Database Develop

Tilt - Autocomplete Has Stopped Working

Greetings,
I recently updated the stock AT&T ROM, and am a user of KaiserTweak.
Following my update to the new stock Tilt ROM, I no longer get autocomplete either when typing out a message OR (and this is the annoying part) when I want to send an email. Previously, I could enter the first letter and all of the entried beginning with that letter would come up.
Can any kind soul please let me know how I might be able to restore this? My current KaiserTweak autosuggest is set at 6. Of course, I am getting 0.
Thanks!

I recently had this problem with mine using Kaiser Tweak... Turn off XT9 in Kaiser Tweak if you have it enabled and then soft reset and it should work fine. This is what i did and my auto complete came back on no problems. If that doesnt work then I have no idea what it could be. Im still a noob.

SOLVED
That was it. XT9 is a 'advised' setting too ... YIKES.

well i didnt update the new att rom, nor do i use kaiser tweak. i just have stock everything & mysteriously my auto complete stopped working. well its not that it doesnt work, but there is a 15 second lag or something on it. and when it does work it pisses me off bcuz i'll click on the item i wanted to auto complete & it doesnt go away (bcuz the lag) so i'll click it & start typing the next word & it keeps adding the auto complete entry!
i've tried soft reseting, tried, cutting the phone off, and i've noticed i've just got a huge lag on the whole phone w/in the last hour or hour & a half. i cut the phone off & removed my sim & then started it back up & there is no lag whatsoever. could it be something that ATT is doing on their networks or something? pissing me off bad tho...bcuz i've been finding little POS problems day after day w/ this phone and when you spend that damn much money on one, you figure that you wont have to worry about all these little problems...and they add up to amount to one pissed off customer. hell if att had something else w/ wm6 & office & wifi, i'd be using it now instead of feeling like im getting shafted by purchasing this POS.

I understand that your phone is behaving in a way that you do not like. It is either:
1. a bad phone - take it back
2. it is behaving correctly and you do not understand it - in that case indicate here AFTER SEARCHING what your problems are and I am pretty sure that you can get them solved.
3. you have hosed something up - again AFTER SEARCHING ask and you shall receive.
As a newbie myself I have found this a wonderful wealth of knowledge. HOWEVER - if you do not TRY and helpyourself - put on your asbestos suit.
Now - it is entirely possible that you have purchaseda high maintenance phone that has lots of power that you do not need and should not have because it will take more than you want to invest in it.
Your decision.
(BUT - I would quit griping here because you will get VERY LITTLE sympathy.)
Bill
stanGib said:
well i didnt update the new att rom, nor do i use kaiser tweak. i just have stock everything & mysteriously my auto complete stopped working. well its not that it doesnt work, but there is a 15 second lag or something on it. and when it does work it pisses me off bcuz i'll click on the item i wanted to auto complete & it doesnt go away (bcuz the lag) so i'll click it & start typing the next word & it keeps adding the auto complete entry!
i've tried soft reseting, tried, cutting the phone off, and i've noticed i've just got a huge lag on the whole phone w/in the last hour or hour & a half. i cut the phone off & removed my sim & then started it back up & there is no lag whatsoever. could it be something that ATT is doing on their networks or something? pissing me off bad tho...bcuz i've been finding little POS problems day after day w/ this phone and when you spend that damn much money on one, you figure that you wont have to worry about all these little problems...and they add up to amount to one pissed off customer. hell if att had something else w/ wm6 & office & wifi, i'd be using it now instead of feeling like im getting shafted by purchasing this POS.
Click to expand...
Click to collapse

