Database Develop

Voice Commands Over Bluetooth Works on TuMa v1.3 - WM5 ROM

I have posted This thread to assist anyone like me, who is not a programming whiz. Got to Install this mainly through trial and error and I am not an expert in this. So If anyone can make my steps easier please do!
This is a Variation Installation For a thread a while back in October 2005 Author Ncruz and effjay. Ncruz Posted a wm5 cab. This cab does not install directly due to permissions. However I have extracted the files using windows cab manager.
First are the files are required in windows. If it asks about permissions copy to PDA root folder then copy with Resco File Explorer and overwrite. Next are the registry files. You can import them with a registry program such as tre or regedit.
If you want Microsoft Voice commands to be the default program overwrite SSDialer.exe in windows folder with Voicecmd.exe from Program files/Voice command/ otherwise Cyberon Voice is initiated when you press headset.
I will post the cab in its entirity although it will not install, incase someone knows an easier method to get voice commands working Please contibute to this thread. However this method worked for me. Below in the zip are the files Extracted with Win Cab manager in zip format so you can copy zip to your pda then extract them to the correct folders, along with the registry files you need to import to registry.
N.B..sound of Voice commands is through PDA and not headset. Pressing headset connect button opens Cyberon or active voice command depending on what you have

Can not seem to be able to import the reg files....

OKay, got the files to import and the files copied - no go for me. Darn-it.

Installation
did you do a soft reset with the software built with the rom and repair the bluetooth headset

I might have reset without using the software reset....
However, got it working with this cab file that I found on my storage card. I even got MS Voice Command to work when I hit my BT Headset button.
Heck, it did not even change the record button to SSDialer! I would have thought it would but it did not. So, I am happy!

glad its working for you

now how can i do?
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?

I can't download files..... Where can I get them?

Re: now how can i do?
kriengkrai said:
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
Click to expand...
Click to collapse
The only way I know how to keep BT on is by plugging in my Device to a power source and doing a soft-reset. As long as I do not turn it off with the power button or have it set to auto-power off while plug in, BT will stay on. I do this everytime I get into my car - since it takes me a hour [sometimes more] to get home, so my BT Headset always works.
Hopefully I explained that correctly for you to understand....

Odie
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.

Re: Odie
MOHDWADEA said:
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Click to expand...
Click to collapse
Yes it happened to me as well, but i prefer BT Voice Command Activation than WLAN icon
Thanks for the info

BT activation doesn't work for me...
For some reason the activation through BT headset doesn not work for me.
I'm using WM5 TuMa 1.3 ROM.
The BA_WM5_Voice_Dialer_2.cab doesn't install on my device (permission violation), so I copied the files manually to the Windows folder.
The reg files also don't import to my registry when double-clicking, so I made the changes manually.
It still doesn't work.
Now, when I hit the button of my BT headset (Moto HS-810), the standard dialer is activated (instead of the voice command app) and I hear hissing sounds in the headset.
I tried it both with Cyberon and MS apps. Both don't work.
Did anyone encounter this problem? Anyone solved it?
Thanks.

anyone knpow how to do this with voice command on 2003se?

Just upgraded to TuMa 1.3 and have found a MUCH more simple way of doing it.
1) Install Microsoft Voice Command
2) Download Total Commander (http://www.ghisler.com/ce.htm)
3) Using Total Commander change the read only tickbox for \windows\sddialer.exe so that there is no tick (1 press just greys it out, i needed to press twice) <- browse to \windows in TC and right cick (hold down) on sddialer.exe, and click properties.
4) (you don't need TC for this) Copy %install dir%\voicecmd.exe (where %install dir% is the directory you installed voice command to) to a temporary location and rename it to sddialer.exe.
5) (using TC) 'Right click' on your new sddialer.exe (previoult voicecmd.exe) and select 'cut to clipboard' then navigate to \windows\ and 'right click' and select 'paste from clipboard', when propted overwrite the origional file.
6) press the button on your headset and test it!
the only thing we need now is for some clever person to work out how to route the voicecmd audio through to the headset instead of the load speaker (to my knowledge it uses the microphone on the headset allready (at least it works when i speak quietly from the next room )

it works like a charm
cheers

Do what Midlet says?
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?

Re: Do what Midlet says?
sgrbhtngr said:
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Click to expand...
Click to collapse
Have not investigated midlets way of installing as Mine is working. However i suggest that if you check your registry and see if the reg keys i posted within the zip are there. If his way works fine, if it does not i suggest you import the keys into registry and see if that helps. I also strongly suggest you make a note of the keys and where they are imported too, as if it does not work you can remove them.

