessary things...
Does anyone have this cab?
Bump bump bump
Da_G posted a cab in his raphael rom thread. Click on the paper clip to find it.
Umm, facebook didn't work for me. check it out.
ive just tried the edited gab from the thread suggested above and im running stock 1.93 rom and it works perfect for facebook and its quick!
thanks for all help everybody and especially DA_G for his work
you were able to make facebook work?
I couldn't, what phone are you using? on what network? did you put any special settings?
hoyler30589 said:
ive just tried the edited gab from the thread suggested above and im running stock 1.93 rom and it works perfect for facebook and its quick!
thanks for all help everybody and especially DA_G for his work
Click to expand...
Click to collapse
what do you mean edited cab?
hi im using a orange uk diamond but running standard htc 1.93 rom with .net 3 not sure if that makes difference and i installed the cab attached which was created by DA_G himself
i then restarted the phone and now ive got mobile uploading working perfect for facebook from album
Does this work for Sprint HTC touch pro? Was posted at wmpoweruser that it was not working on it: http://wmpoweruser.com/?p=2188
any updates?
im not sure it works on my diamond as said earlier ive got 1.93 rom and compact .net 3.5 but it works perfect after installing that cab
I have a fuze, and am running Da_G's rom, and it wouldn't work.
just installed and tested, I am getting a Login Error : There was a connection error while attempting to login.
do i need a custom rom... i thought this was made for the oem rom?
This is in the themes section
http://forum.xda-developers.com/showthread.php?t=469106
works fine on my stock 1.93 rom
chrisd1a1 awesome, thanks for the link!
villa_bryan said:
you were able to make facebook work?
I couldn't, what phone are you using? on what network? did you put any special settings?
Click to expand...
Click to collapse
Hi, I'm on UK T-Mobile and I cant get it to log into my facebook account, keep getting login error........ any ideas why this is? anyone else experiencing this? I am using Morna 1.7.1 (which I must add is an excellent ROM... very fast!).
Thanks
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
I guess I will be the first to test this on 6.5.....
UPDATE:
One word....Brilliant
Thank you so much. I had this when we were in the 1.93 ROM days but then lost compatiblity with the newer ROMS.
This Restored it back...GREAT
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
chgrbt said:
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
Click to expand...
Click to collapse
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
MikaelG said:
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
Click to expand...
Click to collapse
On another "Rogers" thread, it was pointed out to me that this solution would only work if my "ROM has been patched to supported unsigned drivers", which is something I don't know.
See the thread:
http://forum.xda-developers.com/showthread.php?t=347882&page=33
I am actually not using the stock radio rom provided by rogers.
I updated my radio rom to 1.09.25.23
I'm not sure if Dutty in his rom has set the setting for unsigned drivers.
As far as I know, this worked, and was only on a software basis... I've been following the other thread about the raphael and it seems Captain_Throwback only did changed/added some Registry settings to make it work.
On that note, the rilphone.dll was taken out directly out of rogers original rom (the rom that came with the phone)
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
can someone getting working for D2 please
jasonchewy said:
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
Click to expand...
Click to collapse
I installed it on Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]
So I don't know? It should in theory work.
or you want to try something like this. You need to have data plan to make it works.
http://www.truecaller.com/
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
My guess is that no... but if you're willing to try.. the worst thing that can happen is that you will have to hard reset your phone, but at least if you do try and it works, i mean it can help a lot of people.
a in yul said:
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
Click to expand...
Click to collapse
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Finally! Works perfect although many names have an extra "@" sign lol
CNAP working
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
chgrbt said:
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
Click to expand...
Click to collapse
You can use diff radios with the CAB, but just that sometimes functions in the radio arent implemented in the rilphone.dll which kinda sucks.
For now it will take time until rogers releases another windows mobile phone, so... my opinion is that we're going to have to wait.
Damn rogers.
Concerning the @ sign, it's normal, it just means that the name is longer than what the phone can take.
Has anyone tried this on a tilt with a custom ROM? Tempted to try this...
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Thks for the work to all;
Matt1408 said:
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
Click to expand...
Click to collapse
Just logged on and checked; thanks a bunch; have it working on my tilt on FIDO..!!
super news..!!
Thanks for all the good work! This not only fixes my caller display problem, it also fixes my SMS timestamp problem! Now all incoming SMS's are correctly timed!!!
Rogers Name Display for WM6.5 HTC HD2
It doesn't work for WM6.5 on my HTC HD2, can somebody share rilphones.dll from WM6.5 Rogers/Fido device with me?
Anybody extracted all the cabs already?
Especially interested in the Manila version and all the AT&T add-ons.
Thx
wait. you actually want the att bloatware?
also, the tf3d stuff is only slightly optimized, if you're running any of the manilas out there that are updated recently, it should perform better.. especially if you actually use wm6.5
Yes, the bloatware incl. Manila to rewrite/update my Fuze setup guide.