whk said:
I understand that your phone is behaving in a way that you do not like. It is either:
1. a bad phone - take it back
2. it is behaving correctly and you do not understand it - in that case indicate here AFTER SEARCHING what your problems are and I am pretty sure that you can get them solved.
3. you have hosed something up - again AFTER SEARCHING ask and you shall receive.
As a newbie myself I have found this a wonderful wealth of knowledge. HOWEVER - if you do not TRY and helpyourself - put on your asbestos suit.
Now - it is entirely possible that you have purchaseda high maintenance phone that has lots of power that you do not need and should not have because it will take more than you want to invest in it.
Your decision.
(BUT - I would quit griping here because you will get VERY LITTLE sympathy.)
Bill
Click to expand...
Click to collapse
yeah i wasnt really looking for sympathy...but thanks for the tip, i'll digress prior to the rant next time. its just getting more & more frustrating. the purpose of my post was to in fact garner some sort of assistance in regards to the auto complete not working on the phone.
the other issues i've had w/ the phone are issues that are seemingly unable to be fixed. ie. the camera lag issues, the utilization of the phone as a 56k modem, or other things like that. i wouldnt say the phone is too much work for me as i dont mind putting forth the effort but it just makes me wonder how a phone can be sold so haphazardly without many of these issues resolved prior to it being released. /end rant
edit: i just wanted to shed more light in regards to the situation that i've found out. this is the only way i can replicate the issue.
i turn the phone on. go into messaging, its defaulted back to keyboard input, i change it to block recognizer. begin to input letters. no auto complete. after about 3 words, auto complete pops up. i click one of the options. it doesnt go away. i wait for the auto complete applet to leave. it does, i begin to type & at this point the lag has commenced. auto complete will not show up again unless i stop adding letters to the sms. when i do so, about 8-10 seconds later the auto complete pops up. i finishe the sms & send or cancel it. now everything is laggy. i cant access apps, if i lock the phone i cant unlock it. everything is frozen w/ an absurd delay, as in i've waited over 5 minutes & the unlock will not remove itself. the only thing that i can do is turn the screen off by clicking the power button. when i resume i get the top today bar and the bottom unlock bar, everything in the middle is blanked out. the only way i have been able to continue passed this point is to pop the sim door forcing it to cut the phone off, then replace the sim door lock. if i dont use the auto complete function on the phone i dont have any issues whatsoever. hopefully the added info helps. thanks.

After reading this I checked and autocomplete was not working! I recently updated Kaiser tweak and remember putting 6 words in. When I checked, it was set to 0 words. I changed it back to 6 words and is working fine again. Not sure how it got set to 0.

Kaiser going crazy (looks haunted...) AGAIN - Update2: Not Solved?

Ever since returning from repairs, my Kaiser is giving me more problems than before.
First, I apparently lost the ability to hard reset my phone using the 2 softkeys & soft reset button method.
For more: http://forum.xda-developers.com/showthread.php?t=384581
First thing I did when I got my phone back, was flashing the latest ROM from Dutty (Dutty's Official WM6.1 5.2.19209 Release). After performing numerous installations and soft resets, my device went crazy after yet another installation and soft reset.
Just before my Kaiser takes me to the Today screen after (re)booting, the phonepad pops up and seems to be 'pushing numbers out of itself'. Confused by the explanation? Just take a quick look at the short vid I made.
http://www.youtube.com/watch?v=YGkot2-mbbI
(Fast forward to 01:00 to see it going crazy. Long after the vid ends this continues)
Anyone got a clue as to why this is happening? Or has my incompetence reached new heights and is that to blame for my problems?
Thanks in advance
P.S.: In the meantime I have hard resetted my device, but I'm still curious...

call at&t and get a replacement. Easiest thing to do.

Try load the factory default ROM.

FAx
The kaiser has been known to act haunted, thats why it comes in black.
Fix: When applying this fix avoid looking at the screen to avoid the image inside the device that you want to exorcise. Unplug fully and remove battery to prevent an escape through the wires; also ensure that you disconnect any usb devices to avoid an escape to your computer.
Once you have isolated the device. Find the packaging and insert carefully, ensuring that it is packed safely to avoid any breakage resulting in an escape to your home. Then ship to the place you purchased it from and ask them to send you back one that is not possessed.
Good luck.

alexn2 said:
The kaiser has been known to act haunted, thats why it comes in black.
Fix: When applying this fix avoid looking at the screen to avoid the image inside the device that you want to exorcise. Unplug fully and remove battery to prevent an escape through the wires; also ensure that you disconnect any usb devices to avoid an escape to your computer.
Once you have isolated the device. Find the packaging and insert carefully, ensuring that it is packed safely to avoid any breakage resulting in an escape to your home. Then ship to the place you purchased it from and ask them to send you back one that is not possessed.
Good luck.
Click to expand...
Click to collapse
Very dramatic - you don't work in Hollywood do you?

gqstatus0685 said:
call at&t and get a replacement. Easiest thing to do.
Click to expand...
Click to collapse
He's in Belgium

ach2 said:
Very dramatic - you don't work in Hollywood do you?
Click to expand...
Click to collapse
Is that a hint for a career change...... the loss of one's tilt is quite a dramatic event.

