Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.
yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.
darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?
So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt
Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...
OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?
Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?
Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".
I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.
Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).
AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
can anybody help me at all
Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.
AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers
Related
Hello.
I have messed up seriously right now. I've flashed and flashed, original ROMs and Duttys, trying to get it to work.
I first got Duttys ROM flashed, but had problems with screnn-color and Flightmode.
Then I flashed directly from Duttys to Original 1.56 ROM, and during flashing something happend (don't know what).
Bottum line is that when starting phone, the screen says:
----------------------------
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
Serial
----------------------------
And that is with normal start (1 push on the start-button).
What to do now? All i want is to get back to original ROM, 1.56 or 1.14. Just so the phone is working.
Thanks A LOT for ANY help I can get.... I'm really stucked now...
in order to flash 1.56 based roms you have to flash hspl 1.56
hspl is not backwards compatible so if you want to flash back to an older rom based on older spl you must flash hspl 1.14 (or whatever)
check cracwhore's dummies guide to flashing roms explains everything
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Hello and thanks for help.
I've read cracwhore's dummies guide about 20 times, but I don't know what to do now.
In the HSPL-thread it says that I "must Have Phone Synced with PC in Windows Mobile!!!". How to do that - when the device does not even start up? I only get the tricolor-screen and what I posted erlier.
cvchetan said:
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Click to expand...
Click to collapse
Thanks alot, I'll try this right away
hey there be sure u hv .net framework installed even before u try this out...
It worked!!
Thanks cvchetan, you really are my hero. Thanks thanks thanks thanks!!!
You don't know how glad I am right now, hehe.. Thanks again!! <3
well its nice tht u hv ur fone back nd workin..
cheers
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
AFW said:
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
Click to expand...
Click to collapse
Im having the same problem as you. I hope i havent bricked the phone.
AdamsvillE, go to this thread.
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?
i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore
can somebody help me I just wanna know how i set back to standard rom or what you call it
the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers
yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..
i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading
Has this been resolved? Or do you still require help?
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip
k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?
it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S
..........
Hi, Guys.
I've searched and read every related thread I could find about this, but I'm having no luck.
The details of the phone are:
R:1.14.25.24
G:52.64.25.34H
D:1.59. dutty
I've been trying to put WM6.5 R9 Turbo on it from http://www.duttythroy.net/
It would boot to the point where I'd tap to set up the + points, then I'd set a password etc.. But the graphics were still in 3 color mode, if I turned it off and on again, it'd show the full colours. I've reached the desktop before, with the new pretty icons and reached parts of the rest of the interface, but it jams and is very crashy...
Any ideas guys?
Thanks.
have not looked good ...
for the last rom you have to use HardSPL 1.56
http://forum.xda-developers.com/showthread.php?t=431217
So with my 1.14.25.24 Touch HD, should it be possible to put the latest WM 6.5 roms on to it?
From that thread, I've downloaded the very top attachment, and placed that in my directory with the full BLACIMG.nbh file and the other files and I'm using that to flash... It's progressing, 20%, 21% etc...
Does that sound like I'm doing it right?
After I used the USPL file, which completed successfully, the bootloader now says 1.15xxxx..
Thanks for the help, really appreciated, I'm a techy programmer myself, but never felt so stumped by technology before...
Mike.
i-CONICA said:
So with my 1.14.25.24 Touch HD, should it be possible to put the latest WM 6.5 roms on to it?
From that thread, I've downloaded the very top attachment, and placed that in my directory with the full BLACIMG.nbh file and the other files and I'm using that to flash... It's progressing, 20%, 21% etc...
Does that sound like I'm doing it right?
After I used the USPL file, which completed successfully, the bootloader now says 1.15xxxx..
Thanks for the help, really appreciated, I'm a techy programmer myself, but never felt so stumped by technology before...
Mike.
Click to expand...
Click to collapse
Yes, you are able to flash latest WM 6.5 roms onto your device. From what I've read everything your doing sounds right. Once you have SPL 1.15.USPL you are reading to flash rom. Just follow guide and you'll be fine
Hi, I've used the HSPL 1.56 as advised and ran the ROM flash again, it completed successfully, and I get as far as the orange Windows screen after tapping to setup the screen, There's an orange scroll/progress bar and then the Phone restarts...
I get to the smoky desktop background after it restarts, but it's in 3 colours, and is really unresponsive. Seems no different than it was before using the HSPL... If I turn off the screen and turn it back on again, it shows in full colour, but still quite unresponsive to touches and none of the softkeys do anything. It quickly crashes..
Any ideas what could have gone wrong?
Again, really appreciate the help.
i-CONICA said:
Hi, I've used the HSPL 1.56 as advised and ran the ROM flash again, it completed successfully, and I get as far as the orange Windows screen after tapping to setup the screen, There's an orange scroll/progress bar and then the Phone restarts...
I get to the smoky desktop background after it restarts, but it's in 3 colours, and is really unresponsive. Seems no different than it was before using the HSPL... If I turn off the screen and turn it back on again, it shows in full colour, but still quite unresponsive to touches and none of the softkeys do anything. It quickly crashes..
Any ideas what could have gone wrong?
Again, really appreciate the help.
Click to expand...
Click to collapse
Sounds like something went wrong when you flashed HSPL 1.56. Check your SPL in bootloader. Does it say SPL 1.56.Olinex?
No. It still says SPL-1.14.0000.
When I've run the HSPL 1.56 and it says it completed successfully... :S
These are the steps taken.
I've updated the vista driver for the USB connection.
Ran the USPL.exe which completed successfully "Happy flashing".
Ran the HSPL 1.56 as advised above, then ran BlackstoneRUUWrapper.exe which came with the WM6.5 Leo.
Now, the bootloader says SPL-1.14.000.
Thanks for the help so far.
You should really be posting this in the dummies guide thread.
Have you tried this:
Troubleshooting - manual SSPL
Boot up your phone.
Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
Go to step HSPL3 if successful.
Post any further queries in that thread
hello!i have an htc touch diamond 2 and i used hard-SPL in order to put a new rom to my device.i did it successfully(at least pc said so) and then i installed a rom energy topaz successfully too.but when it was done my device restarted on its own and it cant boot.the only thing that it does is to appear the htc green logo in white screen and then restarting again and again and again!!i kept the volume down button and it booted on the red-green-blue-white screen and it says this:
TOPA100 32Μ
SPL-2.51.oliNex ------>on the red part
MicroP-Topaz (led) V10
TURBO HW/TURBO SW
TPMFG DATA
517,557 190,896
186,212 854,214 --------->this one one green part
847,894 calibrated
and on the white part it says usb when its connected with pc and serial when its not!!what can i do now?i tried also some other roms for topaz which were succefully loaded too but the same thing happens again and again.i would apriaciate some help.
thanx.
billyprepo said:
hello!i have an htc touch diamond 2 and i used hard-SPL in order to put a new rom to my device.i did it successfully(at least pc said so) and then i installed a rom energy topaz successfully too.but when it was done my device restarted on its own and it cant boot.the only thing that it does is to appear the htc green logo in white screen and then restarting again and again and again!!i kept the volume down button and it booted on the red-green-blue-white screen and it says this:
TOPA100 32Μ
SPL-2.51.oliNex ------>on the red part
MicroP-Topaz (led) V10
TURBO HW/TURBO SW
TPMFG DATA
517,557 190,896
186,212 854,214 --------->this one one green part
847,894 calibrated
and on the white part it says usb when its connected with pc and serial when its not!!what can i do now?i tried also some other roms for topaz which were succefully loaded too but the same thing happens again and again.i would apriaciate some help.
thanx.
Click to expand...
Click to collapse
Sorry i didn't get back to you sooner and you added the perfect amount of info
ok where to start - firstly have you tried a hard reset after flashing the ROM this isn't always needed but may possibly free something up to make the energy ROM work. You could also try flashing back to a stock ROM from the HTC website and then re-flash the one you want after everything is ok on the stock ROM.
when you say successfully loaded do you mean the screen shows 100% (phone not computer) or does it say complete as it can say 100% on the screen for a little while and not work ? I don't do mine by the PC i use a memory card to flash it and mine always comes up complete when done and then press a key to restart the phone.
failing all of this head back into the hard_spl thread run the spl_relocker in the first post and once relocked flash with hard_spl 1.83 no idea if the newer version is less or more buggy but i use 1.83 and it's smooth sailing.
You could also try flashing from a memory card instead if you have one to hand
thanx warlordxxx!its done!
billyprepo said:
thanx warlordxxx!its done!
Click to expand...
Click to collapse
No problemo
Hello everyone!
I recently installed Android Froyo 2.2 (Incubus26Jc's Super FroYo RLS15 All Language), following mainly this thread http://forum.xda-developers.com/newthread.php?do=newthread&f=602, and also reading many others, about hardspl etc.
Everything went perfect! The phone workes just fine, full functioning!
