Related
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me
so i was trying to revert back to the stock SPL, and i downloaded Restore-SPL-1.15, and i opened it up and renamed the file to BLACIMG and placed it on the storage card and flashed it and now, the phone loads in bootloader mode and says error and is stuck on the loading... screen i think i really ****ed myself over... can any of you guys give me some advice on what to do?
As far as I know, you must flash stock ROM before going back to the stock SPL. Your problem is probably caused by having stock SPL with non-stock ROM.
Somebody with more experience might offer a better solution, but I would suggest you to read about USPL, I believe USPL is the cure for your problem, read about the details.
So have you successfully flashed the stock SPL? If so, try flashing a stock rom now, use the SD card method (blacimg in root storage card + hold vol up/down and power), if this works then its what vizier said, you can not run a non-stock rom on a stock SPL (without USPL). But then you will be able to continue flashing .
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
itzjonjon69 said:
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
Click to expand...
Click to collapse
Haha good good... I was about to tell you to read the guide in my signature... but I am glad you got it fixed bud!
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
RUUNBH
BLAC100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
reyber said:
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
blac100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
cRaCKwHoRe said:
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
Click to expand...
Click to collapse
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
reyber said:
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
Click to expand...
Click to collapse
It's actually quite hard to flash a rom from the SD card when using SPL... you have to remove and insert the SD card at appropriate times... I would recommend doing it over USB as also suggested by many others.
Have you tried loading said rom over USB when phone is in bootloader and USPL is loaded?
it worked like a charm
i want to thank you very much for your effort
reyber said:
it worked like a charm
i want to thank you very much for your effort
Click to expand...
Click to collapse
Awesome, glad to hear!
Morning all,
I think I've done the same thing. I have stock SPL and a non-stock ROM... I'm on SPL 1.14... I'm a bit stuck because nothing will seem to load on to via USB...
I tried running "RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe", but the phone simply reboots to the bootloader, the bottom text changes to 'USB', but it goes no further. It eventually shows Error 262 (comms error).
Any ideas?
Thanks!
------
EDIT: Managed to resolve this by using USPL to put back HardSPL by OliNex
I think I've been a total idiot and messed up my HD. I hope there's a way to salvage the situation!
I was attempting to flash a 1.56 ROM so tried to downgrade to SPL 1.54; this was going along nicely until it encountered an error and tried to re-start the flash. Now the device is stuck on "Loading..." before begining the flashing process.
If I soft-reset the device, the SPL has changed to 1.54.0000 according to the Bootloader screen but it says "Upgrade ROM code error Please try again".
I've googled that error message and found a few hits but none of them presented a solution; just people asking this question.
Since that, I've tried to Hard-Reset but it brings me back to the same Bootloader error.
I've tried to flash a ROM but the device can't connect to Activesync to use the RUU_Wrapper and flashing via the BLACIMG.nbh on my SD card won't work either; it just goes back to the same Bootloader error screen and gets stuck on the "Loading..." again.
I've also tried to flash the new HSPL which is 1.56 capable but that suffers the same problem.
Anyone have any suggestions? Please? Never encountered anything like this in years of flashing my Blueangel and Tytn.
Full details from my bootloader screen:
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
Upgrade ROM code error
Please try again
Serial
Please use "Search" function before you posting a new thread.
http://forum.xda-developers.com/showthread.php?t=502167
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
dom_mitchell1 said:
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
Click to expand...
Click to collapse
Have you tried reading cRaCKwHoRe's guide for flashing 1.56 roms. Can be found in my signature. If you follow his steps, you should have no problems
dom_mitchell1 said:
That doesn't seem to be the same problem as the one I'm encountering. I found that thread via Google as I said I had searched in my post and flashing the stock HTC ROM that came with my device did nothing to solve the problem; 3 machines here, one running XP, one running Vista and one running 7 all fail to connect to the device to allow for any sort of flashing and flashing via an SD card does not provoke a response either.
--Edit--
Sorry - realised that my reply sounded a little stroppy! Blame it on the stress of having a possible brick on my hands! Thanks for the attempt to help but, like it says above, that solution hasn't worked for me
Click to expand...
Click to collapse
Hi, dom_mitchell1...did you manager to fix you HD ? I have encountered the "exact" same problem...I went from 1.56 to 1.54...and now I am stuck on the bootloader at "Loading...." If you have a fix...can you please let me know...and save my HD as well....thx
If you use USPL you will be able to flash everything you want.
Fallen Spartan said:
Have you tried reading cRaCKwHoRe's guide for flashing 1.56 roms. Can be found in my signature. If you follow his steps, you should have no problems
Click to expand...
Click to collapse
That's what I was following when things went wrong. Don't know what I did but during the downgrade process the flash "encountered an error" and had to restart....only it never did and just left me stuck in the bootloader with an error message.
It's fixed up now though and I'm running Dutty's shipped version quite happily. To fix it I tried different .msi packages from HTC and eventually one of them managed a successful flash. From there I was able to continue with cRaCKwHoRe's guide.
i had a similar problem i was upgrading to 1.56 so i to my thinking reverted to a stock rom them loaded 1.14 stock spl where my phone started showing the error screen i investigated and found that the stock rom id downlosded from the stock rom section must have been tampered with as the signarure was incommplete. so now the spl was reading 114000... as it was stuck in tri screen the data had loaded to my device it justxwasnt signed so wouldnt work i dowladed the appropriat 1.56 rom from htc which includdes the new 1.54spl started it and there i whent stock 1.56 rom with stock 1.54 spl. i than loaded olinexs new hspl im running vista so had to use the manual tool but othere than that installed ok.
i hope that helped in short as long as ur screen is reading a stock spl u can install an apropriat 1.56 rom from htc i belive the issue is caused by impropper signage of some stuff marked as stock here.
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.
yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.
darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?
So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt
Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...
OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?
Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?
Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".
I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.
Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).
AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
can anybody help me at all
Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.
AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
go to olinex hard spl section and write about your problem maby they can help u
Onlinex hard spl section?
I must be blind. Where is that?
matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here
matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.
Tried both checked and unchecked and dont work
I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS
Great!!! I will remember that one too.