After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
I guess I will be the first to test this on 6.5.....
UPDATE:
One word....Brilliant
Thank you so much. I had this when we were in the 1.93 ROM days but then lost compatiblity with the newer ROMS.
This Restored it back...GREAT
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
chgrbt said:
Thanks for sharing D0MZE and thanks to Captain_Throwback.
Do I need to be running the original Rogers 1.00.25.06 radio too? Hesitant to try...tried a couple months ago using another method...didn't work and had to hard reset...
Click to expand...
Click to collapse
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
MikaelG said:
Same thing for me! I'm a using HTC stock ROM with the original radio and I already tried something in the past and the radio stop to work, I had to hard reset.
Click to expand...
Click to collapse
On another "Rogers" thread, it was pointed out to me that this solution would only work if my "ROM has been patched to supported unsigned drivers", which is something I don't know.
See the thread:
http://forum.xda-developers.com/showthread.php?t=347882&page=33
I am actually not using the stock radio rom provided by rogers.
I updated my radio rom to 1.09.25.23
I'm not sure if Dutty in his rom has set the setting for unsigned drivers.
As far as I know, this worked, and was only on a software basis... I've been following the other thread about the raphael and it seems Captain_Throwback only did changed/added some Registry settings to make it work.
On that note, the rilphone.dll was taken out directly out of rogers original rom (the rom that came with the phone)
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
can someone getting working for D2 please
jasonchewy said:
Does this not work with Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]?
I installed it and doesn't seem to do it.
Thanks
Click to expand...
Click to collapse
I installed it on Duttys 5.2.20764.1.4.3_V4_Full_MSVC [2.03]
So I don't know? It should in theory work.
or you want to try something like this. You need to have data plan to make it works.
http://www.truecaller.com/
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
My guess is that no... but if you're willing to try.. the worst thing that can happen is that you will have to hard reset your phone, but at least if you do try and it works, i mean it can help a lot of people.
a in yul said:
will this work on other htc wm phones; ie tilt on TOC 6.5; or tytn on wm 6.1??
Click to expand...
Click to collapse
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Finally! Works perfect although many names have an extra "@" sign lol
CNAP working
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
chgrbt said:
CNAP on my Diamond with Roger's Wireless network is working for me after installing this rilphone cab. Thank you D0MZE, Captain_Throwback and the other contributors.
I have found that generally after flashing a new radio, I need to re-install the rilphone cab for the caller name to show up in the call history list. Also, I have assumed that in order to keep the Roger's CNAP functionality, I need to stay with this rilphone until Roger's issues a newer version. I also don't really like hard resets so I'm being conservative about flashing. So for now, as I experiment with newer radios, I keep using the rilphone cab provided in this thread.
Click to expand...
Click to collapse
You can use diff radios with the CAB, but just that sometimes functions in the radio arent implemented in the rilphone.dll which kinda sucks.
For now it will take time until rogers releases another windows mobile phone, so... my opinion is that we're going to have to wait.
Damn rogers.
Concerning the @ sign, it's normal, it just means that the name is longer than what the phone can take.
Has anyone tried this on a tilt with a custom ROM? Tempted to try this...
D0MZE said:
After a lot of efforts by a lot of people in the Raphael, i want to send a special thanks to Captain_Throwback
I sent him the rilphone.dll used in the diamond Rogers ROM to enable Name Display on my Diamond using Dutty's ROM v.4
With his knowledge he was able to cook a cab with the proper settings to enable name display without having to cook it directly in the rom.
Thats fantastic!
Please post your experience and what ROM you used this on.
Click to expand...
Click to collapse
Thks for the work to all;
Matt1408 said:
Sorry for the late reply, found this page on Google.
Download the Diamond .cab. Installed in on my XPERIA running 6.5. It works
Click to expand...
Click to collapse
Just logged on and checked; thanks a bunch; have it working on my tilt on FIDO..!!
super news..!!
Thanks for all the good work! This not only fixes my caller display problem, it also fixes my SMS timestamp problem! Now all incoming SMS's are correctly timed!!!
Rogers Name Display for WM6.5 HTC HD2
It doesn't work for WM6.5 on my HTC HD2, can somebody share rilphones.dll from WM6.5 Rogers/Fido device with me?
Related
Hi, I am total registry noob so I need a help with this.
I want to flash a new rom that dont have operator settings(wap,mms,internet) for orange sk, but the rom I am using now has that.
So the question is: is it posible to backup some registry from this rom and restore it in the new one? If yes, does anybody know what registry I need to backup?
I have never done the settings via registry... I always enter them myself.
This works fine as long as you know what they are. I jsut googled "orange GPRS internet settings sk" and got this:
http://windowsmobilesk.spaces.live.com/blog/cns!2C19B58AE653A521!116.entry
It would be worth checking that these match what you have already before you flash a new rom though....
Zippyioa
zippyioa said:
I have never done the settings via registry... I always enter them myself.
This works fine as long as you know what they are. I jsut googled "orange GPRS internet settings sk" and got this:
http://windowsmobilesk.spaces.live.com/blog/cns!2C19B58AE653A521!116.entry
It would be worth checking that these match what you have already before you flash a new rom though....
Zippyioa
Click to expand...
Click to collapse
Thanks a lot,
I sorted this problem by copying file: provizion.zip from the older rom(that has the settings) to the new one(that doesnt have the settings). And it worked.
Thanks again, I appreciate your help.
No problem...
Good luck with the ROM upgrade. I am using Duttys UC 5.2.19199 RTM and it is SO much better than the original T-Mobile ROM. Much faster and smoother running.
Zippyioa
zippyioa said:
No problem...
Good luck with the ROM upgrade. I am using Duttys UC 5.2.19199 RTM and it is SO much better than the original T-Mobile ROM. Much faster and smoother running.
Zippyioa
Click to expand...
Click to collapse
I am also using Duttys rom. He is the real champ in cooking roms.
Hi to all!
I want to know if is possible to have a Cab with the social networking engine from blackstone (Upload to facebook and youtube).
I Think that it's not impossible but it will update ManilaAlbum...
I know that only 2 roms have this function working (Dutty and UDk) but it will be great if everyone could install it...
No one knows?
*Bump*
I'd like to know if its possible to get the updated versions of HTC Album as a seperate installer also rather than having to flash a Rom which i'm a bit reluctant to do.
the social network engine is not only in htc album... it has a package for windows mobile too... I hope someone put a cab with all the necessary things...
Does anyone have this cab?
Bump bump bump
Da_G posted a cab in his raphael rom thread. Click on the paper clip to find it.
Umm, facebook didn't work for me. check it out.
ive just tried the edited gab from the thread suggested above and im running stock 1.93 rom and it works perfect for facebook and its quick!
thanks for all help everybody and especially DA_G for his work
you were able to make facebook work?
I couldn't, what phone are you using? on what network? did you put any special settings?
hoyler30589 said:
ive just tried the edited gab from the thread suggested above and im running stock 1.93 rom and it works perfect for facebook and its quick!
thanks for all help everybody and especially DA_G for his work
Click to expand...
Click to collapse
what do you mean edited cab?
hi im using a orange uk diamond but running standard htc 1.93 rom with .net 3 not sure if that makes difference and i installed the cab attached which was created by DA_G himself
i then restarted the phone and now ive got mobile uploading working perfect for facebook from album
Does this work for Sprint HTC touch pro? Was posted at wmpoweruser that it was not working on it: http://wmpoweruser.com/?p=2188
any updates?
im not sure it works on my diamond as said earlier ive got 1.93 rom and compact .net 3.5 but it works perfect after installing that cab
I have a fuze, and am running Da_G's rom, and it wouldn't work.
just installed and tested, I am getting a Login Error : There was a connection error while attempting to login.
do i need a custom rom... i thought this was made for the oem rom?
This is in the themes section
http://forum.xda-developers.com/showthread.php?t=469106
works fine on my stock 1.93 rom
chrisd1a1 awesome, thanks for the link!
villa_bryan said:
you were able to make facebook work?
I couldn't, what phone are you using? on what network? did you put any special settings?
Click to expand...
Click to collapse
Hi, I'm on UK T-Mobile and I cant get it to log into my facebook account, keep getting login error........ any ideas why this is? anyone else experiencing this? I am using Morna 1.7.1 (which I must add is an excellent ROM... very fast!).
Thanks
Anybody extracted all the cabs already?
Especially interested in the Manila version and all the AT&T add-ons.
Thx
wait. you actually want the att bloatware?
also, the tf3d stuff is only slightly optimized, if you're running any of the manilas out there that are updated recently, it should perform better.. especially if you actually use wm6.5
Yes, the bloatware incl. Manila to rewrite/update my Fuze setup guide.
I admit that I'm a little bit reluctant to flash my phoen back to the latest ATT since I kinda depend on it for the next two weeks and cannot run the risk to wreck it at this time.
i c... I can provide you the set up file, but I have no knowledge of how to extract it. If you are interested, send me a PM and i'll see if i can upload the link for you.
