Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
What kind of Rom did you try to flash ?
Read this, maybe this wil help for you
Good Luck
MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
well friend check ur spl version..
if the rom u want flash is 1.56 based and ur spl is lower than 1.56 then such problems shall occur..
Try to use hspl 1.56 to update ur spl first (use the cracked HSPL i.e hspl 1.56 olinex) and then flash the rom..
This should do the trick..
if it still does not work get back and we'll help u..
MihaiGSM said:
Hy! First of all, i followed the instructions from here
http://forum.xda-developers.com/showthread.php?t=431217 because i wanted to change the language.
It worked, but after rom updater finished, my HD is booting, i can hear the power on sound, but nothing on screen. After thid, i tried to to execute uspl 2.5. It worked, no error, flashed again the rom, but still no success.
Can you give me an advice? Shall i use a Custom RUU?
Click to expand...
Click to collapse
What rom did you flash to your device after flashing HSPL? Or did you only flash HSPL?
Related
so i was trying to revert back to the stock SPL, and i downloaded Restore-SPL-1.15, and i opened it up and renamed the file to BLACIMG and placed it on the storage card and flashed it and now, the phone loads in bootloader mode and says error and is stuck on the loading... screen i think i really ****ed myself over... can any of you guys give me some advice on what to do?
As far as I know, you must flash stock ROM before going back to the stock SPL. Your problem is probably caused by having stock SPL with non-stock ROM.
Somebody with more experience might offer a better solution, but I would suggest you to read about USPL, I believe USPL is the cure for your problem, read about the details.
So have you successfully flashed the stock SPL? If so, try flashing a stock rom now, use the SD card method (blacimg in root storage card + hold vol up/down and power), if this works then its what vizier said, you can not run a non-stock rom on a stock SPL (without USPL). But then you will be able to continue flashing .
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
itzjonjon69 said:
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
Click to expand...
Click to collapse
Haha good good... I was about to tell you to read the guide in my signature... but I am glad you got it fixed bud!
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
RUUNBH
BLAC100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
reyber said:
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
blac100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
cRaCKwHoRe said:
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
Click to expand...
Click to collapse
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
reyber said:
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
Click to expand...
Click to collapse
It's actually quite hard to flash a rom from the SD card when using SPL... you have to remove and insert the SD card at appropriate times... I would recommend doing it over USB as also suggested by many others.
Have you tried loading said rom over USB when phone is in bootloader and USPL is loaded?
it worked like a charm
i want to thank you very much for your effort
reyber said:
it worked like a charm
i want to thank you very much for your effort
Click to expand...
Click to collapse
Awesome, glad to hear!
Morning all,
I think I've done the same thing. I have stock SPL and a non-stock ROM... I'm on SPL 1.14... I'm a bit stuck because nothing will seem to load on to via USB...
I tried running "RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe", but the phone simply reboots to the bootloader, the bottom text changes to 'USB', but it goes no further. It eventually shows Error 262 (comms error).
Any ideas?
Thanks!
------
EDIT: Managed to resolve this by using USPL to put back HardSPL by OliNex
Hi,
I've just upgraded to a new Dutch rom, but since then I only have trouble.
I get different colours (like drivers are not loaded), it keeps getting stuck or resets itself, and nothing helps.
I've tried to put on a different rom, with succes, but I still have the same problems.
On startup, however, I see the right colours.
I also put back the latest original ROM, but no luck...
Can anybody help me?
guessing you have hspl 1.14 installed
Yeah, I reinstalled that, as one of the latest things I did.
The problem you describe happens when you flash a 1.56 based rom with 1.14 HSPL. First flash a stock 1.56 ROM (a new SPL is then flashed as well) or use the new HSPL. Then you should be fine. So no, it's nor corrupt!
For more info, read crackwhore's guide (sticky)
Well, I'm trying to do so now, but it keeps getting stuck at 0%...
Does it matter I have an NLD-version, and not a WWE?
