Database Develop

Broke Tilt in half

So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?

wshader said:
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
Click to expand...
Click to collapse
Check thi site, there is a manual how to dismantle kaiser. Could be helpful:
http://michael-channon.spaces.live....smantling+%2f+Disassembling+Guides+HTC%2fETEN

Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing. And alot of steps missing to get it this way.

wshader said:
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing.
Click to expand...
Click to collapse
OMG, that had to hurt.

Yeah, kid was playing basketball and fell out of his pocket. I guess the kid has broke 4 phones this month... curve, tilt, 2 pantec duos. Told my friend to get him a $20 go-phone now lol. And use the savings to get me a tilt
I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)

wshader said:
Yeah, and I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
Click to expand...
Click to collapse
I hope u repair it. Wish u luck.

Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
I suggest trying to find one broken on ebay and using the 2 you have to make one working phone. Even a broken Tilt can run for $200 on ebay though.

Anyone notice that case has already been replaced at some stage as it has a camera hole (not standard for Tilts) a keyboard without the white part and no logo. Perhaps the replacement was weaker than the original one. If the O/P searches the forum here for LCD Screen replacements there's loads of links to different companies supplying parts for Kaiser variants. I have no experience using any of them though so cant suggest which ones are best.

@Planet Neo
Yeah I was thinking that but was hoping it wouldn't come to that. Would suck to spend $200 for parts just to find the motherboard is broke or something to that effect. Was hoping someone knew of a place to buy a new cable or had one to sell. Also was hoping someone with some experience could let me know if they think I'd need a new tilt assembly.
@Flying Kiwi
Lol, I used a picture from kaiser disassembly guide to show what i was referring to. It has the standard tilt case. I'll be taking pictures of what I have as soon as I have the phone in my possession.

Okay I assume that its going to be very hard to get the ribbon and you're going to need housing. I believe that it will be the same as making a new tilt, because the screen is as good as dead without the ribbon so all you could do is get new housing and a new screen and it should rack up about $150-200. Which in my opinion is much easier and faster and better than frustrating on getting a ribbon.
Just my 2 cents.
Kraize

Planetneo said:
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
Click to expand...
Click to collapse
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S

Mysterious Stranger said:
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Click to expand...
Click to collapse
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.

Planetneo said:
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Click to expand...
Click to collapse
These things are made in Shenzhen so where you think the parts come from?
Stop talking &*%(* and I'll stop correcting your posts Instead of saying something is a fact say it's your opinion. It's not a 'rare' part - and they ship WORLDWIDE. It's not as if he'll get one from a local mom and pop store - it's gonna be mail order wherever you get it from and looking at the seller's feedback is a good judge - all my parts come from China - so why pay a middleman such as yourself extra $ just so it has a US stamp on the package?
Someone needs to act as quality control on your posts and it looks like it's gonna have to be me if you keep posting [email protected]
M.S

Need Parts for Nexus One

I cracked my screen so I decided to order a new one and fix it myself, while in the process I accidentally tore the top flex circuit board and now I can't find spare parts other than screens anywhere. Does anyone know where I can get some or have one that is broken I am willing to pay ...

Hate when **** like that happens. . . try to fix something and something doesn't go right.
Not sure where you can get the parts you're looking for, but wanted to give props to you for taking the initiative to try and fix it yourself. Alot of people will be like "that's what you get for not just sending it back to HTC and having them fix it." How're you going to appreciate the intricacies of something if you don't take the occasional risk like this?
Hope you find what you're looking for.
Ps. Have you looked at http://www.monoprice.com/home/index.asp to see if there's anything you could repurpose to work?

Ha yea, I am definitely a DIY-er. Unfortunately this is a risk I knew I was taking heading into it, wasn't too worried though because I have fixed a lot of cell phones in the past, just got a little too careless with prying open with a flat head screw driver, it slipped and cut right into the flex circuit board. Should have been a little more careful haha. New screen looks great though! Now only if I could get it to power on! Of course HTC tells me it will cost up to $300 to send it to them to fix it.

http://www.lunacommerce.com/154-nexus-one
http://www.google.com/support/forum/p/android/thread?tid=7921c16b7b46096e&hl=en

Not sure exactly, but is this what you are looking for? http://cnn.cn/shop/google-nexus-digitizer-p-8252.html

Yea I tried that number and also that lunacommerce site is located in China, no prices on their website, no way to purchase anything other than contacting them first (which I have tried to no avail...). You would think some online store somewhere would have started selling spare refurbished parts. Whatever, guess I will have to pay HTC to fix it, kinda sucky.

