Cant get this to work.
I'm on a rooted RC8.
Its on autostart etc. when im in the app, and changing led colour, the LED flashes the correct colour. but when i try to use it, it just doesn't work.
I've tried re-downloading and re-installing it.
The older version you had to long press the service you wanted activated. Now the new version you need to make sure the box is checked and the rectangle service box goes from red to green. Did that help?
Related
I accidentally dropped my s730 today. After doing so the screen froze and the phone didn't respond in any way so I turned it off by removing the battery. After trying to turn it on all i get is a split second fail message that says "No Image Found" and then i get a red, green, blue and white screen which says "WING220 SPL-1.31.0000 CPLD-7.
In the white portion it says "Serial" and when I connect with a USB cable it switches to "USB" other than that it doesn't respond in any way shape or form I've been able to figure out yet. A hard-reset using the soft buttons and on button hasn't worked either.
Any advice on how to fix this or am I screwed?
Just flash a rom
Have you put HardSPL or something on? Wouldnt have expected the phone to allow you into that screen without changes. I also wouldnt see it wiping your OS from the phone since its an SSD not a standard disc drive. In the drop you could have damaged the intnernal memory and now its showing the default screen from the chipset?
Give what Sh1n1 said a try and see if flashing a rom will take. Otherwise you might have something broken internally that needs to be repaired.
I haven't installed hardspl or anything like that. Guess I'll try flashing a rom.
What you are seeing is the Tri-Color-Boot screen. Accessed by pressing the camera button and powering on at the same time.
Sounds like the drop made the camera-button defect. Try prying it out carefully (don't pull it out of the shell) and powercycle the phone, or try pushing it some times with the power off. The power on the device.
When I'm trying to call/receive a call, the screen is really messed up. Nothing appears, I get the start menu at the top which says "Phone" on it, the soft key labels at the bottom, and then the part of the screen where the dialer/call status/all that stuff is supposed to be just shows up white. I think it may have started when I tried to answer a call while my phone was locked, or maybe after I changed around the call settings with KaiserTweak so it wouldn't sleep/fast sleep during calls. I reverted those settings to the default, restarted my phone, and still no luck.
I don't really have anything that valuable on there so I'm not opposed to just re-flashing my ROM, but does anyone know what might be causing this? Thanks in advance.
Hi,
Dont know what my friend did to my phone. I cannot enter the bootloader. I have tried all the various buttons but nothing is shown EVER on screen. Is the green light an indication of some sorts? Other than that the phone is on.
Please help. I don't care if I lose everything. I just want my phone again.
PLEASE HELP
My "phone keypad" started not working (when I touched the letter it was inserting the number) so I decided to install an other similar keypad. I found that EzInput has the same look as phone keypad so I downloaded it. When I installed it the program asked me to reset my device so I clicked OK. Then my device restarted and I saw this text:
The device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source, Press SEND to reset your device or press any other button to cancel, This operation will delete all your personal data and restore the device to its factory default settings.
Then I didn't know what to do and I pressed all the keys and then my phone turned off. When I turned it on it freezed on the "TOUCH diamond" logo and the red numbers bellow. Then I tried hard reset and I saw like four different colours lines (as I remember they were white, blue, green and red colour) and text. I didn't know what to do so I was touching the screen and the buttons hoping something to happen. And then it turned off.
Now when I turn it on it still freezes on diamond logo and if I try to hard reset I can't see any colorful lines. I guess that application deleted all the data of my phone. WHAT TO DO?
Sorry if I made any grammar mistakes.
Thanks
install new rom
just flash a new rom..........do task 29 (mtty) and install the rom you like. should be ok then.
Hi! Sorry for my bad English.
My phone "died" while charging, but the notification LED is still blinking as the phone was just in a normal "stand by" status. Tried to call it from another phone, and it was offline.
This is the second time I get the black screen. It happened the first time 2/3 days ago, that time the phone was just sitting somewhere, then black screen, but the notification LED was blinking, so I tried to call it and it got stuck on the call ringing for like 10 minutes, then I found the reset thing on their site and it worked. This time it doesn't work. Also tried to connect it to a PC while holding the volume down button down, still didn't happen anything. Without holding the button down, nothing happens as well. PC Companion doesn't see it, Windows doesn't see any new device connected. The LED is still blinking. Didn't find anyone with the same problem, and those whith something similar to this, got it fixed with the reset buttons (like I did the first time) or had to send it in for repair... is there anything I can try before having to send it for assistance?
Both times, the LED is blinking blue, like a normal notification blinking, it was probably blinking this way because of an actual notification. It was at around 10/15% battery when i plugged it to the charger, and it was turned on. I didn't do anything to the phone since I bought it, I actually use it as it was a camera that can make phone calls and send messages, never connected to a PC.
I'd rather open it up and disconnect the battery (if that could help) than send it for assistance and maybe get it screwed even more or replaced with something worse...
Thank you!
Keep your xperia T on charger for 24 hours download the latest firmware for your phone and install it with the flashtool.
Had the same problem
Sent from my LT30p using xda premium
Thank you, rayenvs, but "nice" ways didn't work.
So I removed the cover and disconnected the battery, now it works again.