@alexn2
I already called in help from the Vatican, but it will take some days before the first batch of exorcists arrives (haunted was a sarcastic expression). Any explanation in the meantime?
@gqstatus0685
This device is a replacement which I got back last week. But it seems to me that I will need to send it back again. Another week without my Kaiser...

alexn2 said:
Is that a hint for a career change...... the loss of one's tilt is quite a dramatic event.
Click to expand...
Click to collapse
care to sign up for ma 4th installement of the exorcist?

Damn this is scary. Call the Ghost Busters!!

WTF?
I just don't get it...
I now have my 3rd Kaiser, since I had issues with the first two. One of the problems my second phone had was the 'haunted' problem as described above.
My Kaiser has been working like a charm for several weeks. I first used the stock ROM, then switched to Dutty's ROMs. I used 3 ROMs: Apr16, Apr29 and Jun07 release.
I installed the Jun07 release today. After installing and configuring the same software I had before upgrading the ROM, guess what?
HAUNTED AGAIN... WTF?
I loaded the ROM, did multiple hard-resets, soft-resetted after customization, loaded CABs, configured them, rebooted several times and when I had finally configured every app => TOTAL Clusterf*ck... (again)
Sometimes it does boot normally BUT when I press the 'Send'-button and the dialer opens => Kaiser goes LOCO again...
Anyone got any idea as to why this happens?
NOTE: I have the latest SPL + Radio NEON 1.58.25.17 (included in the ROM)

I did some additional testing. I had SPB Pocket Plus installed an had the Safe Boot option enabled. So I did some testing in safe mode.
The phone boots 'normally' to safe mode. No apps or services are loaded, and I can open the dialer and even enter numbers to dial. But when I try to delete a number using the backspace in the dialer => again haunted

I just discovered the problem. I always try to install most of my apps to my Storage Card.
Some of those apps is the Microsoft RDP (remote desktop) client.
Installing it to the Storage Card caused the phone to go crazy. It has to be installed to the Main Memory.
NOTE: After discovering the problem, I did find other posts across the forum reporting problems if the app isn't installed to the main memory. Since I found the cab on someone's 4Shared account, I wasn't aware of the installation requirements.
Thanks anyway for the support given

As posted before, I very recently flashed Dutty's Diamond V1 Build 19588 ROM (Jun07).
Today I tried playing WMV files with Windows Media Player for some performance testing. I loaded my first file and whenever I tried something, like fast-forward, switch to fullscreen mode,... my phone crashed and soft-resetted itself.
Guess what I got when the phone booted => The crazy dialer (haunted edition)... It kept doing this after every soft-reset until I removed the MicroSD card. The video I was trying to play was located on the Storage Card, so there might be a relation.
While I have done additional testing under the same circumstances, I haven't been able to simulate the problem.
I'm still clueless, so as always are ideas welcome...

Touchscreen unresponsiveness - BRICK?

Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps and/or buttons, read on.
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related to latest 6.1 builds... or so it seemed at the time.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
First I thought it's TouchFLO, then I thought that it's the latest 6.1 ROMs.. then I thought it's related to 3.56 HardSPL.. well eliminating those factors one by one DID NOT fix the problem. Right now I went 100% to stock ROM (one it came with) and AT&T's original SPL. I started having sound problems (w/e radio I tried did not work) so I flashed Hyperdragon Wm6.1 ROM.
About 90% of the problem is phone ignoring ANY kind of touchscreen taps/drags.
About 10% of the time its the hardware buttons that have the problem - for example I push "call" (or any other softkey) button, and nothing happens, while touchscreen could be working fine at that time. In about 10 seconds, hardware buttons would start working again.
Some information that was gathered from this thread and personal research:
It looks like problem is NOT related to the following:
- POWER. Connecting phone to AC power does not solve the problem. Subjectively, it may improve it a little.
- BLUETOOTH/WIFI. Problem persists with EVERYTHING disabled and phone being in Airplane mode.
- PARTICULAR 6.1 ROM. I had this problem on ANY 6.1 ROM I tested (and I tested all the way from AT&T almost-official WM6.1).. maybe that's why they didn't release it?
- OPERA browser. Some people never had Opera and they still have this problem (please confirm this!).
- SPB/WISBAR interface software. Although having Wisbar stuff does make it a lot worse for me.. and I still have the problem without SPB or WISBAR installed.
- S2U2 screen lock. Still had the problem w/o S2U2 installed.
- iGo 2006 or iGo 8. Many users with this problem never used iGo.
Problem MAY be related to the following (needs more research, please help):
- Original SPL versus HARDSPL 3.XX
- WM6.0 versus WM6.1 (I don't think I had any problems running original AT&T 6.0 ROM, but I did have sound (radio) problems, so had to flash 6.1). Several users report that WM6.0 is immune to this problem.
- A combination of running WM6.1 with latest HardSPL?
- Custom ROM VS Original ROM. Perhaps problem is in the tweaks to the registry.
- Simple things like overtime connection weakening in touchscreen connection to the mainboard. Whoever can open a Kaiser could try to replug/clean it and report back to us.
- Radio version. Should be easy to test, just need to reflash all kinds of older radios and see if problem persists.
Please make sure that you test your phone with some touchscreen intensive games/software a lot for AT LEAST 3-4 days. I had it happen several times where it would be fine after reflash for about a day or so, and then it would come back in full force.
BRICK?
In my case, running HTC WM6.0 ROM with HTC SPL DID NOT fix the problem, I can even say it made it worse. Touchscreen would respond to about 10% of the screen taps. Tap pressure doesn't make any difference.
Also, running AT&T stock shipped ROM with stock shipped radio and SPL did not fix it. I guess at this point, nothing will. Waiting for replacement tilt.
Hope nobody else will get it as bad as I did. All I can say is... make those relfashes count.

Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?

DarkDvr said:
Okay, so to those of us who have problems with screen ignoring/being very slow with screen taps - I think I've found a fix. Here's a little background:
I flashed ROMeOS ROM and started having problems where I would tap on something, and it would ignore it. I would keep tapping and tapping, but nothing happened. Sometimes, even hardware buttons were ignored, about 40% of the clicks. I never had that problem with Dutty's Diamond ROM or WM6 ROMs. Issue seems to be related only to latest 6.1 builds.
After pulling out half of my hair, reflashing all kinds of ROMs, reflashing to latest HardSPL, etc etc... I almost threw my kaiser at the wall.
So if you have similar problems - try using Shnaps' Advanced Config to disable the TouchFLO altogether.
Another thing that I've used is PocketMechanic to clean up the notification queue. After fresh install of HypreDragon (latest as of Aug 5), I had 46 duplicate notifications. Removing those seemed to ease the problem, but NOT fix it. Disabling TouchFLO seemed to finally fix it.
I hope this helps somebody. I'll update this thread if I keep having this problem..
Click to expand...
Click to collapse
Thanks for the head's up! I'll definately try that tomorrow (danish time).

Foxhunter123 said:
Hmm isn't Touch Flo one of the cool things with the Kaiser??? How do you navigate in programs now it's disabeled?
Click to expand...
Click to collapse
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".

spip72 said:
Thanks for the head's up! I'll definately try that tomorrow (danish time).
Click to expand...
Click to collapse
Do you have the same problem?

Hello,
First off thak you for the post. Ive got two identical Tilts both with the exact same radio/boot/roms. One has this issue and the other doesnt. I will be disabling it on the one havong the issue and report back! Thanks much!!!

I was also having this problem. my biggest complaint was my keyboard was all over the place. Sometimes it wouldnt see key strokes at all, other times one key hit would register as 3 or 4.
Sent a few test messages and This seems to have helped.
THANK YOU!!!
My Kaiser was getting close to being flashed back to a WM6 rom or quite possibly embedded in a wall.

where do you find cab for touchflo? I was looking for that but could not find it.

tamkhanh said:
where do you find cab for touchflo? I was looking for that but could not find it.
Click to expand...
Click to collapse
seek and you shall find.
It's all over the place.

Try playing around with the TouchFLO sensitivity options in KaiserTweak
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect

Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.