EDIT: the official update is actually really good. especially the radio. my gps fix is very very fast, and my battery life is great.. even with push..
I can download the EXE from HTC/AT&T myself but would need to install to copy all cab files under the Windows directory.
If anybody has all the cabs which reside after an install (better a de-böoated install) would be great.
The success with the GPS and good lock is simply related to the Radio bundled with the new ROM which is/was available at XDA for some time. Sure, for a branded ROM it was finally time to fix these issues.
yeah, i did mention that the radio was why the gps is so much better. I'm just a sucker for going around flashing new radios... It got to be so much of a hassle keeping track of them that I gave up..
anyways, sorry I can't help you there in terms of the cabs since I'm very uncomfortable with doing stuff like that since I'm paranoid about my phone numbers and notes tagging along..
but I can say with confidence that the new update is really good and you should not be worried about flashing the new rom at all. The only thing is that I see you are using energyrom so i understand that you don't want to flash back and forth.
Can you take a look in your Windows dir and name me the CAB files there?
Most common none is deleted after install so that list could be helpful already.
NRG ROM ... well ... it ROCKS.
I'm not such a fan of 6.5 yet thus running the older NRG 2.0 without ANY problems.
sure! that I CAN do.. here's the list (btw, my rom is unbloated so i might have all of the cabs..)
BlockBreakerDelux_105_signed.cab
DD2_GM_signed.CCAB
GetATTNavigator_NoTestAccount.CAB
GetMail_2008030_signed.CAB
HTCAP_Service_ATT.CAB
Java_Preloads_20090422_signed.CAB
JQ2_0-1-0_20080905_signed.CAB
MidnightPool3D_200801022_signed.cab
MobileBackup_1.0.1_signed.cab
MobiTV.3.0.4.68563_signed.CAB
mobivj.3.0.4.75845.CAB
Move_camera.cab
MSFT_SecurityPolicyWorkaround.cab
MsPacMan_20080910_signed.CAB
MusicID_1.3.25_signed.CAB
musicync_2_0_0_signed.CAB
PPC5.0 HTC COKE ATT.CAB
PT_BlackSCR.CAB
PT_Manila_REG.cab
removeHiddenProxy4CWS.cab
restoreHiddenProxy4CWS.cab
Sudoku_0.11.66_signed.CAB
WM6_PPC_HTC_Opera9_WWE.CAB
XMRadio.4.0.4.68563_signed.CAB
that's about all I see.. I might have some typos in the numbers but hopefully they should be all correct. Good luck and if you need anything else, just holler.
Cool mate! ... and this is from the latest AT&T ROM upgrade?
Would you mind to copy all the cabs to your PC and zip them in one humongous file? Check PM
i can do that provided that it isn't locked in by the OS. I'll do it later when I come back.
Thanks, check your PM (Private Messages).
Sorry to interrupt, but here you go:
http://rapidshare.com/files/249085596/CABs_from_New_AT_T_ROM.zip
Manila is not installed from CAB, so I created a CAB for it.
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
tyguy said:
Thanks NATF.
Just one Q, what does then the PT_MANILA.CAB do?
Chefs like you never disturb!
Click to expand...
Click to collapse
Actually, you don't need that CAB. It is installed during Initial Configuration, and it adds the registry entries that start TF3D on boot. However, I added the required entries to my TF3D CAB.
Hey NATF....what happened to the OzIM cab? I was curious about this thread because I wanted to know if there were a new version of the cab for the instant messaging package as well....or did you just leave it out because the version didn't change in the new ROM perhaps?
Just in case i dont like it or am i stuck with cooked roms thereafter?
Yes, Once installed HardSPL, you can put on any rom you wish,
This means, that you can flash Official Roms (Perhaps to change language) or Cooked Roms, As long HardSPL is on your device, you can reflash any Rom that is built for your device
Since HardSPL cannot be removed by flashing a rom (you can remove it with the removal utility) you don't have to worry about Official or Cooked roms ;-)
Hey!
Thanks for such an informative and quick reply!
I'm just thinking about my warranty etc and also whats the best 6.5 to try whilst i have your help?
Does Dutty not do Tpaz roms?
Cheers
jeutie said:
Yes, Once installed HardSPL, you can put on any rom you wish,
This means, that you can flash Official Roms (Perhaps to change language) or Cooked Roms, As long HardSPL is on your device, you can reflash any Rom that is built for your device
Since HardSPL cannot be removed by flashing a rom (you can remove it with the removal utility) you don't have to worry about Official or Cooked roms ;-)
Click to expand...