If you find somewhere that can help you, please post back. I just had a similar experience, replaced the digitizer and the display wouldn't work afterwards. Figured I had damaged the AMOLED, so purchased another. Problem still persisted.
I've decided that I must have damaged the AMOLED connector on the logic board.
The upside is I can still use the phone when connected to a PC and using Android Screen Monitor.
So now I've ordered another Nexus One, I find it hard to get by without my daily Android.... it became an expensive drop of the phone.

Kman Gymrat said:
Not sure exactly, but is this what you are looking for? http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
Click to expand...
Click to collapse
No that is what I replaced in the first place. I am looking for the Logic Board. I will keep searching and update this thread if I ever figure it out. Going on 3 days without a phone and only being able to use Google Voice via my computer is starting to drive me insane!

Nexus One Screen problems

So it just happened this past Friday, a white bar appeared on the right side of my phone's screen and shortly after my phone ran outta batteries. When I plugged it in to charge the screen just slowly showing a blossoming of pixel colors all over the screen. If i leave it alone it will boot into the OS fine and I can hear all my notifications and everything seems to work fine but the screen just turns black with a thin blue bar of light on the top. Is there anyway to fix this aside from replacing my screen? and is it a digitizer problem?

now the screen is just completely black when i turn it on, but it is still responsive. I can still unlock and open apps and swipe the screen, etc. Does anyone know what is wrong and what needs to be replaced? Please help!

Zephyron said:
now the screen is just completely black when i turn it on, but it is still responsive. I can still unlock and open apps and swipe the screen, etc. Does anyone know what is wrong and what needs to be replaced? Please help!
Click to expand...
Click to collapse
your LCD has gone bad. this is a fairly easy repair, but there are a few places you need to be VERY careful or you can break things (like your power button)
the Nexus One has TWO different models of LCD and you HAVE to use the one that was originally in your phone.
One is made by Samsung and is fairly common/easy to find. its gonna run you about $30-50
There is also an LCD made by Sony which is a little more difficult to find (and mostly used on the Desire) but it costs anywhere up to $100+ so lets hope thats not yours :]
if you arent comfortable doing the repair there is a company called Cell Phone Repair that has stores in almost every state and they even take mail orders if you are not located near one.

nickL0V3 said:
your LCD has gone bad. this is a fairly easy repair, but there are a few places you need to be VERY careful or you can break things (like your power button)
the Nexus One has TWO different models of LCD and you HAVE to use the one that was originally in your phone.
One is made by Samsung and is fairly common/easy to find. its gonna run you about $30-50
There is also an LCD made by Sony which is a little more difficult to find (and mostly used on the Desire) but it costs anywhere up to $100+ so lets hope thats not yours :]
if you arent comfortable doing the repair there is a company called Cell Phone Repair that has stores in almost every state and they even take mail orders if you are not located near one.
Click to expand...
Click to collapse
I have the original n1 when it was first released and is this the company you were referring to? http://www.cellphonerepair.net/

nickL0V3 said:
your LCD has gone bad. this is a fairly easy repair, but there are a few places you need to be VERY careful or you can break things (like your power button)
the Nexus One has TWO different models of LCD and you HAVE to use the one that was originally in your phone.
One is made by Samsung and is fairly common/easy to find. its gonna run you about $30-50
There is also an LCD made by Sony which is a little more difficult to find (and mostly used on the Desire) but it costs anywhere up to $100+ so lets hope thats not yours :]
if you arent comfortable doing the repair there is a company called Cell Phone Repair that has stores in almost every state and they even take mail orders if you are not located near one.
Click to expand...
Click to collapse
He told you everything in detail already, but if you are a newbie and have never done things like this, i suggest you find some other people to get your phone repaired, it cost much less to pay a screen repair fee than get a new one

Zephyron said:
I have the original n1 when it was first released and is this the company you were referring to? http://www.cellphonerepair.net/
Click to expand...
Click to collapse
thats the one

You tube instuctions
There are a bunch of videos on youtube on how to replace a Nexus One LCD screen...

Is my cappy dead?

Hi XDA,
I have an i9000 and a Captivate. One sad day last week, I dropped my captivate and cracked the screen . When plugged in or powered on, the 4 soft touch-keys at the bottom do light up and I can press them (they go dark as I press them, then light back up as they normally would).
I'm OK with paying $80 for a replacement screen/digitizer on ebay, as long as I know that will fix my phone. I'm worried that something else may be wrong internally?
Is there any way to check the functionality of the phone (perhaps through ADB?) or something I can do without having the screen turn on to prove that this phone will still work once I buy a new screen?
Thanks

Usually it is just due to the fact that the LCD is broken and can't display anything, at least that's what I would assume. You can try adb but that relies on the fact that you had usb debugging turned on beforehand. Another option would be to sell your cappy on eBay; broken phones can go for a decent amount, and you can find a new phone for a decent amount too.

