so i was trying to revert back to the stock SPL, and i downloaded Restore-SPL-1.15, and i opened it up and renamed the file to BLACIMG and placed it on the storage card and flashed it and now, the phone loads in bootloader mode and says error and is stuck on the loading... screen i think i really ****ed myself over... can any of you guys give me some advice on what to do?
As far as I know, you must flash stock ROM before going back to the stock SPL. Your problem is probably caused by having stock SPL with non-stock ROM.
Somebody with more experience might offer a better solution, but I would suggest you to read about USPL, I believe USPL is the cure for your problem, read about the details.
So have you successfully flashed the stock SPL? If so, try flashing a stock rom now, use the SD card method (blacimg in root storage card + hold vol up/down and power), if this works then its what vizier said, you can not run a non-stock rom on a stock SPL (without USPL). But then you will be able to continue flashing .
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
itzjonjon69 said:
i took out the SD card and put the stock 1.56 rom and flashed it and everything is fine now, im running the stock 1.56 rom and SPL 1.54 whhheeeewwww
Click to expand...
Click to collapse
Haha good good... I was about to tell you to read the guide in my signature... but I am glad you got it fixed bud!
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
RUUNBH
BLAC100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
reyber said:
please can somebody help me
i have the same problem and if i open my hd with power button it goes automaticly to bootloader. it shows :
blac100 32M
spl-1.54.0000
microP-Blackstone (led) v6
upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
cRaCKwHoRe said:
Looks like you have upgraded your SPL to 1.54. This is ok. You can now install any 1.56 based rom whether it is the stock HTC rom or a cooked rom. If you are wanting to install a cooked rom you will need to run USPL before flashing it. Read the guide in my signature for more information. It covers this step-by-step
Click to expand...
Click to collapse
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
reyber said:
look when i open uspl its ok
but when it begins with flashin after 1 second the hd goes black
and than comes this screen again
i am trying to flash the L26 rom v2.1 but its not working
i had changed the name of the rom from RUU_signed.ngh to BLACIMG.ngh
and put that in the storage card. i always did it like this but i had used uspl for the first time. do you think that if i use a other rom like dutty 2.9 on the storage card with uspl it work? or is there something wrong with the uspl of how i use it.
when i get to the uspl it asks me of i want to flash my rom
normaly when i flash a rom i only see:
BLACIMG.NBH
but now i see:
BLACIMG.NBH
BOOTLOADER: ..
SPLAS1:..
RADIO_V2:
SO CAN YOU PLZ HELP
thx for the effort
Click to expand...
Click to collapse
It's actually quite hard to flash a rom from the SD card when using SPL... you have to remove and insert the SD card at appropriate times... I would recommend doing it over USB as also suggested by many others.
Have you tried loading said rom over USB when phone is in bootloader and USPL is loaded?
it worked like a charm
i want to thank you very much for your effort
reyber said:
it worked like a charm
i want to thank you very much for your effort
Click to expand...
Click to collapse
Awesome, glad to hear!
Morning all,
I think I've done the same thing. I have stock SPL and a non-stock ROM... I'm on SPL 1.14... I'm a bit stuck because nothing will seem to load on to via USB...
I tried running "RUU_BlackStone_HTC_WWE_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe", but the phone simply reboots to the bootloader, the bottom text changes to 'USB', but it goes no further. It eventually shows Error 262 (comms error).
Any ideas?
Thanks!
------
EDIT: Managed to resolve this by using USPL to put back HardSPL by OliNex
I have a no brand HTC Touch HD (italian)
I installed hardSPL 1.56 and then a cooked ROM
After restart I wasn't able to get my phone working
If I try to force through the connection setting, my HD simply "freeze".
I tried a second cooked ROM and got the same problem.
Any idea?
Could I install the previous stock ROM without erasing hardSPL?
Thanks
You need to install stock SPL to flash stock ROM. Do that and try again
Thanks... the problem was that I had the wrong HardSPL!
Hereticus said:
Thanks... the problem was that I had the wrong HardSPL!
Click to expand...
Click to collapse
no prob dud. good that you sorted it out.
Hi all
I did hard SPL for my X1 then updated to Energy ROM regularly, then I did stock SPL before I go back to original ROM 6.1 , now the device won't SPL anymore and won't ROM update, it just get stuck in bootloader and shows (Loading....)
Please any suggestions
I'm very desperate
Regards,
MK
Help please !!!!!
You shouldn't have reverted to stock SPL before downgrading to stock rom. Try to load hard-SPL again.
I did but still no response, still stuck on bootloader and only (Loading...) appear
MAkS1 said:
You shouldn't have reverted to stock SPL before downgrading to stock rom. Try to load hard-SPL again.
Click to expand...
Click to collapse
So how is it done? Are you supposed to apply the stock SPL after you have updated with the original rom? I mean is good to know cuz i might roll back the phone one day.
xudo said:
So how is it done? Are you supposed to apply the stock SPL after you have updated with the original rom? I mean is good to know cuz i might roll back the phone one day.
Click to expand...
Click to collapse
Spl should ALWAYS be done LAST.
MK X1 said:
I did but still no response, still stuck on bootloader and only (Loading...) appear
Click to expand...
Click to collapse
Which hard spl are you using?
flash a r3 rom using mSD...should work fine
Make sure that you are either using the SD card to flash, or it is removed.
If agent's idea doesnt work, search for mtty.exe or drop me a PM. same thing happened to me and i was tripping balls
Is anyone working on this anymore? Just curious.
Yeah my old HTC Vox had an USPL, this was much better then the HSPL. The USPL was automaticly overwritten if I restored an official HTC ROM. If i installed the USPL I could flash any custom ROM i wanted till i reflashed a official HTC ROM.
If your phone has problems it's much easier to restore to factory settings
Grtz,
FeareX
The other thing is a lot of the problems on the kaiser were solved by flashing the spl that matched the rom you were using. Does this still hold true?
sd73ta said:
The other thing is a lot of the problems on the kaiser were solved by flashing the spl that matched the rom you were using. Does this still hold true?
Click to expand...
Click to collapse
That would hold true for any phone, but on Rhodium it doesn't really matter because there are currently so few SPLs. If I remember correctly, they're only 2, and only the HardSPL based off of the latest one is available for download.
Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom