Related
I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.
should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL
which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.
i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special
Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.
can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here
i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.
I have the same problem with 28% stucking
I try to reflash but I still have the same
do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already
I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?
Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.
racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.
racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck
Hi All,
I have used the search function - but ended up getting confused.
I have a Touch HD that I bought in January of this year (2009) from Mobiles.co.uk (Carphone Warehouse) and is on the O2 network (UK).
I have been using Dutty's ROMs (both 6.1 and 6.5) for months now - and have always used USPL when flashing, using the SD card method.
Over the past 3 days, my HD has been playing up.
When it started, I was using Dutty's R7. The radio was 1.14.something.something. The device was working perfectly, and I was really happy with the ROM and the way the phone was working. I had installed NO other applications with the exception of a different taskbar and obviously SDKCerts.cab
First of all, HTC Sense stopped working - it would cycle between "Loading HTC Sense" and "Tap here to launch HTC Sense"
Then, when rebooting the device, it just hung on the "Smart Mobility" screen. I left it in case it just needed a while to boot, but nothing.
I had no other option than to hard reset.
It worked OK for a few hours, but then HTC Sense started to crash again. So I flashed a new ROM - Lost in Asia or whatever it is called.
Same symptoms.
I flashed Dutty's R7 back and also the new 1.17 radio.
No joy.
The phone also hangs for ages on the Smart Mobility screen - perhaps a full minute where as before, it used to be no more than 15 seconds or so.
The following is displayed on the "Smart Mobility Screen"
1.17.25.09
52.69.25.37H
1.59.Dutty
The bootloader screen (before running USPL) shows the following:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) V6
So the question I'm asking - is... Is my phone suffering some kind of hardware malfunction, or is this a known and fixable fault that I somehow have caused?
If the phone looks like it is malfunctioning, how would I go about returning it to stock so that the CPWH repair centre do not know it's had an unofficial ROM installed?
I'd like to add that whilst I'm very PC literate, I'm no programmer and a lot of the stuff here is alien to me hence my confusion - I just know how to flash a new ROM etc.
Thanks to anyone that takes the time to help me - I'd be really thankful to anyone that helps me sort this - be it tell me how to fix the device, or tells me to take it back!
Thanks in advance & Regards,
Chris.
Will D/L and flash Dutty's R0 Holy Grail ROM and see if that makes a difference...
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
a1gp said:
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
Click to expand...
Click to collapse
Thanks for the quick reply.
So is it perhaps better to revert to the original ROM before flashing a cooked ROM? I always Hard Reset twice after flashing as understand this helps.
OK - so the 1.56+ situation - I was under the impression that using the latest USPL (2.5) when flashing was OK? I have never had the colour problem... but perhaps if I'm flashing wrong then these problems could be to do with this?
Thanks again...
Chris
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
mcdull said:
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Click to expand...
Click to collapse
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
a1gp said:
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
Click to expand...
Click to collapse
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
constablechris said:
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
Click to expand...
Click to collapse
what do you mean hang for age?
1 minute is nothing if it turns out boot up.
There are chances that the nand flash needs to refresh and wasted some times. But it won't be forever.
constablechris said:
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
Click to expand...
Click to collapse
there's an original rom on htc.com for blackstone just use that one.
hope it will turn out right for you
I thought I'm the only one who had this problem. Last Sunday my blackstone started to freeze on the smart mobility screen too. I flash 3 different roms because I thought its an rom issue with no luck. On Monday it even managed to hardreset itself after I waited for about 15 min in the smart mobility screen.
After that I flashed a stock rom and it seem to be fine by now.
But now I will flash a custom again, the stock one is so 6.1
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!
I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.
gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?
Good morning,
im opening a new thread because i didnt find an answer for my problem.
I got my Blackstone running with HSPL1.56+ olinex, 1.17 radio and using different roms like dutty or miri ones... so everthing works fine since I tried to flash the new dutty rom holy grail R2... after that my screen s displsaying the colours wrong like in 256colours graphic. some colours like green and purple are flickering...
I tried to change from HSPL to USPL but it wont help...moreover i flashed the USPL and flashed with 1.56 stock rom without success
dont know what to try
thanks in advance
zwon
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
afr33s said:
Mybe a coincidental hardware problem... but just a guess!
Use my mobiler and see what the phone looks like on your PC?
Click to expand...
Click to collapse
i think so too
hm on my pc its looking good...
gagi75 said:
or is it wrong rom... i gess is about grafick try to put out batery thehn back turn on then when boot do soft reset i have smilary problem
Click to expand...
Click to collapse
i think not because i flash roms which i got working before
take out battery i tried a few times...last night my hd had no batt^^
i wos instal ok rom but each time when i do reset he goes off he wont start then i remove batery off then put back and start he goes up then when i see on screen smart mobilty is write tu soft reset and is ok all.i have thet problem and solwed...do what i do meybe help
sory for english
Update your hardspl to version 1.56
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Fallen Spartan said:
Does your SPL match rom, i.e. if a rom based on 1.56+ you need HSPL 1.56
Click to expand...
Click to collapse
yes i tried... flashed the hspl 1.56+ before and using it with the equal spl version but wont fix my screen
i tried a many different solution but nothing would solve it
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
sure? than sorry.. dont saw it
ill give it a try
meska said:
flash to stock rom, revert spl to stock and reflash stock rom.
use the newest stock rom available, after that HSPL again and everythings good to go.
have a look at the wiki, the problem is described pretty well.
regards
Click to expand...
Click to collapse
how to revert to stock spl?
ok find it by myself....would 1.54 be recommend or later? or could you even post the url where i find this in wiki??
dont find it
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
meska said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
have a look under the greenscreen section... 1.54 will just be fine.
Options if you have Olinex 1.14 HSPL installed then installed a 1.56 rom and now have greenscreen
* (Not recommended) Revert back to stock SPL (using Restore-SPL-1.xx from HSPL thread)
* Update HSPL to 1.56 (After flashing HSPL 1.56 your device will reboot and the greenscreen problem is gone.)
* Or Use USPL 2.5
or send me a PN i can help you via ICQ even in german.
regards
Click to expand...
Click to collapse
so i tried this with all 3 kinds of stock spls...1.54 even too but it wont work
seems to me as it would be an other problem as the Greenscreen issue
yeah would be nice if you could help me with that tomorrow
ill add u in icq
Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom