Database Develop

Stuck At 28%

I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.

should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL

which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.

i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special

Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.

can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here

i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.

I have the same problem with 28% stucking
I try to reflash but I still have the same

do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already

I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?

I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps

you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?

Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm

Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!

I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck

IPL/SPL 1.08.001 - Flashed = dead (Fixed)+(Changed language)

About a year ago I flashed my fresh p4350 with (if I well remember) Aserg's rom. I was quite a noob and I don't remember if there was any warning about the IPL<4 warning. So I got a brick ever since.
I just turns on and gets stuck on the white HTC logo, the boot with the camera button pressed works and appears "USB" on the bottom while line.
I looked for some fixes on this forum but I didn't see anything helpful.
Do you now how/if I can unbrick it?

Somewhere to start
Send it to me Ill fix it and use it...nah, Im just kidding. Try looking up hard slp, or you can put your phone in bootloader mode and flash a stock rom. But with Hard slp ur flashing from the sd after...should help you. Another suggestion is to take the radio out of the rom your flashing. Look all of this up, it may help you.

Your problem could be solved: You have to 1st) do a hard reset
then flash with original flashfile, and its done

I don't remember what I did last time I tried but it worked perfectly, I just opened the original updater
HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe
when the phone was in the bootloader and it worked.
Well, now I need to change the language
I tried to HardSPL it now but it says that the image is corrupted, so I'm going to download it again and try again.
Thanks a lot!
.... unless anyone wants a P4350 in Spanish, pretty much new, unfortunately never used...

I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too

bayxsonic said:
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
Click to expand...
Click to collapse
Help........
I have the same problem, but I Danich......help me

Phone keeps hard resetting

Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed

Whenever you flash a new rom your phone will automatically reboot and start up again. The phone will need to be setup again with date/time etc but connections etc should automatically setup itself.
This is similar to a hard reset as everything has been wiped from phone apart from OS and whatever you had stored on SD Card
Once setup go to Settings > System and it should state which rom you have installed

Yes but it starts up again with setting time date and so on.
When finished loading files, it starts over as you says, but then rom starts loading again. its like it hard resets all the time instead of just resetting..

I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on

Megawhopp said:
I flash. allign screen - set time date and so on - files load - phone restarts
And then i shall allign screen - set time and date - load files - phone restarts
and on and on and on
Click to expand...
Click to collapse
Ah, right. Apologies. Now I understand your problem better.
Had you ever successfully flashed a rom? Or has thius always happened with a cooked rom?

Megawhopp said:
Hi,
I have just tryed to flash both newest laurentius rom and newes kwbr rom
Flashing goes ok, but when all files are loaded, phone just resets and starts all over again.
im on spl-1.56 Olinex
Help needed
Click to expand...
Click to collapse
You can better ask it in L26 ROM topic, but I know that Laurentius ROM (2.3 or 2.4) KEEPS hardresseting automatically due to bugs in his cooked rom. After 2 or 3 times automatic HR it stops....

Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1

Megawhopp said:
Yes i have successfully flashed roms, i came from kwbr 2.1
i have tryed with more roms than laurentis´ also with kwbr 2.3 and 2,3,1
Click to expand...
Click to collapse
Ok, sounds like a hardware problem to me. I've had only automatic Hard Resets with L26's Rom. No problems with Kwbr or Dutty's roms.
Try flashing via USPL and tell us how it goes.

had same problem with l26 rom will never use laurentius rom's again, dutty's and miri's roms are the best

I have tryed with USPL and its the same

Now i cant do anything from my computer. How is it that i flash from sd card?

Credits to JohnQ
"take a look at your SD card. direct folder storage card/sdconfig.txt. delete the inside code. im sure there is a code which means hardreset after flash/hardreset. i dont know what it means but i just delete it. but it still hardreset again. so let it hardreset again. then it will be ok until you hardreset your self. lol."
I did it and it worked as a charm. Have you flashed you device with the memory card inserte into it?

no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom

It worked.. My phone is now alive with danish ship rom..
I will now try to flash newest from Miri..

Megawhopp said:
no i didnt flash with memory card in it, and memorycard is not in it now
i just managed to flash danish ship rom, but cant seem to flash stock uspl
i will see if phone starts up wit danish ship rom
Click to expand...
Click to collapse
Anyway, take a look into you SD Card through you PC...is there a folder named "sdconfig.txt"?...if so, take a look into this "sdconfig.txt" and, please, tell what is written into it...

nope, is no such file

Cant flash miris. Just stays at 0 %

managed to get phone back to hard spl thanks to crackwhores fantastic guide.
And at the moment im flashing miris newest rom..
Hope it works

Megawhopp said:
nope, is no such file
Click to expand...
Click to collapse
But what matters is that you have your baby back
Greetings.

Nope, its not..
Miris didnt work either, and despite the fact that im on hard spl phone is now with the blurry green screen.
Im beginning to get lost now..
What to do..
Please help

My HD auto reset back to default setting ,after restart from hang

After i flash rom. When my HD phone hang, so take out the battery and put it back to restart it .. the whole phone will reset to default..... just same like brand new phone without setting. it happen many times, what happen on my HD ?

Have you tried using the red reset button next to the SD card slot?

Yes i do , i try many kind of restart , but when my HD hang ... i restart it. it will back to default setting

if it happens always with the same rom, i suggest you try to change rom and see if that happens again. if it happens with different roms, you should flash back your stock default rom and then proceed flashing another custom rom and see if it does it again. Many times reverting to stock rom from time to time has been proven to solve some weird behaviours.

