Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.
You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.
I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error
The instructions say to flash the stock ROM before you re-lock SPL.
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go
Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...
Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...
Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!
Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there
:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540
The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.
Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved
You are right. Thanks again
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.
Related
Hi, After the soft reset comand, I removed the battery from my Wizard. After that the followin problem was appear: the phone is bringing up to the splash screen and STOP on this position.I have tried to download another Rom but the problem still is the same. My Phone is not CID unlock and before this, I cooked own rom like is writen here http://forum.xda-developers.com/showthread.php?t=271043 . So any idea how to wake-up my phone MDA Vario.
Ok forgive me if I'm wrong here, I don't really want to judge before I know the full story, but seems to me your brain went on strike momentarily. First rule of flashing any unofficial rom CID UNLOCK YOUR DEVICE. Anyways sorry, I just wanted to say something so it doesn't happen to you again, that said, what rom did you try to upgrade to? what rom did you try to downgrade to after that? is your device a G3 or G4?
If your device is a G3 I would recommend downgrading to this rom by xelecin
ftp://xda:[email protected]_RUU_Wizard_1081002_108_10910_ENG_US.exe
it will ask you if you want to CID unlock your device at the start so you shouldn't need to worry about forgetting this time , if you can't connect your device to activesync just go into the bootloader (hold the camera, voice dial buttons while pressing the reset button) and once it connects run the set-up.
Oh another thing before I forget..... do some searching and read up a bit, because this is a pretty common topic on this forum, best of luck and hope everything works out ok. If not, report back.
*edit* I just noticed the thread that you linked to, I actually wasn't aware that this was possible, but anyways I think it's still much safer to CID unlock your device if possible, and another thing you might try replying in that thread if it doesn't work out since they should be more knowledgeable in the matter..... and that would help keep the forums less cluttered *edit*
Thanks, for your help, Unfortunately you are totaly right for my stupid act (again). At first i tried to solve the problem alone , but whole day I roam through this forum to find solution but I can't find the same problem like my. Maybe because of my ..... brain .Anyway I am with G3. NOW I have
IPL 1.0
SPL 2.26
GSM 01.09.11
OS 1.5.4.2
This is after this procedure http://forum.xda-developers.com/showthread.php?t=263116
I tried also to download also and Molski's 2.26.10.2 AKU2.3 Rom a.k.a. 2.26.10.2 Final Edition Rom, but the problem is the same : The splash screen is running and STOP and.... nothing.
I can go to bootloader and can download new rom, but I can't start fhe phone.
Yeah I know these forums aren't the easiest in which to look for info. So you can go into the bootloader, that's good. Don't try to go to a AKU2.x rom or later, keep it under that, so no 2.26 roms at all. 105, or 108 roms should be good.
Did you try the rom from the link I provided or the one on the thread? and afterwards did it go into the phone at all? My friends MDA had a similar problem last week, caused by the same thing, though in your case I see the SPL isn't updating when you install new roms on his it was the os that wasn't updating, but as soon as I installed that rom I recommended it booted up fine, then I updated his device to molski's 2.3.
I'll check back in a few so let me know how's it going.
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
DoCtOr_X said:
Here's what you need to know & if you follow these instructions your prob will be solved.
The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
http://forum.xda-developers.com/showthread.php?t=285435
Wish u best of luck.
Click to expand...
Click to collapse
Ok, but tell me how to solve this :
"qiote"
8. Open ActiveSync, Explore and copy enablerapi.cab from your PC's C:\ (remember that's where you extracted lokiwiz to...) to you device, I don't care where.
9. Pick up your PDA, File Explorer, find the enablerapi.cab and click it.
"quote"
I don't have access to the phone explorer and phone at all.
masr1979 I have tried the rom you give me, but it look like there is some things I don't understand: When I start the exe file i have choice <continue> .Whet I type <c> 2(two) time the soft tell me <no device found> and order me to continue with copy ???. After few seconds tell me that Unlocker ..... Done!, and start HTC wizard Unlocker and NOTHING !!! Stop on this position more then 15 min. and only the led for charging on the phone is active.
