Database Develop

BlueAngel WM2005 problems resolution

Lets make a topic and post here fixes and useful stuff we'll find about WM5.
Here are tips to speedup WM2005 on BA:
1. Disable most sounds
2. [deleted, integrated into ba_wm5_fix.cab]
3. It is very annoying that OS checks the digital signature of all DLL/EXE files. I've uploaded a patched version that does not do that to /Uploads/Blueangel/wm5_test/ba_wm5_patch2.rar on FTP. It is nk.nbf file, replace the original file with it and reflash the device. This ROM version works a bit faster.updated 14 sent, probably fixed a problem that some CABs did not install.
4. Finally I've managed to make a backlight fix, I've taken FrontLight.Dll from 1.40 ROM and made a CAB-file that installs it and makes necessary registry changes. This CAB also contains registry fixes from p.2 and missing EXE files from my lower post. To install it just copy it to your device and run. updated 10 sent. 2005. Added 2 bluetooth files provided by ramram (today icon and bt settings). Removed STK.EXE.
5. I don't like the default behavior of hardware buttons - the leftmost and rightmost are mapped to softkeys. I've attached the fix that restores the WM2003 behavior. Previous version was not working. I've attached a fixed build.
6. To send files over BT use this method. Turn on BT, in Explorer tap on file and in context menu select "Beam File". It would send file over BT and IRDA.
7. Attached the camera fix CAB. It is taken from old ROM and is not fully compatible with WM5.
8. ramram made a CAB with album and MIDI ringtone support - http://forum.xda-developers.com/download.php?id=6658
9. dynastykai and rschell posted here that deleting hklm\drivers\builtin\camera and cameradriver registry keys would fix sound problems under SX66. I've attached a CAB file that would remove these keys (remove_camera_reg.rar). Updated 10 sent 2005, previous version did not install.
10. Added Headset_Today.rar. It shows bluetooth headset mode on today screen.
11. Added extended ROM unlocker
12. brn2prgrm found a fix for WiFi connection dropping on resume from standby - http://forum.xda-developers.com/viewtopic.php?t=30840
I've made BA_WIFI_FIX.CAB that sets the required registry value.
Note. After editing registry you need to power off your device, wait several seconds and soft reset. Otherwise changes would be lost!
Note2. When you install CAB file and it asks you to reboot device - don't do this! Power down your device, wait a bit, power on and then reboot. Otherwise registry would not be updated.
Note3. All CAB files attached here would work only on patched ROM!
Note4. Attached files may uninstall incorrectly.
Note5. If you have installed a previous patched or unpatched ROM - you can safely reflash your device with the most recent version. No data except for clock settings would be lost. It is not necessary to reinstall CAB files if they were already installed.

I'll copy here the other my post.
The main reason for battery draining in my case was that buttons are not locked when the phone is turned off. So it constantly turns on when it is in pocket. To fix this - take following files from 1.40 ROM:
Backlight.exe
ButtonLock.exe
CSDType.exe
DIM.exe
Keyboard.exe
MicrophoneAGC.exe
WLanMgr.exe
MyCPL.cpl
and copy to \Windows folder on your device. Windows would cry that files are unsigned - say "yes", then reboot. You'll be able to turn keyboard backlight off, lock buttons, change GPRS class, but you cannot change brightness. The sliders are ignored. They are ignored even if you'll take driver from the WM2003 OS.
Link to files: http://forum.xda-developers.com/download.php?id=6607

Guys, Install Album with midi.rar , it will enable the album works with the camera file tweaked by Mamaich and especially to enable midis as ringtones good luck
I also created a cab file to let you disconnect from the G bubble while you're connecting from the GPRS.
Tonailed created a file to wake up the device and turn on the screen backlight the time you receive an SMS. Click here to download!
To resolve the issue of the voice command "Low voice while announcing the names" on WM2005 install this patch:
Click Here to download!

Bug: Bluetooth shuts off when the device power button is pushed.
Bug: GRPS cannot be connected manually, it has to be done using a web browser.
Fix: By setting the clock to always be on the task bar, it greatly increases speed, reason it no longer has to redraw the bar at the top. So switching between windows is much faster. To do this click on clock settings in the control panel.
thanks

TOmTom 5.10 works
WM 5.10 works
Voice Command Works
Regedit works
Cryptocard works
Wifi works
...

