I have been having this issue for a while, with every rom I had, now im using udk's 3 Rom (Which is awsome) but the forwarding option still doesnt work, so I wanted to see if someone has a solution:
I dont want my calls to be forwarded to my voicemail at all ( I dont have a voicemail)
when I try to uncheck the marks under the: no answer, unavalible, and busy. when I hit OK they go back to original state with the voicemail in them. I also tried putting all 00000000 under the number but when I hit ok a massage pop out saying: Cannot save your changes to the network. try changing setting later, or disconnect data connection and try again. (tried it, doesnt do anything).
can someone help,
Thank you
does your operator support this? and did it work in other phones?
yep, check with your operator...
maybe try this:
enter ##004# and press send button
this should cancel all conditional call forwardings
or maybe it was ##002# and press send button
this should cancel all call forwards
good luck
I tried both of those options, it said succeeded but when I call the phone it still goes to the voicemail.
how do I know if the oparator supports it ?
I have ATT at the USA ?
Thanks
g-fall said:
yep, check with your operator...
maybe try this:
enter ##004# and press send button
this should cancel all conditional call forwardings
or maybe it was ##002# and press send button
this should cancel all call forwards
good luck
Click to expand...
Click to collapse
Related
I got everything working the way I want on my new Tilt. I already created a thread about email not working and I have already been helped on that one (thanks again).
Since then, I decided to use a new rom (Schaps WM6Pro Kaiser 4.21 WWE Full). I am really liking it.
First thing I noticed is that AT&T's Media NET connection was no more, it showed up as CingularGPRS. Although all the settings were right and I think I have everything setup right (data works great, SMS/MMS, incoming/outgoing email, incoming/outgoing phone calls).
But the voicemail isn't working. Phone rings about 12 times, and instead of going to vmail, the caller gets a "The cellular customer you are trying to reach is unavailable, please try your call again" message.
If I press ignore on the phone, the caller gets a busy tone.
I tried searching (really, I did) and didn't find anything.
Any ideas on how to set up voicemail?
Thanks in advance for any help.
My VM got messed up after AT&T renewed my contract and updated my account. Call customer support, I called them last night.
Voicemail is a carrier issue unless you have the wrong number set to dial your voicemail??
Farsquidge said:
Voicemail is a carrier issue unless you have the wrong number set to dial your voicemail??
Click to expand...
Click to collapse
I would have no idea what number its supposed to dial.
But thanks for the help, I will give AT&T support a call and have them fix it.
BTW, is this something I did by messing with the phone, or was it probably not set up from the get go? i picked up the phone a few days ago and never received a voicemail and only found out today because a friend called and got that weird message so he texted me instead. Just dont want them accusing me of any
I have the same problem when ignore (red button) a incomming call.
It works good when I don't pick up, then it goes to voicemail after 30 seconds, but when I push the red button it give a busy tone...
Does someone know a sollution for this?
I have the right number in the voicemailbox settings...
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Anybody have this issue?
Can somebody confirm that the reject calls text message generate function works on the Diamond......Mine does not and I'm wondering is there a Registry switch. Thanks.
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
rhedgehog said:
just trying it now, but seems just to send it to the voicemail instead. Maybe we need to turn voicemail divert off first?
would try that, but for some reason, t-mobile doesn't seem to want to let me turn my diverts off!!
Anyone on another network care to try??
Click to expand...
Click to collapse
How do you turn diverts off??...cant seem to find anywhere in the phone that gives you that option ie options like when busy divert calls, when out of range divert calls etc etc
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
rhedgehog said:
start>settings>phone>services tab
highlight call forwarding and then tap the get settings button.
Voila, Call divert options
Click to expand...
Click to collapse
Thanks for that...would have never guessed it would be in there lol
Btw your right, i tried to disable the voicemail feature...and it didnt work...if i press the ignore button it diverts to the voicemail...hmmm strange...
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
rhedgehog said:
i think we need someone not on t-mobile to try it. t-mo UK is a PITA when it comes to changing stuff like voicemail settings.
Don't still have my O2 sim so couldn't try that, and am working from home for a bit today so i'm kinda stuck.
Might ask one of the guys at work to try one of our other diamonds with an orange SIM and see if that does the trick....
Click to expand...
Click to collapse
Its strange because on my nokia n95 8gb phone i could easily turn my voicemail on and off whenever i chose.
I did notice after i had unticked the voicemail boxes...pressed ok then exited...went back into the phone settings and saw that the boxes were ticked....as i said its strange. Because sometimes i just want the caller to hear a busy tone or the reject tone...
Hopefully someone can try with a different sim and see what happens.
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
rhedgehog said:
it could just be that T-Mobile don't like the commands coming from the windows mobile devices then. I've only been with t-mobile since i had WM devices - about 4 years now - and i never really bothered using my other devices on the network. I think i have an old Sony Z5 around somewhere, i might charge it up and turn the voicemail off with that and then see if that helps.
Click to expand...
Click to collapse
Could be.,..i dont know as the Diamond is my first WM device that ive been impressed with enough to keep it.
Might give tmobile a call later and see what they have to say about it. Although i dont think im going to have much luck as when i rung them uip about mms settings they said they dont support Diamond..so couldnt help me out there.
that sounds about right for T-mo customer services.