I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
and keyboard too I've noticed.. I mostly notice it with the hard keys rather than the keyboard, but I don't use the keyboard a lot.
I'll try looking for duplicate notifications, what else will do that besides MemMaid? I might reinstall it, it was handy. I previously found phoneAlarm would grow notifications over time, I suppose I need to watch for that anyway.

khaytsus said:
I've noticed this too, but I've found a slightly longer tap seems to make things reliable for me.. Instead of a quick 'jab' if I sort of touch it, it seems to be better.
Click to expand...
Click to collapse
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I'll try looking for duplicate notifications, what else will do that besides MemMaid?
Click to expand...
Click to collapse
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.

Just had another "seizure" - touchscreen would not respond AT ALL for several minutes. No matter what or how I tap - complete ignore.
After couple of minutes it started working again.
Interesting that S2U2 worked fine. Seems that windows just chooses to ignore touchscreen input.

I'm forced to return to WM6.0 ROM...
Please, anybody look into this.. phone is becoming to be unusable - I can't even enter a phone number.

DarkDvr said:
Do you have the same problem?
Click to expand...
Click to collapse
Yeah it's really bad here. I've tried all sorts of tricks, including:
Re-install 6.1
Re-install 6.1 with the recent radio update found on the e-club
Install SPL 3.56
Disable HTC today screen
Kaisertweaks - tweaks on and off
Disable radio completely (seems to help, but makes the device useless)
Disable activesync
Disable quickgps
For now, I've done 2 things that seems to help:
- Disable the HTC task manager - improves the responsiveness
- Kill the MSTLI.EXE process - improves on the number of freezes
But I still experience freezes, and it's really getting to me. I need a responsive device, not this c****

ASCIIker said:
i upgraded to official 6.1 about two weeks ago...
i recently started having the "missed taps" problem...
i have a feeling that KaiserTweak has something to do with the issue...if memory serves, i don't remember experiencing the issue BEFORE i played with the "TouchFLO->Sensitivity" and "TouchFLO->Finger Pressure" options...i just launched KaiserTweak right now and its showing those values as set to defaults where as i could've sworn i changed them to the advised settings a day or two ago approximately when i started experiencing the issue...just a point to clarify, i was only playing around for no particular reason and my taps were not problematic before
i've just changed them to the advised settings and did a soft reset to see if these are the kind of settings that are forgotten after a soft reset...but they stuck...so i'm gonna observe this for a couple of days with the advised settings effective and see if they have reverted to defaults on first sight of the issue...i'll report back here if that happens because that would be a pretty strong correlation...almost enough to prove cause and effect
Click to expand...
Click to collapse
My device is currently without kaisertweaks, and I still have the freezing issues.

DarkDvr said:
Well, problem is, last time I've used KaiserTweak was like a year ago, so my touchscreen problems cannot be linked to KaiserTweak. I don't even have it on my tilt.
Also, it's definitelly not a touchscreen itself, since this problem is application-dependent. Once again, S2U2 and Opera are immune to this problem. Windows' build-in apps (file explorer, bottom bar, etc) all suffer from it.
Click to expand...
Click to collapse
I concur, it is application specific. I tried to run the "Task manager" from Fdcsoft to see if it was related to a process eating up all the CPU. But the problem doesn't occur while the application is focused.

DarkDvr said:
Never really caled for it, I use my hardware buttons (D-pad) to scroll, I find TouchFLO to be too unreliable... maybe it's just me, but nothing beats a hardware button which you actually "PUSH".
Click to expand...
Click to collapse
TouchFlo is way too unreliable to me too.

DarkDvr said:
True, if I keep pushing on the screen button, in about 5 seconds it will be clicked. But that's ridiculous, i gotta say.
I use PocketMechanic - good stuff. Has lots of useful functions, including notification queue cleanup and analysis.
Click to expand...
Click to collapse
Oh wow, not a LONG PRESS, literally a 'touch' vs a 'tap'. What you describe would be seriously annoying.
Thanks for the suggestion, I'll look at it

Tilt unresponsive to anything (not just touch)