Click to collapse
W.r.t warranty, if you ever have to send your phone in for repair under warranty, be sure to remove hard SPL with the removal tool first
Thanks mate, whats the 6.5 rom you are running like? is it fast? any benefits?
adesonic said:
W.r.t warranty, if you ever have to send your phone in for repair under warranty, be sure to remove hard SPL with the removal tool first
Click to expand...
Click to collapse
Dutty does not work on the Topaz (yet? xD)
I still use a highly (self) customized stock rom,
If you want to use a 6.5 rom I'd recommend Tom's or udK's roms.
And indeed, if you ever need to return your phone, Try to flash a stock rom & remove HardSPL from your device, and you should be ok ;-)
adigraham said:
Thanks mate, whats the 6.5 rom you are running like? is it fast? any benefits?
Click to expand...
Click to collapse
I am running Tom Codons' latest 6.5 ROM - Biggest benefit to me is that windows media player appears to have more video codecs than before - I can now play vids that would not play on 6.1.
Toms ROM is genreally fast and bug free and he includes a registry editor for your convenience!
Ok great thanks guys!
As HTC dont supply a stock rom are the original rooms on the wiki mirror the same?
adigraham said:
Ok great thanks guys!
As HTC dont supply a stock rom are the original rooms on the wiki mirror the same?
Click to expand...
Click to collapse
The ROM's which names start with RUU... are official ROM's from HTC. The question is if you find the original ROM that is on your TOPAZ right now.
If it is not listed yet, you might not be able to get back to your original status once u flashed a cooked ROM.
A possibility is to dump your original ROM and try to create the files for reflashing it. I never tried by myself, but I see in the threads of "TOPAZ ROM development" that it is not that easy.
At the end it's your decision to accept the risk.
Great thanks!
Well im flashing with Toms 6.5 rom and yeah i have hardspled
Cheers guys!
oh and i have a tomtom 7 version, what sat nav you all preferring? need to get an 'extended' version ideally to play with
I had some voice problems with tomtom, So I use iGo8
what did that cost ya?
Not that much *rolling eye's*
Although tomtom is fine with the fix...
Go with Garmin GMXT just google for the K*y Gen and procedures.
Looks like garmin dont like built in gps? at least not what i tried!
adigraham said:
Looks like garmin dont like built in gps? at least not what i tried!
Click to expand...
Click to collapse
Garmin XT is working fine on my Topaz, no problems with the built in GPS.
adigraham said:
Looks like garmin dont like built in gps? at least not what i tried!
Click to expand...
Click to collapse
I use Garmin XT - it works flawlessly and I'm very happy with it.
I was previously using Tomtom but had the voice command cut-off problem and the fix available here didn't fix it.
@ Garmin XT users,
I don't know that particular GPS software,
And have 2 questions about it,
1) Does it have Dutch voices?
2) Does it have a Belgium only map?
If you could answer these questions I would be very happy,
Cause iGo8 isn't the best there is either
jeutie said:
@ Garmin XT users,
I don't know that particular GPS software,
And have 2 questions about it,
1) Does it have Dutch voices?
2) Does it have a Belgium only map?
If you could answer these questions I would be very happy,
Cause iGo8 isn't the best there is either
Click to expand...
Click to collapse
Yes, the Netherlands is listed in the voice options. I don't think a Belgium only map is available. I have the Europe map with mine.
aww, thats sad, I only use a Belgian map, So I don't need all the others...
Well I'll look into it ;-)
Thanks for your reply!
*edit* It seems like they have Benelux maps... Which is Belgium Netherlands Luxembourg
Lets fire up that search engine x)
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
There out their! LOOK! MightyROM is so far the best you just need Fave People, the picture mail app that sprint didn't make, and change the location the photos save at to using advance config
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
I am running Calkulins Ver. 4, and loving it.
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
wmdunn said:
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
Click to expand...
Click to collapse
Precisely.
My favorites would be
STX
Mighty 6
Demolition
SSK
in that order as far as 6.5 is concerned. For 6.1, I would say Mighty 4 and intx 2.5 or premiere.
im running EnergyROM and love it
I'm on Mighty Rom 6, but the battery drains quicker than my stock rom. Any idea why?
Forgive the noob question but...If I install a cooked ROM on my Telus Diamond will I still have Telus functionality as in cell service, etc? Would Telus be able to tell and then cut my service or something? What would be the ramifications of installing another ROM? Other than the risk of bricking my device what, if anything, would I lose.
expire in 30 days
got it running great thru juicy rom , 6.5 is awesome, but says will wm6.5 pro will expire in 30 days. What?!?