Database Develop

What exactly is hardSPL? USPL vs hardSPL

I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks

Essentially what you are doing is changing the Bootloader so you can install a different ROM regardless if it's signed.
USPL and HardSPL is a matter of having it done temporarely or permenantly.
USPL (temporary), is the safe route. This will allow you to Install one USPL capable ROMs per USPL. So if you're not a big flasher, and thinking about selling your phone in the near future, then you might want to stick to this method.
HardSPL (permenant), is the only TRUE way of bricking your phone. You will flash the bootloader for good so that you can constantly flash new ROMs without having to worry about flashing your bootloader of making sure it's a signed ROM. For heavy flashers, like myself, this is the ideal route.
HardSPL is reversible, there are some threads on how to do that. If I remember correctly, you have to flash back to a Stock T-Mo ROM.
Some ROMs require HardSPL because sometimes the cooks use different methods to flash ROMs onto devices other than ActiveSync (which is needed for flashing via USPL).
For example, ttran001's Open Touch V4.0 Micro ROM flashes onto your device using your SDCard, the phone is never connected to you PC so no opertunity to USPL. If it was not HardSPL'd, the ROM would be rejected. If it was, the flash would continue flawlessly.
I hope this answers your questions, and please, if I got anything wrong, correct me.
Regards,

three4seven said:
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Oh and from what I understand, installing those cabs wont hurt your device if you dont HardSPL. I believe you can uninstall them from the "remove program" which can be found under Settings/System/Remove Programs.
Everyone's allowed a Noob question every now and then I only know all this info because I read, so im sure if you read u'll be just fine.

nKiwan, thanks for quick and throrough reply
I get a little lost with this:
nKiwan said:
This will allow you to Install one USPL capable ROMs per USPL.
Click to expand...
Click to collapse
what does that mean exactly?
perhaps I should start by asking the USPL acronym stands for - I've googled it and I couldn't find the right acronym.
From my understanding.. the only real difference (besides one uspl rom per uspl vs infinite - i'm still a little hazy on that) is that hardSPL allows for flashing outside of activesync?
thanks again... I swear I tried my best using the search function and reading

Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device. This will temporarely change your bootloader so it will allow you to flash a non signed ROM, a.k.a. an "outside" ROM. USPL capable ROMs, are ROMs that you can flash using USPL, therefore, ActiveSync.
Well there are two differences I guess... HardSPL, basically, allows for flashing outside of ActiveSync; and will allow you to flash any ROM as many times as you would like, once HardSPL'd.
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .

nKiwan said:
Well, correct me if i'm wrong, if you do not HardSPL, then you must USPL your device everytime you wish to flash your device.
hardSPL.... will allow you to flash any ROM as many times as you would like, once HardSPL'd.
Click to expand...
Click to collapse
Technically then.. I could also flash any rom as many times as I want using USPL as long as I run USPL.exe? I read the flashing guide several times. The only difference I found was that you run USPL.exe and it goes through a loader instead of just running the RUU flaser. Is that right?
i apologize once again if I am being incredibly dense.
thanks again for putting up with my n00bness

there ya go! you got it. As you become more experienced you'll start to understand the need of HardSPL.
I was once a noob myself, so i understand where u coming from . Just glad I can help.
Regards,

nkiwan - thank you so much for answering my barrage of n00b questions.
You have been a great help. I really appreciate it.

Wow I think this is the coolest thread I have read ...it is just awesome what the WWW has done for all of us and thanks for the info

Glad I can help

I can understnad the use of USPL but I would recommend the use of hard SPL if you are planning to flash multiple roms. Either way I think it is just a matter of whether or not you actually want to run the USPL everytime you want to flash a rom... Don't quote me on that.