Update: I cannot get a proper connection via activesync, and through the bootloader it stays at 0%, and after a while the update utility says no.
Update 2: ah, thanks to troubleshooting, it looks fine!
THANKS!
Hi!
Today I've decided, after many reads to update my HTC Touch HD to a cooked ROM.
So I've followed this procedure and all was ok:
http://forum.xda-developers.com/showpost.php?p=3625567&postcount=272
I choosed the EnergyRom Leo Standard M2.5.
So first thing, my screen is blue since the start, but it became ok if I just turn off and up the screen.
Second problem, after 1-2 minute of use, the screen doesn't respond anymore.
I said ok, and I tried another rom, the XannyTechROM Grid Leo, and same problems! What is wrong?
Can you help me?
Thank you!
Your problem is classic for not having the correct SPL. You need to flash 1.56 or greater. Please refer to this thread: http://forum.xda-developers.com/showthread.php?t=505377, and in the future post all questions there. Good luck!
S3
Sean3 said:
Your problem is classic for not having the correct SPL. You need to flash 1.56 or greater. Please refer to this thread: http://forum.xda-developers.com/showthread.php?t=505377, and in the future post all questions there. Good luck!
S3
Click to expand...
Click to collapse
Okay, so if I understand good, I must use HSPL instead of USPL?
You can also flash an official ROM with 1.56SPL and use USPL.
If I want to update to one in french, I absolutely need to use this one:
RUU_BlackStone_HTC_FRA_1.56.406.1_Radio_52.62.25.34_1.13.25.24_Ship.exe?
Because the download is very slow :S
I just finish to download and install the previous ROM, but it's written now SPL-1.54 in the boot loader, will it be enough?
Nargzul said:
I just finish to download and install the previous ROM, but it's written now SPL-1.54 in the boot loader, will it be enough?
Click to expand...
Click to collapse
Before flashing any rom based on 1.56+ you need to have either SPL 1.56.Olinex (using HSPL) or SPL v 1.15.USPL (Using USPL)
All this info can be found in dummies guide thread. No need for another.
Thread closed
Good morning,
im opening a new thread because i didnt find an answer for my problem.
I got my Blackstone running with HSPL1.56+ olinex, 1.17 radio and using different roms like dutty or miri ones... so everthing works fine since I tried to flash the new dutty rom holy grail R2... after that my screen s displsaying the colours wrong like in 256colours graphic. some colours like green and purple are flickering...
I tried to change from HSPL to USPL but it wont help...moreover i flashed the USPL and flashed with 1.56 stock rom without success
dont know what to try
thanks in advance
zwon
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
afr33s said:
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
Click to expand...
Click to collapse
i think so too
hm on my pc its looking good...
gagi75 said:
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
Click to expand...
Click to collapse
i think not because i flash roms which i got working before
take out battery i tried a few times...last night my hd had no batt^^
i wos instal ok rom but each time when i do reset he goes off he wont start then i remove batery off then put back and start he goes up then when i see on screen smart mobilty is write tu soft reset and is ok all.i have thet problem and solwed...do what i do meybe help
sory for english
Update your hardspl to version 1.56
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Fallen Spartan said:
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Click to expand...
Click to collapse
yes i tried... flashed the hspl 1.56+ before and using it with the equal spl version but wont fix my screen
i tried a many different solution but nothing would solve it
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
sure? than sorry.. dont saw it
ill give it a try
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
how to revert to stock spl?
ok find it by myself....would 1.54 be recommend or later? or could you even post the url where i find this in wiki??
dont find it
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
meska said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
Click to expand...
Click to collapse
so i tried this with all 3 kinds of stock spls...1.54 even too but it wont work
seems to me as it would be an other problem as the Greenscreen issue
yeah would be nice if you could help me with that tomorrow
ill add u in icq
Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.
You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.
I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error
The instructions say to flash the stock ROM before you re-lock SPL.
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go
Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...
Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...
Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!
Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there
:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540
The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.
Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved
You are right. Thanks again
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.