Hi.
If you need Finnish or Swedish keyboard layout for your Touch Pro download it here.
Install to device -> soft reset.
- ä = Fn + a
- ö = Fn + o
- å = Fn + p
IMBA! ill try it out now
Thats for t9. It does not help making the Hardware keyboard make åäö.
Im using Nrg Rom and if your nor suplied with the swedish flies this does not work...
t9 works fine thoe. but nothing allse.
The hardware keyboard is a easy regedit to make it swedish,
HKLM\HARDWARE\DEVICEMAP\KEYBD\
Change CurLang to 1044 and softreset for swedish hardware keys.
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
no problems for me using the same rom, you did install the touch pro keyboard cab right?
jimmyhawkin said:
your not lissning. even thoe i do that with the nrg rom you still dint get the åäö to show upp! like i said. in all the software modes when using the screen too klick it works without a problem.
But as soon as a switch over and open upp the hardware keyboard it will not typ åäö. If i do Fn + O for exampleall it does is make a normal o...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=430208&highlight=hardware+keyboard
And use this tool to change the layout from a fuze rom keyboardlayout, to a "htc" rom keyboard
Or my newest creation: http://forum.xda-developers.com/showthread.php?p=3512681
Hi there m8. Even with your program it still does not help me. If you open upp my Phne and start using my Hardware keyboard with the nrg rom it wont make Ö when i do FN + O....
I just get a normal o.
So im not doing anything wrong and what it seems is that everyone does not understand that this is not the REGISTRY that is the problem. Or if the keyboard is set to fuzz or HTC keyboard.
It seems as if the Swedish files are not in Nrgs rom so ÅÄÖ wont show no matter what registry fixes you do.
So i think that what is needed is the Swedish files in order for this to work. NOT any registry fixes... Do you understand my problem now?
Cause i used your program. I have tried about 5 diffrent regfiles witch realy does about the same thing
and as i see your program is allso just a reg changer that changes the curlang 2 = 41d
Witch beliave me or not its set 2 and i still only get a o when typing FN + O witch should then become a Ö
what version of the nrg rom are you using?
i have ran 1.5, 1.6, 1.7 and 1.0 (1.8) and all of them are fully capable of running the Swedish hardware keyboard.
install the touch pro keyboard cab located in the nrg rom thread softreset, change curlang to 1044, softreset and thats it.
Im not sure what files you are after, i can´t recall that i have ever read about any language files for the hardware keyboard, T9 yes not not hardware keys.
if you are running the 2.x series im am fully willing to flash my rom and try the exact same think since im confident that it will work.
Please answer this question:
Did you or did you not install the touch pro keyboard cab for the nrg rom?
Use 2.0 and used the keyboard changer thats in the rom.
???
Hi.
I have used that cab with almost every EnergyROM version there has been (including betas) and that cab has always worked fine. I also tried one 6.5 version and this cab was not working with it - allthough, I did not try very hard...
Things I do:
- change regional settings -> Finnish
- change keyboard layout to Touch Pro
- install the cab
- soft reset
=> now it should work...
@6sto
Tried to do exactly what you wrote, but without success.
I am using EnergyROM Series 2.0 Build 32409
Ouch
Sorry to hear that it didn't work. I apologize but I can't help you any more with this. I hope we have much better helpers here in XDA-developers. Can you help with this issue? Everything is working OK with my Touch Pro!
---
Hey, have you tried this? http://forum.xda-developers.com/showthread.php?t=496876
I figured it out.
The danish keyboard layout and norwegian is the same. So if I choose norwegian it works
not sure what to say, just flashed the latest nrg 2.0 as i promised, changed keyboard with the provided tool, power cycled like i was prompted to do, changed curlang to 1044 and softreset, and now i have my Swedish hardware keyboard.
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
jimmyhawkin said:
Do you realy have ÅÄÖ visual when typing FN + o on the hardware keyboarD? i failt do think you do that. on t9 yeh. but not on the hardware keyboard.
Click to expand...
Click to collapse
Yes, i dont use T9 at all, only hardware keyboard.
Please write in detail what you are doing after you hardreset your device.
follow the steps like both i and others have written in this thread, dont skip any steps and it will work for you.
jimmyhawkin said:
And with Nrg rom 2.0 i changed to nor fin swe dk well all but still when typing fn+o i get = o.
