Red phone button not functioning anymore - Tilt, TyTN II, MDA Vario III General

So all of a sudden (well likely not all of a sudden... I must have done something) the red phone "hang up" button doesn't do it's job anymore. It doesn't hang up when in a call, like it used to.
I think (stressing think, cuz I'm not quite sure) that this started when I uninstalled Resco Contact Manager but am not sure...
Anyway, wondering what I need to do to re-enable the functionality of that button.

have you eliminated the possibility of the button failing at a hardware level?
i mean to say, does the red key work to minimize all programs? does long pressing the red key work for whatever long press configuration you've set up?
if the ONLY behavior of the red key that is affected is hanging up a call, then don't fret...it most certainly is a software issue and it is likely someone will be able to help. but it would help the others to know whether or not this could be a hardware issue
for all software issues, the bottom line is that hard resetting solves the problem as a last resort

Did a soft-reset (for another reason) and now the key is working again. Minimizes programs, and ends calls.
Weird.

Let's bump this topic...
I Have the same issue... and only with a soft reset solves this. But after some time of use the issue comes back again and then I need to do another soft reset to solve the problem. I've been searching and experience with the phone and it seams to do this after using the sms feature...
Very odd...

Related

Start icon not functional

Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Do you have a password set? Does this only happen after a call? If so, this has been discussed many times - just do a quick search.
If not, I´m afraid I can´t help you with your issue.
Good luck!
djmaven said:
Has anyone come across the problem of a TILT hanging up (could not find common denominator when does this occur) and ONLY the "Start" icon (and the "start" button)is inoperable. i.e. all functions work perfectly, however I have no way of getting to the Start screen - only soft reset. Help anyone
Click to expand...
Click to collapse
I think I had this problem also. I'm not sure what causes it, but it looks like ti appears after I try to use MS Voice Command.
I had this problem. I found it doesn't need a soft reset, just switch it off (hit the power button briefly) and back on again. Fixed it every time. Annoying but not fatal...
I am having a similar problem. I recieved an 8925 with a touch screen that doesn't work. No physical damage, but I noticed there is no start screen. I got it to upgrade to WM 6.1but still no start menu or system settings. It boots to the align screen but of course the touch screen doesn't work so that's all I get. Sometimes I get past that and the rest of the PDA seems to work with the keypad. I have reset it several times and still nothing. I removed the touchscreen and ordered a new one. Hope I haven't spent folishly. If someone has a clue to what the problem is I would be very grateful.

tilt - power button issues

This just started happening:
I restart my tilt. I push the power button and the display brightness gets brighter but the device does not turn off. I push it again, the device turns off but then I can't get it to turn back on without soft resetting! What the crap??!!
Any clue what is going on?
Thanks!
Alan
I am just a n00b, but it sounds like your power button got mapped to your brightness control somehow, and when the screen goes black, the device is not off, just brightness set to 0. When you soft reset, the unit just sets back to default. I am not proficient in mapping the buttons, but a quick search on the forum should help. I know that there are a lot of threads having to do with mapping keys.
Hi
I experience the same problem and strange enough after I downloaded a patch released by HTC for potential issue with blue tooth and the phone.
A soft reset does not solve the problem, instead a Sync with the PC (even not a full one) cure it for a period of 2-3 days.
I have the impression that it is more complicated than just a registry issue. For instance I can not run the TOM TOM any more.
The HTC support only suggested a hard reset that I did but for complicated reasons I was forced to restore a back up I had.
So I am still affected by this problem.
I did a hard reset and used spb backup to restore everything to the day prior. The last thing I remember installing was s2u2 0.99c which seems that it would mess with how the device responds to the power button. I'm going to post over there and see if there is a chance it was the culprit.
Alan
You have to disable directdraw in s2u2.
persiansown said:
You have to disable directdraw in s2u2.
Click to expand...
Click to collapse
It was and is disabled at least according to s2u2 settings. I did notice that for me in 0.99c DPAD was enabled but did not work.

