Database Develop

bricked phone HEL NEEDED!!!!!!!!!!!

To all,
I had the 1.14 spl olinex and installed the new 1.56.00.00 release of original italian rom.
I had the green screen as everyone knows, so I installed again the spl from original htc (not the unsigned).
Than my phone always starts with the bootloader and doesn't go on. Giving upgrade rom error.
Please help me!!!!!!!!!!

Pietrona said:
To all,
I had the 1.14 spl olinex and installed the new 1.56.00.00 release of original italian rom.
I had the green screen as everyone knows, so I installed again the spl from original htc (not the unsigned).
Than my phone always starts with the bootloader and doesn't go on. Giving upgrade rom error.
Please help me!!!!!!!!!!
Click to expand...
Click to collapse
Flash your stock ROM via the bootloader.

upgrade your rom using BLACIMG.nbh <-- stock ROM.
make sure you choose a MicroSD that you know it works for sure (like sandisk).

that's no brick yet.
copy your ROM file and rename to BLACIMG.nbh and save it in the root directory of your storage card. Plug it in to the phone again and hold VolDn + press Power button to start the flashing process.
If it's really bricked you wouldn't even able to see the SPL splash screen...

THANKS
Dear all,
great persons......you are.
Thanks for answers, but after 3 hours getting crazy I downloaded the original rom and everything goes right............
Thanks all

hehe you wana sell that brick?

No screen after rom update

Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?

MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
What kind of Rom did you try to flash ?
Read this, maybe this wil help for you
Good Luck

MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
well friend check ur spl version..
if the rom u want flash is 1.56 based and ur spl is lower than 1.56 then such problems shall occur..
Try to use hspl 1.56 to update ur spl first (use the cracked HSPL i.e hspl 1.56 olinex) and then flash the rom..
This should do the trick..
if it still does not work get back and we'll help u..

MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
What rom did you flash to your device after flashing HSPL? Or did you only flash HSPL?

Messed up when flashing Touch HD - Help please?

Hello.
I have messed up seriously right now. I've flashed and flashed, original ROMs and Duttys, trying to get it to work.
I first got Duttys ROM flashed, but had problems with screnn-color and Flightmode.
Then I flashed directly from Duttys to Original 1.56 ROM, and during flashing something happend (don't know what).
Bottum line is that when starting phone, the screen says:
----------------------------
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
Serial
----------------------------
And that is with normal start (1 push on the start-button).
What to do now? All i want is to get back to original ROM, 1.56 or 1.14. Just so the phone is working.
Thanks A LOT for ANY help I can get.... I'm really stucked now...

in order to flash 1.56 based roms you have to flash hspl 1.56
hspl is not backwards compatible so if you want to flash back to an older rom based on older spl you must flash hspl 1.14 (or whatever)
check cracwhore's dummies guide to flashing roms explains everything

download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process

Hello and thanks for help.
I've read cracwhore's dummies guide about 20 times, but I don't know what to do now.
In the HSPL-thread it says that I "must Have Phone Synced with PC in Windows Mobile!!!". How to do that - when the device does not even start up? I only get the tricolor-screen and what I posted erlier.

cvchetan said:
download hspl 1.56 olinex and uspl 2.5 from the stick thread named tut dummies guide to flashing..(by crackwhore)
steps there after are..
1..remove the sd card
2.. startup ur fone nd let it go to the screen as described by u..
3.. connect it via usb cable to ur pc(install necessar drivers from the same guide as mentioned above). If all goes ok till now ull see "usb" written in the white part of the screen as described by u and u can move on to the next step.. if not ill remain "serial". incase it remains serial then ull hv to downgrade ur drivers in vista os by drivers provided in the thread.
4. run uspl 2.5. U'll see 1.56.0000 change to 1.xx.uspl
5. Now run the HSPL wrapper u hv dnloaded..
6. phone reboots and ull see 1.56.olinex
if all works as described u can flash any 1.56 cooked rom without any difficulties..
feel free to ask ne ques that arise during the process
Click to expand...
Click to collapse
Thanks alot, I'll try this right away

hey there be sure u hv .net framework installed even before u try this out...

It worked!!
Thanks cvchetan, you really are my hero. Thanks thanks thanks thanks!!!
You don't know how glad I am right now, hehe.. Thanks again!! <3

well its nice tht u hv ur fone back nd workin..
cheers

I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!

AFW said:
I've also got the same problem.
I was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
When I start blac_uspl.exe (USPL 2.5), a window flashes for a split second and then nothing else happens.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Please help!
Click to expand...
Click to collapse
Im having the same problem as you. I hope i havent bricked the phone.

AdamsvillE, go to this thread.