It worked
Mohdwadea,
Your method worked! This time I performed a soft-reset after the installation and also re-connected the headset. I did not have to go he registry-entry route because the cab-file installed on my device.
This will help me a lot on the road in business. God bless you.

Just glad its working for you!

voice not sending
MOHDWADEA,
I am using this fix a lot on the road. It works very well... expect for in one situation! I can initiate voice dialing by the record button on my device and it accepts voice dialing commands through the bluetooth headset and teh call goes fine.
However, if I initiate the voice dialing using the button on my blueooth headset (Cardo Scala 500), it initiates the voice dial app just fine, accepts commands and conencts the call.... but the other party cannot get my outgoing voice through my bluetooth headset, rather it gets the voice from the mic on my phone. Also, the incoming sound can be heard in my bletooth headset but ALSO on the phone.
Any suggestions?
Thanks!
Sagar
I-mate PDA 2K
WM5 TuMav1.3

Summarized procedure for getting MSVC 1.6 to work with Kaiser

No attempts to claim credit for inventing this process (the PTT fix is in the Wiki, and the Cyberon bit has been around since the Wizard days), but this could be the first time it's been completely posted in one place.
Cheers!
-------------------
Step 1. Disable Cyberon
- Delete SDDaemon.lnk in \Windows\Startup
- Delete the Voice Dialer shortcut from \Windows\Start Menu\Programs (or whatever submenu folder it might be in)
[NOTE: if you don't delete the shortcut and accidentally click it (or launch the program directly from File Explorer), you may have to repeat the ENTIRE procedure]
- In each of these registry locations:
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_ContextMenu
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Main_Tools
HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Extensions \ ContextMenus \ Contacts \ Summary_Tools
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
- In this registry location: HKEY_LOCAL_MACHINE \ ControlPanel
----> Remove this key entirely: VoiceTagCPL
Step 2. Disable PTT and Enable PTT Button
----> Remove this key entirely: HKEY_LOCAL_MACHINE \ Services \ PTT
From HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Shell \ Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
Step 3. Install MSVC 1.6
- Be sure to use the latest build, which can be found at http://www.sendspace.com/file/f48smf
< File Name: MSVC_US_PPC 1.6.17913.CAB Size: 3MB >
NOTE: this is licensed software; you should only download this update if you already have a licensed copy of MSVC 1.6
Step 4. Remap MSVC to PTT button (optional)
Step 5. Pair your headset
You should now be able to initiate MSVC from your BT headset and receive prompts thru its speaker. Finally, I can leave my phone in the case when I want to!
Enjoy!

BT button VC1.6 Activation
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers

Should have mentioned that this has been tested by me only on a Tilt with AT&T stock ROM...
You shouldn't have to worry about the PTT-related steps on a TyTN II (nothing there to disable).

goestoeleven said:
Step 1. Disable Cyberon
[/B]- Delete SDDaemon.lnk in both \Windows\Start Menu and \Windows\Startup
- In these registry locations:
----> Remove this key entirely: {2C0E9904-F32D-4f53-875F-479F5CA81E18}
Click to expand...
Click to collapse
So this seems to be a very straight forward process, easily followed by anyone that has any right to be mucking about in a registry. However, ()SDDaemon.lnk does not exist in \Window\Start Menu it does exist in \Windows\Startup
Also, Remove this key entirely... Where the hell is it?
All other steps work fine..
Russ741

well sort off...
The PTT is now maped to VC, very cool works good.
However VC is still not working properly, I can issue commands, (dial, call, time, etc) but the system will not announce calls or appointments. I used the same CAB I have used on previous installs that worked fine before.
Any ideas anyone?
Russ741

the fix
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741

Griffy wiffy said:
I have a HTC branded TytnII and there is no PPT reg entry. Also the keys
From HKLM\Software\Microsoft\Shell\Keys
- Add a new key called "40C6"
- Add a string under the key called "Name" with the value "Button 6"
- Add a new key called "40C7"
- Add a string under this key called "Name" with the value "Button 6 (hold)"
already exist. So..
this didnt work for me. If i push the button on my BT headset it redials the last number.
Button 6 is the Voice command button near the wheel so i cant see how the BT headset button is going to work??
any help would be great as this is then only function missing from a great device.
cheers
Click to expand...
Click to collapse
I use a plantronic BT head set. To use VC on the tilt I hold the main button down on the head set until I hear the VC chime in. Takes about 4-5 of holding it down until VC kicks in. I hear about 3 or beeps during that time.