Just to doublecheck myself....
If I use USPL method and hard reset my phone - will I have the stock rom or the flashed one?
if I understand correctly USPL will bring back the stock one after hard reset and HSPL the new one.

very sorry to ask this now..from what i get is there are 3 ways of turning ur phone from phone to super phone:
1. install .cabs
2.soft flashing
3.hard flashing???
am i rite??

nKiwan said:
As far as the acronym goes, I have NO clue lol. Never bothered to find out, I guess it would be helpful to know .
Click to expand...
Click to collapse
I found this thread that you might find useful for the acronyms:xdasite.com/showthread.php?t=1104

Same was with me.....
three4seven said:
I apologize in advance if my questions are trivial and I am just dense.
I am pretty sure I've read through all the threads for "n00bs" but I still can't get a grasp of what exactly hardSPL does or is. I ran the search function and found that I don't NEED it per say and has claimed that it actually is "safer" to use USPL.
I own a Tmobile Wing (IPL > 4.xxx)
1. What exactly is the difference between USPL and hardSPL?
2. What are the limitations of either one.. will flashing a cooked rom without hardSPL cause problems?
3. I currently have flashed the newest Open Touch 4.0 and haven't had any problems at all (USPL), but I noticed in the thread for Touch-IT, it says that hardSPL is required. What does that mean exactly? If I flashed it w/o hardSPL.. will my wing crash/brick?
4. At some point, I'd like to sell the phone, so I don't want to do anything that is irreversible. My understanding was USPL is reversible, hardSPL is not?
5. I was on the verge of flashing the hardSPL but chickened out.
I installed the three cab files (canonyang.cab aserpolicy.cab disablesecurity.cab) but decided I wasn't ready to flash.
Will that cause any problems (installing the .cabs but not flashing)?
any help/input would be greatly appreciated. Sorry for all the n00b questions. Thanks
Click to expand...
Click to collapse
Hi Brother,
Same problem with me i have also search every where but failed... no answer about Hard spl.Every body say do hard spl and search in fourm and so on. There was no proper guide what it is and how to do. i was really puzzel. Now i have come to know that axect what it is Hard Spl.
Hard Spl mean CID unlock. If you unlock CId of the phone its mean you have done Hard SPl. Without CID unlock you can not write ROM.
Thanks
Br Raja

I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?

Stargazer418 said:
I have a T-Mobile Wing. I hardSPL'd it, installed a custom ROM, then I used the RUU to flash the original ROM back to it. It doesn't show the CanonYang startup screen, but the SPL version is still 4.70.Yang. Is it still HardSPL'd?
Click to expand...
Click to collapse
You can always check in the bootloader screen (the RGB screen).
Even if you have a 4.70.Yang you still need the IPL to be higher than 4 to flash custom ROMs. That is what is important.
If you ever see any of these number's change, Run the HardSPL folder again.

Did i brick it ?

OK i think i ****ed up bigtime.
I was on HSPL, and at first i flashed a stock rom.
After that i flashed DUtty's rom and it went ok.
It booted up with green screen problem and loads of locks and really really slow. After that i tried to use uspl but i was getting connection problems. After that i thought i should go to 1.15 stock spl and so i flashed that one, in order to use uspl. But the problems still persist, and now i cant revert back to a previous cooked rom.
Any suggestions ?

Use Manually Bootloader
Go back to stock spl, first flash stock rom, use sspl manual turn olinex and flash stock spl and then u can hspl again.
Hope it solves the prob. Just take a look at my Grafik Problem thread!
By

Well i fixed it and flashed everything ok.
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.

sedde said:
Well i fixed it and flashed everything ok.
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.
Click to expand...
Click to collapse
Hi,
Why, Windows 7 has the same drivers like Vista???
Can You express more crearly?

i flashed on Win 7 (build 7077)... i had to roll back the HTC USB Sync driver as explained in many threads about flashing the latest HD ROM v 1.56. i think some of our fellow members are not following all the steps to flash with the new ROM/SPL.

sedde said:
A message to all flashers, DO NOT TRY TO FLASH ON WINDOWS 7. You may brick your device.
Click to expand...
Click to collapse
A message to all flashers:
Read the instructions thorougly. If you cannot say that you understand 100 % of what the instructions tells you, read them again or do some research.
After following these steps you will almost certainly have a much better experience with custom ROMs.
-KJ

i tried reverting the drivers but it is simply not working. i am thorough and i do read the details.

I had no problems with the drivers. I just followed the correct procedures mentioned in the wiki and post#6 of Duttys v2.8 rom
Have you tried rebooting pc afterwards and pressing F8 as per the instructions to help load them?

i flash on windows 7 7068 almost 10+ times already with no issue , using custom ruu.

simranjits said:
i flash on windows 7 7068 almost 10+ times already with no issue , using custom ruu.
Click to expand...
Click to collapse
Same here. Use Windows 7 (7068) as my only OS and I've been flashing 20+ roms without any problems.

fjevel said:
A message to all flashers:
Read the instructions thorougly. If you cannot say that you understand 100 % of what the instructions tells you, read them again or do some research.
After following these steps you will almost certainly have a much better experience with custom ROMs.
-KJ
Click to expand...
Click to collapse
The instructions for all the different flashing methods are a big mess if you ask me.
There is no red thread, they all just blend together in a big mess and leave out answeres to simple questions that would clearify stuff for newbies.
The more i read the long pages of instructions the more confused i get.

nizzon said:
The instructions for all the different flashing methods are a big mess if you ask me.
There is no red thread, they all just blend together in a big mess and leave out answeres to simple questions that would clearify stuff for newbies.
The more i read the long pages of instructions the more confused i get.
Click to expand...
Click to collapse
I agree, they can be confusing, but once you have mastered it, you'll wonder what the problem was!
What exactly are you confused with? What steps have you taken? Where are you now in the process?

Don't worry about the phone it will be ok.
The steps are as follow:
1). Flash hardspl
2). Flash a stockrom
3). Flash USPL 2.5
4). With USPL on your phone flash to Dutty
To revert back to previous roms:
1). Flash hardspl
2). Flash your previous rom.
Grtz,
Leo
sedde said:
OK i think i ****ed up bigtime.
I was on HSPL, and at first i flashed a stock rom.
After that i flashed DUtty's rom and it went ok.
It booted up with green screen problem and loads of locks and really really slow. After that i tried to use uspl but i was getting connection problems. After that i thought i should go to 1.15 stock spl and so i flashed that one, in order to use uspl. But the problems still persist, and now i cant revert back to a previous cooked rom.
Any suggestions ?
Click to expand...
Click to collapse

Fallen Spartan said:
I agree, they can be confusing, but once you have mastered it, you'll wonder what the problem was!
What exactly are you confused with? What steps have you taken? Where are you now in the process?
Click to expand...
Click to collapse
Im fine, thanx, I have flashed my phone twice without big problems.
But the second time I got really confused when i tried to really understand it and followed the instructions step by step, it just sent me in a loop between all the different pages.
A simple question and a simple answere in the ROM-thread solved my confusion then, and now I just ignore the ramblings in the instruction pages.

Laurentius26 said:
The steps are as follow:
1). Flash hardspl
2). Flash a stockrom
...
Click to expand...
Click to collapse
I have a question about this. As my HD was replaced (warranty) I don't know which version I have (O2 or HTC). My first HD was a O2 branded with 1.14.207 ROM, the replaced one (from the same supplier) came with the 1.14.407 ROM which is the official German HTC ROM. I've just tried to download the newly released ROM by HTC, but the site states that the new ROM is not available for my device (but I could at least register the device). Could be that this is because it's an O2 device or probably because the new ROM wasn't yet released in German?
So is it really important to flash exactly the stock ROM (as the CID has to fit) or is it okay - like Laurentius said - to flash any stock ROM? Don't wanna brick my device when upgrading to 1.54/1.56...btw...why one has to go to a stock ROM when upgrading to 1.5x afterwards? Is there a difference when upgrading from 1.14 to 1.5x instead of 1.19 to 1.5x? I didn't get it yet...
Thanks in advance,
pal1m

pal1m said:
I have a question about this. As my HD was replaced (warranty) I don't know which version I have (O2 or HTC). My first HD was a O2 branded with 1.14.207 ROM, the replaced one (from the same supplier) came with the 1.14.407 ROM which is the official German HTC ROM. I've just tried to download the newly released ROM by HTC, but the site states that the new ROM is not available for my device (but I could at least register the device). Could be that this is because it's an O2 device or probably because the new ROM wasn't yet released in German?
So is it really important to flash exactly the stock ROM (as the CID has to fit) or is it okay - like Laurentius said - to flash any stock ROM? Don't wanna brick my device when upgrading to 1.54/1.56...btw...why one has to go to a stock ROM when upgrading to 1.5x afterwards? Is there a difference when upgrading from 1.14 to 1.5x instead of 1.19 to 1.5x? I didn't get it yet...
Thanks in advance,
pal1m
Click to expand...
Click to collapse
Any stock rom should do it as Laurentius said