First step to this?
So in my oppinion the first step now must be to create a buglist . I think, devs wiki would be a great place for this, what do you think?

mamaich said:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
create there a DWORD key with value 128 (all numbers I'll post here are decimal), this would eliminate clicks during audio playback
Click to expand...
Click to collapse
DWORD key named what?

KTamas said:
mamaich said:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
create there a DWORD key with value 128 (all numbers I'll post here are decimal), this would eliminate clicks during audio playback
Click to expand...
Click to collapse
DWORD key named what?
Click to expand...
Click to collapse
Try Priority256 - thats what its named under 2003SE.

efjay said:
KTamas said:
mamaich said:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
create there a DWORD key with value 128 (all numbers I'll post here are decimal), this would eliminate clicks during audio playback
Click to expand...
Click to collapse
DWORD key named what?
Click to expand...
Click to collapse
Try Priority256 - thats what its named under 2003SE.
Click to expand...
Click to collapse
I tried that, no joy. I think it is more basic than that one registry setting. Also tried changing wavedev.dll to btceavif.dll in the registry, again no joy.

i need help
i install on my sx66 the pda2k_5.rar
1.its very slow and i stop the sound
2.i cant dial with my phone the phonepad is not function
3.i dont get the bt mannger on today screen
4.no ring on incoming calls
appreciate help

You have to wait a few seconds, until it dials. But it works! On PH20B1 Devices there is no sound after all. Can PH20B users copy that? What about sound on your devices?

I've made a fix for the backlight problem and integrated there ramram's CAB. See the first post.
Bubisch. I don't have sound problems.
icohen2005. On my device it is not slow, no problems with rings or phone pad. I use patched ROM version.
The only problem left is that it does not respond for several seconds to keypresses/screen taps after it is turned off and quickly on again. And SPB PocketPlus 3.0 today plugin slowsdown the device.

I use dualsim adapter, after upgrading, the radio doesn't work. When I put single Sim card the radio is OK. Cause WM2005 has no STK? How to fix this problem? If it does not work, may be I downgrade to 2003se

MIDI Files
after i have installe WM5 i have tried to make my *.mid files to work as a ringtones but it doesn't work also windows media player does not recognize them.

Bluetooth
also bluetooth is weak i have noticed that 1. 3900 is little bit better than the one equipped with WM05

Re: MIDI Files
gwassef said:
after i have installe WM5 i have tried to make my *.mid files to work as a ringtones but it doesn't work also windows media player does not recognize them.
Click to expand...
Click to collapse
There is a fix for this... check buzzdev.net threads on wm2005

Images
Here is few screenshots

mamaich said:
I've made a fix for the backlight problem and integrated there ramram's CAB. See the first post.
Bubisch. I don't have sound problems.
icohen2005. On my device it is not slow, no problems with rings or phone pad. I use patched ROM version.
The only problem left is that it does not respond for several seconds to keypresses/screen taps after it is turned off and quickly on again. And SPB PocketPlus 3.0 today plugin slowsdown the device.
Click to expand...
Click to collapse
Mamaich thank you very much for this patch! now we can use the phone without charging it every day
Btw any step in the right way for camera problem?
And one more thing has anyone able to change that ugly splah screen?

hi sorry
sorry to make your high feeling but i still stuck what is patch rom version and wher can i download it i have the same the interner is the only one thing that
is nice and the sharpnes ofthe mobile so please help

problem since fix patch
Since the mamaich's fix, i can't light my ba
brightness is down, i don't know why
please help

BT Audio Streaming + Voice Command

Just sorted BT voice dialing on my TRINITY witha Jabra BT250 all working fine
using the infor here:
http://forum.xda-developers.com/showthread.php?t=281977
I've also mastered using BTAudioOn.exe in the registry in place of the voice dialer to give me Audio Streaming
Only problem is, as the article in the forun suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance

Try to use SKSchema software, it can put any values in registry depends of any window or process runing on the device. It watch & if you made a rule to put in registry key voicecommand with launcheAppEnable zero as window of TomTom appears u can get a continiusly sound in handsfree if also it put long value in Duration option.

