Problem Start Htc P3600 (trinity) - P3600 Software Upgrading

HELLO, MY P3600 (TRINITY) DOES NOT SET OFF PIU' OR BEST JAMS ON the SHIELDED one WHERE E' LOGO HTC AND DOES NOT MAKE ME There TO ENTER IN the SYSTEM.
I HAVE MADE 2000 SOFT RESET NOTHING,
REINSTALL 4 TIMES ROM AND E' ALWAYS the SAME PROBLEM
YOU HELP ME,
HELLO..

You really should learn a little more english or switch to an italian forum. And you shold STOP WRITING IN BIG LETTERS BECAUSE THIS NOT POLITE!

- when you turn the device on what do you see: No GSM?
- how far is it booting (splash screen/windows ce)
- when you start in 3 color screen what version numbers can you see?

Problem Start Htc Trinity
how far is it booting (splash screen/windows ce)
NO ENTER IN WINDOWS CE
HELP ME!!!!!!!!!!!!!!!

- when you turn the device on what do you see: No GSM?

Problem Start Htc Trinity
- when you turn the device on what do you see: No GSM?
NO GSM
NO WINDOWS CE
YES

If NO GSM you either can send it to HTC service they can reflash the radio ROM chip directly.
And next time observe caution.
The problem you describe sounds like YOU cancelled a ROM update in the middle (e.g. when it was looking stuck but in fact it wasn't you cancelled the update or you removed tha cable).

problem start htc trinity
how I make to resolve the problem?
tankyou

And i have this problem, when power on the pda i see No GSm, d v3.00 ....
From where comming my problem? i make hard rest but nothing... reflash with other room (6.0) and again nothing. But some time the pocket freezed.. and i don't know ... if i flshed the radio module will be OK. or maybe have some hardware problem, becouse haven't radio modula + freezed some time...

Related

help on the firmware pls! + extended rom

hi there
I've imate pda2
i've been reading and reading
lately i've upgraded my rom to o2's Modified XDA_IIi_Upgrade_v1.11.162_Radio_1.04 thingy
though its nice and all i hate the O2 logo right next to the start button
also the splash screen..
how can i remove those is 1 thing
the other is
is there a newer version for my imate pda2 ???
last: what are we supposed to see when we unlock the extended rom?
i've tried some methods but its not really working..
I do see the windows directory i believe thats normal (it always existed )
when i went to registry to look for [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
I don't have that key instead i've TRUEFFS_DOC so without the 1
and it says storage in it. which my permenant saved stuff goes into..
so how can i show my extended rom thingy?
thanks :d
To get rid of the O2 crap hard reset you device and when the phone reboot's a O2 looking thingy will appear, type 0506 and then corperate button now you wont have the o2 crap.
corperate button ???

please help me!!!!!

this is my first post...i try to change a rom from wm 5 era na wm6 pl.firstly ,i unlocked my mda compact 2 program which is called" lokiwiz03a" and it was ok...aftar tha i find a polish rom in
http://rapidshare.com/files/41548391/WM6_PL.rar
pass: mobilepc
and a try to change my rom - "awizard-v1_3beta2_475"and now is almost dead my mda....after few minuts sth happened w connection- my pc was turn off...and mda was stuck....a reset both..now i have only splash screen
ipl 2.06
spl 2.06.0000
gsm 02.19.21
os 4.0.0.0 ?????and this is one of the problem ...
next i dont have any connection with pc..i don't no what to do.....;-((((((i know that is same program shell tool...but i don't know where to find i and how to use.......any roms which i have don't work because i don't have any connection with my pc(error connection problem)...how to have my win5 or another win 6 back.....i have bootloader...but i don't no how to use....i don't have any connection with pc..some aplication of rom didn't work on vista 64 bit ((((please help me!!!!!!!!
hi
try this
http://forum.xda-developers.com/showthread.php?t=320390
second post have same problem as you today and i fix it on this way
jerry