I admit that I'm a little bit reluctant to flash my phoen back to the latest ATT since I kinda depend on it for the next two weeks and cannot run the risk to wreck it at this time.
i c... I can provide you the set up file, but I have no knowledge of how to extract it. If you are interested, send me a PM and i'll see if i can upload the link for you.
EDIT: the official update is actually really good. especially the radio. my gps fix is very very fast, and my battery life is great.. even with push..
I can download the EXE from HTC/AT&T myself but would need to install to copy all cab files under the Windows directory.
If anybody has all the cabs which reside after an install (better a de-böoated install) would be great.
The success with the GPS and good lock is simply related to the Radio bundled with the new ROM which is/was available at XDA for some time. Sure, for a branded ROM it was finally time to fix these issues.
yeah, i did mention that the radio was why the gps is so much better. I'm just a sucker for going around flashing new radios... It got to be so much of a hassle keeping track of them that I gave up..
anyways, sorry I can't help you there in terms of the cabs since I'm very uncomfortable with doing stuff like that since I'm paranoid about my phone numbers and notes tagging along..
but I can say with confidence that the new update is really good and you should not be worried about flashing the new rom at all. The only thing is that I see you are using energyrom so i understand that you don't want to flash back and forth.
Can you take a look in your Windows dir and name me the CAB files there?
Most common none is deleted after install so that list could be helpful already.
NRG ROM ... well ... it ROCKS.
I'm not such a fan of 6.5 yet thus running the older NRG 2.0 without ANY problems.
sure! that I CAN do.. here's the list (btw, my rom is unbloated so i might have all of the cabs..)
BlockBreakerDelux_105_signed.cab
DD2_GM_signed.CCAB
GetATTNavigator_NoTestAccount.CAB
GetMail_2008030_signed.CAB
HTCAP_Service_ATT.CAB
Java_Preloads_20090422_signed.CAB
JQ2_0-1-0_20080905_signed.CAB
MidnightPool3D_200801022_signed.cab
MobileBackup_1.0.1_signed.cab
MobiTV.3.0.4.68563_signed.CAB
mobivj.3.0.4.75845.CAB
Move_camera.cab
MSFT_SecurityPolicyWorkaround.cab
MsPacMan_20080910_signed.CAB
MusicID_1.3.25_signed.CAB
musicync_2_0_0_signed.CAB
PPC5.0 HTC COKE ATT.CAB
PT_BlackSCR.CAB
PT_Manila_REG.cab
removeHiddenProxy4CWS.cab
restoreHiddenProxy4CWS.cab
Sudoku_0.11.66_signed.CAB
WM6_PPC_HTC_Opera9_WWE.CAB
XMRadio.4.0.4.68563_signed.CAB
that's about all I see.. I might have some typos in the numbers but hopefully they should be all correct. Good luck and if you need anything else, just holler.
Cool mate! ... and this is from the latest AT&T ROM upgrade?
Would you mind to copy all the cabs to your PC and zip them in one humongous file? Check PM
i can do that provided that it isn't locked in by the OS. I'll do it later when I come back.
Thanks, check your PM (Private Messages).
Sorry to interrupt, but here you go:
http://rapidshare.com/files/249085596/CABs_from_New_AT_T_ROM.zip
Manila is not installed from CAB, so I created a CAB for it.
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
tyguy said:
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
Click to expand...
Click to collapse
Actually, you don't need that CAB. It is installed during Initial Configuration, and it adds the registry entries that start TF3D on boot. However, I added the required entries to my TF3D CAB.
Hey NATF....what happened to the OzIM cab? I was curious about this thread because I wanted to know if there were a new version of the cab for the instant messaging package as well....or did you just leave it out because the version didn't change in the new ROM perhaps?
[Q] [ROM+KITCHEN?+INFO] T5388++ / S650 / Diamond 2 Clone -> Comatose problem solved!!
Hello, I opened this thread for the T5388++ (S650, 480x800 WVGA dual sim) because the other thread for the clones has over 100 pages. The models are very different and need different procedures (including the roms are different format) and also have different problems.
I have a T5388++ and I was desperate (a lot of another users too) because the comatose problem is an extremely serious problem, at any time phone dies, and when anybody call he hears signal, but the phone not sound or show anything.
I've tried to change roms, I've tried changing the temperature, I've tried changing the sims (with and without) ... three months of tests to nothing ... the phone was falling into a coma randomly, but ...
Last week I found a new ROM cooked in a Chinese forum by a chef who made a lite version with old xip (for reasons of space and stability) and I tried it ...
FANTASTIC!! (Verified to be a software problem and not hardware, FIVE DAYS continuosly, if you don´t believe me, please try it) I think that this rom is a great discovery.