I have searched and found some thread's about this sort of this but not exactly the same problem. I am using GARMIN'S FINAL ROM which I must say it awesome. Stable and the fastest I have seen yet but I am still have one problem, at certain point's my phone doesn't respond to touch, clicking of the front key's and even sometime I have to press button's on the keyboard 3 or 4 time's just to get it to type. I thought it could just be lag but even when I give the phone a few second's to do it's thing (load fully) it doesn't work properly? I mean even sometime's when I press the end key the friggin button's don't even light up.
I hope there is some help because I just got the Tilt and it seem's like a great phone but this is just getting to be stupid.
Thank's ahead of time.

i have the same issue with hyper dragon rom. and no, im not running any programs, memory usage is 48% (running nothing) however the screen wont respond to touchs, the keyboard wont respond etc but the cursor still blinks, animations still play etc.
ive already tried all of the "keyboard" fix's, adjusted the settings manually etc yes i calibrated the screen multiple times *waits for somebody to reflash even though i did that *

I was having that problem and I found the only way to workaround it was to re-align The screen in the Start>Settings>System>Screen menu. But, I have not had it since installing SJ's 15 November 08] HyperDragon III Raphael version here
http://forum.xda-developers.com/showthread.php?t=397121
I strongly recommend it. All you need to do is remember to install Opera 9 last per Notes at the top of the post.
Hope that helps.

I am going to try that out, it look's cool but it look's like there is way to much stuff for it to run fast? Also if I don't use Opera I don't need to install it correct?

bump! Any other idea's?

I have the same problem but mostly notice it when the phone comes out of sleep. The phone will work right then slow to a stop and not allow any input via the screen or keys. 10 seconds later it's good to go.
Edit
OK the fix I can confirm that woks is that you have to sim unlock your phone with the newer 6.1 roms. I did it and it completely fixed my lag problem. Use the kaiser unlocker to do it and it can be found with a simple search. Make sure you have a the right SPL and newer radio to make sure everything is compatible.

HELP! T-Mobile Vario 3 might have bricked itself

My stock T-Mobile Vario 3 has been performing fine for two years, until yesterday when for some reason Bluetooth would not enable when I clicked on the icon (otherwise the phone seemed fine) so I did a basic Windows shutdown/reboot as I have plenty of times in the past.
The boot initially got stuck on the first white T-Mobile boot screen with the ROM/etc revision numbers on, and would not go any further. I removed and re-inserted the battery and tried again several times, and after a couple of tries it managed to get as far as the first green Windows load screen before sticking again.
I think it must have hard-reset itself at some point during these attempts though, as now it will sometimes go as far as the default "tap screen to calibrate display" message, which I can tap and then see the central cross-hair. If I tap on this quickly enough it sometimes moves the cross-hair up to the top-left, but then it locks and won't do anything else unless I disconnect the battery again. That's the best I've been able to get it to do so far.
Help! Any ideas?
Andre

I came to the conclusion that I wasn't going to get my old system back so I forced a hard reset myself (two soft-buttons & reset hole) and it has now reloaded to factory default, but as least it's working which I rather doubted it would be.
Photos, music etc were all on the memory card, and contacts/calendar info were daily synced to my PC, so there only some old SMSs lost which isn't too bad.
Oh well, I guess I can now look around for a more modern ROM for it (now that there's nothing on there to backup/reinstall). Anyone got any particular favourites? (as there do seem to be a lot around!)
Andre

andrewilley said:
I came to the conclusion that I wasn't going to get my old system back so I forced a hard reset myself (two soft-buttons & reset hole) and it has now reloaded to factory default, but as least it's working which I rather doubted it would be.
Photos, music etc were all on the memory card, and contacts/calendar info were daily synced to my PC, so there only some old SMSs lost which isn't too bad.
Oh well, I guess I can now look around for a more modern ROM for it (now that there's nothing on there to backup/reinstall). Anyone got any particular favourites? (as there do seem to be a lot around!)
Andre
Click to expand...
Click to collapse
Since there are a lot roms out there, the only one who knows what is looking for is you..yes...you...Andre because, what's favorite for me probably will not be "favorite" for you, that's why there are so many options out there. Try a couple of them (6.1 or 6.5) it does not take a long time to flash them (< 10 minutes). After that, you will come up with your favorite as many users in these forums. You will definitely will enjoy the flashing and testing the different roms!. That's what I feel LoL