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
masr1979 said:
Can you remember your phones old ipl/spl? for your sake I hope it wasn't something in this format 2.XX.000X.
Click to expand...
Click to collapse
Of course I'm not sure, but I thing it was 2.21. Anyway did you think that is posible to cook my own rom in G4? I'm totally confused.
Every time when I upload new rom I have this:
http://forum.xda-developers.com/attachment.php?attachmentid=32884&stc=1&d=1168184491
IMG_2976.jpg
...and also this is my bootloader screen
http://forum.xda-developers.com/attachment.php?attachmentid=32885&stc=1&d=1168184491
IMG_2977.jpg
Dr Puttingham said:
Forget all about unlocking. Until you can boot the device completely it'll never work.
Try and install an official 2.x ROM on your device.
My suspicion is that you originally has a G4 device, which is bad because if you DID have a G4 you have a brick now...
Click to expand...
Click to collapse
Thanks, but I try to find oficial rom but without success. And very interesting thing I found.. when I start to upload new rom the soft start to check my old rom and after that tell me that i have GE (german) language, but my old was WWE ?
Is it posible some one to give me some link to official 2.x ROM but for T-mobile german language.
Well the other day I tried finding that german rom for a while.... that search was going nowhere, I saw this thread, I don't know if you might want to check into it and maybe try it out. There's mixed results apparently but who knows
http://forum.xda-developers.com/showthread.php?t=276963
hello guys...i've been trying to upgrade to this Romeo's rom....but seems there's a problem with it...after i copy n run the jump spl, the screen become tri color...n i waited for the "usb" words to appear in the middle of the screen,but it didn't appear....and because of this i've been stuck at these steps for few days...i hav searched at the wiki's, but couldnt find about this probl..help pls guys...thanks in advvnce,,
okay..think i find the way now..searchd again at the wiki...n the suggestion was to reflash the original rom...think this is my original rom "1.81.707.0 (radio 1.27.12.11) Dopod WWE "...the question is...the rom version and the radio version is different here....the rom vers is exactly the same wit my rom...but the radio is different....should i just proceed or not?
What version of JumpSPL are you using? Mine, and a couple of other's as well, didn't show the "USB" with version 1.93. Try version 1.56 and it should work.
Please tell me that you are not trying to flash a ROM using JumpSPL...
i've been told to use this "JumpSPL1.93-KAIS" in order to use the "@ROMEOS_v3_5"...i just follow the steps given to me...
Connect Kaiser to computer using USB cable
Make sure ActiveSync icon is GREEN
RUN kaiser-HardSPL.exe on Computer (PC)
Follow instructions on screen:
Click to expand...
Click to collapse
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.
ChumleyEX said:
Wonder if someone told him to cid-unlock first..
The wiki/sticky would have.
Click to expand...
Click to collapse
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.
NotATreoFan said:
That's why I went with an open-ended statement/question. His original post states he checked the Wiki, but I saw no mention of HardSPL.
Click to expand...
Click to collapse
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?
giggsy_lel said:
i checked wiki because the instruction given to me went wrong...i downloaded this romeo v3.5 and comes together with jumpspl and hardspl as well...the instruction ask me run the jumpspl before running evrything else....so here,u guys saying that i should straight away run the hard spl is it?
Click to expand...
Click to collapse
JumpSPL
HardSPL
ROMeOS
in that order...
Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!
pyraxiate said:
Ok, so I know I have posted this before....and have seen it posted in about 100 other places ( not to mention the ROM UPGRADING thread right on the front page of the WIKI ). JUMPSPL is ONLY used to flash your current locked spl into a HARDSPL.
Step 1
Run JumpSPL on the phone
Step 2
Flash HARDSPL onto the phone
Step 3
Using HARDSPL, Flash your ROM and/or RADIO
NEVER NEVER NEVER DEVIATE FROM THIS!!!!!
Click to expand...
Click to collapse
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?
giggsy_lel said:
yeapp...this the order i followed..after i run the jumspl,the tricolor thing appeard...and the sync stopped..and it didn't reconnect,i tried to run the hardspl n follow the steps..but it appears no connection with device...when i checked the wiki about stuck at tricolor...they ask to flash back the shipped rom again..found that rom but in different radio vers with mine....is it ok to just run the original rom again?