Help buttons not working on my At&t tilt

Alright my At&t tilt front face buttons started to not work (i could only use the arrow buttons and the ok button) and my keyboard stopped working but the arrow keys would. i upgraded the rom after calling htc for help. that didnt fix a thing and now today none of the buttons work. i keep getting the PTT to come up and ask for installation and edfc keeps typing themselves on the screen. so idk if it is a software problem or if the hard ware is malfunctioning.
Damn, I got the same problem. Does anybody know how to fix this?
the same problem here... :/
same problema here.
i already tried another radio, another SPL, another ROM and nothing.
any idea?
Just updating.
Yesterday my tytn started working perfectly again, but today the same problem is occuring. I did nothing, so probably is really a hardware issue.
I have a similar problem.
Send/End + Soft Keys + Keyboard are not working. The issue is not resolved yet?
Wow, this problem just happened to me as well. I've searched everywhere on the net and couldn't find anything.
So is this a pervasive issue? Anyone with any hint as to what might be the source of the problem?
Originally, I thought it the PTT button was stuck in the PRESSED position because the phone behaves as if this button was constantly being pressed. For example my PTT button was mapped to Voice Recorder if the PTT button was held down. The voice recorder constantly comes on everytime I turn the phone on!!
1234567890
I have the exact same problem.
The only change I recently made (two weeks ago) was installing tom tom navigator.
First I thought it was a virus and I installed bull guard, but with no success.
It opens/closes the start menu every second, no buttons work apart from the directional buttons and it writes "edfc" in my textmessages when I turn on/off the screen with the power button.
Most of the time(!) this irritating opening/closing of the start menu only happens after I first turn off/on the screen (with the power button).
I saw this problem described in a post dating back almost two years ago. Someone ought to know the answer to our problems. What does HTC say about it?
I have been lucky and not had this issue yet; but I would recommend starting by flashing the stock rom from HTC. Then hard reset; that will clear everything back to original. If you still experence this after that, then you have a hardware issue. Good luck
This just happened to me this morning. I cant use any buttons and nothing is popping up. This is soo wierd cause the phone was just sitting there overnight!!
Me too...
I have been going nuts with this issue for a couple months now. Makes the phone unusable half the time. I am so disappointed to find that a ROM reload doesn't fix it!! I remapped the 6 key to none and that sort of helps but it was mapped to Voice record before and it would constantly record memos until all the memory was gone in the phone and then it would all crash from there. So frustrating.
I too get the edfc message after I reboot....
It really seems like a virus the way it acts but I guess if it is a hardware issue then it's not a virus.
Anyone ever figure anything out with this? Nothing has changed on my phone recently.
Still an issue?
Holy Toledo fellow Tilt Users. Have you ditched your half-functioning touchscreen, or have we figured out how to solve this issue.
Recently I FOUND THE SAME PROBLEM!
I am going to do what was suggested (original HTC Rom & hard reset) and will let you know if I get the rest of my keyboard back...
All buttons except for power and... NOT WORKING
Outside "Enter" buttons work but they are mapped to Windows key. ? Weird. For some reason the kaiser thinks it is something else. I do not know how it got this way, but there must be a way to convince the hardware of the existence of all my other buttons. The entire keyboard does not work.
Hard Reset & stock HTC Rom did not help. I was surprised that I could hard reset it at all since the two soft buttons are unresponsive to software.
Anyone figure this out yet?
Hi, I got the same issue today as well - Has anyone got rid of this?

Weird Kaiser Hardware Button Failure

Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?

Keyboard Problem

Well I currently have a rooted g1 phone, but it is completely useless. Every time I use the keyboard or any keys on the phone(Menu,Home, Power, action, call) button. the buttons were programmed to like press other stuff, for example I press the menu button and it turns off my phone, if I press "I" on my keyboard it erases everything. And If I press the end button it automatically types" u345". What exactly is this? Is this a physical issue? or Is the g1 itself that is messed up? I can barely use the phone! All the buttons type different stuff?!! please help! Hardware problem? or Physical? And idea's of fixing, thanks for reading.
I have a similar problem but not as severe. Almost all buttons work ok, just the buttons in the middle of the hw keyboard like y, h, b and space sometimes print other stuff, b sometimes writes a few characters and opens up the search, n sometimes writes some characters with an 'enter' in between etc. and these random outputs are usually the same, ie I get the same stuff by pressing b over n over again. They work fine after some pressing, and I've noticed if I press these keys immediately after pressing something else, they work fine. The problems has persisted through rooting, flashing, radio change, bootloader change etc. Anyone know what this problem is? Is it a hardware issue should I get it checked? The hardware guys here charge so much I have to be sure before I take this to them. Any way I can correct it myself? Any help would be appreciated.
Your best bet to completely wipe and reflash a stable rom (like Super-D). If problem persists - you have a hardware problem. Sounds like water damage to me to be honest.

Categories

Resources