Can somebody compile an exit exe? - Touch Diamond, MDA Compact IV General

In relation to http://forum.xda-developers.com/showthread.php?p=3460795#post3460795
Could somebody who has the means compile a simple exe file that does nothing else but exits?
I intend to use it to overwrite wmplayer.exe. I can't use a 0 byte file as MSVC complains it's not a valid exe file.
Many thanks,
Andrew

May I ask why you want to overwrite wmplayer.exe? If your intention is to cause it not to run then why would you care what MSVC says about?

MSVC runs wmplayer when it "detects" a bluetooth stereo signal in operation. I'm unable to stop this from happening everytime I take a call etc.

Bump ^^

What about this one?

Related

Voice Commands Over Bluetooth Works on TuMa v1.3 - WM5 ROM

I have posted This thread to assist anyone like me, who is not a programming whiz. Got to Install this mainly through trial and error and I am not an expert in this. So If anyone can make my steps easier please do!
This is a Variation Installation For a thread a while back in October 2005 Author Ncruz and effjay. Ncruz Posted a wm5 cab. This cab does not install directly due to permissions. However I have extracted the files using windows cab manager.
First are the files are required in windows. If it asks about permissions copy to PDA root folder then copy with Resco File Explorer and overwrite. Next are the registry files. You can import them with a registry program such as tre or regedit.
If you want Microsoft Voice commands to be the default program overwrite SSDialer.exe in windows folder with Voicecmd.exe from Program files/Voice command/ otherwise Cyberon Voice is initiated when you press headset.
I will post the cab in its entirity although it will not install, incase someone knows an easier method to get voice commands working Please contibute to this thread. However this method worked for me. Below in the zip are the files Extracted with Win Cab manager in zip format so you can copy zip to your pda then extract them to the correct folders, along with the registry files you need to import to registry.
N.B..sound of Voice commands is through PDA and not headset. Pressing headset connect button opens Cyberon or active voice command depending on what you have
Can not seem to be able to import the reg files....
OKay, got the files to import and the files copied - no go for me. Darn-it.
Installation
did you do a soft reset with the software built with the rom and repair the bluetooth headset
I might have reset without using the software reset....
However, got it working with this cab file that I found on my storage card. I even got MS Voice Command to work when I hit my BT Headset button.
Heck, it did not even change the record button to SSDialer! I would have thought it would but it did not. So, I am happy!
glad its working for you
now how can i do?
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
I can't download files..... Where can I get them?
Re: now how can i do?
kriengkrai said:
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
Click to expand...
Click to collapse
The only way I know how to keep BT on is by plugging in my Device to a power source and doing a soft-reset. As long as I do not turn it off with the power button or have it set to auto-power off while plug in, BT will stay on. I do this everytime I get into my car - since it takes me a hour [sometimes more] to get home, so my BT Headset always works.
Hopefully I explained that correctly for you to understand....
Odie
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Re: Odie
MOHDWADEA said:
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Click to expand...
Click to collapse
Yes it happened to me as well, but i prefer BT Voice Command Activation than WLAN icon
Thanks for the info
BT activation doesn't work for me...
For some reason the activation through BT headset doesn not work for me.
I'm using WM5 TuMa 1.3 ROM.
The BA_WM5_Voice_Dialer_2.cab doesn't install on my device (permission violation), so I copied the files manually to the Windows folder.
The reg files also don't import to my registry when double-clicking, so I made the changes manually.
It still doesn't work.
Now, when I hit the button of my BT headset (Moto HS-810), the standard dialer is activated (instead of the voice command app) and I hear hissing sounds in the headset.
I tried it both with Cyberon and MS apps. Both don't work.
Did anyone encounter this problem? Anyone solved it?
Thanks.
anyone knpow how to do this with voice command on 2003se?
Just upgraded to TuMa 1.3 and have found a MUCH more simple way of doing it.
1) Install Microsoft Voice Command
2) Download Total Commander (http://www.ghisler.com/ce.htm)
3) Using Total Commander change the read only tickbox for \windows\sddialer.exe so that there is no tick (1 press just greys it out, i needed to press twice) <- browse to \windows in TC and right cick (hold down) on sddialer.exe, and click properties.
4) (you don't need TC for this) Copy %install dir%\voicecmd.exe (where %install dir% is the directory you installed voice command to) to a temporary location and rename it to sddialer.exe.
5) (using TC) 'Right click' on your new sddialer.exe (previoult voicecmd.exe) and select 'cut to clipboard' then navigate to \windows\ and 'right click' and select 'paste from clipboard', when propted overwrite the origional file.
6) press the button on your headset and test it!
the only thing we need now is for some clever person to work out how to route the voicecmd audio through to the headset instead of the load speaker (to my knowledge it uses the microphone on the headset allready (at least it works when i speak quietly from the next room )
it works like a charm
cheers
Do what Midlet says?
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Re: Do what Midlet says?
sgrbhtngr said:
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Click to expand...
Click to collapse
Have not investigated midlets way of installing as Mine is working. However i suggest that if you check your registry and see if the reg keys i posted within the zip are there. If his way works fine, if it does not i suggest you import the keys into registry and see if that helps. I also strongly suggest you make a note of the keys and where they are imported too, as if it does not work you can remove them.
It worked
Mohdwadea,
Your method worked! This time I performed a soft-reset after the installation and also re-connected the headset. I did not have to go he registry-entry route because the cab-file installed on my device.
This will help me a lot on the road in business. God bless you.
Just glad its working for you!
voice not sending
MOHDWADEA,
I am using this fix a lot on the road. It works very well... expect for in one situation! I can initiate voice dialing by the record button on my device and it accepts voice dialing commands through the bluetooth headset and teh call goes fine.
However, if I initiate the voice dialing using the button on my blueooth headset (Cardo Scala 500), it initiates the voice dial app just fine, accepts commands and conencts the call.... but the other party cannot get my outgoing voice through my bluetooth headset, rather it gets the voice from the mic on my phone. Also, the incoming sound can be heard in my bletooth headset but ALSO on the phone.
Any suggestions?
Thanks!
Sagar
I-mate PDA 2K
WM5 TuMav1.3