Kops said:
Hi XDA,
I have an i9000 and a Captivate. One sad day last week, I dropped my captivate and cracked the screen . When plugged in or powered on, the 4 soft touch-keys at the bottom do light up and I can press them (they go dark as I press them, then light back up as they normally would).
I'm OK with paying $80 for a replacement screen/digitizer on ebay, as long as I know that will fix my phone. I'm worried that something else may be wrong internally?
Is there any way to check the functionality of the phone (perhaps through ADB?) or something I can do without having the screen turn on to prove that this phone will still work once I buy a new screen?
Thanks
Click to expand...
Click to collapse
I would be more concerned about what could possibly get damaged or broke during the screen replacement more than what internal damage dropping it caused.

m1batt1 said:
I would be more concerned about what could possibly get damaged or broke during the screen replacement more than what internal damage dropping it caused.
Click to expand...
Click to collapse
Same, I don't recommend doing a replacement like this unless you know what you are doing. You might put it all back together just to find that wifi or something else randomly is broken.

I found a captivate with broken charger port on Kijiji for $40, and used that one as a parts phone. Stole the screen, and everything works great again .
I am studying Computer Engineering, taking these things apart is right up my ally. Just didn't want to waste money for nothing =/
Thanks all

Kops said:
I found a captivate with broken charger port on Kijiji for $40, and used that one as a parts phone. Stole the screen, and everything works great again .
I am studying Computer Engineering, taking these things apart is right up my ally. Just didn't want to waste money for nothing =/
Thanks all
Click to expand...
Click to collapse
Glad it worked out for you. Nice choice of major, that's going to be mine also.
Sent from a jelly bean

Motherboard (Daughter-board) Replacement

Hello.
I have to change the small motherboard, or like I see it also called daughter-board, because phone vibration stopped working and even changing the motor didn't work.
My board is with number 50H10209-02M-A (2012-12-21). But I found that there's also the same board with number 50H10209-32M-A (2012-12-21) which I can get a little cheaper. Do you know if there is any difference and if I can buy 50H10209-32M-A or I have to stick with 50H10209-02M-A?
I tried to find information in Internet but nothing...
Any help will be appreciated. Thanks!

papinho said:
Hello.
I have to change the small motherboard, or like I see it also called daughter-board, because phone vibration stopped working and even changing the motor didn't work.
My board is with number 50H10209-02M-A (2012-12-21). But I found that there's also the same board with number 50H10209-32M-A (2012-12-21) which I can get a little cheaper. Do you know if there is any difference and if I can buy 50H10209-32M-A or I have to stick with 50H10209-02M-A?
I tried to find information in Internet but nothing...
Any help will be appreciated. Thanks!
Click to expand...
Click to collapse
get the same one or else this will happen, (http://forum.xda-developers.com/htc-one/help/phone-rebooting-loop-replacement-t3442504#post68312039) do you have an unlocked model?

Oh noes....my volume down switch went bad so I just blindly ordered a daughter board from eBay
(no part numbers given on listing, lulling me into a "they are all the same" attitude)
What are the chances I got the wrong one and am no closer to getting it 100% working??
It arrived today but I am not going to attempt fitting it yet or comparing part numbers as I am still waiting on a new screen/digitizer to arrive from China/ HK
The fewer times I have it open the fewer chances of screwing it up
Not having a working volume down I suppose I can live with in a worst case scenario
(this phone is NOT for me and the new owner - My Mrs - is not going to go anywhere near recovery/fastboot/bootloader and is currently back to stock and having it jammed on full volume /may/ mean she will actually hear the phone ringing and increases the chances of her picking it up!)
Regards
Rob

Sure enough, the board I ordered - despite the image of the 50H10209-02M-A board the seller sent me a 50H10209-32M-A
He wants me to send it back to China before a refund is given (at my cost)
As I only paid £7 for the board I guess I'm stuck with it and out of pocket as postage would likely be more than that
The screen also arrived and works great - but the LED's under home and back button have been stuck down wrong - so the LED's don't light the buttons by the HTC logo... but put an annoying glaring white light into the screens corner :/
Seller asked if a partial refund would make me happy which I just replied yes to
A whole £1 refund was waiting for me when I got home...sigh
There's a lesson to be learned here but I'm 100% sure I will get bitten a few more times before I put principals before the wallet
Off to find ways of disabling the home and back LED before it drives me round the twist
Regards
Rob