Where do I fond the software please

Also... could you please explain a little better a I don't understand what you have written...sorry!

http://pocketgear.com/software_detail.asp?id=20385
& read help in windows directory after install

Summarized procedure for getting MSVC 1.6 to work with Kaiser

No attempts to claim credit for inventing this process (the PTT fix is in the Wiki, and the Cyberon bit has been around since the Wizard days), but this could be the first time it's been completely posted in one place.
Cheers!
-------------------
Step 1. Disable Cyberon
- Delete SDDaemon.lnk in \Windows\Startup
- Delete the Voice Dialer shortcut from \Windows\Start Menu\Programs (or whatever submenu folder it might be in)
[NOTE: if you don't delete the shortcut and accidentally click it (or launch the program directly from File Explorer), you may have to repeat the ENTIRE procedure]
- In each of these registry locations:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_ContextMenu
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_Tools
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Summary_Tools
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
- In this registry location: HKEY_LOCAL_MACHINE \ ControlPanel
----> Remove this key entirely: VoiceTagCPL
Step 2. Disable PTT and Enable PTT Button
----> Remove this key entirely: HKEY_LOCAL_MACHINE \ Services \ PTT
From HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
Step 3. Install MSVC 1.6
- Be sure to use the latest build, which can be found at http://www.sendspace.com/file/f48smf
< File Name: MSVC_US_PPC 1.6.17913.CAB Size: 3MB >
NOTE: this is licensed software; you should only download this update if you already have a licensed copy of MSVC 1.6
Step 4. Remap MSVC to PTT button (optional)
Step 5. Pair your headset
You should now be able to initiate MSVC from your BT headset and receive prompts thru its speaker. Finally, I can leave my phone in the case when I want to!
Enjoy!

BT button VC1.6 Activation
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers

Should have mentioned that this has been tested by me only on a Tilt with AT&T stock ROM...
You shouldn't have to worry about the PTT-related steps on a TyTN II (nothing there to disable).

goestoeleven said:
Step 1. Disable Cyberon
[/B]- Delete SDDaemon.lnk in both \Windows\Start Menu and \Windows\Startup
- In these registry locations:
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
Click to expand...
Click to collapse
So this seems to be a very straight forward process, easily followed by anyone that has any right to be mucking about in a registry. However, ()SDDaemon.lnk does not exist in \Window\Start Menu it does exist in \Windows\Startup
Also, Remove this key entirely... Where the hell is it?
All other steps work fine..
Russ741

well sort off...
The PTT is now maped to VC, very cool works good.
However VC is still not working properly, I can issue commands, (dial, call, time, etc) but the system will not announce calls or appointments. I used the same CAB I have used on previous installs that worked fine before.
Any ideas anyone?
Russ741

the fix
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741

Griffy wiffy said:
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Click to expand...
Click to collapse
I use a plantronic BT head set. To use VC on the tilt I hold the main button down on the head set until I hear the VC chime in. Takes about 4-5 of holding it down until VC kicks in. I hear about 3 or beeps during that time.

Russ741 said:
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Click to expand...
Click to collapse
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.

goestoeleven said:
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
Click to expand...
Click to collapse
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
That's from your posting and I am pretty sure that is what really fixed my issue. I was using the older ver of MSVC with my wizard and it worked fine. So, unless there is something really different about the OS build on the Tilt, updating the MSVC may have improved on things but I still believe this reg key is what did it.
BTW: I loaded the updated MSVC before I tried the reg change and this ver of MSVC does NOT make that change for you!
I recommend you update post1 to include this step.
Great job on finding that key by the way! THANKS!!!!!!
Russ741

Russ741 said:
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
Click to expand...
Click to collapse
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.

i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?

goestoeleven said:
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
Click to expand...
Click to collapse
Interesting, I tried a couple different copies of MSVC 1.6, including the CAB I used on my Wizard and didn't get announcements. It wasn't until I loaded the latest ver and put in the reg patch did it start working 100%. I admit I didn't test between the latest ver and the reg change (yeah I know I should have) so I can't say for sure which one did it.
Russ741

diar said:
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
Click to expand...
Click to collapse
That's very odd, normally the part that fails (for me at least) is the announcements or ring tone to the BT.
Can you initiate calls from the MSVC mapped key on the phone? That will narrow down if the prob is with the BT, MSVC or the phone itself.
Russ741

yes...i push PTT and VC functions just fine. i'll try that final reg change again and i'll soft reset and see what happens.
EDIT: i still can't initiate calls from the headset, however, this change does seem to have solved the low volume problem for me. just got a call, i heard the caller loud and clear and they heard me no problem.
so one problem down, one to go.

M$ VC still not working properly
I followed step in posting 1 to the letter and everything worked perfectly including caller ID voice announcement over bluetooth. But,when I soft reset or turn my phone off, I do not get voice announcement over bluetooth anymore. HELP!

Thanks! I like this concept ... I'll try it on my AT&T Tilt Rom.

Inconsistent results on various BT devices
Works great on my Jabra BT500.
On my Parrot CK3100 I get the "button only works once" behavior described in another thread - everything is great the first time I initiate VC from the car kit, but after that the phone's speaker and microphone are the only things active.
Next time the phone and car kit connect I get one more button push that works.
Argh. I'll search that other thread again, but I don't recall a fix for the folks that had these probs w/their headsets. (Any pointers are of course welcomed!)
Richard

Thanks a lot. This worked perfect for me. I am using an AT&T Tilt with helmi_c's Kaiser AKU.0.7.0 Cooked ROM and a Plantronics Discovery 655 headset.

VC with wired headset
I have a wired headset (HTC brand) and installed Voice Command, but cant get it to work from the headset button...does anyone know how I can activate from the button on headset?

i guess its safe to say you went into MSVC SETTINGS AND CHANGED the settings to wired headset? there has never been an issue with wired headsets just BT

Microsoft Voice Command

Hi, has anyone managed to install this, and get it to work? It doesn't install properly on my Diamond and I can only see settings for it, nothing under programmes.
I get an error along the lines of "programme not installed correctly" or something like that ... can't stand Voice Commander pre-installed.
Thanks, M.

same happend to me, but just ignore the mesage. it is installed anyway. afaik the icon for voice command always was under settings it never had one in programs.
i just installed it and it works fine, allthough it seems that the recognition is not as good as it was on my tytn. will see if it improves over time...
cheers
chaos42

Interesting. I set the button to be key 1 (same as where voice commander normally resides) and yet when I press it I just get a single tone beep response, not the normal multi-tone initiating voice command one.
Haven't tried it with my bluetooth headset yet as the charge has run out on it!
Also, has anyone figured out how to remove the installed Voice Commander?
Thanks, M.

works for me!
vc1.6 i installed it 5 times and did not work after i assigned my only f))king button it just one beep not like used to 3 beeps so i create a icon in programs dir and then link button to that it works perfect. perfect recognition if anything better and faster than any of my previos pda's

MS VC 1.7 freezes Daimond to hard reset
I Posted in another thread, but it should indeed belong here :
Hope to see a working solution for MSVC soon , an official fix from MS would even do fine.
http://forum.xda-developers.com/showpost.php?p=2323586&postcount=109
I flashed to Eslite 1.0, so i might give it another try now

I have MSVC 1.6 OK on my Diamond. It is true, that the installation tells me error when I install, but now it is OK. You can configure MSVC in Settings/Voice Command. Then:
1) you have to create link to voicecmd.exe (for example voicebtn.lnk), copy this link into \windows\star menu\programs
2) in settings/button assignment, you have to reassign long press of phone button to this new link voicebtn.lnk and now is MSVC functional

vphk said:
I have MSVC 1.6 OK on my Diamond. It is true, that the installation tells me error when I install, but now it is OK. You can configure MSVC in Settings/Voice Command. Then:
1) you have to create link to voicecmd.exe (for example voicebtn.lnk), copy this link into \windows\star menu\programs
2) in settings/button assignment, you have to reassign long press of phone button to this new link voicebtn.lnk and now is MSVC functional
Click to expand...
Click to collapse
i even did not get so far.
I tried to install 1.6 build 17913 on TLR Rom, though it gave this "unrecoverable error" again.
Rebooting resulted in a brick when tapping "settings" which forced a hard reset again damned
Will stick a while to Cyberon Voice command, though I liked MSVC better.