Russ741 said:
If anyone else is having issues with call announcements look here for the fix.
http://forum.xda-developers.com/showthread.php?t=333260
Mine is now 100% and I can go back to my real job!
Russ741
Click to expand...
Click to collapse
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.

goestoeleven said:
I can confirm that with the procedure in #1, along with the update CAB from the above link, I'm now getting incoming calls announced, too!
Procedure in #1 has been updated accordingly.
Click to expand...
Click to collapse
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
That's from your posting and I am pretty sure that is what really fixed my issue. I was using the older ver of MSVC with my wizard and it worked fine. So, unless there is something really different about the OS build on the Tilt, updating the MSVC may have improved on things but I still believe this reg key is what did it.
BTW: I loaded the updated MSVC before I tried the reg change and this ver of MSVC does NOT make that change for you!
I recommend you update post1 to include this step.
Great job on finding that key by the way! THANKS!!!!!!
Russ741

Russ741 said:
@goestoeleven: did you not put in the registry change?
4. Lastly, you must modify this registry entry in order to use your Bluetooth headset with Voice Command:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe
Click to expand...
Click to collapse
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.

i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?

goestoeleven said:
This key is not necessary with MSVC 1.6 (it was with MSVC 1.5). I'm running just fine without it.
Click to expand...
Click to collapse
Interesting, I tried a couple different copies of MSVC 1.6, including the CAB I used on my Wizard and didn't get announcements. It wasn't until I loaded the latest ver and put in the reg patch did it start working 100%. I admit I didn't test between the latest ver and the reg change (yeah I know I should have) so I can't say for sure which one did it.
Russ741

diar said:
i still can not initiate voice command from my headset. everything else works fine. i hear announcements, i can answer and hang up phone calls (the voice quality is still horrible), i get reminders, etc. but when i press the button to activate, it just opens the phone app.
is there something missing?
Click to expand...
Click to collapse
That's very odd, normally the part that fails (for me at least) is the announcements or ring tone to the BT.
Can you initiate calls from the MSVC mapped key on the phone? That will narrow down if the prob is with the BT, MSVC or the phone itself.
Russ741

yes...i push PTT and VC functions just fine. i'll try that final reg change again and i'll soft reset and see what happens.
EDIT: i still can't initiate calls from the headset, however, this change does seem to have solved the low volume problem for me. just got a call, i heard the caller loud and clear and they heard me no problem.
so one problem down, one to go.

M$ VC still not working properly
I followed step in posting 1 to the letter and everything worked perfectly including caller ID voice announcement over bluetooth. But,when I soft reset or turn my phone off, I do not get voice announcement over bluetooth anymore. HELP!

Thanks! I like this concept ... I'll try it on my AT&T Tilt Rom.

Inconsistent results on various BT devices
Works great on my Jabra BT500.
On my Parrot CK3100 I get the "button only works once" behavior described in another thread - everything is great the first time I initiate VC from the car kit, but after that the phone's speaker and microphone are the only things active.
Next time the phone and car kit connect I get one more button push that works.
Argh. I'll search that other thread again, but I don't recall a fix for the folks that had these probs w/their headsets. (Any pointers are of course welcomed!)
Richard

Thanks a lot. This worked perfect for me. I am using an AT&T Tilt with helmi_c's Kaiser AKU.0.7.0 Cooked ROM and a Plantronics Discovery 655 headset.

VC with wired headset
I have a wired headset (HTC brand) and installed Voice Command, but cant get it to work from the headset button...does anyone know how I can activate from the button on headset?

i guess its safe to say you went into MSVC SETTINGS AND CHANGED the settings to wired headset? there has never been an issue with wired headsets just BT

Untrusted Application

I have just installed Opera Mini 4 Beta 2 on my Tilt.
I'd like to use it as my default browser, however it's annoying that every time I open it I get asked if I really want to allow it to connect because it is an "untrusted application".
I have an unlimited data plan, so I want to change it to be a "trusted" application so I don't have to tell the Tilt it is ok to use every time I open it.
Sorry for the newb question. I didn't see a lot on a search.
Thanks!

http://forum.xda-developers.com/showthread.php?t=332087&page=2

Schooleydoo said:
http://forum.xda-developers.com/showthread.php?t=332087&page=2
Click to expand...
Click to collapse
Hey, that's perfect! Thanks, you rock!