Click to expand...
Click to collapse
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave
DaveShaw said:
In answer to your Question, Yes.
Read the instructions of Post #2 very carefully of this thread to install Hard SPL: http://forum.xda-developers.com/showthread.php?t=396922.
Then flash the ROM.
Ta
Dave
Click to expand...
Click to collapse
okayyy bosss....i think this might help...gonna try now..
finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??
giggsy_lel said:
finallyy...i got it man...thankss alot devshaw...i found that u must take out the sdcard n simcard in order to proceed the steps...now i'm gonna test some roms here...hey devshaw which rom u think best?for me i prefer roms having nice interfaces....seems dutty n L26 are more in interfaces...their design is gorgeus....since this is the first time flashing the rom i don't know which to choose...i've been told to use romeos by hang.tuah,since he's same country from me...i just give it a shot...any recommends??
Click to expand...
Click to collapse
For a nice UI try the [27-08-08] L26 KaiserDiamond Throttle Launcher (Beta 6 released!). ROMeOS is fast and stable though, best way to find out is to try them.
Ta
Dave
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
USPL and HSPL do this for you so you are able to flash a rom or radio. Read this page from wiki. It'll help you understand
Follow cRaCKwHoRe's guide on how to flash (can be found in my signature). If you intend to do a lot of flashing I'd flash HSPL as its permanent whilst USPL is temporary and you'd need to re-use it before every flash to new rom or radio
Latest HSPL can also be found in my signature
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
futurama said:
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
Click to expand...
Click to collapse
Flashing from one HTC stock rom to another you don't need to use USPL or HSPL. But going to a cooked rom you do.
Answer to your query is it depends on route you take. If you go down the USPL route you'll need to follow cRaCKwHoRe's guide. Would take to long to explain and he as already done a very good tutorial on the subject. If you go down HSPL route, all you need to do is flash latest HSPL then 1.56 rom
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
futurama said:
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
Click to expand...
Click to collapse
I'm currently testing Dutty's V3.4. His V3.3 is already released but I'd wait for the new release hopefully in a few days. Both are based on WM6.1. Alternatively their is so many good roms out there. I'd also recommend Davideuck, EnergyROM & L26_THDV2.2 (Laurentius26). All very good roms by very good cooks. Best thing would be to try each of them and make your own opinion
thanks again mate, you are a legend, Ill post tonight to let you know how it went.
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM?
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
davemazo said:
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
Click to expand...
Click to collapse
There are a few forms of unlocking but the bottom line is that you need to bypass the checking which is done in the flash process.
One way is permanat as done once no issues anymore - HSPL
Another is as and when you need - USPL.
Wiki has a walk through that needs to be upated but I thought still was useable.
Flash the new 1.56 shipped rom and then move on to cooked roms. (will help you by pass the greenscreen issue)
futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
futurama said:
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
Click to expand...
Click to collapse
Sorry to hijack your thread futurama but I am having the same problem. Could you let me know how you did it
Thanks HDuser. Not sure if you know where I`m up to but originally I flashed my Orange 1.19.61.1 ROM with USPL and then flashed Duttys 2.7 1.56 based ROM which has given me the green screen problem. An earlier poster suggested I flash Olinex HSPL 1.54 to cure the problem. The problem I am having now is the phone refuses to sync with the PC. I have tried Vista and XP, the PC does not hibernate or sleep or anything, the phone is set to not switch off. It will usually sync on first connection but after a few seconds it will disconnect and therefore HSPL is reporting as being disconnected.
I have tried the earlier HSPL and HSPL 1.56 (as the ROM in bootloader screen is reported as being 1.56 and SPL is 1.14). I feel I`m going round in circles and its only a matter of time before I brick the phone.
I have read and re-read the wikis but I am now just getting more and more confused.
davemazo
Look the best way to approach any problem is to go back to the roots.
Flash a stock rom, find your own stock rom and refalsh it, then take it from there.
