It was ofisial German rom based, customer try to load some firmware and now its only in tricolor. I try to find ofiitial german rom but no sucsess. There is dumped roms and phone is stuck at 0% when i try to load it. When i try to load factory rom ex. RUU_Jade_hTC_Asia_HK_WWE_1.40.721.2_Radio_Signed_Jade_12.27.30.09_0.27.30.09_Ship.exe it stop at 1% and reboot. Please help....
Sorry for my bad english.
polifon said:
It was ofisial German rom based, customer try to load some firmware and now its only in tricolor. I try to find ofiitial german rom but no sucsess. There is dumped roms and phone is stuck at 0% when i try to load it. When i try to load factory rom ex. RUU_Jade_hTC_Asia_HK_WWE_1.40.721.2_Radio_Signed_Jade_12.27.30.09_0.27.30.09_Ship.exe it stop at 1% and reboot. Please help....
Sorry for my bad english.
Click to expand...
Click to collapse
I believe hard spl is not done on the device so its struck at 0% or 1%. No choice u have to use german stock rom i believe
Look for German Stock in google..
Related
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I dont know much, but i think its that you tried to downgrade withe a wizard that dosent support downgradeing. i.e spl/ipl ending with .001 i will just say try and get a replacement.
This is exactly why there are so many replies to newbies saying "Read, Read, Read and then read some more".
I'd agree with the theory that your device was a G4 chip (which should never be flashed with a 1.x Rom).
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
If he can get the boot loader then he can flash the previous rom back :wink:
i am not sure which key u have to press. best man to ask is buzz lightyear
The problem is that I can't enter in BootLoader mode. I try with camera+reset and camera+voice+reset but the screen is always black.
Can't you return it to Imate with a story that the battery was empty, you wanted to charge it, but it stay dead?
I hope you got warranty.
Claus72 said:
I have a Imate K-jam with K-JAM_WWE_216901_2169101_020710_ship rom and I have try to downgrade with the rom K-JAM_Italian_1030902_102_ship and the file newromupdateutility_wizard_noid.exe but now the device is dead.
After upgrading the device was resetted and now the screen is black. I have try reset, hard reset and to enter in the bootloader but nothing appened.
Someone can help me, please?
Sorry for my English.
Click to expand...
Click to collapse
I got the same problem after upgrade my MDA Vario(T-mobile NL) by using RUU_Prodigy_2170702_217_20710_TMO_US.exe from the ftp.
It looks like no power at all. Anyone knows how to solve this?
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hey guys i tried to update my rom and while the update stops in 99% and said updtae ultiality Error.
now my Telefone doesn't start and stay in the 3 Colors Screen.
please Help
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
FloStilo said:
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
Click to expand...
Click to collapse
Always post the vital data of the phone,which is your device,G3 or G4,post the present IPL/SPL...? of the phone.Which rom you were trying to flash ?Does your phone get into bootloaders (tricolor screen) ?
It won't activesync in bootloaders or in the absence of a working rom (OS),but its possible to flash a rom in bootloaders.Download the official rom from the carrier's site and flash in the bootloaders to recover back to its default status.
Cheers!
Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.
Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave
Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me
I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please
I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps
i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)
ive got a "xda diamond" (o2-unlocked) and its in german...
i installed hardspl but i cant flash any other roms,ive tried "Energy.DIAMOND.29020.Sense2.5.Cookie.2.0.Touch.Of.Glass.May.15"
and
"Memo 2.7.3.0_Std" and it wont go from 0% and after some time i get an error
right now it says
rom version: 2.03.207.2 GER
rom datum: 02/13/09
funkempfangerv..:1.09.25.23
protokoll-version:52.51.25.26h
im no german i want english... please some 1 help me what to do
Try flashing a stock WWE(World Wide English) rom. Then try to to upgrade to a custom rom. If it still doesn't work try using a different version of Hardspl.
Here is a link to some diamond stock roms:http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
Hope I could help
i changed hardspl and then tried again with "Memo 2.7.3.0_Std" and it worked
thanks