SERIAL / V 2.07 In Qtek 9090 Mistake

Hello I have a blueangel Ph20b2 aka Qtek9090 try an upgrade of the rom and ruling .. I was just turning on the device with serial and V2.07 I can do .. I have read by the network that has been left without the Romany and non interacts between soft and hard .. There is some system to revive .. Some software anything .. Since connect the PDA at the base i usb of the laptop does not recognize no nothing.
Eeeeehmmmm, yes, nice. But we do not understand a word. Was it google-translated or something?
If you did something wron during upgrade, just do the upgrade again. Follow the procedure step after step, do not omit even one step - try to understand what are you doing and what for.
Without more understandable information (about what were you doing and what is happening) we cannot help you.
Stupid mistake - Serial 2.07
Reading between the lines of the original post I suspect the author has done the same as me - or at least ended up with the same result. Anybody know of a fix.
Cause; I attempted to restore from backup over wifi (yes wifi - I was desperate & didnt have the cradle available).
Result; my XDA 2s went blank and now displays a screen displaying "Serial V2.07" (or "USB V2.07" when in the cradle). No amount of re-attempting to re-connect to the device works. I'v tried soft / hard resets / battery removal etc. I'm using Microsoft ActiveSync V4.5. The XDA is an O2 badged variant.
I suspect I'm looking for a boot strap load program that will repair the xda rom such that i can subsequently reload its operating system. Any positive suggestions gratefully received.
just found reference to putting xda2s into bootloader mode "soft reset button,power button and center of D-pad button together" - this still leaves the screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?
Fixed
problem solved - I went back to the 2nd posters answer and attmpted from the begining to install Xda_IIs_Upgrade_v140242.exe, ignoring what was on the xda screen & it worked.
I now have a functioning xda - but I still have with the problem I was trying to solve in the first place.
After a the xbackup restore, the xda desktop isnt re-written cleanly, it overlays semi-transparently on top of the last program run. The desktop accepts stylus commands to run programs which open and display cleanly. How can I clean this up - I dont want to loose O/S DBs e.g. my messages etc. - I dont see a way I can port them across upgrades so I can not just stick with the Xda_IIs_Upgrade_v140242.exe
I feel if they have not understood anything written .. I do not understand Spanish and in English .. I have the problem of serial V.2.07 screen .. Where can I download a rom for qtek9090. In my pda you do a hard reset buttons with record power + + reset and still continues to do nothing with serial on the screen .. If there is any mistake in what they write what I am using the translator google
i got the same problem ...screen saying "Serial v2.07" - Am I already in bootloader mode? - if it is what do I do next?
hate to throw my phone in the garbage can
please someone help meee
anybody found any news?
still in bootloader mode, error 112 at stage 3. BA turns off when trying to update.
2much 4me
anybody come back from this point to wm3?

Restore Original Windows and SPL

Hi,
I have a HTC Trinity from the German Vodafone called there VPA Compact GPS.
After I installed Lalles new Manilla 2d rom... my phone allways stucks after a couple hours of using and when i restart it i have to configure windows again, sometimes it stucks in bootloader and i only see the red vodafone screen so i have to do a hard reset.
I also loose always conection and noone cann call me , always the mailbox conencts i can call always.
I would like to put the 0riginal WIndows back on my Phone and the orginal boot loader etc.. (all the things u see if you enter bootlaoder menu should be original) so that i can give it to vodafone to repair it,
does someone know how i can do it ? i allready installed sspl , so it shows me now SPL_1.07.ds instead of Olipro..., but there still stands IPL-SSPL by Des
is thsi original and does someone know were i get the original ROM ?
best regard,
alechsej

Diamond warranty, Flash Problem!

Hi Guys,
I have a great Problem with my XDA Diamond! Since one month my touchsreen didnt response! At the moment runs olinex 1.40 at the pda. I have flashed the newest o2 rom and that work without a problem! But i cant start my device because the first adjust doesent work.... (touchscreen dosent work). I tryed Hard-SPL Unlocker post 39 that i can send my device back to the O2...
but at the process on the screen of my pc i have 0% for a time than came Error 202: connection....
activesync is ok!
I have tryed to update the olinex but the same problem ...
also with other roms...
I hope anyone of you have a idea because i wanna have my pda back ....
sorry for my bad english!
Thanks a lot!!!
L3xX
If Your touchscreen doesnt response, i think it would be a external problem. Did you drop it?Water spill...Maybe try flashing a new rom like Energy Rom 6.5 with maila 2.5(sense 2.5 UI) I just got my CDMA Diamond this Saturday. Great phone with the Windows Phone 6.5 Rom. Sorry but i tried to help but couldn't. If u have a warranty try to e-mail or contact HTC, maybe they might send you back A HTC HD2! Oh the link for Energy Rom is at PPC GEEKS - http://forum.ppcgeeks.com/showthread.php?t=74084
I had the same problem
There are two different ways I fixed mine
1) Press and hold the power button + volume down + enter button (menu) while holding press the rest with the stylist. continuing to hold the buttons until a white screen comes up allowing you to hard rest the device.
2) If 1) doesn't work try try unlocking your phone again then putting a new rom on it. (this will work as long as your phone will connect to the computer, with two beeps)
well I hope this helps
Hi great thank to you! but this steps i´ve allready done!.
Bevor i can give my device into de warranty i musst flash the normal bootloader!!! in my eyes this Hard-SPL Unlocker
But this dosent work!

Categories

Resources