Database Develop

I Think I just Bricked my AT&T Tilt

Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks

Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.

Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked

Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?

If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )

Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.

Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.

many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.

Messed up when flashing Touch HD - Help please?

Hello.
I have messed up seriously right now. I've flashed and flashed, original ROMs and Duttys, trying to get it to work.
I first got Duttys ROM flashed, but had problems with screnn-color and Flightmode.
Then I flashed directly from Duttys to Original 1.56 ROM, and during flashing something happend (don't know what).
Bottum line is that when starting phone, the screen says:
----------------------------
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
Serial
----------------------------
And that is with normal start (1 push on the start-button).
What to do now? All i want is to get back to original ROM, 1.56 or 1.14. Just so the phone is working.
Thanks A LOT for ANY help I can get.... I'm really stucked now...

in order to flash 1.56 based roms you have to flash hspl 1.56
hspl is not backwards compatible so if you want to flash back to an older rom based on older spl you must flash hspl 1.14 (or whatever)
check cracwhore's dummies guide to flashing roms explains everything

download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process

Hello and thanks for help.
I've read cracwhore's dummies guide about 20 times, but I don't know what to do now.
In the HSPL-thread it says that I "must Have Phone Synced with PC in Windows Mobile!!!". How to do that - when the device does not even start up? I only get the tricolor-screen and what I posted erlier.

cvchetan said:
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Click to expand...
Click to collapse
Thanks alot, I'll try this right away

hey there be sure u hv .net framework installed even before u try this out...

It worked!!
Thanks cvchetan, you really are my hero. Thanks thanks thanks thanks!!!
You don't know how glad I am right now, hehe.. Thanks again!! <3

well its nice tht u hv ur fone back nd workin..
cheers

I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!

AFW said:
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
Click to expand...
Click to collapse
Im having the same problem as you. I hope i havent bricked the phone.

AdamsvillE, go to this thread.

Stuck in bootloader loading screen.

Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.

Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.

yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.

darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?

So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader

Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!

AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt

Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...

OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?

Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.

Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?

Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".

I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.

Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...

Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).

AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted

Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also

can anybody help me at all

Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.

AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers

HELP! Warrenty Problems

Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom

Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks

DominicGood said:
Hey been following the guide on how to restore to Stock just haveing Problems tried installing the HSPL v1.15 which i think is there version im ment to use living in the UK on O2(anyone can confirm would be appreciated) its showing up as 1.15.0000 fine in the bootloader screen and i installed stock OS, Just for some reason it boots up ok says Smart Mobility in White the all of a sudden that white writeing changes to a blue colour and all the colours from there on are messed up, untill i press the power button to put it in sleep and then bring it back the colours are then fine but it runs slow and the phone side of it doesnt allow me to turn it on, Also likes to restart randomly. Please help need to send it back on warrenty... Thanks alot for any help Dom
Click to expand...
Click to collapse
DominicGood said:
Another Update i just re installed the USPL 1.54 and its running perfect with stock OS. But i really need a solution on how to restore Stock SPL Thanks
Click to expand...
Click to collapse
You say you are trying to install HSPL 1.15, I presume you mean SPL 1.15? The behaviour you describe about the blue/green screen indicates that you have the wrong SPL. What version is your stock ROM, because if USPL 1.54 runs fine with your device, perhaps your stock SPL is also higher than 1.15. I suggest that you try a few other SPL's, most likely to be 1.54. You can download this here

Plenty of threads already exist about returning to stock for warranty, as well as advice in wiki and bottom of first post in HSPL thread.
Future correspondence should be directed into that thread.
Thread closed

Error 626 when hard spl

I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.

go to olinex hard spl section and write about your problem maby they can help u

Onlinex hard spl section?
I must be blind. Where is that?

matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here

matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.

Tried both checked and unchecked and dont work

I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS

Great!!! I will remember that one too.