I have used MSVC_US_PPC 1.6.19209.bengalih.cab from pda4x.
No problem after setting Button1 to MSVC.

@ vphk
How did you make that link? Sorry neub

ceevee369 said:
i even did not get so far.
I tried to install 1.6 build 17913 on TLR Rom, though it gave this "unrecoverable error" again.
Rebooting resulted in a brick when tapping "settings" which forced a hard reset again damned
Will stick a while to Cyberon Voice command, though I liked MSVC better.
Click to expand...
Click to collapse
I suppose I am not the only one with this exact problem......I hope someone can solve this...

How to open websites in opera using voice command
I'm running a german version of MSVC v1.60.46220 and it's running very smooth. I read the tutorials and configured it to meet my needs. Now I want to open websites with opera using a simple command like "Start xda-developers". To do this I created a link (.url) in a subfolder of programs. This works with Pocket IE. To open the site in opera I changed the file association for the extension .url to \windows\OperaL.exe "%1%. Now opera starts but the home screen appears instead of the site that is linked. help appreciated

I cant get the talking ringtone to work on my diamond.
I adjusted the settings so it should work without an headset.
Do you have to adjust the ringtone somewhere?

Officer21 said:
@ vphk
How did you make that link? Sorry neub
Click to expand...
Click to collapse
to create the link mentionned by rxdoctor in post #4 :
1 - from your PC, go to \program files\voice comand on your pda (via Active Sync connection), create a shortcut here (like you would do for a file on your PC)
2- move this shortcut to \Windows\start menu\Programs on the pda
Then the name of this shortcut appears in the drop down list of programs you can assign to the button.
Now I have MS voice command working fine

[AP Request] Bluetooth Shortcut .EXE

Okay so I've gotten pretty spoiled now with the voice command on our phones. The one thing I REALLY wish I could do was turn the bluetooth on and off without having to go through all the work to get to the communications manager..(settings tab,then com manager, then bluetooth on or off... then closing it all down)
Is there something out there that is a direct short cut? I little .exe that will either turn bluetooth on if it was run or off if its run again? If not anyone with some skills want to make this happen? That would allow a quick shortcut in our applications tab AND for those of us who use voice command a quick way to turn bluetooth on and off. All we'd have to say is "Start bluetooth" or something. Best I've been able to do is say "Start bluetooth explorer" and it opens the bluetooth explorer...which yes works but I dont want that damn thing to open up AND I cant turn it off that way either.
If there is something out there similar to this I cant find it so maybe post it in this thread.
Thanks everyone!

BTonoff.exe
This is a little .exe that I found here on xda, so don't give me any credit. I looked and cannot for the life of me remember where I found this, so if whoever created sees this, I apologize for not giving credit.
Just put this unzipped .exe in the windows/start menu/programs folder and it will list as a program. You can then link the PTT button if you have a fuze, or to another quick launch program if that is what you are looking to do. I have mine set as an icon on the program launcher, and just click once and turns on BT, click again and turns it off.
If this is what you are looking for you can change from AP Request to AP Found.

This is a link to a cab file that I use called BT Toggle. The CAB file has "EkerB" in the name so I am guessing that is who the credit needs to go to. However I have been unable to find the original link back to the application announcement.
http://forum.xda-developers.com/showthread.php?t=411006&highlight=ekerb
Installs like any other cab file and has worked flawlessly for me. I have my left softkey set to run it.

Here you go. I think,this exefile is made by BuzzLightyear(thank you). You need to write a pareter to commandline(or shortcut) "bsd" to toggle discoverable/off mode. It can also do some different modes using different parameters(which I don't know now).

You can also use this little app and set it to one of your soft keys. I have it seft to my left soft key and it works flawless.
http://forum.xda-developers.com/showthread.php?t=422136