And used the keyboard program so its Htc keyboard and not fuzz. Nothing will do it it seems.
Click to expand...
Click to collapse
you do change the regkey to 1044 in decimal value and softreset after you change the keyboard layout to touch pro right?
in the 2.0 all you need to do is change to touch pro keyboard and then change curlang to 1044 decimal value and softreset, that is it.
im not sure how to help you, i even flashed the 2.0 to test it for you, no problems at all, i honestly suggest you start looking at what you are or are not doing compared to the guides.
Follow the guides we wrote for you and it WILL work.
Good luck.
It is acualy as you say. If you direcly after installing the rom do as you say it will work. BUT here comes the tricky part.
What if you want both the hardware keyboard to work. And the t9?
Cause id realy like to have the phone as it is in the swedish vertion. Were both are working.
Cause as of now i know how to get either t9 or hardware keyboard working but not both.
Anyone that knows a solution to getting the t9 in swedish when you have hardware working?
Related
I updated today my SPV M3000 from ROM version 1.3.1.11 FRA to the new official version from Orange 2.16.1.3 FRA.
All worked ok. But now the keyboard layout is wrong. When I push the key A in the screw shows the Q.
I need help to now where I can change that.
[/img]
Not 100% sure if it applies to the newer rom:
http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
I do that and the key "A" and "Q" work well, but the key "Y" and "Z" are wrong. And also the symbols on the keys, like @, *. etc....
I check with a lot of diferent codes but nothing positive.
I have really a big problem!!
I do that and the key "A" and "Q" work well, but the key "Y" and "Z" are wrong. And also the symbols on the keys, like @, *. etc....
I check with a lot of diferent codes but nothing positive.
I have really a big problem!!
So the reg edit there for the Locale -did- change something, at least?
If so - I guess you just need a different Locale than the 'French' one. What is the physical layout of your keyboard itself? i.e. the three rows of letters on the slide-out keyboard
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
use AEKMap
techsc said:
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
Click to expand...
Click to collapse
...sound logical - but where I can do registry settings on the WIZARD ? Which prog is needed ?
Hints are very welcome, cause I flashed my german version (VDA II from Vodafone) with the QTEK eng ROM and have the same problem with the keyboard layout now !
Thanks,
Joe
techsc said:
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"Locale"="0407"
reset device after that.
Click to expand...
Click to collapse
...sound logical - but where I can do registry settings on the WIZARD ? Which prog is needed ?
Hints are very welcome, cause I flashed my german version (VDA II from Vodafone) with the QTEK eng ROM and have the same problem with the keyboard layout now !
Thanks,
Joe
look for...
- PHM Regedit
- Tascal Registry Editor (TRE)
which are the two popular free ones
- Total Commander CE
has a registry editor built-in. does fast searches, but I wouldn't use it for editing much. also free
And there's a few commercial "does everything" ones that include registry editing
Other than that - if you're familiar with the registry on your desktop machine - you should be ready to go
Bug on my virtual phone keyboard and compact qwerty keyboard : impossible to type letters. Only numbers are displayed. My full qwerty keyboard works.
I had install and uninstall many keyboard like PCM, touchpal etc.
Thanks a lot !
Fafou
My case is worst then yours . All three HTC keyboards are numerics only. But the regular WM SIPs works fine.
Anyone got an answer to that?
Have you tried a different rom? might help...
disable the " Turn on one touch" option and it works again.
Got the same bug, and the only fix is to disable this option.
But you can do a soft reset and enable this option again and it should work normal again.
Havent figued out the reason of this bug yet, but i think it has something to do with editing the contacts.
btw, which hardspl version do you use?
slicker said:
Have you tried a different rom? might help...
Click to expand...
Click to collapse
I think its a bug on the 1.93 wwe roms, got it on every wwe rom except swifts 5.0. But 5.6 got this bug too.
I get the same problem if i have PCM player keyboard installed.
uninstalled it and a reboot fixes it... but i love PCM keyboard.
I'm on 1.37 Nor btw.
I'm using stock 1.93 ROM. full QWERTY was working for 2 week... till 2 days ago. I have reverse all the tweaks I made for the pass few days and it didn't help.
I think I'll try install a PCM trial and see if that helps.
Keyboard now working is a big issue. I hope HTC will publish a hotfix soon.
Installed PCM... all the HTC SIP still not functioning. But the hell with them... I like PCM better now.
