I have searched everywhere and have not come across anything on this issue, so I am hoping that someone here might have some insight. I also posted this on PPCGeeks.
After my phone has been running a while, the Call Status screen, the one with the speakerphone, mute, and big red end call button, just dissapears. The only thing I can see is the menu for keypad, otherwise it just shows whatever my last current screen was.
Any idea why this is happening? The only way to fix it is to soft reset the phone. I am wondering if a tweak might have created this problem.
I have the Sprint Diamond with stock rom.
Thanks in advance...
Ceger
Related
Sorry if its a repeat but I searched a lot before posting this.
My Tilt (with Dutty's ROMs and other stock ROMs as well) when calls are coming, my screen lights up but the hard buttons don't light up so in the dark its hard to pick up the phone. Is there a fix for that?
Thanks.
There was a Thread on this, albeit without any solution.
Anyway I have got used to pressing the soft key on the screen when a call comes in when I am in the dark
srmz said:
There was a Thread on this, albeit without any solution.
Anyway I have got used to pressing the soft key on the screen when a call comes in when I am in the dark
Click to expand...
Click to collapse
That's true, TBH I always press the softkey to answer calls, don't know why though . I suppose i think, "I've got a touch screen, I'm gonna make the most out of it"
I wish I had a better interface for incoming calls like Palm's or iPhones where I have two big buttons on the screens, Accept call or Ignore call. Is there a dialer like that???
when i had my Wizard (MDA), if i got a call or text message, the hard buttons would light first then the screen...which was helpfull so i can answer the phone before the phone even rings (on my end and the other persons end)
Is there a way to lock onscreen phone buttons?
Everytime someone calls, and diamond is in my pocket I either accept or reject call when trying to get it out of pocket.
So can I dectivate touch screen during incoming call?
Is there any tweak for this?
Greets guys
dont own a diamond but a quickfix...get bigger jeans.
No way... too big balls will bounce
resolved!!!
the fastest way to solve your problem is to install s2u2 (slide to unlock) newest version is 1.05 what i know...
so with the right settings when incoming call, you'll need to slide then answer/reject call or setup slide to answer or other.
its great i LOVE IT..
I just installed it... then uninstalled it 5 mins later because it looks GHASTLY!!
To lock the touch screen buttons you simply hold down the End Call button for a few seconds. Or is it the physical buttons that you're trying to lock?
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
lookass said:
You didn't get it
I want touch screen buttons to be locked DURING incoming call to be sure i wont press them when trying to put it out of pocket.
Even if diamond is locked, when phonecall screen appears, those buttons are ACTIVE and that is baaaaad
and S2U2.... doesn't work!!!
When incoming call, original diamond call screen appears and buttons are ACTIVE - su2u DOES NOT lock device during the call although there's option called 'slide to answer'
Click to expand...
Click to collapse
You are right: I do not get you.
At least I do not see your point. You want to have the phone locked during incoming calls? - how senseless is that. Especially in that moment I want to have it unlocked to be able to accept it. That is the way all my phones worked.
What do you do, if you get a call and have a your cell in the pocket? I never encountered such problems...
Jeeeeeeeezzzzzzzz !!!
In Diamond one can answer a call in two ways:
1. press onscreen button
2. press hardware button
Onscreen button can be pressed accidentaly while taking out of pocket, pouch or whatever.
So: All i want is to have onscreen buttons INACTIVE while hardware buttons ACTIVE so I can answer call ONLY by pressing answer HARDWARE button.
Tapping onscreen button will do NO ACTION.
Hope now everything is clear, cause my english isn't very good
^^and you made a joke when i offered my quick fix =P
I have the same problem that by the time I get the case out of the case i find that I accidently answered or hung up because I accidentaly touched the screen,I tried slide to answer but it is not working properly on the Diamond
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
s2u2 not working?????
if its bad, ugly, or something, put an self image as backgruond, maybee that would cheer u up, im using version 1.00 that dosent got the slide to answer working good(beta), so i turned it of, then it worked great and i can still use hardware buttuns to answer, and if u dont like the apperence just remove background an d remove clock, all thats left is a black screen and the slider...
This thing with enabled screen answer/ignore buttons pisses me off too... May be we can install a new dialler without screen buttons?
Really no one cares?
nikitich said:
Really no one cares?
Click to expand...
Click to collapse
i don't think it's about anyone caring. i think it's about the diamond being a new device and no one having the tricks/tips/tweaks yet. patience
I understand that. But if nobody care about an issue no one will look for the solution. I would install another dialer but i do not know how to uninstall the existing one.
jehlinger said:
This would be helpful, I have the same problem sometimes.