[HELP] Strange screen issue

Good morning,
im opening a new thread because i didnt find an answer for my problem.
I got my Blackstone running with HSPL1.56+ olinex, 1.17 radio and using different roms like dutty or miri ones... so everthing works fine since I tried to flash the new dutty rom holy grail R2... after that my screen s displsaying the colours wrong like in 256colours graphic. some colours like green and purple are flickering...
I tried to change from HSPL to USPL but it wont help...moreover i flashed the USPL and flashed with 1.56 stock rom without success
dont know what to try
thanks in advance
zwon

Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?

or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem

afr33s said:
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
Click to expand...
Click to collapse
i think so too
hm on my pc its looking good...

gagi75 said:
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
Click to expand...
Click to collapse
i think not because i flash roms which i got working before
take out battery i tried a few times...last night my hd had no batt^^

i wos instal ok rom but each time when i do reset he goes off he wont start then i remove batery off then put back and start he goes up then when i see on screen smart mobilty is write tu soft reset and is ok all.i have thet problem and solwed...do what i do meybe help
sory for english

Update your hardspl to version 1.56

Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56

Fallen Spartan said:
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Click to expand...
Click to collapse
yes i tried... flashed the hspl 1.56+ before and using it with the equal spl version but wont fix my screen
i tried a many different solution but nothing would solve it

flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards

meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
sure? than sorry.. dont saw it
ill give it a try

meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
how to revert to stock spl?

ok find it by myself....would 1.54 be recommend or later? or could you even post the url where i find this in wiki??
dont find it

http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards

meska said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
Click to expand...
Click to collapse
so i tried this with all 3 kinds of stock spls...1.54 even too but it wont work
seems to me as it would be an other problem as the Greenscreen issue
yeah would be nice if you could help me with that tomorrow
ill add u in icq

X1 problem to hardSPL for newer SPL version 0.78.0000

X1 problem to hardSPL for newer SPL version 0.78.0000
Hi, I am ALi , sorry to bother, but just done some HardSPL on my X1,
last time the SPL ver was 0.78.0000
i read many of method to flash a newer ROM must HardSPL first their X1,
the problem is, I had already HardSPL it to SPL ver 0.72.0000, the process was a success
but
it stucked/bricked at tri-color mod, so i had it settled from
forum. xda-developers. com/showthread. php?t=455553 thread reported by MALIK,
i noticed that before down grading my X1, the ROM ver was UK_GEN_R3AA010,
but
after HardSPL to ver 0.72, i cant flash the original ROM UK_GEN_R3AA010 back, instead of that only ROM UK_GEN_R1AA017 are working with my current flashed SPL ver 0.72.
I tried to Hard SPL to 0.52 Olinex version (i didnt find any 0.72Olinex!! just 0.52 Olinex, where can i found the 0.72 ver of olinex?? does the 0.72Olinex really exist?? i am so much confiused now and really tired of trying to make it work in almost a week!!) so many time but fail, by USB, by SDcard (also try to replace my SD-HC4gb to Nokia SD 256Mb) neither of that method work!!
please help...
i am desprate to implement newer ROM on my X1 so called Kovsky....
please admin/engineers/developers help.... my head are getting bolder than b4 huhuhuuuuuu........
-ALi
Terengganu, Malaysia
p/s: i am uploading some of my pic shot while the problem persist right now to photobucket, but i am affraid that i didnt have any permission to attach th pic since i was a newbee....

The hardSPL 0.72Olinex can be found here (X1_HardSPL_v1.zip):
http://forum.xda-developers.com/showthread.php?t=431218
Also there is a detailed describtion on how to hardSPL your device:
http://forum.xda-developers.com/showthread.php?t=431218
For questions you can try the search button here, if you can't find any on this subject (which I doubt, because the question has been asked more than once in the thread) reply to the thread:
http://forum.xda-developers.com/showthread.php?t=431218
I've flashed my X1 with hardSPL and back to stock SPL a number of times, never without succes. From 0.720000 to 0.72Olinex to 0.720000 and from 0.780000 to 0.72Olinex.
So when you can't hardSPL from your pc there must be something wrong with the connection between pc and X1.
If you want a newer ROM with stock SPL, connect your phone with stock SPL 0.720000 to SEUS and SEUS will automatically update SPL to 0.780000. After that you can flash R3A ROM.
The other way through hardSPL and the manual download of R3A from PavelX1's sticky.

I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???

motok said:
I tried restore my software using SEUS but it says that I already have the lastes software (but I have ENERGY ROM 6.5)
the past version of SEUS had an option to flash again but the new one doesnt have.
CAN someone help ???
Click to expand...
Click to collapse
Download you stock ROM from PavelX1's sticky thread and flash it...