Hack A2DP into 2.16.9.1?

I was quite happy with the A2DP profile in the QTEK test ROM. Unfortunately, I had to install 2.16.9.1 because of the push email and the vastly improved Wi-Fi. That meant sacrificing A2DP.
But why can't we have it all? It should be as simple as extracting the bluetooth stack files from the test ROM and copying them to a 2.16.9.1 device. Does anyone know what files comprise the BT stack?
Also, I haven't heard of attempts to port Widcomm or Blue Soleil to Wizard. Is that because it's impossible, or because all the top developers are busy playing with their Universals?
Anyway, let's start by assessing all the information available on the subject and see where that takes us.
Thanks,
Mike.
I second that. It shouldn't really be that hard and its something everyone wants. I think once the "New ROM fever" passes, people will start working on the other aspects such as A2DP etc etc.
Excellent. Lets see if we can get hold of a copy of the bluetooth stack on the K-JAM's (QTEK TEST ROM). We need to extract the related Bluetooth stack files.
--> JasJar User here.
I downloaded the ROM and extracted its contents. I need to extract the contents of the nbf file. Anyone know what program i need to do that?
Another way is to flash rom and then to use TestWM5 utility. You can find it there:
http://forum.xda-developers.com/viewtopic.php?t=26987&highlight=testwm5