My problem is that, after deciding to go back to windows mobile for selling my phone, I followed these steps :
"Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH.
Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button. Follow the instructions on the screen to flash your Kaiser. When the flashing is done you should be back to running Windows Mobile."
I downloaded the shipped rom RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17 but the update process stopped at about 1/3, and the phone rebooted with Android OS.
Also, when I press the power button+camera button, for a new update flash, after the three colors screen(KAIS130, SPL-3.07.0000, CPLD-8), the message "Loading..." appears and stucks.
I guess, my phone no longer has hardspl, and there is no way to put it back, neither put back the signed rom, if there is no WM os????
Any help/suggestions???
Thank you very much, in advance
I suggest you follow the tutorial switch back to Windows Mobile by Dukenukemx ~ http://forum.xda-developers.com/showpost.php?p=6461906&postcount=1
looks like a really lost hardspl. Maybe this will help you get back to windows http://forum.xda-developers.com/wiki/index.php?title=Kaiser_stuck_at_bootloader
aris0602 said:
I downloaded the shipped rom RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17 but the update process stopped at about 1/3, and the phone rebooted with Android OS.
Click to expand...
Click to collapse
One question:
What version radio was on the phone BEFORE attempting a WinMoBlows flash?
It looks like the shipped rom had the 1.27.12.17 radio included in the bundle and, if so, this would explain the error in flashing.
One thing to check would be at the bottom of "Settings" page, touch "About Phone". Towards the bottom you will see "Baseband Version". The numbers at the end are your radio version and should be the original radio numbers. If it says "1.27.12.17", you've found one problem...
I would say follow dukenukem's post and try to reflash HardSPL again.
I haven't run into this problem yet since I will probably never sell either of my Kaisers... lol.
same problem at my place...
installed android, about 2 month ago, wanted to switch back to win and couldnt do it that simple as say "Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH. " in Dukenukemx's tutorial.
I have tried everything putting on sd card many ROM's Hardspl's, then i found this on my pc RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88. 07_1.27.12.11_Ship when i try to flash via usb (manually enter bootloader and connect usb cable) it get to 1% and reboots and ond rom update software says ERROR [294] : INVALID VENDER ID and above Exit button says: VER4-KBKV5867-HUEbc568-KBKV58670...
and when i try same rom to flash via sd card it says
Loading...
Checking...
0028002
Not Allow
with any other it stay's at 0% on phone and nothing is showed, then on RUU says ERROR [262] : UPDATE ERROR and down is button Recovery, tried a lot's of times nothing...
Then i saw that you PoXFreak said to check radio in baseband mine is 1.65.17.56
any sugestions please?
Another user with problems...
Tried a return from android to windows mobile because of the random locks that were happening in android (also some other weirdnessess...)
Now when it is put a microSD with kaisimg or kaisdiag it goes into white loading screen and stay there...
(tried flashing Kaiser_HTC_ASIA_HK_WWE_3.34.721.2, that seemed to be the one who came with my phone)
The baseband message somebody talked above shows only "HTC"
When in tricolor bootloader the following is showed:
security unlocked
KAIS***
SPL-3.28.0000
CPLD-8
(Still gonna try updating it connected to the computer, seems like usb and serial dettection are working, for it will dettect the charger connection and start showing USB in the lower part of the screen, battery got very low overnight, still needing to charge it to really do some test)
_____________
Update:
Flashed ok through USB, just entered tricolor bootloaded, connected usb and executed the original rom installer.
hello everyone
I used to have this kind of problem.. my hard spl broke when i tried to flash a stock wm rom from android.
In my opinion, each stock roms comes with specific SPL, radio version, etc. It means that when you are trying to flash stock rom, you also flashing new SPL. the problem is, the new SPL broke your hard SPL so you won't be able to flash anything to your kaiser except your original stock rom which comes with your kaiser.
you can find some stock roms for kaiser here : http://shipped-roms.com
Since I'm only sure that my kaiser originaly comes with WWE version I almost tried all the WWE stock roms there, but my search ended when I flashed RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe, this rom works for my phone and it seems that only this rom didn't give me "invalid vender ID" message.
so, keep trying to find your original stock rom
and after you managed to flash your stock rom, don't forget to flash hard-SPL again if you still want to mess around with your kaiser.
good luck
Another way to do it, albeit a little tougher, would be to use Oli's NBH tool and remove the SPL and radio from a stock rom. That way you get to keep the radio and SPL while flashing a stock rom.
Keep in mind that some WM roms only like certain radio versions, and you may end up having to flash an older (or newer) radio to find what works best.