It never crashed, NEVER. Everything is perfect (not all, some minor bugs) ... but ... :-( it is in Chinese ... I only can use things that I know by icons (call, sms, contacts, basic config, ...) I've talked to the creator of the rom and tells me that he can not translate because he does not know English, he only do Chinese cooking and he could not tell if it is properly translated or no.
Searching the web I found a site where they have a rom kitchen for viva model, a processor-based Hisilicon K3 (which is which carries the S650, T5388 + + for friends), and I've tried to do modifications with MUI English files (I made dump, made the packages, etc ...), but I only get corrupt rom, IDT flashes it, but phone doesn't boot, only can boot in download mode to change rom again. I can not go further. I can´t say if this kitchen is correct for this model or not.
I call chefs for help, this rom is irreplaceable, is the ONLY real stable rom that I've found (I tested over 50 different roms, different languages and Windows versions, and a lot of users report same error in a lot of forums) and I think it is worth translating.
Does anyone want to try to do a translation? If you know but you do not have a phone available to test, I will test and I will take the risk, no problem.
This rom should deserves a generous donation because it corrects a major problem with a phone that is VERY good (dual sim, great battery life, high resolution, high sensitivity, fast, good sound quality ...)
Teachers, what can you do?
I put the links and the kitchen (supossed that kitchen is correct for this model).
Link forum to creator (say thanks to him there, he is a great cooker) Google chrome translates it fine
h$$p : / / bbs.592zn. com/viewthread.php?tid=96515&extra=&page=1
Links to rom
h$$p : / / disk.592zn. com/viewfile.php?file_id=280&file_key=arr1Mrcr
h$$p : / / disk.592zn. com/downfile.php?file_id=280&file_key=arr1Mrcr
password rom = 592zn.com
Kitchen viva explanation (Chrome again)
h$$p : / / products.mobileuncle. com/thread-5011-1-1.html
Link to kitchen (I am not sure if it works, I attach it)
h$$p : / / www .brsbox. com/filebox/down/fc/40b649794685cc8f03e0f5923b8e0565
Thank you very much.
Best regards.
I can do it, but in a few weeks. Right now, I don't have the phone with me. I'm still waiting to receive it.
I've managed to dump the ROM successfully and rebuild it using a new 0409 SYS.
Are you able to wait until my phone arrives? Otherwise, I can provide you the new ROM and flash it at your own risk.
EDIT: Can you tell me the WM build and the manufacturer version of that ROM?
EDIT2: Well, it appears that this ROM is based on 21911.
Hello, I'm from portugal too and have the same problem the version of the wm is:
- 5.2.23090 build 21911.
ROM: C03.021.01
Can you tell me how can I dump the rom so I can edit. Put some software in it and alter the language.
I'd love to learn to do it.
And I have i phone to test it.
T5388++ rom : Chinese -> english
bgcngm said:
I can do it, but in a few weeks. Right now, I don't have the phone with me. I'm still waiting to receive it.
I've managed to dump the ROM successfully and rebuild it using a new 0409 SYS.
Are you able to wait until my phone arrives? Otherwise, I can provide you the new ROM and flash it at your own risk.
EDIT: Can you tell me the WM build and the manufacturer version of that ROM?
EDIT2: Well, it appears that this ROM is based on 21911.
Click to expand...
Click to collapse
Hi, of course I can wait, I also I can try your rom but how did you do to change language of T5388++ specific applications? (phone dial, sms and mms menus, camera, wireless manager, rotation screen, etc... standard WM apps don´t work in dual sim) I suposse that is needed change all of that executables by english versions of that. Take an english ROM (for example solonomi english rom), dump it, and replace chinese specific files with english files without touch system WM files, only MUI version. Is that what you did?
If you upload your 0409 version of 21911 I will try it. (Rapidshare, megaupload, etc...)
WM version is: 5.2.23090 and 21911.5.0.94
Hardware version is: 3.21.99.1310720 (number of version that shows IDT)
(I saw that IDT shows different numbers with different roms, all roms that I tried and work, have same last number: 1310720 but first digits change, most common is 1.1.1.1310720)
By the way, rom has several minor bugs:
- Battery button doesn´t works
- App that shows rom version and hardware revision (in configuration panel) doesn´t work
- App to record conversation doesn´t work
- App to reset/power by soft doesn´t work
- Specific app to configure name and functions of each sim (in user panel) doesn´t work
- Specific app to configure data connection (in connections panel, configure if phone uses sim1 or sim2) doesn´t work
If you can identify and fix some of this bugs, it would be perfect, but I suposse that it´s complicated without a phone in your hand to test it.
Thank you very much
Best regards
manueldg said:
...but how did you do to change language of T5388++ specific applications? (phone dial, sms and mms menus, camera, wireless manager, rotation screen, etc... standard WM apps don´t work in dual sim)
Click to expand...
