Database Develop

Stuck At 28%

I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.

should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL

which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.

i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special

Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.

can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here

i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.

I have the same problem with 28% stucking
I try to reflash but I still have the same

do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already

I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?

I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps

you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?

Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm

Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!

I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck

Help!My Blackstone fails to accept a WM6.5 rom, as it used to the past!

Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!

gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?

I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?

Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!

xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!

I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.

gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?

Bad Flash?

Ok, here's what i did:
I'm sending my xperia back to vodafone, so i need to restore stock rom and spl. I flashed a NL Vodafone R3AA rom (found here) to my phone yesterday, which worked perfectly. Did a hard reset, and went on with restoring stock spl.I tried using the special RUU with a replaced stock spl .nbh (the method described in one of the topics here), but the RUU couldnt find my phone. Since i didnt have another PC here, i tried to flash the .nbh to my phone via the micro SD method.
This went well, the progress bar filled up and disappeared, followed by 10+ minutes of "loading". Advised by a friend, i pulled out the battery, put it back in the device and powered it on. The phone instantly booted, showing the bootloader-screen and saying it's going to resume flashing the device. Followed by another endless "loading" screen.
But, since i got a chance to look in the bootloader-screen, I saw the SPL version was now 0.72.000 (or something like that, at least the OliNex text was gone). Afaik, this means the stock spl is back. I tried replacing the stock spl Kovsimg.nbh with the default one provided with the custom RUU (which is OliNex HardSPL, right?), but it showed the same "loading" screen. I havent tried flashing the rom again, since the bootloader says it's on stock spl at the moment...
What can i do? I guess they dont accept bricks over at vodafone...
Thanks in Advance,
Sorbo

using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!

You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.

Ok guys, thanks for the replies
Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
The phone is back on stock spl, is it possible to flash a rom? Or only stock roms? (Sorry for my dumb question, havent been into flashing for a few months now)
aethelbert said:
You also need to flash the radio back to stock (not sure what version it is, but it's around here somewhere) otherwise you'll face flash issues. This means flashing HardSPL flashing the radio, flashing StockSPL again and return. Also, best flash R2A. Not sure if R3A was ever properly released.
Click to expand...
Click to collapse
Ok, thanks for the tip R2AA it is!
When flashing the rom the radio was also updated, but i'll try this

R3AA was properly released!
if you want to be cure of complete stock why not just use SEUS?
and there is no need to flash radio with stock ROMs as they're included, all your doing is flashing a radio extracted from a stock rom anyway! this means you don't have to hardspl

Jonny4911 said:
using the usb cable and the ROM flashing Custom_RUU.exe
flash the R3A Rom again. that should fix it not booting!
Click to expand...
Click to collapse
And this was the winning tip. Just flashed back the R3AA rom (vfone NL), even though i doubted if it would work (since the bootloader said it was back on stock spl), but it did.
Phone works again. Bootloader now says 0.78.000 (or something like that, no OliNex), so i guess it's ok now. RUU still isnt able to flash the phone, tried on 3 different pc's ( win7 x64, vista x86, xp x86), but i cant flash the phone...
Ah well, i'll try to send it back, see what they come up with. Thanks a bunch!

Error 626 when hard spl

I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.

go to olinex hard spl section and write about your problem maby they can help u

Onlinex hard spl section?
I must be blind. Where is that?

matejdro said:
Onlinex hard spl section?
I must be blind. Where is that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=431218
go here

matejdro said:
I have successfuly flashed my X1 and im installing costum rom on them.
But now friend came with his X1 wanting me to install custom ROM on it.
I started Hard SPL unlocker and everything gone OK until it came to bootloader mode. Windows installed all drivers without problems but progress bars on both phone and pc were at 0%. After about half minute waiting at 0% it thrown out error 626. After that i taken battery out and back in and phone boots normally with Stock SPL.
A am suspecting that problem is in Stock SPL version. I have 0.72 while in Hard SPL thread it says 0.52 and maybe Hard SPL is not supported on this version.
I have searched about 626 but didnt find any solution.
Please help.
Click to expand...
Click to collapse
Just got that error yesterday while updating my Rom and OS go to Settings, Connections, USBto PC, then choose active sync and check enable advance network. You might need to reboot your host pc to recognize changes on you mobile device.

Tried both checked and unchecked and dont work

I have managed to solve it!
Problem was newer Stock SPL.
What i did is installed image that contained old 0.52 SPL and now i can finally install Custom ROMS

Great!!! I will remember that one too.

[Q] Rebooting, gets stuck at bootup screen

Hi there
I just bought a new Topaz. I have HardSPL and then tried to apply a new ROM. Now it keeps on rebooting - it only gets to the screen where it says TOUCH DIAMOND 2 - and the the red numbers appear in the lower right corner - and then it reboots..
Is it bricked or is there anything I can do??

I tried to hard reset - but it still keeps rebooting

No not bricked.
Must be an incompatible ROM or you didn't HSPL to 2.51.
Just find another ROM, Stock or otherwise (since you are HSPL'd, but check your version first), go into Bootloader Mode and flash with RUU.exe.

Thank you Bruce!!
I'm still having problems though. I have tried to install a few different stock ROM - both 6.1 and 6.5. Everytime the same issue - I get stuck on loading the new ROM and it keeps rebooting.
I have tried to upgrade spl to 2.51 but still the same issue
What else can I do??

What does your SPL show in bootloader mode?
Make sure it has Olinex as a suffix.

Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?

niknik76 said:
Thanks again Bruce,
Yes it says Olinex.. When I first got the phone I tried to install a new ROM and I forgot to do SPL first - could it be that something serious went wrong in that attempt?
Anything else I can try?
Click to expand...
Click to collapse
Is it 1.83.Olinex or 2.51.Olinex?
Flashing a ROM w/o HSPL will most certainly mess up your device but it should be recoverable if you can find your stock ROM for your carrier and region.
You symptoms sound as if you are on 1.83 trying to flash 2.51 SPL ROMS.

Hi, im having the same issue as OP, i tried to flash the latest Energy rom (sept 8) onto my td2 and the bootscreen is showing 1.83.Olinex. What do i do to fix this?

You must have HSPL 2.51 for this ROM and for all newest roms.