hi there
I've imate pda2
i've been reading and reading
lately i've upgraded my rom to o2's Modified XDA_IIi_Upgrade_v1.11.162_Radio_1.04 thingy
though its nice and all i hate the O2 logo right next to the start button
also the splash screen..
how can i remove those is 1 thing
the other is
is there a newer version for my imate pda2 ???
last: what are we supposed to see when we unlock the extended rom?
i've tried some methods but its not really working..
I do see the windows directory i believe thats normal (it always existed )
when i went to registry to look for [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
I don't have that key instead i've TRUEFFS_DOC so without the 1
and it says storage in it. which my permenant saved stuff goes into..
so how can i show my extended rom thingy?
thanks :d
To get rid of the O2 crap hard reset you device and when the phone reboot's a O2 looking thingy will appear, type 0506 and then corperate button now you wont have the o2 crap.
corperate button ???
HELLO, MY P3600 (TRINITY) DOES NOT SET OFF PIU' OR BEST JAMS ON the SHIELDED one WHERE E' LOGO HTC AND DOES NOT MAKE ME There TO ENTER IN the SYSTEM.
I HAVE MADE 2000 SOFT RESET NOTHING,
REINSTALL 4 TIMES ROM AND E' ALWAYS the SAME PROBLEM
YOU HELP ME,
HELLO..
You really should learn a little more english or switch to an italian forum. And you shold STOP WRITING IN BIG LETTERS BECAUSE THIS NOT POLITE!
- when you turn the device on what do you see: No GSM?
- how far is it booting (splash screen/windows ce)
- when you start in 3 color screen what version numbers can you see?
Problem Start Htc Trinity
how far is it booting (splash screen/windows ce)
NO ENTER IN WINDOWS CE
HELP ME!!!!!!!!!!!!!!!
- when you turn the device on what do you see: No GSM?
Problem Start Htc Trinity
- when you turn the device on what do you see: No GSM?
NO GSM
NO WINDOWS CE
YES
If NO GSM you either can send it to HTC service they can reflash the radio ROM chip directly.
And next time observe caution.
The problem you describe sounds like YOU cancelled a ROM update in the middle (e.g. when it was looking stuck but in fact it wasn't you cancelled the update or you removed tha cable).
problem start htc trinity
how I make to resolve the problem?
tankyou
And i have this problem, when power on the pda i see No GSm, d v3.00 ....
From where comming my problem? i make hard rest but nothing... reflash with other room (6.0) and again nothing. But some time the pocket freezed.. and i don't know ... if i flshed the radio module will be OK. or maybe have some hardware problem, becouse haven't radio modula + freezed some time...
Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az
try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az
Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way
uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....
gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]
is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !
I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it
No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.
Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!
Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!
No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??
erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!
erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
thank anyway,i will try it before tomorrow,cause i will send them my device for repair.
hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'
got an x1 the other day, and i want to mod it, you know , with a a wm 6.5 build and some x2 panels etc, but i can't make it to work, if i try it over the pc i get error 262 and it freezes at 0%, if i do it over the sd and put a KOVSIMG.nbh it hangs at loading, i letf the phone alone for 15 min, and still didn't got past the loading...what do i do wrong, can i ever mod my xperia, as i can tell it's unlocked but it has a vodafone branding on it, i've searched the xda-forum the past day, but i couldn't find anything that i can apply to mine, help me please !
Andrei said:
got an x1 the other day, and i want to mod it, you know , with a a wm 6.5 build and some x2 panels etc, but i can't make it to work, if i try it over the pc i get error 262 and it freezes at 0%, if i do it over the sd and put a KOVSIMG.nbh it hangs at loading, i letf the phone alone for 15 min, and still didn't got past the loading...what do i do wrong, can i ever mod my xperia, as i can tell it's unlocked but it has a vodafone branding on it, i've searched the xda-forum the past day, but i couldn't find anything that i can apply to mine, help me please !
Click to expand...
Click to collapse
you need to install h-spl first before trying to flash a custom rom
cheers
Hi gays. I need some help please...
The problem is - i can not make Hard spl..
So I should tell from the beginning..
It is my second Xperia X1. With first one i had no problems at all. I v´e done
Hard SPL, changed some custom FW´ etc.. Unfortunately my first Xperia X1 was stolen..
So I bought a new one, With T-Mobile Branding..
First of all I need to make Hard SPL, I donno why, but PC method do not work for me it stucks with 0%, so i decided tio make Hard SPL with SD Method.
I have 2Gb Sd formatted in FAT32
I have downloaded 3 SPL:
Original 72.000
72.Olinex
78.Olinex...
So if I copy 78.Olinex to sd card and rename it to Kovsimg.nbh and start phone with pressed Volume key and power button it goes in Tri-color Boot Mode and hangs with Loading...
IT IS WITH ALL SPL´S AND CUSTOM ROMS
I tought it is because Branding, so i have downloaded Generic Rom, and flashed it with SD..
THERE IS NO CHANNGES, STILL NO CHANCE TO FLASH OLINEX SPL, HANGS ON LOADING....
Please help me...