Click to collapse
Those apps also have the .mui file for the english language. The only change needed is in the SYS itself, just a matter of replacing SYS from CHS to ENG.
manueldg said:
By the way, rom has several minor bugs:
- Battery button doesn´t works
- App that shows rom version and hardware revision (in configuration panel) doesn´t work
- App to record conversation doesn´t work
- App to reset/power by soft doesn´t work
- Specific app to configure name and functions of each sim (in user panel) doesn´t work
- Specific app to configure data connection (in connections panel, configure if phone uses sim1 or sim2) doesn´t work
Click to expand...
Click to collapse
Ahhh, I thought you would say that. When I cooked a new ROM using a COM2 build (which is the case here with build 21911), I've noticed that problem. It seems to me that those apps were developed to work with newer builds only (from COM3 or COM5 branches).
You may be wondering why I say that I can do it, even if I don't have the phone right now. Well, I had the phone, but I had to send it back to the supplier due to a problem with the power button. When the phone was in my possession, I successfully flashed my own cooked ROM, so I know it works. I didn't have the chance to fully test it but didn't experienced any SOD.
Ohhh I see that you are a great chef, really.
Ok, when you have time upload your cooked rom and I will try it and I say you what happened.
By the way, what´s the meaning of SOD? (something of death
manueldg said:
By the way, what´s the meaning of SOD? (something of death
Click to expand...
Click to collapse
SOD stands for sleep of death. I guess that's the comatose that T5388++ users refers.
Obrigado.
Boa noite
bgcngm said:
Those apps also have the .mui file for the english language. The only change needed is in the SYS itself, just a matter of replacing SYS from CHS to ENG.
Ahhh, I thought you would say that. When I cooked a new ROM using a COM2 build (which is the case here with build 21911), I've noticed that problem. It seems to me that those apps were developed to work with newer builds only (from COM3 or COM5 branches).
You may be wondering why I say that I can do it, even if I don't have the phone right now. Well, I had the phone, but I had to send it back to the supplier due to a problem with the power button. When the phone was in my possession, I successfully flashed my own cooked ROM, so I know it works. I didn't have the chance to fully test it but didn't experienced any SOD.
Click to expand...
Click to collapse
Sorry to bother again, but can you explain how you can cook a rom for this china phones?.
I just see tutorials for genuine HTC, none for Clone.
Can You please explain.
Thank you for the time.
Kitchen clones
ffiesta said:
Sorry to bother again, but can you explain how you can cook a rom for this china phones?.
I just see tutorials for genuine HTC, none for Clone.
Can You please explain.
Thank you for the time.
Click to expand...
Click to collapse
Did you read the bat files that are in the kitchen that I post?
In that bat files, you will find some information, but I suposse that is no correct, because I followed it and I got dump ROM and built again, but phone didn´t boot.
But I think that files are fine to learn, and try to get a finish img-new.nb0
bgcngm could you explain us what steps do you follow to get a working ROM?
Thank you very much
Best regards
PS.- NOT ALL CLONES follow exactly same steps, HTC is only one brand, but clones are a lot.
Thank you for the explanation.
I have a T5388++.
I've been testing the rom and for me it makes for 2 times SOD since yesterday.
Did you try chinese rom???? Did you have 2 SOD with chinese ROM, without any other software installed?
Yes with chinese rom, the only thing it is installed was SPB Mobile shell so it was easy to move in the phone.
Do you think is SPB
I don't know the cause, but I verified that is something related to stand-by and on/off screen and unlock buttons, because the core of the system is working (you call to your own phone and you receive signal).
Please, verify that you have installed 5.2.23090 / 21911.5.0.94 by:[email protected]
and then go to Configuration Settings (gearwheel icon) -> System (windows logo icon) -> Restore complete system (a trash with arrow icon) and type "1234", finally push in bottom left button
With that you restore your rom (or you can reflash it if you want, it is not enough uninstall SPB) and try it a couple of days, I have it installed several days without problems and I tried WIFI (perfect), bluetooth (perfect), mail subsystem (perfect), internet explorer (perfect)... without any SOD.
Best regards
Ok, thank you, before i read this message i've done that, and will try without any software extra.
I have just one question, if you know how to solve this problem I have.
Im the t5388++ the tinanium has one plug-in that it come with the phone Cnetwork.
When I put new plug-ins this plug-in desapear, but he still is in the registry.
Do you know how to put it back, without doing a hard reset.
ffiesta said:
When I put new plug-ins this plug-in desapear, but he still is in the registry.
Do you know how to put it back, without doing a hard reset.
Click to expand...
Click to collapse
Use CHome Editor to activate that plugin again.
Hi bgcngm, did you upload your cooked rom to try it?
Sorry manueldg, but I didn't had time to do it because of work. Maybe this weekend.
ROM Cooked
Oh, thank you very much.
Happy weekend!