Database Develop

How to fix a bad radio flash ? "no gsm" on boot

Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?

update
after the boot, i've got a "no gsm" message near the radio version

other people got the same problem like me ...
God oli, help me please

I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL

Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.

You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !

doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff

I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.

i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.

Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!

nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards

Flash HSPL, then issue task 2A command from mtty. Flash full ROM.

Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.

stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?

thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....

hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone

Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )

hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it

hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.

macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me

messed up my HD please help

I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?

i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore

can somebody help me I just wanna know how i set back to standard rom or what you call it

the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers

yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.

Read this:
http://forum.xda-developers.com/showthread.php?t=505377

great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%

k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.

k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..

i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading

Has this been resolved? Or do you still require help?

still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone

k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?

flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out

k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms

i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip

k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?

it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S

..........

bricked question

this phone got brick due to updating of a rom without hspl
and now this is happening to the phone when trying to do anything
It is just going in and out of the bootloader.
The message in the red part is " TOPA*** 32M
SPL-1.33.01 iNex
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
The message that is in the green part is "NO TP MFG DATA. UPGRADE ROM CODE ERROR"
i tried to search but to no avail...this is for my friends phone

All is hope not lost....
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312

AntonyWatson said:
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312
Click to expand...
Click to collapse
thanx will try and let you know how it goes

upgrading HSPL will solve the issue, search and read harder next time.

[Q] Rebooting, gets stuck at bootup screen

Hi there
I just bought a new Topaz. I have HardSPL and then tried to apply a new ROM. Now it keeps on rebooting - it only gets to the screen where it says TOUCH DIAMOND 2 - and the the red numbers appear in the lower right corner - and then it reboots..
Is it bricked or is there anything I can do??

I tried to hard reset - but it still keeps rebooting

No not bricked.
Must be an incompatible ROM or you didn't HSPL to 2.51.
Just find another ROM, Stock or otherwise (since you are HSPL'd, but check your version first), go into Bootloader Mode and flash with RUU.exe.

Thank you Bruce!!
I'm still having problems though. I have tried to install a few different stock ROM - both 6.1 and 6.5. Everytime the same issue - I get stuck on loading the new ROM and it keeps rebooting.
I have tried to upgrade spl to 2.51 but still the same issue
What else can I do??

What does your SPL show in bootloader mode?
Make sure it has Olinex as a suffix.

Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?

niknik76 said:
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
Click to expand...
Click to collapse
Is it 1.83.Olinex or 2.51.Olinex?
Flashing a ROM w/o HSPL will most certainly mess up your device but it should be recoverable if you can find your stock ROM for your carrier and region.
You symptoms sound as if you are on 1.83 trying to flash 2.51 SPL ROMS.

Hi, im having the same issue as OP, i tried to flash the latest Energy rom (sept 8) onto my td2 and the bootscreen is showing 1.83.Olinex. What do i do to fix this?

You must have HSPL 2.51 for this ROM and for all newest roms.

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......