Hope some one finds a fix. I want both PCM keyboard and the orignal ones.
Lobo13 said:
I have found a solution. Change this in the registry:
Code:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
[/quote]
Works after a reboot on diamond :)
Click to expand...
Click to collapse
Hi,
I don't know what I've done, but when I'd like to write some message, or whatever, the original keyboard (full qwerty, or compact qwerty) keyboard starts up with the symbol pad and it's not possible to switch it back to alphanumeric mode. The only way is to invoke keyboard switch menu and select the same keyboard again. then it works as usual. Does anybody have the same problem?
as I said, I don't know, what I've done, or installed, bud I think, I've installed Advanced config 3.0 recently
I have the same problem... I also don't know what is wrong.
I also tried to disabled T9 with some tricks... that's all...
Some suggestions??
Thnx
Since yesterday I also have a problem with my HTC keyboards.
All 3 options, Qwerty, Compact Qwerty and the phonepad only gives me numbers.
I have tried all the settings.
It does not make a diverence if i turn of T9.
On the keyboard i can see the nummbers and the letters.
This is very irritating, can somebody please help?
Or is there an original cab version, al the cabs i can find are Qvga.
I have tried the Touch keyboard and it gives letters in stead of numbers, but its Qvga.
Thanks
Same problem here on the CDMA Diamond, I tried two different ROMs already the Sprint Stock ROM and a Telus Custom Juicy's 2.0 ROM. I can't use it at all and I hate doing a Hard Reset. Someone shed some light on this please.
Same problem here, have tried everything
Well I solved the problem by uninstalling PCM Keyboard... Too bad, I really liked it
Does anybody know if it's possible to run pcm keyboard without having this issue on the diamond?
since day 1 my keyboard did not show predict text ? anyone can help me ?
I had the same problem , it appeared from nowhere ..
After also trying different tricks , i solved the problem using Resco Keyboard
Pro ... It also responds much better to my taste with the touch screen
interface of the diamond.
I have had this problem on the Touch Pro too having used PCM keyboard.
Unistalled it and all back to normal.
Pity.
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
chris2.0 said:
Same here, alas PCM's copy & paste was cool, but not if I can't use the other keyboards...
Click to expand...
Click to collapse
How do you use copy & paste with PCM? Which version of PCM keyboard are you using?
Is a Nordic Keyboard available somewhere here?
If someone can tell me how to extract keyboard (possible?) I can dump it from my ROM. Bought from Finland and it has all nordics.
tunppi said:
If someone can tell me how to extract keyboard (possible?) I can dump it from my ROM. Bought from Finland and it has all nordics.
Click to expand...
Click to collapse
In theory all the keyboards should be available in all phones, it's the registry setting that would be nice to know, so if you could post the tegic reg it would be nice.
You would find it in HKLM/software/tegic
Thanks
Garcia
Garcia said:
In theory all the keyboards should be available in all phones, it's the registry setting that would be nice to know, so if you could post the tegic reg it would be nice.
You would find it in HKLM/software/tegic
Thanks
Garcia
Click to expand...
Click to collapse
Can you be more exact? there are like hundreds of registrys in that folder HKLM/software/tegic/eT9
None in ../tegic exept that folder
Just save the HKLM/software/Tegic registry folder as the "hundreds" of entries describe what keyboard layout, what tegic wordbook to use and so on and so on.
I actually added Danish to my HK version by adding all the registry setting for Danish in to that folder
any news on this?
I've installed duttys rom, and the first impression is great. Only played with it for half a day.
I installed the old blackstone keyboards (which I found in a xperia-thread) and the 14 languages t9-cab, and can now type with norwegian t9. The thing is that the keyboard layout is english, so I have to remeber where they norwegian keys are put on the compqact qwerty.
Anyone got a solution?
A nordic keyboard for these new ROMs would be great. Is it available?
I am using Davideuck's V3 Rhodium and the only thing i miss is the nordic keyboard layout.
To gather everything up nicely..
T9 Input 14 Languages Update.cab (2.3 KB)
http://forum.xda-developers.com/attachment.php?attachmentid=94698&d=1214149758
This only adds the option to select the language i want. When writing with XT9 enabled in the full qwerty nothing shows up on screen. If I set it to ABC it works. Keyboard layout is still english, or at least without æ, ø and å witch are the Norwegian characters I would like to get on my keyboard.