Ok, after trying everything in that thread I am still having some issues and it appears that there is at least one other guy that can't get it to work on the Kaiser (I have the Tilt).
I've tried hex editing the selector.utf file myself as well as downloading the fix.exe file that is provided in that link and neither one works.
I have the Opera Mini browser mapped to the PIE button just fine, but the problem is getting the "untrusted" thing to go away.
When I change the selector.utf file so that the line reading "domain=untrusted," is now "domain=tckmax ," when I press the PIE button I get an error that says:
"Could not find suite s0_"
However, I can see that the s0_suite.utf file is in my appdb directory.
Any ideas?
Thanks!
ETA: I've seen some mention "cloudyfa's" jbed will work. Where can I get that jbed? Search turned up nothing.

Anyone?
I haven't been able to get this to work. I think it has to do with the jbed that I am running (stock jbed that came with the tilt).
The only info I could seem to find was that some guy named cloudyfa has a custom jbed that will get rid of the "untrusted" warning, but searching hasn't come up with anything on cloudyfa.
Can anyone help point me to a jbed that will work?
Thanks!

have you tried kaiser tweak, there is a function to disable warning.
kms

http://forum.xda-developers.com/showpost.php?p=1483665&postcount=24

VTX said:
Ok, after trying everything in that thread I am still having some issues and it appears that there is at least one other guy that can't get it to work on the Kaiser (I have the Tilt).
I've tried hex editing the selector.utf file myself as well as downloading the fix.exe file that is provided in that link and neither one works.
I have the Opera Mini browser mapped to the PIE button just fine, but the problem is getting the "untrusted" thing to go away.
When I change the selector.utf file so that the line reading "domain=untrusted," is now "domain=tckmax ," when I press the PIE button I get an error that says:
"Could not find suite s0_"
However, I can see that the s0_suite.utf file is in my appdb directory.
Any ideas?
Thanks!
ETA: I've seen some mention "cloudyfa's" jbed will work. Where can I get that jbed? Search turned up nothing.
Click to expand...
Click to collapse
OK, you can't just replace "untrusted" with "tckmax". you have to pad it with spaces to the same length. I.e. replace "untrusted" with "tckmax ". That will eliminate the "cannot find S0_..." issue. However, I do that, and I still get the nag messages.

OK, the tckmax fix seems not to work for my stock java Esmertec JBed that was on the Kaiser ROM. I installed this Cloudyfa version (which has a different/more recent build date) and voila, it works now without the nag...Thanks for the link to the latest version!

Can you copy your quick launch icon for me? I just cant seem to get the .ink to work. I dont know is it that TC cant make it right, i read it somewhere.

Well, you can't just copy someone's because it depends on what other java apps you have installed on your phone.
but the easiest way to create one is to simply use a Notepad to create simple text file. And it should only contain the following text:
28#"\windows\jbed.exe" -run s1_
BUT you may need to edit it and replace the S1_ with something else. if this is the only Java app you have installed and used, then most likely you want to use S0_ in place of S1_.
Name it Opera.lnk (or whatever you want it to say).
And then copy it to your "\Windows\Start Menu\Programs" folder.

Thanks to you guys who figured this out. This one of the little annoying things
that ticked me off. I'd have to first: click on the java shortcut, then click on opera mini, then click on yes to permissions, then yes to connect.
Now I just click on the Opera mini shortcut and BOOM! Up and going, plus I have the IE button reassigned as Opera Mini
THANKS!

jomo25 said:
Well, you can't just copy someone's because it depends on what other java apps you have installed on your phone.
but the easiest way to create one is to simply use a Notepad to create simple text file. And it should only contain the following text:
28#"\windows\jbed.exe" -run s1_
BUT you may need to edit it and replace the S1_ with something else. if this is the only Java app you have installed and used, then most likely you want to use S0_ in place of S1_.
Name it Opera.lnk (or whatever you want it to say).
And then copy it to your "\Windows\Start Menu\Programs" folder.
Click to expand...
Click to collapse
Tried that, only thing i get is a non working .ink file. Closest ive got on creating the working quick launcher is with TC. It just opens the java applet and says could not find suite s0_.
I think the easiest way would be if some one is kind enough to copy me the working file. I have the Cloudyfa's EsmertecJbed intalled and it is s0_ where it needs to point to. I got rid of the nag, only thing that isnt working is the straight shortcut to open Opera.

i have'nt tried opera, but has anyone tried installed the kaiser tweak, there is a function to disable security warnings.
kms

Attached for S0_. Had to ZIP it so can upload.
Never used KaiserTweak. But I did get the nags to stop via my actions above. Not sure if KT would eliminate it.