I would suggest flashing stock rom first before following this guide to flash a cooked rom again

crashDebug said:
if it happens always with the same rom, i suggest you try to change rom and see if that happens again. if it happens with different roms, you should flash back your stock default rom and then proceed flashing another custom rom and see if it does it again. Many times reverting to stock rom from time to time has been proven to solve some weird behaviours.
Click to expand...
Click to collapse
Thank you for suggest, i will try to find the original rom to flash and try it, see can solve my nightmare or not

Fallen Spartan said:
I would suggest flashing stock rom first before following this guide to flash a cooked rom again
Click to expand...
Click to collapse
erm.. i have read it.. but a bit confuse on that

natureborn said:
erm.. i have read it.. but a bit confuse on that
Click to expand...
Click to collapse
Did you use either HSPL or USPL before flashing rom? You will need to use one of these or your HD will hang. If you are having difficulty with that guide, post your query in that thread

I have got mine reset to default too.
My rom is Xannytech 2.2
HD Hangs. After a reset, it returns to the setup progress.
The setup progress is the setup progress of installation.
After the installation, calibrate the screen, set time zone.
the rom returns to function!!!
I am lucky I have saved all my data in the SD card, and backup my contact list and sms in Myphone.
It is quite a good auto recovery system.
The only application I installed is chinese font and htc 6.1 chinese input method.
Before the HD phone hangs, it is running opera 9.7.
I have ~ 500 contacts. and 300 sms..

As per Fallen Spartan's question above, have you used either USPL or HSPL before you flashed?

hktotti said:
I have got mine reset to default too.
My rom is Xannytech 2.2
HD Hangs. After a reset, it returns to the setup progress.
The setup progress is the setup progress of installation.
After the installation, calibrate the screen, set time zone.
the rom returns to function!!!
I am lucky I have saved all my data in the SD card, and backup my contact list and sms in Myphone.
It is quite a good auto recovery system.
The only application I installed is chinese font and htc 6.1 chinese input method.
Before the HD phone hangs, it is running opera 9.7.
I have ~ 500 contacts. and 300 sms..
Click to expand...
Click to collapse
Whats your SPL in bootloader? Was USPL or HSPL successful? Did you hard reset after flashing rom?

I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.

Z3rO` said:
I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.
Click to expand...
Click to collapse
Alternatively flash stock rom before flashing another cooked rom. This method appears to solve a number of reportewd issues

Z3rO` said:
I had exactly the same problem after using xannys 2.2 rom. I'm using Hardspl. Even reflashed HSPL but it didnt help.
What did help was to flash another rom (Xnors) multiple times. Since that my phone did not hang again.
Click to expand...
Click to collapse
I am sure Xannys 2.2 have this problem , i have already flash many many rom for more than one year is no problem.

The same happens to me but with all the roms (Xanny, Sh3lby 1.10/1.9/1.7 (although they were working fine), Xnor and PDAViet).
Do you know where I can find a stock rom?
- Bya -
EDIT: Found on the HTC official website and look here for the method.
EDIT2: Owned by Clyde ^^"

Bya said:
The same happens to me but with all the roms (Xanny, Sh3lby 1.10/1.9/1.7 (although they were working fine), Xnor and PDAViet).
Do you know where I can find a stock rom?
- Bya -
Click to expand...
Click to collapse
You can look here

Actually problems appear when I use Myphone. 2 options:
- Either it finished and then it freezes randomly from then, hard-reset itself, never complete it, reboot and get stuck on the black screen with radio information.
- Either it doesn't finish and when I try to exit/stop the program, it freezes and same than above happens.
Trying to get back to stock rom but battery's still not at 50% charge. So waiting a bit and playing with it without using myphone to see if it get blocked again...
- Bya -

Fallen Spartan said:
Did you use either HSPL or USPL before flashing rom? You will need to use one of these or your HD will hang. If you are having difficulty with that guide, post your query in that thread
Click to expand...
Click to collapse
Yes, i use HSPL (ISO-8859-1''HSPLWrapper_Blackstone_156OliNex ) , then the rom i flash is RUU_Dutty's_HD_WM6.5_5_Leo_R7 .

Well , i try to combine some of the opinion and flash rom again, this is what i do :
Step 1. I flash back the original rom ( RUU_BlackStone_hTC_Asia_WWE_1.18.707.3_Radio_52.49a.25.26_1.09.25.14_Ship ) . then hard reset twice.
Step 2. Then install HSPL (ISO-8859-1''HSPLWrapper_Blackstone_156OliNex ), then reset twice .
Step 3. Flash custom rom ( RUU_Dutty's_HD_WM6.5_5_Leo_R7 ), the reset twice .
Today is my second day after flash... so not sure will have the same old problem happen .... i wish nothing happen and can use smooth

I experienced the same issue with Miri V 14.0 two days ago. I never believe it does happen until it happened to me despite the fact that I always flash a custom rom before flashing any cooked rom.
Mine first came up with a message that I need to reset my device to factory settings because I have installed an application that is not compatible or not signed on my phone, message was when I performed a soft rest after phone freeze.

Error 626 when hard spl

I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.

go to olinex hard spl section and write about your problem maby they can help u

Onlinex hard spl section?
I must be blind. Where is that?

matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here

matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.

Tried both checked and unchecked and dont work

I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS

Great!!! I will remember that one too.