A lot of confusion has come about from these newer cooked 1.56 roms so I wrote a guide. If you still have confusion please read the guide in my signature
Windows 7 is also most definitely not an issue. Several of us here are using it successfully.

Please help

Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks

futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
USPL and HSPL do this for you so you are able to flash a rom or radio. Read this page from wiki. It'll help you understand
Follow cRaCKwHoRe's guide on how to flash (can be found in my signature). If you intend to do a lot of flashing I'd flash HSPL as its permanent whilst USPL is temporary and you'd need to re-use it before every flash to new rom or radio
Latest HSPL can also be found in my signature

Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.

futurama said:
Ah excellent thank you so much.
So can I flash straight to the newest 1.56 rom from my current version which is 1.19.61.1WWE on orange?
Or is there a stage in between I would have to do.
Thanks again.
Click to expand...
Click to collapse
Flashing from one HTC stock rom to another you don't need to use USPL or HSPL. But going to a cooked rom you do.
Answer to your query is it depends on route you take. If you go down the USPL route you'll need to follow cRaCKwHoRe's guide. Would take to long to explain and he as already done a very good tutorial on the subject. If you go down HSPL route, all you need to do is flash latest HSPL then 1.56 rom

That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.

futurama said:
That clears everything up. one last thing, which rom would you reccomend? I like the look of the enwer roms with WM6.
Thanks again much appreciated.
Click to expand...
Click to collapse
I'm currently testing Dutty's V3.4. His V3.3 is already released but I'd wait for the new release hopefully in a few days. Both are based on WM6.1. Alternatively their is so many good roms out there. I'd also recommend Davideuck, EnergyROM & L26_THDV2.2 (Laurentius26). All very good roms by very good cooks. Best thing would be to try each of them and make your own opinion

thanks again mate, you are a legend, Ill post tonight to let you know how it went.

futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM?

futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that

yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.

davemazo said:
Does the phone really have to be unlocked before flashing a new ROM? I didn`t know that
Click to expand...
Click to collapse
There are a few forms of unlocking but the bottom line is that you need to bypass the checking which is done in the flash process.
One way is permanat as done once no issues anymore - HSPL
Another is as and when you need - USPL.
Wiki has a walk through that needs to be upated but I thought still was useable.
Flash the new 1.56 shipped rom and then move on to cooked roms. (will help you by pass the greenscreen issue)

futurama said:
Please Help
I really am going crazy with this rom flashing stuff. I have read the wiki for 2 days.
I understand I need to CID unlock my phone before I can apply cooked roms. But after countless searches I cant find clear info on how to CID unlock my phone.
This really is a last resort, I have been rading for 2 days with no certainty of what to do next.
Thanks
Click to expand...
Click to collapse
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.

futurama said:
yeeehooo got it all sorted and working!
Thanks everyone involved with XDA developers.
Click to expand...
Click to collapse
Sorry to hijack your thread futurama but I am having the same problem. Could you let me know how you did it

Thanks HDuser. Not sure if you know where I`m up to but originally I flashed my Orange 1.19.61.1 ROM with USPL and then flashed Duttys 2.7 1.56 based ROM which has given me the green screen problem. An earlier poster suggested I flash Olinex HSPL 1.54 to cure the problem. The problem I am having now is the phone refuses to sync with the PC. I have tried Vista and XP, the PC does not hibernate or sleep or anything, the phone is set to not switch off. It will usually sync on first connection but after a few seconds it will disconnect and therefore HSPL is reporting as being disconnected.
I have tried the earlier HSPL and HSPL 1.56 (as the ROM in bootloader screen is reported as being 1.56 and SPL is 1.14). I feel I`m going round in circles and its only a matter of time before I brick the phone.
I have read and re-read the wikis but I am now just getting more and more confused.

davemazo
Look the best way to approach any problem is to go back to the roots.
Flash a stock rom, find your own stock rom and refalsh it, then take it from there.
Your post is missleading and I have no idea were to sart. One issue is your PC ist does not Hibanate, not or go into sleep mode, at the saem time you are saying that you can't sync. Sounds like you have other problems and those other problems are making you have problems with your device.