how do i turn off confirmation "beep" after hitting send

is there a way to turn off the beep when you hit "send" after dialing a number?
Lavachild said:
is there a way to turn off the beep when you hit "send" after dialing a number?
Click to expand...
Click to collapse
You need to install a program that can edit registry and do the following change:
Look up HKEY_CURRENT_USER\ControlPanel\SoundCategories\CallStart
Change the InitVol value to 0
Thanks a lot for that bit of info... The beeping was beginning to annoy me aswell
brilliant,thank you!
Amateur question. Where can I find a reg edit program?
Lurchy24 said:
Amateur question. Where can I find a reg edit program?
Click to expand...
Click to collapse
This is free:
http://www.phm.lu/Products/Smartphone/RegEdit/
Guess you have to choose the ARM version at the top in the drop down list.
Didn't get the desktop installer to work.
Copy the .cab over to your device and run it from there.
Well... why not just put it here.
Thanks.....
i downloaded the free trial of resco and that works great. i liked it so much i will buy it for sure. www.resco.net
After changing the value to "0" and pressing done, I exit the program and no longer have the beep when dialing. Once I shut down the phone and reboot, the beep starts up again. Is there a way to make it permanent?
It happened me too, permanent solution - I rewrited file callstart.wav in Windows folder in Audacity program and I used function - silence. It means now when I call my handy play only silence on call start
Lurchy24 said:
After changing the value to "0" and pressing done, I exit the program and no longer have the beep when dialing. Once I shut down the phone and reboot, the beep starts up again. Is there a way to make it permanent?
Click to expand...
Click to collapse
There is. 1. Use Total Commander (freeware) and copy the file Silent.prof.xml from the folder Application data\Profiles to the folder \Application data.
2. Then rename the copied file name to Normal.prof.xml (or Meeting.prof.xml, if wished, this is the buzzing profile).
3. Then move the new Normal.prof.xml (pr Meeting.prof.xml) back to the folder Application data\Profiles and overwrite old file.
4. After this you'll to have to reconfigure your settings in the normal (and meeting) profile but the beep at call start won't return even if device is restarted.
Got this solution from another S730 forum. Seems the Silent.prof.xml file is the only one in which the beep at call start is disabled.
it's quite a lot easier editing your profile xml file. change the value 'CallStart' to '0' and you're done.
Hey Admins,
perhaps you can make a sticky "Tweaks for HTC Wings" including this tweak.
Bye
shadow2000 said:
Hey Admins,
perhaps you can make a sticky "Tweaks for HTC Wings" including this tweak.
Bye
Click to expand...
Click to collapse
I second the proposal.
can anyone tell me how to get rid of this on a kaiser? its driving me nuts! ive checked everywehre
ksga said:
it's quite a lot easier editing your profile xml file. change the value 'CallStart' to '0' and you're done.
Click to expand...
Click to collapse
I tried this to do with the built-in editor of total commander and I even tried downloading and uploading the file.
I haven't had any success. I changed the value to "0" and then I wasn't able to select that profile any more.
I had to start over with "use defaults", then I was able to select and configure that profile again.
What have I done wrong?
I was having the Same issue over here.
Now I solved it thanks to Radiax!
The solution is simple, change your profile again like you did last time, but after saving the file you have to navigate to Properties (File -> 0 More -> 4 Properties) and change the System value to +. Make sure to use the latest version (V2.5, released 24th of April) because this function doesn't work in previous versions.
Hope this'll work for you just like it did for me.
thats it!
Its necessary to set the system-bit!
Many thanks!
JunkieXP said:
I was having the Same issue over here.
Now I solved it thanks to Radiax!
The solution is simple, change your profile again like you did last time, but after saving the file you have to navigate to Properties (File -> 0 More -> 4 Properties) and change the System value to +. Make sure to use the latest version (V2.5, released 24th of April) because this function doesn't work in previous versions.
Hope this'll work for you just like it did for me.
Click to expand...
Click to collapse
Nice! This indeed works a lot easier than the steps I mentioned earlier in this thread.
Latest Total CMD + System bit set
Hi all,
I tried to set my Wings like described above, but I cann´t use the profile anymore after changing something.
I´m doing this with TC 2.5 and the system bit is set.
Any ideas?
edit: in addition - i don´t have a folder profiles in appdata, the xml´s are in windows folder on my wings

OBEX on Tilt?

