In my car, I use my Touch Pro bluetoothed to a Blueant ST3 speakerphone & at the same time the Touch Pro headphone connector connected to my car stereo. I can listen to mp3s thru the car stereo and during an incoming call, the Bluant controls the call audio exchange. When the call is over, everything switches back. Is there a way or a program to keep the call audio directed thru the headphone connector while maintaining the Bluant bluetooth mic capability?
Related
I bought a connection for my diamond to connect to the aux input of my car stereo sort of hoping that it would work by allowing me to use the car speakers to speak & listen from phone, listening was not a problem, crystal clear but the person on the other end could not hear me. Is there an easy way to get this sorted? My stereo does not have bluetooth.
Depends on what sort of "connection" you have bought and how it works. Is it meant to be a handsfree unit, in which case it should come with its own microphone?
Or is it a USB type headset lead unit that is only meant to be used as a means of playing music via the car stereo, in which case you probably can't attach a microphone and can't use it as a handfree unit.
The way to sort it is to buy a bluetooth handsfree unit complete with microphone. These communicate with your phone using bluetooth and can either have their own amp and speaker or be wired into your car audio (usually via the phone facility in the DIN connector on the back of the car unit).
If you want to use for both phone calls and listening music it is best to get one that supports multiple Bluetooth profiles, including handsfree and A2DP.
Hi everybody.
I searched but did not found answer to issue I having.
If I turned on BT my bt headset (A2DP) works fine, but on incoming call there is no ring sound on telephone speaker. When I checked phone i could see that is muted. My wild guess is that phone sends everything to headset because it is in A2DP mode and send every sound through BT.
How to fix this?
Headset?
Is your Bluetooth headset designed to handle calls as well as music? If not, that will be your problem. When I'm listening to music via BT headset, the phone rings through the headset, not the device speaker
grahamkdt said:
Is your Bluetooth headset designed to handle calls as well as music? If not, that will be your problem. When I'm listening to music via BT headset, the phone rings through the headset, not the device speaker
Click to expand...
Click to collapse
My bt headset is designed to handle calls.
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-ds220?cc=CA&lc=en
What I want is to hear ring signal through device speakers as well as I don't have all time earpieces in my ears and I can miss a call
Hey guys,
I have a BT car headset which allows me to listen to music through A2DP and take telephone calls with it's built in microphone.
However, the built in mic is CRAP for voice activation and calls where as I can use my Gear to voice activate stuff and it works perfectly when driving.
However, if I dial using my watch, then the conversation goes through the watch, so 2 questions:
- Can I dial with the watch, then have my conversation via the car stereo's BT?
- Going one step further, can I have a conversation that uses the mic of the Gear and the speakers of the car?
I know this is all a question of BT diversion, but I don't know how to achieve it. Tasker?
Anyone having trouble getting the navigation to play through your car speakers? I have it (maps) un muted and still won't work. My music and assist works fine.
Since my car's stereo doesn't support A2DP, I use a Blackberry Bluetooth Stereo Gateway connected to the Aux. The X connects to the BB Stereo gateway via A2DP, and all audio, including ring tones, google maps, etc, are heard when my stereo is on Aux.
Thanfully my car does connect via Bluetooth Headset/Handsfree so when the phone rings, the stereo makes noise and shows the incoming call on its nav screen.
KidJoe said:
Since my car's stereo doesn't support A2DP, I use a Blackberry Bluetooth Stereo Gateway connected to the Aux. The X connects to the BB Stereo gateway via A2DP, and all audio, including ring tones, google maps, etc, are heard when my stereo is on Aux.
Thanfully my car does connect via Bluetooth Headset/Handsfree so when the phone rings, the stereo makes noise and shows the incoming call on its nav screen.
Click to expand...
Click to collapse
I use the auxiliary also to no avail.
I'm considering pick up a Z3 Compact, and was wondering if anyone could tell me if you could listen to music via the headphone jack and have bluetooth connected for phone calls at the same time. I know that the Galaxy S3, for example, cannot do that, while HTC phones can.
Just so it's clear, this is what I'd like to do:
Headphone jack connected to car stereo's aux in for music, navigation audio, etc.
Bluetooth connected to car for hands free phone calls.
(My car is a few years old and can't do music over bluetooth.)
Can the Z3 do it?
Thanks!
Just tested with the sbh52 and Vizio sound bar auxiliary port.
Works just as you desire. When answering a call, the audio cuts from the headphone jack and routes to the Bluetooth device automatically. This occurs whether you answer from the phone or Bluetooth device. Upon hanging up, the music resumes playing and can be controlled with your Bluetooth device.
Sent from my D5803 using Tapatalk
Thanks!