If you can get past the usual shower of muppets on first level and get through to the guys in advanced connectivity in Doxford or Greenock, they should either be able to help or refer you to someone who can....
If i have to call them now, i refuse to speak to the lower levels and ask straight for advanced connectivity. Last time i got through (back in the days when i had my magician), was cos they'd changed their MMS settings. Finally got through to AC and they had me sorted in under 2 minutes! it's just the call filterers on levels 1 and sometimes 2 that cause the problems usually.
pilib said:
In the phone options under the advanced Tab there is the option to reject calls and generate an automatic text message; has anybodt got this to work? It simply does nothing for me. Thanks.
Click to expand...
Click to collapse
I have flashed the German 1.93 update to my Touch Diamond without problems and the phone is working well -- however, I don´t have the "advanced" tab in the phone option!! (and before anyone asks, no I also don´t have the German "Erweitert" Tab there).
Anyone know what´s going on here?
I´d like to turn off the short vibration the phone makes when a call is established.
Thanks // Tom
I have a sprint touch pro, and i want to kno how to connect an incoming call to the other line. Im alerayd in one call, somone else calls me i pick it up, but then i want to connect the 2 lines. get it? does anyone kno how to do this? Ive alreayd searched the forums, and i already know how to make a conference call the by ME callin both, but thats a hassle sometimes
as with any GSM and later mobile phone you answer your second call (this will auto put the first call on hold)then dial the number 3 and then press the call button again, this will conference (3 way) the calls.
When you answer the second call, the first one becomes on hold, just go to the menu and hit "Conference"
Metallic-Force said:
When you answer the second call, the first one becomes on hold, just go to the menu and hit "Conference"
Click to expand...
Click to collapse
I dont think sprint have a conference button...
Go walk in to a sprint store and ask them, if they're anything like AT&T, they don't know **** about what they're selling and will have you call HTC. now really?
hello everyone,is there anything that you can do to make your phone ring longer like 45 seconds or a minute? thx
i guess no one knows how to do this because i have no responses as of now
You mean ring longer at what?
i think he means he wants the phone to ring longer when a call comes in. instead of cutting off the cycle at ~30sec it would be ~1min. am i right TopDogg1?
yes,that is what i want. thx for any help i recieve
TopDogg1 said:
yes,that is what i want. thx for any help i recieve
Click to expand...
Click to collapse
Sure, here's what I do, the instructions might be different based on your carrier.
Hit the green button, dial 611. When customer service answers, ask them to increase your ring time.
last pow off?ohf....
Hi, I had a similar problem and it was the setting for when a call was forwarded to voicemail. It turned out to be easily changed
On tmobile in the UK you can go into Settings and then Phone and choose the Services tab.
On here you can choose when the call is forwarded to voicemail and other conditions. The Kaiser reads the Network settings then you can change them and it will update the network for you.
Cheers
John
how do you do that under network i didnt fine anything pertaining to that
Today I tried to call a customer service number for a business on my Captivate - you know the ones, press 1 for English
Anyway, once I made the call, I figured out how to and pulled up the dial pad within the call and hit the number for my selection... Nothing happened. I tried this multiple times and the computer on the other end acted like I didnt do anything. I tried calling my cell providers customer service knowing they had a similar system, and they too couldnt recognize my key strokes to enter my mobile number.
Has anyone else had this problem? Its like the phone isnt broadcasting the tones over the line while dialing or something. Am I doing it wrong, or is this just a problem my phone has? Very odd...
~T.J.
Mine works fine. I use it everyday to check my work voicemail.
I don't have any issues dialing within a call either.
Sent from my SAMSUNG-SGH-I897 using XDA App
Havent had that issue yet on my phone.
works fine here
Works fine for me.
02CWRX said:
Today I tried to call a customer service number for a business on my Captivate - you know the ones, press 1 for English
Anyway, once I made the call, I figured out how to and pulled up the dial pad within the call and hit the number for my selection... Nothing happened. I tried this multiple times and the computer on the other end acted like I didnt do anything. I tried calling my cell providers customer service knowing they had a similar system, and they too couldnt recognize my key strokes to enter my mobile number.
Has anyone else had this problem? Its like the phone isnt broadcasting the tones over the line while dialing or something. Am I doing it wrong, or is this just a problem my phone has? Very odd...
~T.J.
Click to expand...
Click to collapse
You're not going home and re-entering the dialer program are you?
The best way is to go to speaker phone so you can hear it then hit dial pad from the call screen.
If you go to the home screen you are still in the call but hitting the phone icon will let you find or edit contacts, but will not broadcast unless you hit the call button but I don't think it will broadcast to the active phone call, it would likely try to start a 3-way.
from the home screen you must return to the call from the status bar.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
The problem seems to have fixed itself, as it worked the next day to dial an extension to get a hold of my girlfriend at work. Very odd. My procedure was to dial the number, then while in the call look at the screen and hit the button for "dial pad' which of course brings it up. Then, enter the numbers I needed to enter.
~T.J.
I have had this before on another phone
It was likely because of a bad signal. It was just strong enough to reveive the signal but not strong enough to have your phone communicate to the tower. Thus on the other side of the line they never got the tones even though they were being dialed. Considering it did not happen again it appears this is the most likely cause.