Thanks HDuser. Sorry for confusing you, but I am now totally confused myself, Basically though the phone does not sync with the PC, I have tried 2 PC`s, with Vista and XP.
But back to your point about flashing stock ROM, I have tried a link in the wiki to download the one I need which is Orange 1.19.61.1 but the link seems to be broken and I don`t know where else I can get it. It doesn`t seem to be on the Orange website or HTC.

HDuser said:
Can you tell me were you got lost in wiki so that I can correct it in a more user frinedly version.
Click to expand...
Click to collapse
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.

futurama said:
There is a part on the black stone wiki that mentions I need to CID unlock my phone. It says you need to do this before you can flash roms, I felt it wasn't clear that, all I needed to do was flash HSPL in order to allow me to put new roms on.
This is what I did.
1:Flashed HSPL olinex 1.14.
2:Flashed HSPL Olinex1.56
3:Flashed MIRI WM6.5 10.0WWE
only part I had trouble with, my phone wouldnt let me flash the HSPL at first, I had to use a manual thing that you launch on the device the it lets you flash the HSPL.
Click to expand...
Click to collapse
It sounds as if you have it sorted now and everything working. As HDUser stated previously HSPL & USPL allows you to bypass the CID lock to enable you to flash new roms

Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back

futurama said:
Only thing I need clearing up, I can change my SPL back to the original version cant it?
Just incase anything goes tits up and I need to send it back
Click to expand...
Click to collapse
Of course you can. All information you need including original stock radio's, roms etc are available in wiki to download.

Some problems after I have flashed

Hi!
Today I've decided, after many reads to update my HTC Touch HD to a cooked ROM.
So I've followed this procedure and all was ok:
http://forum.xda-developers.com/showpost.php?p=3625567&postcount=272
I choosed the EnergyRom Leo Standard M2.5.
So first thing, my screen is blue since the start, but it became ok if I just turn off and up the screen.
Second problem, after 1-2 minute of use, the screen doesn't respond anymore.
I said ok, and I tried another rom, the XannyTechROM Grid Leo, and same problems! What is wrong?
Can you help me?
Thank you!

Your problem is classic for not having the correct SPL. You need to flash 1.56 or greater. Please refer to this thread: http://forum.xda-developers.com/showthread.php?t=505377, and in the future post all questions there. Good luck!
S3

Sean3 said:
Your problem is classic for not having the correct SPL. You need to flash 1.56 or greater. Please refer to this thread: http://forum.xda-developers.com/showthread.php?t=505377, and in the future post all questions there. Good luck!
S3
Click to expand...
Click to collapse
Okay, so if I understand good, I must use HSPL instead of USPL?

You can also flash an official ROM with 1.56SPL and use USPL.

If I want to update to one in french, I absolutely need to use this one:
RUU_BlackStone_HTC_FRA_1.56.406.1_Radio_52.62.25.34_1.13.25.24_Ship.exe?
Because the download is very slow :S

I just finish to download and install the previous ROM, but it's written now SPL-1.54 in the boot loader, will it be enough?

Nargzul said:
I just finish to download and install the previous ROM, but it's written now SPL-1.54 in the boot loader, will it be enough?
Click to expand...
Click to collapse
Before flashing any rom based on 1.56+ you need to have either SPL 1.56.Olinex (using HSPL) or SPL v 1.15.USPL (Using USPL)
All this info can be found in dummies guide thread. No need for another.
Thread closed

Remove Hard-SPL

Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!

http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.

You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.

I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error

The instructions say to flash the stock ROM before you re-lock SPL.

I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!

ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go

Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...

Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...

Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!

Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there

:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540

The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.

Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!

I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved

You are right. Thanks again

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.

ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.

jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.