Thanks, that one worked straight away. Strange, but it must be that what a read in some post about Total Commander not doing the shortcut right.

Any ideas is it possible to get a quick launch button straight to Opera on TrayLnch?

Anyone? Is it possible?

kms108 said:
i have'nt tried opera, but has anyone tried installed the kaiser tweak, there is a function to disable security warnings.
kms
Click to expand...
Click to collapse
BTW, Kaiser Tweak doesn't suppress these security messages. Its a different kind of msg it suppresses.

did anyone ever get this to work for mini 4.2? I've been battling it for a couple hours now with no success. I've tried editing the utf file, but I always still get the untrusted app and network access prompt. Any pointers would be greatly appreciated. Thanks.

Accessing Add/Remove appz without going to settings (WM Settings screen is crashing)

How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.

jh20001 said:
How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.
Click to expand...
Click to collapse
You can uninstall software with SKTools. Download a trial version from Handango and try it. If you like it, buy it! My guess is you will probably have to do a hard reset anyway to clean up that mess.

Ill do that. I'll use SKtools on his phone to remove MS Voice Command next week.
Has anyone else had this problem? It would be great for him to have Voice Command. He's been drooling over the feature on mine so long. Now that he finally has a kaiser, he can't use it because it doesn't want to work on his. No fun.

Another easy way would be to use Activesync Add/Remove Programs feature on a connected computer

I don't think he has access to a computer but I will keep that one in mind. We hadn't even had a chance to use the sktools option yet since he got sick so I haven't seen him around in a bit.
I really wish the program would have worked :/ I might try reinstalling it again ontop of itself....could do the trick. Maybe the program corrupted itself the first time some how.

version
this happend to me before, it was the version msvc i was had installed i dont remember which version though.

eisean said:
this happend to me before, it was the version msvc i was had installed i dont remember which version though.
Click to expand...
Click to collapse
This is, this is 1.6 and there is nothing newer

You could also simply create a shortcut/link that goes directly to the Add/Remove Programs settings screen.
Try putting this code in a .lnk file:
Code:
Settings>System>Remove Programs = 21#ctlpnl cplmain.cp,10
It will allow you to bypass the main Settings screen that crashes.

[AP Request] Bluetooth Shortcut .EXE

Okay so I've gotten pretty spoiled now with the voice command on our phones. The one thing I REALLY wish I could do was turn the bluetooth on and off without having to go through all the work to get to the communications manager..(settings tab,then com manager, then bluetooth on or off... then closing it all down)
Is there something out there that is a direct short cut? I little .exe that will either turn bluetooth on if it was run or off if its run again? If not anyone with some skills want to make this happen? That would allow a quick shortcut in our applications tab AND for those of us who use voice command a quick way to turn bluetooth on and off. All we'd have to say is "Start bluetooth" or something. Best I've been able to do is say "Start bluetooth explorer" and it opens the bluetooth explorer...which yes works but I dont want that damn thing to open up AND I cant turn it off that way either.
If there is something out there similar to this I cant find it so maybe post it in this thread.
Thanks everyone!

BTonoff.exe
This is a little .exe that I found here on xda, so don't give me any credit. I looked and cannot for the life of me remember where I found this, so if whoever created sees this, I apologize for not giving credit.
Just put this unzipped .exe in the windows/start menu/programs folder and it will list as a program. You can then link the PTT button if you have a fuze, or to another quick launch program if that is what you are looking to do. I have mine set as an icon on the program launcher, and just click once and turns on BT, click again and turns it off.
If this is what you are looking for you can change from AP Request to AP Found.

This is a link to a cab file that I use called BT Toggle. The CAB file has "EkerB" in the name so I am guessing that is who the credit needs to go to. However I have been unable to find the original link back to the application announcement.
http://forum.xda-developers.com/showthread.php?t=411006&highlight=ekerb
Installs like any other cab file and has worked flawlessly for me. I have my left softkey set to run it.

Here you go. I think,this exefile is made by BuzzLightyear(thank you). You need to write a pareter to commandline(or shortcut) "bsd" to toggle discoverable/off mode. It can also do some different modes using different parameters(which I don't know now).

You can also use this little app and set it to one of your soft keys. I have it seft to my left soft key and it works flawless.
http://forum.xda-developers.com/showthread.php?t=422136