I'll look for a registry setting.
Click to expand...
Click to collapse
Be great if you (or anyone else?) could find a hack for this - I have the same problem when taking the phone out of the case. It would solve my (our) problem if only the hardware buttons could answer/reject an incoming call.
Regards,
Gary.
Since nobody answered this thread anymore... Did someone find out? Or did you give up?
I need this badly, stupid on screen buttons always go off
I had the same problem but after i did this I had no problem anymore.
The answer button in default phone skin(WM6) is much smaller so the risk of accidentally reject or answer the call is not so high.
Does anyone know how to stop the device returning to the Touchflo 3D home screen every time I wake the device up? I have a Touch Pro but no-one seems to know the answer to this in the forum and I guess it's a TF3D issue.
I can't find anything about this on a search, but I'm sure I remember reading about it in the Diamond forum.
It's annoying when it goes off when I'm writing a text message or in a call or listening to music and I have to navigate all the way back.
Same Problem
yes... i have the exact same problem.
To add to it, I've set autolock also. When I'm trying to watch a vedio on you tube, and if it's taking some time to buffer, the phone locks. And upon unlocking, i'll find myself in the home screen... and have to navigate back to youtube menu all again.
Very uncomfortable behaviour, especially when you are trying to show off the features on your phone to friends...
Is this solved in any new ROMs... or is there a tweak for setting this right?
I like the autolock thing - it's great. However when I'm writing a message or something it is so annoying.
Also, because the screen on the Touch Pro goes off in calls, it always goes back to the home screen so you can't see the call status, can't add notes and can't read contacts as easily. More annoyingly, my line of work involves phone systems that require entering numbers a lot so I always need to see the phone keypad. Very annoying.
did you guys every get this sorted. Just got my diamond 2 and I have the same annoying problem
Hi, I have a huge problem. Every time I make a call, preferably my voicemail, it asks me to press a number in the keypad.
Okay, that's fine. But the only problem is the screen blacks out immediately when the call is made and I cannot choose any of the options. I'm still in the call, although it will repeat the options for about a minute and just end the call.
I can't end the call manually or use the keypad. Tried pressing the lock button, the search, the menu, and Back button. Nothing seems to work.
Is there anything I can do about this? Because this is really becoming a hinderance.
Hi the proximity sensor should brighten the display up the moment you take it away from your ear, if it dosent prpbably there is a problem with it and you need to check it out with either the provider or HTC if you can.
normally to end call you click on the notification on top of the phone.
It is kinda annoying there is no physical button to end calls but i guess thats touchscreens for you
Probabily you use one case
that cover the proximty sensor
I don't use any case or screen protiction... maybe I should to replace it...Thanks..
dr.alkaiser said:
I don't use any case or screen protiction... maybe I should to replace it...Thanks..
Click to expand...
Click to collapse
if so, you should replace it ... sorry mate
dr.alkaiser said:
Hi, I have a huge problem. Every time I make a call, preferably my voicemail, it asks me to press a number in the keypad.
Okay, that's fine. But the only problem is the screen blacks out immediately when the call is made and I cannot choose any of the options. I'm still in the call, although it will repeat the options for about a minute and just end the call.
I can't end the call manually or use the keypad. Tried pressing the lock button, the search, the menu, and Back button. Nothing seems to work.
Is there anything I can do about this? Because this is really becoming a hinderance.
Click to expand...
Click to collapse
I had the same problem. Hard reset solved it. Also solved a problem I had connecting with intermittent connections to Wifi. I think a bum app may have caused the problems.
Starting to happen again, not like last time though. Now it's intermitent and seem to recover when the other end hangs up. May try to get a replacement phone this time.
From what I've seen around the internet this is an OS issue... And it happens to me intermittently as well, though my lock button brightens the display... It seems to have something to do with the screen timeout and the lock screen enabling itself...
Mine had the same issue.
I would pull it away from my face, nothing.
Laid it down flat, nothing
Occasionally it would flash.
I had to return it, no problems since.
The sensor must have been loose and slid behind the open area of the glass.
If you can still, get a replacement
My replacement is in the mail. I have found that if I shake or tap the phone it will flicker and come back during a call. I think the sensor is faulty.
Not even really sure what happened, but I was on a call, received another, and hit the answer button. When I looked at the phone again, there was just a normal call screen with something generic like "caller" on it, not the screen that shows both calls, and which one's on hold. So I had to hit the menu button in the bottom right to switch back. Anyone have this happen, or is it normal for the ONE? It may have been the first call waiting I've had, but I'm not even sure, am just so used to how the evo screen looked, I never thought anything about it.