Your post is missleading and I have no idea were to sart. One issue is your PC ist does not Hibanate, not or go into sleep mode, at the saem time you are saying that you can't sync. Sounds like you have other problems and those other problems are making you have problems with your device.
Thanks HDuser. Sorry for confusing you, but I am now totally confused myself, Basically though the phone does not sync with the PC, I have tried 2 PC`s, with Vista and XP.
But back to your point about flashing stock ROM, I have tried a link in the wiki to download the one I need which is Orange 1.19.61.1 but the link seems to be broken and I don`t know where else I can get it. It doesn`t seem to be on the Orange website or HTC.
HDuser said:
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
Click to expand...
Click to collapse
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
futurama said:
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
Click to expand...
Click to collapse
It sounds as if you have it sorted now and everything working. As HDUser stated previously HSPL & USPL allows you to bypass the CID lock to enable you to flash new roms
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
futurama said:
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
Click to expand...
Click to collapse
Of course you can. All information you need including original stock radio's, roms etc are available in wiki to download.
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
You can restore original SPL and rom without having to get into phone with cabs.
As long as you can enter bootloader screen you can restore stock SPL.
I came across this "step for step" process via a search. I have not tried it yet (and hopefully never have to -
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package (ie the original SPL).
2. also download the original hardspl from the attachments in this post. (I presume you already have this?)
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing. (You can probably skip this step)
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000.
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
As I said, I have not tried this. If this does not work, search on this site or Google for additional info. Hope it helps.
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
longnguyen30 said:
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
Click to expand...
Click to collapse
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
ClydeB1 said:
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
Click to expand...
Click to collapse
note that; if you restore stock SPL 114 or 115 please download the same rom version for flashing.
ex: when you restore SPL 114 you must have ship Rom:http://rs68l32.rapidshare.com/files....479.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
because the different SPL & Rom version will make wrong screen.
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
mcowly said:
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
Click to expand...
Click to collapse
firstly you must Hard SPL 1.56 Olinex
secondly flashing your rom
And restore with SPL 1.13 I assume?
mcowly said:
And restore with SPL 1.13 I assume?
Click to expand...
Click to collapse
The process of restoring stock rom/SPL is only to be used if you plan to return device. If you are wanting to keep you you mentioned earlier then you would need to put either USPL or HSPL on your device first. I would recommend USPL for you as it would be easier to return to stock SPL afterwards.
Once you have rom on your device, DO NOT restore stock SPL afterwards. You only restore this if you plan to return your device. If you did you would have to go through whole process of putting USPL or HSPL onto your device again to flash another rom.
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
mcowly said:
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
Click to expand...
Click to collapse
No probs. Out of curiosity what screen problems do you have? Are they Hardware problems or is it something else which could possibly be fixed through the assistance of xda users
It's the phone of my brother, he tells me that the screen doesn't respond anymore, so he can't get past the calibration!
I'll give an update when HTC fixed this (or replaced it )
Thanks for all the help!
I'm doing this right now. I had been using Dutty's V6 before. I never updated the radio, so Ishouldn't have to change it, right?
Anyway, I flashed the stock RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe rom, and that went fine. I'm trying to flash the stock 1.13 spl, and I get error 202: connection. It thinks it can't see my phone, even though it does the initial connection, and even sees what version (1.56) of the spl is on there. Any ideas?
Ok, I did this: I put the phone into bootloader manually by pressing up when it boots up to get to the tricolor screen. That let me run the 1.13 spl pdate, and it said it completed successfully. However, when it boots ups, it still shows D:1.56 olinex or whatever. Did it not work?
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
scythe000 said:
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
Click to expand...
Click to collapse
If your SPL says 1.13.0000 then you are fine to send phone in for service.
R1.13.25.24 - Radio Version
G52.62.25.34u - Protocol Version
D1.56.00.00 - ROM Version
All queries answered
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Was restoring the stockspl succesfull?
What info do you get in bootloader?
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse
"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.
orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!
Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Have you tried to flash your rom through the boot loader mode
try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is
haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.
thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.
I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.
Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.
@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.
Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.
replied to PM
cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...