Hey Folks,
i planned on flashing my Blackstone to Duttys V2.5. I flashed it two or three times before. The running Vista had Service Pack 2 Beta installed. Using USPL, everything worked fine, since i used the special Vista x64 Driver which i found on the forum.
So, i had to format my Laptop. I changed naothing, except my harddisk and my RAM and i installed same OS (Vista Business x64). So i flashed my phone again, right after formatting. Everything was fine, again.
So i installed more and more software and Service Pack 1 for Vista and i wanted to flash again. But this time it didn't work. Vista wouldn't let me load the custom drivers in Device-Manager. It always gives ma a "Code 39" error, which basically says, the driver is broken. So i can't start USPL and can't start the ROM Update.
I downloaded it again, etc but nothing would change. Tried removing it completely and so on. Nothing works...
Anybody knows a solution? Wanna flash my Blackstone again!
Thanks!
Related
Hi, i've read the "How to" from this URL http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66 but with no success.
Device Manager shows an error code 39.
I just don't understand, i followed everything without errors from the start.
what can i do now ? i want to reflash my radio rom from 1.50.08.11 to 1.46.30.11. My battery was draining slower with that one.
Thanks !
first of all, it helps if you post this under the thread for trinityguides...
you had your device in bootloader and connected before step 2?
are you vista 32 or 64?
it's quite strange cause most people had success with these steps. How have you flashed your ROM in the past?
same for me. the reason is that vista isnt able to install the drivers when the bootloader start.
vista 64bit only works with signed by ms driver be that videocard drivers or pda drivers
if you ask me 64bit is not yet for primetime
drivers are few and limited
support for many external things are non
funny to see how pc entuthieasts pay that much for
vista ultimate when the only thing they get is the 64bit option
and backup and some crypting options which if they ever use
they'll cry salty tears when they have to reinstall and cant
get access to their data anymore
ultimate dont mean it's faster or better
just that one gets the full ms bloatware packet
yeah... the guide shows how to load the unsigned drivers though...
are the two of you running 64 or 32bit vista?
his title "Unable to flash under vista x64"
the x64 would sugest that he's using the 64bit version
mmm... you are observant haha... can't believe i missed it
Same problem here, did what was written in the trinityguide (twice now), but to no avail. Code260 (no connection)
Vista64
-EDIT-
Fortunately my laptop runs on vista32bit, update works like a charm on that one...
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
racerx_ said:
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
Click to expand...
Click to collapse
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
yeah, i'm really sorry to hear that. Most people have been successful. Every once in a while, someone reports that they have had trouble with it, but i don't have vista x64 to troubleshoot.
i remember reading in another forum about someone with the same error saying that some kind of optimization option he had selected for vista was the culprit. I think he ended up reinstalling vista with default options and was ok..
(i know that's not really the answer you're looking for, but just thought i'd throw it in there )
hey i was just thinking...
do you want to see if any of these other methods of disabling driver signing work for you, listed in this post
it works under vista x64
If you enable automatic update in vista x64, and you plug in your trinity, after a few minutes a update will appear from microsoft asking that there is a update for your trinity, install it and my phone works and was able to flash new roms on it with this update....i have windows vista ultimate x64 edition...
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
forgot somthing
if you have updated the drivers from microsoft, put your trinity in bootloader and then in "device management" select your trinity and select update drivers...if not your not able to flash.....
racerx_ said:
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
Click to expand...
Click to collapse
I've allready flashed under vista32bit and more importantly, installed all programs and contacts. However, when I update the ROM again, I will try this method and report back...
The_Stranger said:
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
Click to expand...
Click to collapse
ive got vista 32 and i doesnt work 4 me. ive only gotten 1 rom 2 load 4 me. i need a new radio rom and it wont load.ive got the no gsm. wanna fix it bad.
I cannot get any thing to work with Windows Vista. I never had problems with XP and my other Wizard. I had it replaced through the insurance. Please help me. I have been through the threads claiming to have some way of tricking Vista with old drivers. I have installed them and had no change. Read all the threads!!
So Dont do it!!!
Man some versions work some doesnt... TRY XP men if you dont have problems since your first Wizard and xp use.
Dont be in panic mode, is not prooved even if many thread said that.
I'm just pissed, i had a great ROM running on my old phone. now i am stuck with a computer running Vista Ultimate and Mobile 5 on he replacement phone. I was hoping somebody found a way to run these Roms through Vista successfully.