Tnx you saved me from hours of searching

Hi Lokhato,....
thankx for the advice,... if ou wont tell me about the SEUS, sure my X1 i declared it DEAD!!! I was accidently HardSPL it to 0.72.0000 i think...., because of i tried so many times to HardSPL the OLinexSPL to my X1 but it aint workin. but then when i replace the RUU_signed.nbh that got version 0.72.0000stockSPL it worked AND THEN it STUCKED at the boot screen says that please wait, continue to upgrade ROM.... damn i resolved it...
so my step on recover to the latest stock SPL 0.78.00 are like this,...
1. download the SEUS from XPERIA website.
2. try to READ and FOLLOW the instruction stepbystep. even whenever the application ask you to restart the PC/LAPTOP, please make it done so....
3. whenever SEUS asked u to enter the bootscreen, MAKE SURE you take out the SD out from your phone. and let the SEUS flash the OriSPLver 0.78.0000
4. then it blinks several times after the progress bar finished, and it also stucked at bootscreen saying to continue updating ROM.
5. in this situation, please flash back your ROM with ROM UK_GEN_R3AA010 not the R1 or R2 ROM. so to manually flash the R3 ROM, copy the R3 image file to your freshed format SD and named it kovsimg.nbh
6. so put the SD in X1 and soft reset the X1 by pressing the reset button with your stylus at the back panel of X1.
7. let it load the image whenever it enter the boot screen again
8. press the power button to confirm upgrade ROM.
9. it should state there SUCCESS!! and you must HARD-RESET the X1.
9. waitt...... and wait...... be very patient, take a break... let it run.....
10. you are DONE!!
enjoy your original flashed ROM,...
if you not like it,
from this point you can just simply HardSPL it to 0.72Olinex by downloading the X1_HardSPL_v1.zip
then go get another ROM and repeat step 5.
as my observation...
SPL 0.72.0000 can flash img from R1,
R2 I dunno can flash or not, never try it...
SPL 0.78.0000 can flash img from R3
HardSPL it to OLinex ver 0.72OLinex ver, then you r good to go to flash any ROM you like!!
damn what a hard week!!! at last i got it to flash the HardSPL on my X1
last but not least.... just want you all to know that i was doing those step above from my mom's laptop current spec was CentrinoDuo, mine that always hanging whenever try to flash any SPL was on SempronAMD Laptop + always BlueScreen error even after i freshed repair my .NetFramework ver3.5sp1. so if you facing any problem on SPL our X1, try to done the upgrading on another PC/laptop, i believe that Intel based processor was more stable than AMD i think...

Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?

Lokatho said:
Don't know if you can use the SD-card flash method when on stock SPL.
A couple of things to know:
0.720000 is stock SPL
0.780000 is an updated stock SPL
0.72Olinex is hardSPL
Did you try to flash with CustomRUU instead of sdcard? I attached it to this post, just unpack and place the ROM you want to flash in the same folder. You can find the ROMs in PavelX1's sticky.
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
but
- last time my original 0.78.0000 cant do HardSPL
- after accidently flash the 0.72.0000 by using RUU but at the same time i copy the stock0.72 SPL to RUU folder,,,... or my mistaken to copy to SD also by renaming it to kovsimg.nbh i think, just cant remember at that time, and still cant HardSPL + hangging somemore....
- after SEUS updates to newer stock SPL 0.78.0000 like before it was very easy to HardSPL with 0.72OLinex..... wonder y.....
hmmm... CustomRUU??... i think if i try that method would always get the ERROR code rather then success huhuhuuu....
for now i just stick to flashing ROM using Nokia SD 256Mb if the img can fit it in....
thank you so much anyway bro...
u da man!!!!

Lokatho said:
Don't know if you can use the SD-card flash
What does your bootloader say now? And you can't boot your phone?
Click to expand...
Click to collapse
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi

Several roms do have panel manager installed so there is a use for the X Button
in case it is not cooked in you can add it manually. Also XMapper is available for alternative uses of the button...
Finally, if Silent_UC is supported by the rom you can bulk install many apps, registry edits, etc. after flashing the rom or afterwards. Just search...

putrabiru said:
sorry i miss out to answer this...
my bootloader shows SPL-0.72 Olinex
already flash some of software img like firestorm... nrg... but still cant suit me, now just flash back to it original state WM6.1.....
you got any suggestion about the best,smooth,cool&light ROM for me??
another thing i noticed that, the ROM that been cooked doesnt seems have Xpanel.cab installed, so that our X button panel will be useless, or did i miss something? huhuhuuuu
-ALi
Click to expand...
Click to collapse
hardSPL can be done without a problem from 0.780000. I did it several times after I brought it to repairs.
In post #5 in the EnergyROM thread you can find a link on how to install the panelmanager, from R3A and X2. This works with all roms which don't have the panelmanager installed.

Mod. edit: not dev related, moved to general

I am very happy now! Just managed to update my SE X1 after SEUS 0.78!. As others suggested downloaded R3AA010 (APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010), but used NBHUtil to extract ROM. That was a mistake! I simply renamed R3AA010 to Kovsimg and put it in my SD 2 Gb card. Ufff, after 2 weeks of endless reading the forums and thying this and that... Finally!!!!