Then I will need some dictionary file to add XT9, right? Where can I get that?
Also, when my full qwerty works with XT9 I would prefer to move another step; how do I get compact qwerty with XT9 and nordic (æøå for me) characters?
I lost the compact qwerty when I flashed my ROM with some Dutty-ROM. Oh, and don't get me wrong. His ROMs are fantastic, but I would still love to have compact qwerty
Tried This: http://forum.xda-developers.com/showthread.php?t=462284
I installed this reg attached as zip file in this post, and got XT9 working but no keyboard layout in Danish. Maybe the new keyboard is not meant to be like that? Its maybe supposed to be like the Iphone where you keep pressing "o" to get ø etc..? Because this is working fine.. and even the XT9 is suggest words when you use the "o" instead of ø when writing the words.
hmm
I downloaded the cab mentioned in the previous post. It's a 6MB file and it gave me an error message 5 seconds in the install process
"Installation of Touch-IT_Blackstone_Nor_swe_Den_Fin.cab was unsuccessful."
Oh well... I feel like I have searched the entire web twice for this, but finding dictionaries for other languages proves to be difficult. I could even settle for only Norwegian
Matti23 said:
Is a Nordic Keyboard available somewhere here?
Click to expand...
Click to collapse
This is what i use.
It's not the latest HTC version ( I find the latest much slower anyway), but it works.
Install the keyboard first, then the dictionary.
Nordic Keyboard
I think there's are still missing files needed to make the latest HTC keyboard into Nordic through registry settings.
Oh joy
Blessings.. it worked!
I have the problem that I'm a danish user, but I use dutty's rom with the new ezimput 2.0 keyboard, but no danish language exist yet to that one.
Now when I try to install the original HD keyboard, the "phone keypad" doesn't work anymore, and hence make it impossible to use T9. It works with full QWERTY, but my fat fingers doesn't work well on that one.
Anyone have the same problem, and have found an solution?
What do you mean that no Danish language exist for that.
Phone keyboard is having "ø" under "mno" button and just like normal multitap.
If it's the T9 you are looking for then use the attached reg key and you'll have Danish added to the language list.
I'm using Dutty 3.3 and it works without problems.
Garcia
Garcia said:
What do you mean that no Danish language exist for that.
Phone keyboard is having "ø" under "mno" button and just like normal multitap.
If it's the T9 you are looking for then use the attached reg key and you'll have Danish added to the language list.
I'm using Dutty 3.3 and it works without problems.
Garcia
Click to expand...
Click to collapse
Thanks for the reg file.
I didn't know you were able to have danish on the new ezimput 2, as they state on the thread in "dev and hacking" that it only supports eng, ger, fre, spa etc.
From were do you get the ldb files and kdb files? Or are the danish one included in the dutty rom? Or can you please upload those files aswell?
-offtopic-
I have used my diamond for almost a year and really enjoys it, so now I thought that I would go to the HD. - And I feel like a beginner again. What rom is the best, what is the new essentials etc... :-/
I used the dic file from one of the oploads in this thread, and it worked beutifull. Thanks.
More Languages on ezimput2 from Topaz
This file enables more T9 languages on the latest keyboard.
Layout will be the same.
Did anyone find any solution to the compact keyboard?
In my opinion the compact keyboard is the best one, but in Duttys rom's it doesnt exist.. and Duttys rom is really great so I dont wanna change rom.
The perceft solution would be Dutty rom + Compact keyboard with working T9 swe lang.
please please... tell me that someone solved this...
Here's a mod on the previous Danish reg file to make it work for Swedish instead.
Quist said:
Here's a mod on the previous Danish reg file to make it work for Swedish instead.
Click to expand...
Click to collapse
Thank you!
Tackar!
I have a Touch Pro that was bought with a French WM6. I update it with a original HTC English Rom update and everything works fine. I would only like to change the keyboard back (probably should have backed it up before I did Rom update) to azerty. Can anybody tell me how to do that for the hardware keyboard and the onscreen keyboard?
I tried the procedure that makes you change the register key but don't work for me.
I've seen some .cab files going around to make these changes for many other languages, does it also exist for Dutch (Belgian) of French (Belgian).
Thanks
Please ignore this thread
Will start a new one cause this is not accured anymore.
i don t know
i know just use BDR to change the value but i am not sure