Does the tilt support OBEX file transfer and push service for bluetooth? I know about the reg setting (..Microsoft/Obex/IsEnabled to 1) but it doesnt seem to be working. I also found a cab in one of the other forums (i cant find a link right now to show) and it seemed to help a little but i still get a lot of errors when i try to connect using Bluezard, saying things like There was an error in the OBEX service and that it cant find the OBEX Push service.
Is there a fix or is it just something i did to screw myself over?
Alright, screw it, ill just not mess with bluetooth as its obvious no one has ever had this problem...
Yes,
The Tilt does support OBEX on an official ROM, used it quite extensively. However, can't seem to find a OBEX package to cook a ROM cuz there's lots of variables to it.
Im using the standard tilt rom but i still have not been able to get bluetooth to really work. I found i thread with my same problem, but no real answer.
I can receive bluetooth files fine, but i cant send them. If i select beam it will just pop up, ill click the name, "Pending..." > "Sending 1/1" > "Failed".
before its suggested. I have Receive all incoming beams selected.
I have enable file share (Bluetooth FTP tab) selected.
I have my devise visable and discoverable.
i have changed the registry of Obex "IsEnabled" to "1"
also i think i MAY have found the possible culprit. in one of the bluetooth fix cabs i have downloaded. it modifies part of the registry to this:
Under HKLM\SOFTWARE\Microsoft\Obex\Services\{00000000-0000-0000-0000-000000000000}
It changes "Server" to the value "obexinbx.dll", but that file is not in my windows folder. is there a place i could get that DLL? (this is not the same as obexfile.dll right? because i have that...).
you can just use the advanced configuration cab and you can enable OBEX
ChInEsE ChIcKeN said:
you can just use the advanced configuration cab and you can enable OBEX
Click to expand...
Click to collapse
I think i have already enabled it through registry but if its something else, could you post a link to it?
pizzaguy said:
I think i have already enabled it through registry but if its something else, could you post a link to it?
Click to expand...
Click to collapse
its the sticky in the development and hacking section

Pocket Player "Notification Error"

Hi all,
My P4350 is showing the Notification Error for every now and then. It says "Cannot execute\Application Data\Volatile\pockeplayer wakeup.exe"
The Conduit Pocket Player had no problem. Once my friend took the phone to listen to the music. After the phone came back to me this error is appearing.
I uninstalled the application. But, still the notification persists.!!!
Help me.
Hi all,
I uninstalled the application and reinstalled. But, the error still pops-up every now and then.
There is nothing in that path, which the error notification shows.
Is this a virus? Do I have to change any registry?
Please help me.
Any solution?
Hi,
I may sound that I am in hurry to get a solution ofr the problem.
In mean time, I renamed the S2U2 as pocketplayerwakeup.exe and saved that into \Application Data\Volatile\
May sound crazy!!!!!!
So that, if the phone wants to do something, let it lock the keys. So, now I am not getting the Error message.
But, still is there any solution for this?
error again
The error appeared again on today. i was surprised to see that, the duplicate copy what I created was not there. Don't know how that file was deleted. I again created the file.
Is there a solution to this? (Apart from flashing the ROM).
Whenever I connect the phone to computer, it is deleting the duplicate file what I created.
So, whenever I unplug it from computer, I again start getting the same error notification.
It looks like some background services tried to execute that path. Here is my appoarch, but be caution, if you are not familiar with the registry, please make a backup before editing anything.
First check if no "weird" stuffs is in the "\windows\startup" folder, then check if that path or file is refered to in the \HKEY_LOCAL_MACHINE\Init and \HKEY_LOCAL_MACHINE\Services of the Registry and delete them. If still nothting there, make a complete search of the registry to see any reference to that file and delete it (it's ok since you already uninstall the program). Hope this help.
I am even more dumb when it comes to registry. (I can modify something if the name of the particular key is given.)
I could find the follwing thing in Windows/Startup
Capnotify.lnk
poutlook.lnk
WifInit.lnk
sddaemon.lnk
iLock2.lnk
WkTASK.lnk
GPRSNotify.LNK
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
raghu13uk said:
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
Click to expand...
Click to collapse
Try PHM Registry editor. Do a search with "pocketplayer" or "wakeup.exe".
No success
I finally installed PHM registry editor. But, did not find anything for wakeup.exe
What to do?

Categories

Resources