Vista support for Windows Mobile is really hit and miss, it works for some, and not at all for others....your best bet is finding a friend with XP and upgrading it there.
Not G4 specific, moved > Upgrading
i use vmware with an xp image to mod my phone, i run vista x64.
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
scousemartin said:
Upgrade vista with all available service packs then download the latest version of WMDC from microsoft
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download
and try flashing then
If you still have problems try replacing the ruuupgrade files with Muns ones and use these to flash http://forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
if that doesnt work then you havent done what i just said
Click to expand...
Click to collapse
I cannot flash my Wizard now that I have Vista 64-bit. I have followed many different methods that I have found on XDA in the last few days. I've downloaded and ran many different RUU tools, nothing gets me past the RUU crashing.
The one problem that I get hung up on is while installing a new driver for the Pocket PC (wceusbshx64.inf) in device manager I get the error message that the driver is not signed, I click next anyways. I then get the following message "The driver may be corrupt or missing (Code 39)".
Any other ideas? I'm having flashing withdrawals.............
Thank you for your help
Anyone that knows away to get around the above problems? Luckily I still have my XP computer upstairs, so I can still flash new roms. But I would like to keep it all on one computer (Vista)
Thanks
Some day...
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
+ Que PPC said:
I saw a guy with a XP emulator and a partition HD with Vista mostly and a little part with XP Pro ( he use the Vista for work and everything and the little partition just for upgrades but... He use an emulator for vista and he has XP Runing trought Vista... but I cant find the thread again...
Click to expand...
Click to collapse
Thanks, I remember seeing that thread before. I'll have to find XP and give it a try. The XP disk I have is for another computer so I'm not sure it will work.
Thanks
i'm having some trouble.
I've downloaded X1_HardSPL_v1.zip and unzipped it. I tried running from my computer but it came up with an error and same with running it on my phone.
I have windows XP with .NET framework and have the phone and PC synced.
What am I missing to get this working? I read through the thread stickied at the top without luck. The instructions on the first page does not say whether or not i have to run hardspl from the computer or on the phone...
blackice168 said:
i'm having some trouble.
I've downloaded X1_HardSPL_v1.zip and unzipped it. I tried running from my computer but it came up with an error and same with running it on my phone.
I have windows XP with .NET framework and have the phone and PC synced.
What am I missing to get this working? I read through the thread stickied at the top without luck. The instructions on the first page does not say whether or not i have to run hardspl from the computer or on the phone...
Click to expand...
Click to collapse
I replied earlier but the post has gone missing ...
This is strange:
1) 12 months ago I installed HardSPL on my Polaris. This programme would not run on Win2k Pro, only XP Pro SP2
2) about 1 week ago, I installed HardSPL on my (new) X1. This programme would not run from XP Pro SP2 ["... failed to initialise" error ] but ran without error in Win2k Pro
... beats me
Anyway, I used a PC with Win2k Pro and NETCF3.5 installed. The X1 was asynced on the USB cable first. The process took about 4-5 minutes
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5
Hi guys!
I have a big problem. Yesterday I installed Windows 7 on my Shift 9500 according to this guide.
http://forum.xda-developers.com/showthread.php?t=590009
Everything went smooth and I got everything to work except the 2 buttons above the mousepad. I tried everything but I could not get them to work.
I did also update my BIOS to be able to install the BIOS activation according to this guide.
http://forum.xda-developers.com/showthread.php?t=542397
After that I decided to re-install everything and start from the beginning. Then the problems started. When I install the graphics driver, Im not able to get a higher resolution higher then 800x640 or 640x480!! Im have tried everything, with Aero, without Aero, load another driver but nothing works!!
Everything else is OK, mousepad, touchscreen etc...
I have a feeling that the BIOS is screwed?? When I check in devicemanager I have a feeling that there are some new names in it, like the BIOS would not present the correct devices for the operating system.
Is there anyone who might have a solution? I have tried to update the BIOS with the HTC Stock BIOS but is says its the same version I already have installed.
Is there anyone who can provide me with a new stock BIOS? (EU version, swedish keyboard)
Many thanks in advance!
/ Andreas
Did u backed up ur old bios? It seems ur device is flashed with unofficial bios which is too risky for different version of machine. my suggestion is reinstall win7, install all drivers in correct order with vista compatibility except vga driver which u need to get an updated one from intel site. use windows update driver with coutious (make sure system protection is on before updating driver using windows update especially the camera driver). there are lot more ways to get full activated win7 other than flashing bios.
[edit] : we still have pof or cmonex for hope